diff options
author | Tom Rini <trini@konsulko.com> | 2016-05-25 12:32:56 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2016-05-25 12:32:56 -0400 |
commit | 82f2a144917d6cc5f8a9a49b1a1a15b0fb5742d5 (patch) | |
tree | 0b42c7680119067fd1d171f482d34ca0975f67a1 | |
parent | 1b80e79586b0b777afa6a905961000c8495828cc (diff) | |
parent | 0e6e34ac8dbb597a34e1eca4fb640c3eb5e52467 (diff) |
Merge branch 'master' of http://git.denx.de/u-boot-sunxi
109 files changed, 740 insertions, 1225 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 729b1816bf7..5fd20b97360 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -538,7 +538,16 @@ config TARGET_CM_T43 config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" + select CMD_BOOTZ + select CMD_DHCP + select CMD_EXT2 + select CMD_EXT4 + select CMD_FAT + select CMD_FS_GENERIC select CMD_GPIO + select CMD_MII + select CMD_MMC if MMC + select CMD_PING select CMD_USB select DM select DM_ETH @@ -546,6 +555,7 @@ config ARCH_SUNXI select DM_KEYBOARD select DM_SERIAL select DM_USB + select HUSH_PARSER select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d1f8e224514..bd68698e967 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -218,7 +218,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-pc.dtb \ sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN50I) += \ - pine64_plus.dtb + sun50i-a64-pine64-plus.dtb \ + sun50i-a64-pine64.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/dts/pine64_common.dtsi b/arch/arm/dts/sun50i-a64-pine64-common.dtsi index d968d764b8b..d5a72494645 100644 --- a/arch/arm/dts/pine64_common.dtsi +++ b/arch/arm/dts/sun50i-a64-pine64-common.dtsi @@ -40,7 +40,23 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "a64.dtsi" +#include "sun50i-a64.dtsi" + +/ { + + aliases { + serial0 = &uart0; + }; + + soc { + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; &mmc0 { pinctrl-names = "default"; @@ -57,20 +73,8 @@ status = "okay"; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; - status = "okay"; -}; - -&uart4 { +&i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; diff --git a/arch/arm/dts/pine64_plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts index 5daff514e2e..549dc15bd5d 100644 --- a/arch/arm/dts/pine64_plus.dts +++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts @@ -42,15 +42,11 @@ /dts-v1/; -/memreserve/ 0x45000000 0x00200000; -/memreserve/ 0x41010000 0x00010800; -/memreserve/ 0x40100000 0x00006000; - -#include "pine64_common.dtsi" +#include "sun50i-a64-pine64-common.dtsi" / { model = "Pine64+"; - compatible = "pine64,pine64_plus", "allwinner,a64"; + compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; chosen { stdout-path = "serial0:115200n8"; diff --git a/arch/arm/dts/pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts index dcc998f24cf..ebe029e8a8d 100644 --- a/arch/arm/dts/pine64.dts +++ b/arch/arm/dts/sun50i-a64-pine64.dts @@ -42,15 +42,11 @@ /dts-v1/; -/memreserve/ 0x45000000 0x00200000; -/memreserve/ 0x41010000 0x00010800; -/memreserve/ 0x40100000 0x00006000; - -#include "pine64_common.dtsi" +#include "sun50i-a64-pine64-common.dtsi" / { model = "Pine64"; - compatible = "pine64,pine64", "allwinner,a64"; + compatible = "pine64,pine64", "allwinner,sun50i-a64"; chosen { stdout-path = "serial0:115200n8"; diff --git a/arch/arm/dts/a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index f3ad00024a7..1bd436f8470 100644 --- a/arch/arm/dts/a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -1,7 +1,7 @@ /* * Copyright (C) 2016 ARM Ltd. * based on the Allwinner H3 dtsi: - * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -46,19 +46,10 @@ #include <dt-bindings/pinctrl/sun4i-a10.h> / { - compatible = "allwinner,a64"; interrupt-parent = <&gic>; #address-cells = <1>; #size-cells = <1>; - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -93,18 +84,29 @@ }; psci { - compatible = "arm,psci-0.2", "arm,psci"; + compatible = "arm,psci-0.2"; method = "smc"; - cpu_suspend = <0xc4000001>; - cpu_off = <0x84000002>; - cpu_on = <0xc4000003>; }; - memory { + memory { device_type = "memory"; reg = <0x40000000 0>; }; + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -136,7 +138,7 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { + pll1: pll1_clk@1c20000 { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-pll1-clk"; reg = <0x01c20000 0x4>; @@ -144,7 +146,7 @@ clock-output-names = "pll1"; }; - pll6: clk@01c20028 { + pll6: pll6_clk@1c20028 { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; @@ -161,23 +163,24 @@ clock-output-names = "pll6d2"; }; - /* dummy clock until pll6 can be reused */ - pll8: pll8_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1>; - clock-output-names = "pll8"; + pll7: pll7_clk@1c2002c { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c2002c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll7", "pll7x2"; }; - cpu: cpu_clk@01c20050 { + cpu: cpu_clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; reg = <0x01c20050 0x4>; clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; clock-output-names = "cpu"; + critical-clocks = <0>; }; - axi: axi_clk@01c20050 { + axi: axi_clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-axi-clk"; reg = <0x01c20050 0x4>; @@ -185,7 +188,7 @@ clock-output-names = "axi"; }; - ahb1: ahb1_clk@01c20054 { + ahb1: ahb1_clk@1c20054 { #clock-cells = <0>; compatible = "allwinner,sun6i-a31-ahb1-clk"; reg = <0x01c20054 0x4>; @@ -193,7 +196,7 @@ clock-output-names = "ahb1"; }; - ahb2: ahb2_clk@01c2005c { + ahb2: ahb2_clk@1c2005c { #clock-cells = <0>; compatible = "allwinner,sun8i-h3-ahb2-clk"; reg = <0x01c2005c 0x4>; @@ -201,7 +204,7 @@ clock-output-names = "ahb2"; }; - apb1: apb1_clk@01c20054 { + apb1: apb1_clk@1c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb0-clk"; reg = <0x01c20054 0x4>; @@ -209,7 +212,7 @@ clock-output-names = "apb1"; }; - apb2: apb2_clk@01c20058 { + apb2: apb2_clk@1c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; @@ -217,92 +220,95 @@ clock-output-names = "apb2"; }; - bus_gates: clk@01c20060 { + bus_gates: bus_gates_clk@1c20060 { #clock-cells = <1>; - compatible = "allwinner,a64-bus-gates-clk", - "allwinner,sun8i-h3-bus-gates-clk"; + compatible = "allwinner,sun50i-a64-bus-gates-clk", + "allwinner,sunxi-multi-bus-gates-clk"; reg = <0x01c20060 0x14>; - clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; - clock-names = "ahb1", "ahb2", "apb1", "apb2"; - clock-indices = <1>, - <5>, <6>, <8>, - <9>, <10>, <13>, - <14>, <17>, <18>, - <19>, <20>, - <21>, <23>, - <24>, <25>, - <28>, <29>, - <32>, <35>, - <36>, <37>, - <40>, <43>, - <44>, <52>, <53>, - <54>, <64>, - <65>, <69>, <72>, - <76>, <77>, <78>, - <96>, <97>, <98>, - <101>, - <112>, <113>, - <114>, <115>, - <116>, <135>; - clock-output-names = "bus_mipidsi", - "bus_ce", "bus_dma", "bus_mmc0", - "bus_mmc1", "bus_mmc2", "bus_nand", - "bus_sdram", "bus_gmac", "bus_ts", - "bus_hstimer", "bus_spi0", - "bus_spi1", "bus_otg", - "bus_otg_ehci0", "bus_ehci0", - "bus_otg_ohci0", "bus_ohci0", - "bus_ve", "bus_lcd0", - "bus_lcd1", "bus_deint", - "bus_csi", "bus_hdmi", - "bus_de", "bus_gpu", "bus_msgbox", - "bus_spinlock", "bus_codec", - "bus_spdif", "bus_pio", "bus_ths", - "bus_i2s0", "bus_i2s1", "bus_i2s2", - "bus_i2c0", "bus_i2c1", "bus_i2c2", - "bus_scr", - "bus_uart0", "bus_uart1", - "bus_uart2", "bus_uart3", - "bus_uart4", "bus_dbg"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; + ahb1_parent { + clocks = <&ahb1>; + clock-indices = <1>, <5>, + <6>, <8>, + <9>, <10>, + <13>, <14>, + <18>, <19>, + <20>, <21>, + <23>, <24>, + <25>, <28>, + <32>, <35>, + <36>, <37>, + <40>, <43>, + <44>, <52>, + <53>, <54>, + <135>; + clock-output-names = "bus_mipidsi", "bus_ce", + "bus_dma", "bus_mmc0", + "bus_mmc1", "bus_mmc2", + "bus_nand", "bus_sdram", + "bus_ts", "bus_hstimer", + "bus_spi0", "bus_spi1", + "bus_otg", "bus_otg_ehci0", + "bus_ehci0", "bus_otg_ohci0", + "bus_ve", "bus_lcd0", + "bus_lcd1", "bus_deint", + "bus_csi", "bus_hdmi", + "bus_de", "bus_gpu", + "bus_msgbox", "bus_spinlock", + "bus_dbg"; + }; + ahb2_parent { + clocks = <&ahb2>; + clock-indices = <17>, <29>; + clock-output-names = "bus_gmac", "bus_ohci0"; + }; + apb1_parent { + clocks = <&apb1>; + clock-indices = <64>, <65>, + <69>, <72>, + <76>, <77>, + <78>; + clock-output-names = "bus_codec", "bus_spdif", + "bus_pio", "bus_ths", + "bus_i2s0", "bus_i2s1", + "bus_i2s2"; + }; + abp2_parent { + clocks = <&apb2>; + clock-indices = <96>, <97>, + <98>, <101>, + <112>, <113>, + <114>, <115>, + <116>; + clock-output-names = "bus_i2c0", "bus_i2c1", + "bus_i2c2", "bus_scr", + "bus_uart0", "bus_uart1", + "bus_uart2", "bus_uart3", + "bus_uart4"; + }; }; - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; + mmc0_clk: mmc0_clk@1c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: mmc1_clk@1c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; + clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; + clock-output-names = "mmc1"; }; - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; + mmc2_clk: mmc2_clk@1c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - }; - - regulators { - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; + clock-output-names = "mmc2"; }; }; @@ -312,17 +318,14 @@ #size-cells = <1>; ranges; - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun50i-a64-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&bus_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&bus_gates 8>, <&mmc0_clk>, + <&mmc0_clk>, <&mmc0_clk>; + clock-names = "ahb", "mmc", + "output", "sample"; resets = <&ahb_rst 8>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; @@ -331,17 +334,14 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + mmc1: mmc@1c10000 { + compatible = "allwinner,sun50i-a64-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&bus_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&bus_gates 9>, <&mmc1_clk>, + <&mmc1_clk>, <&mmc1_clk>; + clock-names = "ahb", "mmc", + "output", "sample"; resets = <&ahb_rst 9>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; @@ -350,17 +350,14 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + mmc2: mmc@1c11000 { + compatible = "allwinner,sun50i-a64-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&bus_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&bus_gates 10>, <&mmc2_clk>, + <&mmc2_clk>, <&mmc2_clk>; + clock-names = "ahb", "mmc", + "output", "sample"; resets = <&ahb_rst 10>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; @@ -369,8 +366,8 @@ #size-cells = <0>; }; - pio: pinctrl@01c20800 { - compatible = "allwinner,a64-pinctrl"; + pio: pinctrl@1c20800 { + compatible = "allwinner,sun50i-a64-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, @@ -395,14 +392,28 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart1_pins: uart1@0 { + uart1_2pins: uart1_2@0 { + allwinner,pins = "PG6", "PG7"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart1_4pins: uart1_4@0 { allwinner,pins = "PG6", "PG7", "PG8", "PG9"; allwinner,function = "uart1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart2_pins: uart2@0 { + uart2_2pins: uart2_2@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "uart2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart2_4pins: uart2_4@0 { allwinner,pins = "PB0", "PB1", "PB2", "PB3"; allwinner,function = "uart2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -416,14 +427,28 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_b: uart3@1 { + uart3_2pins_b: uart3_2@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart3_4pins_b: uart3_4@1 { allwinner,pins = "PH4", "PH5", "PH6", "PH7"; allwinner,function = "uart3"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart4_pins: uart4@0 { + uart4_2pins: uart4_2@0 { + allwinner,pins = "PD2", "PD3"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart4_4pins: uart4_4@0 { allwinner,pins = "PD2", "PD3", "PD4", "PD5"; allwinner,function = "uart4"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -460,27 +485,48 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + i2c0_pins: i2c0_pins { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins: i2c1_pins { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins: i2c2_pins { + allwinner,pins = "PE14", "PE15"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; - ahb_rst: reset@01c202c0 { + ahb_rst: reset@1c202c0 { #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-reset"; + compatible = "allwinner,sun6i-a31-clock-reset"; reg = <0x01c202c0 0xc>; }; - apb1_rst: reset@01c202d0 { + apb1_rst: reset@1c202d0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; reg = <0x01c202d0 0x4>; }; - apb2_rst: reset@01c202d8 { + apb2_rst: reset@1c202d8 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; reg = <0x01c202d8 0x4>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; @@ -488,11 +534,10 @@ reg-io-width = <4>; clocks = <&bus_gates 112>; resets = <&apb2_rst 16>; - reset-names = "apb2"; status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; @@ -500,11 +545,10 @@ reg-io-width = <4>; clocks = <&bus_gates 113>; resets = <&apb2_rst 17>; - reset-names = "apb2"; status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -512,11 +556,10 @@ reg-io-width = <4>; clocks = <&bus_gates 114>; resets = <&apb2_rst 18>; - reset-names = "apb2"; status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; @@ -524,11 +567,10 @@ reg-io-width = <4>; clocks = <&bus_gates 115>; resets = <&apb2_rst 19>; - reset-names = "apb2"; status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; @@ -536,29 +578,47 @@ reg-io-width = <4>; clocks = <&bus_gates 116>; resets = <&apb2_rst 20>; - reset-names = "apb2"; status = "disabled"; }; - rtc: rtc@01f00000 { + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; - }; - gic: interrupt-controller@{ - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 96>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; - reg = <0x01C81000 0x1000>, - <0x01C82000 0x2000>, - <0x01C84000 0x2000>, - <0x01C86000 0x2000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 97>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@1c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 98>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h index ca9a4f99ad2..a0f33b05b51 100644 --- a/arch/arm/include/asm/arch-sunxi/spl.h +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -18,6 +18,10 @@ #define SPL_ADDR 0x0 #endif +/* The low 8-bits of the 'boot_media' field in the SPL header */ +#define SUNXI_BOOTED_FROM_MMC0 0 +#define SUNXI_BOOTED_FROM_SPI 3 + /* boot head definition from sun4i boot code */ struct boot_file_head { uint32_t b_instruction; /* one intruction jumping to real code */ @@ -45,7 +49,9 @@ struct boot_file_head { uint8_t spl_signature[4]; }; uint32_t fel_script_address; - uint32_t reserved; /* padding, align to 32 bytes */ + uint32_t reserved1[3]; + uint32_t boot_media; /* written here by the boot ROM */ + uint32_t reserved2[5]; /* padding, align to 64 bytes */ }; #define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0) diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index ad3d6c49185..25367cf3800 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o obj-$(CONFIG_AXP152_POWER) += pmic_bus.o obj-$(CONFIG_AXP209_POWER) += pmic_bus.o obj-$(CONFIG_AXP221_POWER) += pmic_bus.o +obj-$(CONFIG_AXP809_POWER) += pmic_bus.o obj-$(CONFIG_AXP818_POWER) += pmic_bus.o ifdef CONFIG_SPL_BUILD diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 20149dabc8e..bd15b9bfb05 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -247,6 +247,15 @@ u32 spl_boot_device(void) return -1; /* Never reached */ } +/* + * Properly announce BOOT_DEVICE_BOARD as "FEL". + * Overrides weak function from common/spl/spl.c + */ +void spl_board_announce_boot_device(void) +{ + printf("FEL"); +} + /* No confirmation data available in SPL yet. Hardcode bootmode */ u32 spl_boot_mode(void) { diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c index 5b81a8d8e12..7c57f02792b 100644 --- a/arch/arm/mach-sunxi/pmic_bus.c +++ b/arch/arm/mach-sunxi/pmic_bus.c @@ -36,7 +36,7 @@ int pmic_bus_init(void) if (!needs_init) return 0; -#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER +#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER # ifdef CONFIG_MACH_SUN6I p2wi_init(); ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR, @@ -62,7 +62,7 @@ int pmic_bus_read(u8 reg, u8 *data) return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1); #elif defined CONFIG_AXP209_POWER return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1); -#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER +#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER # ifdef CONFIG_MACH_SUN6I return p2wi_read(reg, data); # else @@ -77,7 +77,7 @@ int pmic_bus_write(u8 reg, u8 data) return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1); #elif defined CONFIG_AXP209_POWER return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1); -#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER +#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER # ifdef CONFIG_MACH_SUN6I return p2wi_write(reg, data); # else diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index fa7872031b9..c1ae6f5d9eb 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -18,7 +18,6 @@ config SUNXI_GEN_SUN6I choice prompt "Sunxi SoC Variant" - optional config MACH_SUN4I bool "sun4i (Allwinner A10)" @@ -68,6 +67,12 @@ config MACH_SUN8I_A33 select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT +config MACH_SUN8I_A83T + bool "sun8i (Allwinner A83T)" + select CPU_V7 + select SUNXI_GEN_SUN6I + select SUPPORT_SPL + config MACH_SUN8I_H3 bool "sun8i (Allwinner H3)" select CPU_V7 @@ -77,22 +82,16 @@ config MACH_SUN8I_H3 select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT -config MACH_SUN50I - bool "sun50i (Allwinner A64)" - select ARM64 - select SUNXI_GEN_SUN6I - -config MACH_SUN8I_A83T - bool "sun8i (Allwinner A83T)" - select CPU_V7 - select SUNXI_GEN_SUN6I - select SUPPORT_SPL - config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 select SUNXI_GEN_SUN6I +config MACH_SUN50I + bool "sun50i (Allwinner A64)" + select ARM64 + select SUNXI_GEN_SUN6I + endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" @@ -261,6 +260,7 @@ config MMC config MMC0_CD_PIN string "Card detect pin for mmc0" + default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I default "" ---help--- Set the card detect pin for mmc0, leave empty to not use cd. This @@ -368,6 +368,7 @@ config I2C0_ENABLE bool "Enable I2C/TWI controller 0" default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default n if MACH_SUN6I || MACH_SUN8I + select CMD_I2C ---help--- This allows enabling I2C/TWI controller 0 by muxing its pins, enabling its clock and setting up the bus. This is especially useful on devices @@ -377,12 +378,14 @@ config I2C0_ENABLE config I2C1_ENABLE bool "Enable I2C/TWI controller 1" default n + select CMD_I2C ---help--- See I2C0_ENABLE help text. config I2C2_ENABLE bool "Enable I2C/TWI controller 2" default n + select CMD_I2C ---help--- See I2C0_ENABLE help text. @@ -390,6 +393,7 @@ if MACH_SUN6I || MACH_SUN7I config I2C3_ENABLE bool "Enable I2C/TWI controller 3" default n + select CMD_I2C ---help--- See I2C0_ENABLE help text. endif @@ -399,6 +403,7 @@ config R_I2C_ENABLE bool "Enable the PRCM I2C/TWI controller" # This is used for the pmic on H3 default y if SY8106A_POWER + select CMD_I2C ---help--- Set this to y to enable the I2C controller which is part of the PRCM. endif @@ -407,6 +412,7 @@ if MACH_SUN7I config I2C4_ENABLE bool "Enable I2C/TWI controller 4" default n + select CMD_I2C ---help--- See I2C0_ENABLE help text. endif @@ -419,7 +425,7 @@ config AXP_GPIO config VIDEO boolean "Enable graphical uboot console on HDMI, LCD or VGA" - depends on !MACH_SUN8I_A83T + depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I_A64 default y ---help--- Say Y here to add support for using a cfb console on the HDMI, LCD @@ -535,6 +541,7 @@ config VIDEO_LCD_PANEL_I2C bool "LCD panel needs to be configured via i2c" depends on VIDEO default n + select CMD_I2C ---help--- Say y here if the LCD panel needs to be configured via i2c. This will add a bitbang i2c controller using gpios to talk to the LCD. diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 3cf36147b24..d09cf6dfb59 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -133,15 +133,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_MACH_SUN50I -void dram_init_banksize(void) -{ - /* We need to reserve the first 16MB of RAM for ATF */ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE + (16 * 1024 * 1024); - gd->bd->bi_dram[0].size = get_effective_memsize() - (16 * 1024 * 1024); -} -#endif - #if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_SPL_BUILD) static void nand_pinmux_setup(void) { @@ -483,10 +474,12 @@ void sunxi_board_init(void) #endif #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ - defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER + defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \ + defined CONFIG_AXP818_POWER power_failed = axp_init(); -#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER +#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \ + defined CONFIG_AXP818_POWER power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT); #endif power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); @@ -494,11 +487,13 @@ void sunxi_board_init(void) #if !defined(CONFIG_AXP209_POWER) && !defined(CONFIG_AXP818_POWER) power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT); #endif -#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER +#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \ + defined CONFIG_AXP818_POWER power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT); #endif -#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER +#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \ + defined CONFIG_AXP818_POWER power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT); #endif power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT); @@ -509,11 +504,14 @@ void sunxi_board_init(void) power_failed |= axp_set_aldo4(CONFIG_AXP_ALDO4_VOLT); #endif -#if defined(CONFIG_AXP221_POWER) || defined(CONFIG_AXP818_POWER) +#if defined(CONFIG_AXP221_POWER) || defined(CONFIG_AXP809_POWER) || \ + defined(CONFIG_AXP818_POWER) power_failed |= axp_set_dldo(1, CONFIG_AXP_DLDO1_VOLT); power_failed |= axp_set_dldo(2, CONFIG_AXP_DLDO2_VOLT); +#if !defined CONFIG_AXP809_POWER power_failed |= axp_set_dldo(3, CONFIG_AXP_DLDO3_VOLT); power_failed |= axp_set_dldo(4, CONFIG_AXP_DLDO4_VOLT); +#endif power_failed |= axp_set_eldo(1, CONFIG_AXP_ELDO1_VOLT); power_failed |= axp_set_eldo(2, CONFIG_AXP_ELDO2_VOLT); power_failed |= axp_set_eldo(3, CONFIG_AXP_ELDO3_VOLT); @@ -524,6 +522,10 @@ void sunxi_board_init(void) power_failed |= axp_set_fldo(2, CONFIG_AXP_FLDO2_VOLT); power_failed |= axp_set_fldo(3, CONFIG_AXP_FLDO3_VOLT); #endif + +#if defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER + power_failed |= axp_set_sw(IS_ENABLED(CONFIG_AXP_SW_ON)); +#endif #endif printf("DRAM:"); ramsize = sunxi_dram_init(); diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index d7725e4e54d..8cb7ac7bb11 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -9,20 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_USB_EHCI_HCD=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index c39daf167f3..6a0d81530c6 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -10,19 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 955b6cf00ab..a790856e005 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -14,19 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_SUNXI_NO_PMIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 30ea836f399..d12a3cc7569 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -16,22 +16,11 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 546c84c9308..cc5858ec68f 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -9,20 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO3_VOLT=2800 diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 5dc4ba3fd79..7b0309c8cd5 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -7,20 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index e952562205c..e4168fa3e30 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -10,19 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y +CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO4_VOLT=2800 diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index cecf4c20c51..6430606f474 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -12,20 +12,11 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y +CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO4_VOLT=2800 diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 7479f7f7dd2..fc1be7d8194 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -14,18 +14,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index fde84acd149..8262be54052 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -16,18 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig index 45539c1ea1d..44f3982f64e 100644 --- a/configs/Auxtek-T003_defconfig +++ b/configs/Auxtek-T003_defconfig @@ -8,19 +8,8 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 52dfdf25f07..9d5365dce6a 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -6,19 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index fd6b8de357c..d9b1bd6ca43 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -8,20 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index ae385835fb0..496c20edd3e 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -10,20 +10,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO4_VOLT=2500 diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig index cbbec4706cd..3e8c0a11881 100644 --- a/configs/CHIP_defconfig +++ b/configs/CHIP_defconfig @@ -8,19 +8,9 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_I2C=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 CONFIG_USB_MUSB_GADGET=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index ab6f329bedd..1cb010d7d52 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -8,19 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 080bfbd36db..3257aaea789 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -14,20 +14,9 @@ CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 6380a22a999..2ce8cb1996f 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -18,20 +18,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 683f7f97308..4b9d722bccc 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -7,19 +7,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index f8c7107563d..c88411585f9 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -7,18 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 0d43c53d9db..4e25392a3b3 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -12,22 +12,11 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig index b5959eea477..725652d6a73 100644 --- a/configs/Cubietruck_plus_defconfig +++ b/configs/Cubietruck_plus_defconfig @@ -15,20 +15,9 @@ CONFIG_AXP_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO3_VOLT=2500 CONFIG_AXP_DLDO4_VOLT=3300 CONFIG_AXP_FLDO1_VOLT=1200 diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig index 7cc162b3761..5f0176083da 100644 --- a/configs/Empire_electronix_d709_defconfig +++ b/configs/Empire_electronix_d709_defconfig @@ -17,18 +17,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index f424557fcc4..02bcdbf56af 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -10,19 +10,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 4ff0a6bc5cd..fef3685f2e7 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -15,18 +15,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index f4832a78304..cb6dfe4d100 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -7,19 +7,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index 122799425b0..d2111c6b417 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -8,19 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index 3b0d8cfa1eb..378abce94b2 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -9,19 +9,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 28768ec519e..c3f0421e915 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -7,19 +7,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 11bb7091fc4..9d8d3251e1b 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -7,18 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index ca61e5c3ea1..49bb26a098d 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -5,18 +5,7 @@ CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index a9d5aae5a73..555944479b9 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -10,17 +10,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 14db5ae02c6..3d71bf50a7e 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -13,19 +13,9 @@ CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index cb9ca3baf8b..cef97946f95 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -5,19 +5,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_SUNXI_NO_PMIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index bae638fd493..b3f825e33f2 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -8,19 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 931179909b8..f076e30b557 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -7,18 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index 831578ee5e5..eccf372caa3 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -8,19 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index d628c7c293b..d72dcc0311a 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -10,19 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index 35df2258f29..0d1ba151e2c 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -9,19 +9,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index 8a4980e1c8f..f0b4384239a 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -8,19 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index 842db29e55b..53e023a75fd 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -8,16 +8,6 @@ CONFIG_MMC0_CD_PIN="PH18" # CONFIG_VIDEO is not set CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 102b96c0712..53f9bfe9cb6 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -6,19 +6,8 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index 212f98cfa7a..00c671b12cb 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -11,19 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 148b4fa5473..a8652554e42 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -13,19 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig index 4136841a2cd..ae1f1e83aae 100644 --- a/configs/Sinlinx_SinA31s_defconfig +++ b/configs/Sinlinx_SinA31s_defconfig @@ -12,19 +12,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index 03cef97c069..013c35e1a83 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -6,16 +6,6 @@ CONFIG_DRAM_ZQ=15291 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig index dc781dbd12e..181e1e29da0 100644 --- a/configs/Sinovoip_BPI_M2_defconfig +++ b/configs/Sinovoip_BPI_M2_defconfig @@ -8,19 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_ALDO2_VOLT=1800 diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig index 13dbb98689e..77b0525e110 100644 --- a/configs/Sinovoip_BPI_M3_defconfig +++ b/configs/Sinovoip_BPI_M3_defconfig @@ -15,20 +15,11 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPD(25)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DCDC5_VOLT=1200 CONFIG_AXP_DLDO3_VOLT=2500 +CONFIG_AXP_SW_ON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index 948107c8298..d36a5dccd05 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -20,19 +20,8 @@ CONFIG_VIDEO_LCD_TL059WV5C0=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB_MUSB_HOST=y diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index d754ccdf3fa..5f3d624292a 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -13,19 +13,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index 4a7dbdbdac6..bfc8cba7d39 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -12,19 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index 0b40b83843c..fc43cc5fb1e 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -7,18 +7,7 @@ CONFIG_USB1_VBUS_PIN="PG12" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index fab74f4cc27..65c1d8e28a2 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -19,18 +19,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig index 71f01dbb218..958104e7500 100644 --- a/configs/Yones_Toptech_BS1078_V2_defconfig +++ b/configs/Yones_Toptech_BS1078_V2_defconfig @@ -16,18 +16,8 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-yones-toptech-bs1078-v2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index b61b15cb578..1cfb380ce86 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -10,19 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig index 655a0e7353d..ae67c375b5b 100644 --- a/configs/colorfly_e708_q1_defconfig +++ b/configs/colorfly_e708_q1_defconfig @@ -16,19 +16,9 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-colorfly-e708-q1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO2_VOLT=1800 CONFIG_USB_MUSB_HOST=y diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig index 2b6dba8a226..c76af0ec011 100644 --- a/configs/difrnce_dit4350_defconfig +++ b/configs/difrnce_dit4350_defconfig @@ -16,18 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-difrnce-dit4350" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index b0791b90086..f8155b2176b 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -14,18 +14,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 03cdb1787c3..34e74af9f69 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -18,19 +18,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index c11aed8bd4c..a14de0d0bf7 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -17,18 +17,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-gt90h-v4" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig index 7c731b30cca..e04d96bee82 100644 --- a/configs/h8_homlet_v2_defconfig +++ b/configs/h8_homlet_v2_defconfig @@ -11,19 +11,9 @@ CONFIG_AXP_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO4_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 266015a6172..54fa8190e6b 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -7,19 +7,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,MACPWR=SUNXI_GPH(21)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index e9ec810ef81..7ec54a738ed 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -14,18 +14,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index 64da00f4611..5e68769fcd5 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -14,18 +14,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index 8b64678b97e..3dea793b912 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -13,18 +13,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig index d432ff0c9a9..548a07e7330 100644 --- a/configs/icnova-a20-swac_defconfig +++ b/configs/icnova-a20-swac_defconfig @@ -14,19 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,CMD_BMP,CMD_UNZIP" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index b0f244decee..a8b32cb3e62 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -14,19 +14,8 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index a95379557f4..0b03e163c3a 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -13,18 +13,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet97fv2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index dace876a1ed..27b50192376 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -16,18 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-98v-rev2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig index 35d9d7c574c..153450ffc2d 100644 --- a/configs/inet9f_rev03_defconfig +++ b/configs/inet9f_rev03_defconfig @@ -13,18 +13,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 79f3cfbf82a..9cb8b1da846 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -8,19 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,MACPWR=SUNXI_GPH(19)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 9a4446637da..ce81309b0f1 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -9,19 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index 5e545d083cb..720aefad309 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -7,19 +7,8 @@ CONFIG_USB1_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index a76a699044a..d38bc7fdcfe 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -6,19 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_SUNXI_NO_PMIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index bdfb59756d0..de1b73f2c81 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -4,18 +4,7 @@ CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig index f33ac36fb3d..8b1082cd3e3 100644 --- a/configs/orangepi_2_defconfig +++ b/configs/orangepi_2_defconfig @@ -10,19 +10,8 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig index de6e9c8ddb7..be8afcab367 100644 --- a/configs/orangepi_one_defconfig +++ b/configs/orangepi_one_defconfig @@ -9,17 +9,7 @@ CONFIG_MMC0_CD_PIN="PF6" CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig index 7bade8faabe..7eaa795b32e 100644 --- a/configs/orangepi_pc_defconfig +++ b/configs/orangepi_pc_defconfig @@ -8,19 +8,8 @@ CONFIG_DRAM_ODT_EN=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index 2df58598918..9ff433286f3 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -12,19 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPG(11)" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index 0494a9f1ccb..489b75c3bfa 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -4,17 +4,8 @@ CONFIG_MACH_SUN50I=y CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881915 # CONFIG_VIDEO is not set -CONFIG_DEFAULT_DEVICE_TREE="pine64_plus" +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig index cedbf531534..04c99b9e6ba 100644 --- a/configs/polaroid_mid2809pxe04_defconfig +++ b/configs/polaroid_mid2809pxe04_defconfig @@ -17,18 +17,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-polaroid-mid2809pxe04" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig index aad9619c1c6..9aa52800a54 100644 --- a/configs/pov_protab2_ips9_defconfig +++ b/configs/pov_protab2_ips9_defconfig @@ -14,18 +14,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pov-protab2-ips9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig index 97232cede32..b467b62f9b2 100644 --- a/configs/q8_a13_tablet_defconfig +++ b/configs/q8_a13_tablet_defconfig @@ -16,18 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index 79dcc33f366..73914641a49 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -17,18 +17,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-q8-tablet" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index ff29e81c5fb..16f8600c223 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -17,18 +17,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index d87700c8d6a..63789188836 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -17,18 +17,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 4e1c39345e2..9d9d4bffed0 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -6,19 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_AXP152_POWER=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index 3677da7e5af..6d39dec371b 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -11,18 +11,7 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y CONFIG_USB_EHCI_HCD=y diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 3c41bca32ac..3c441678059 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -41,9 +41,17 @@ config AXP221_POWER Select this to enable support for the axp221/axp223 pmic found on most A23 and A31 boards. +config AXP809_POWER + boolean "axp809 pmic support" + depends on MACH_SUN9I + select CMD_POWEROFF + ---help--- + Say y here to enable support for the axp809 pmic found on A80 boards. + config AXP818_POWER boolean "axp818 pmic support" depends on MACH_SUN8I_A83T + select CMD_POWEROFF ---help--- Say y here to enable support for the axp818 pmic found on A83T dev board. @@ -59,36 +67,39 @@ endchoice config AXP_DCDC1_VOLT int "axp pmic dcdc1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 3300 if AXP818_POWER - default 3000 if MACH_SUN6I || MACH_SUN8I + default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for generic 3.3V IO voltage for external devices like the lcd-panal and sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to - safe battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T - dcdc1 is used for VCC-IO, nand, usb0, sd , etc. + save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T + dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally + powers some of the pingroups, NAND/eMMC, SD/MMC, and USB OTG. config AXP_DCDC2_VOLT int "axp pmic dcdc2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER default 900 if AXP818_POWER default 1400 if AXP152_POWER || AXP209_POWER default 1200 if MACH_SUN6I default 1100 if MACH_SUN8I + default 0 if MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to disable dcdc2. On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V. On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V. On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V. + On A80 boards dcdc2 powers the GPU and can be left off. On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V. config AXP_DCDC3_VOLT int "axp pmic dcdc3 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER - default 900 if AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER + default 900 if AXP809_POWER || AXP818_POWER default 1500 if AXP152_POWER default 1250 if AXP209_POWER default 1200 if MACH_SUN6I || MACH_SUN8I @@ -99,51 +110,55 @@ config AXP_DCDC3_VOLT should be 1.25V. On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V. On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V. + On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V. On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V. config AXP_DCDC4_VOLT int "axp pmic dcdc4 voltage" - depends on AXP152_POWER || AXP221_POWER || AXP818_POWER + depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER default 1250 if AXP152_POWER default 1200 if MACH_SUN6I default 0 if MACH_SUN8I + default 900 if MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to disable dcdc4. On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V. On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V. On A23 / A33 boards dcdc4 is unused and should be disabled. + On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V. On A83T boards dcdc4 is used for VDD-GPU. config AXP_DCDC5_VOLT int "axp pmic dcdc5 voltage" - depends on AXP221_POWER || AXP818_POWER - default 1500 if MACH_SUN6I || MACH_SUN8I + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER + default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to disable dcdc5. - On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V, - 1.35V if DDR3L is used. + On A23 / A31 / A33 / A80 / A83T boards dcdc5 is VCC-DRAM and + should be 1.5V, 1.35V if DDR3L is used. config AXP_ALDO1_VOLT int "axp pmic (a)ldo1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 if MACH_SUN6I default 1800 if MACH_SUN8I_A83T - default 3000 if MACH_SUN8I + default 3000 if MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to disable aldo1. On A31 boards aldo1 is often used to power the wifi module. On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V. + On A80 boards aldo1 powers the USB hosts and should be 3.0V. On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and should be 1.8V. config AXP_ALDO2_VOLT int "axp pmic (a)ldo2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER default 3000 if AXP152_POWER || AXP209_POWER - default 0 if MACH_SUN6I + default 0 if MACH_SUN6I || MACH_SUN9I default 1800 if MACH_SUN8I_A83T default 2500 if MACH_SUN8I ---help--- @@ -153,19 +168,21 @@ config AXP_ALDO2_VOLT On A31 boards aldo2 is typically unused and should be disabled. On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V. On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V. + On A80 boards aldo2 powers PB pingroup and camera IO and can be left off. On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC, LPDDR2, and the codec. It should be 1.8V. config AXP_ALDO3_VOLT int "axp pmic (a)ldo3 voltage" - depends on AXP209_POWER || AXP221_POWER || AXP818_POWER - default 0 if AXP209_POWER + depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER + default 0 if AXP209_POWER || MACH_SUN9I default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to disable aldo3. On A10(s) / A13 / A20 boards aldo3 should be 2.8V. On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V. + On A80 boards aldo3 is normally not used. On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be 3.0V. @@ -180,21 +197,23 @@ config AXP_ALDO4_VOLT config AXP_DLDO1_VOLT int "axp pmic dldo1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used - to power the ethernet phy. On sun8i (A23) boards this is often used to - power the wifi. + to power the ethernet phy. On A23, A33 and A80 boards this is often + used to power the wifi. config AXP_DLDO2_VOLT int "axp pmic dldo2 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER + default 3000 if MACH_SUN9I default 0 ---help--- Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to disable dldo2. + On A80 boards dldo2 normally powers the PL pins and should be 3.0V. config AXP_DLDO3_VOLT int "axp pmic dldo3 voltage" @@ -214,7 +233,7 @@ config AXP_DLDO4_VOLT config AXP_ELDO1_VOLT int "axp pmic eldo1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to @@ -222,7 +241,7 @@ config AXP_ELDO1_VOLT config AXP_ELDO2_VOLT int "axp pmic eldo2 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to @@ -230,13 +249,15 @@ config AXP_ELDO2_VOLT config AXP_ELDO3_VOLT int "axp pmic eldo3 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER + default 3000 if MACH_SUN9I default 0 ---help--- Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to disable eldo3. On some A31(s) tablets it might be used to supply 1.2V for the SSD2828 chip (converter of parallel LCD interface into MIPI DSI). + On A80 boards it powers the PM pingroup and should be 3.0V. config AXP_FLDO1_VOLT int "axp pmic fldo1 voltage" @@ -249,7 +270,7 @@ config AXP_FLDO1_VOLT used. config AXP_FLDO2_VOLT - int "axp pmic eldo2 voltage" + int "axp pmic fldo2 voltage" depends on AXP818_POWER default 900 if MACH_SUN8I_A83T ---help--- @@ -265,6 +286,13 @@ config AXP_FLDO3_VOLT Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to disable fldo3. +config AXP_SW_ON + bool "axp pmic sw on" + depends on AXP809_POWER || AXP818_POWER + default n + ---help--- + Enable to turn on axp pmic sw. + config SY8106A_VOUT1_VOLT int "SY8106A pmic VOUT1 voltage" depends on SY8106A_POWER diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 690faa0f5e4..b43523e6282 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_AS3722_POWER) += as3722.o obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP221_POWER) += axp221.o +obj-$(CONFIG_AXP809_POWER) += axp809.o obj-$(CONFIG_AXP818_POWER) += axp818.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c index cb1f88b185c..727ab098068 100644 --- a/drivers/power/axp221.c +++ b/drivers/power/axp221.c @@ -191,33 +191,20 @@ int axp_set_eldo(int eldo_num, unsigned int mvolt) { int ret; u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); - u8 addr, bits; - - switch (eldo_num) { - case 3: - addr = AXP221_ELDO3_CTRL; - bits = AXP221_OUTPUT_CTRL2_ELDO3_EN; - break; - case 2: - addr = AXP221_ELDO2_CTRL; - bits = AXP221_OUTPUT_CTRL2_ELDO2_EN; - break; - case 1: - addr = AXP221_ELDO1_CTRL; - bits = AXP221_OUTPUT_CTRL2_ELDO1_EN; - break; - default: + + if (eldo_num < 1 || eldo_num > 3) return -EINVAL; - } if (mvolt == 0) - return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2, bits); + return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); - ret = pmic_bus_write(addr, cfg); + ret = pmic_bus_write(AXP221_ELDO1_CTRL + (eldo_num - 1), cfg); if (ret) return ret; - return pmic_bus_setbits(AXP221_OUTPUT_CTRL2, bits); + return pmic_bus_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); } int axp_init(void) diff --git a/drivers/power/axp809.c b/drivers/power/axp809.c new file mode 100644 index 00000000000..c8b76cf9b7f --- /dev/null +++ b/drivers/power/axp809.c @@ -0,0 +1,238 @@ +/* + * AXP809 driver based on AXP221 driver + * + * + * (C) Copyright 2016 Chen-Yu Tsai <wens@csie.org> + * + * Based on axp221.c + * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pmic_bus.h> +#include <axp_pmic.h> + +static u8 axp809_mvolt_to_cfg(int mvolt, int min, int max, int div) +{ + if (mvolt < min) + mvolt = min; + else if (mvolt > max) + mvolt = max; + + return (mvolt - min) / div; +} + +int axp_set_dcdc1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 1600, 3400, 100); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC1_EN); + + ret = pmic_bus_write(AXP809_DCDC1_CTRL, cfg); + if (ret) + return ret; + + ret = pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_DC1SW_EN); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC1_EN); +} + +int axp_set_dcdc2(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 600, 1540, 20); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC2_EN); + + ret = pmic_bus_write(AXP809_DCDC2_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC2_EN); +} + +int axp_set_dcdc3(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 600, 1860, 20); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC3_EN); + + ret = pmic_bus_write(AXP809_DCDC3_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC3_EN); +} + +int axp_set_dcdc4(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 600, 1540, 20); + + if (mvolt >= 1540) + cfg = 0x30 + axp809_mvolt_to_cfg(mvolt, 1800, 2600, 100); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC4_EN); + + ret = pmic_bus_write(AXP809_DCDC5_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC4_EN); +} + +int axp_set_dcdc5(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 1000, 2550, 50); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC5_EN); + + ret = pmic_bus_write(AXP809_DCDC5_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC5_EN); +} + +int axp_set_aldo(int aldo_num, unsigned int mvolt) +{ + int ret; + u8 cfg; + + if (aldo_num < 1 || aldo_num > 3) + return -EINVAL; + + if (mvolt == 0 && aldo_num == 3) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ALDO3_EN); + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); + + cfg = axp809_mvolt_to_cfg(mvolt, 700, 3300, 100); + ret = pmic_bus_write(AXP809_ALDO1_CTRL + (aldo_num - 1), cfg); + if (ret) + return ret; + + if (aldo_num == 3) + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ALDO3_EN); + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); +} + +/* TODO: re-work other AXP drivers to consolidate ALDO functions. */ +int axp_set_aldo1(unsigned int mvolt) +{ + return axp_set_aldo(1, mvolt); +} + +int axp_set_aldo2(unsigned int mvolt) +{ + return axp_set_aldo(2, mvolt); +} + +int axp_set_aldo3(unsigned int mvolt) +{ + return axp_set_aldo(3, mvolt); +} + +int axp_set_dldo(int dldo_num, unsigned int mvolt) +{ + u8 cfg = axp809_mvolt_to_cfg(mvolt, 700, 3300, 100); + int ret; + + if (dldo_num < 1 || dldo_num > 2) + return -EINVAL; + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1)); + + if (dldo_num == 1 && mvolt > 3300) + cfg += 1 + axp809_mvolt_to_cfg(mvolt, 3400, 4200, 200); + ret = pmic_bus_write(AXP809_DLDO1_CTRL + (dldo_num - 1), cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1)); +} + +int axp_set_eldo(int eldo_num, unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 700, 3300, 100); + + if (eldo_num < 1 || eldo_num > 3) + return -EINVAL; + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); + + ret = pmic_bus_write(AXP809_ELDO1_CTRL + (eldo_num - 1), cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); +} + +int axp_set_sw(bool on) +{ + if (on) + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_SWOUT_EN); + + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_SWOUT_EN); +} + +int axp_init(void) +{ + int ret; + + ret = pmic_bus_init(); + if (ret) + return ret; + + return 0; +} + +int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + pmic_bus_write(AXP809_SHUTDOWN, AXP809_SHUTDOWN_POWEROFF); + + /* infinite loop during shutdown */ + while (1) {} + + /* not reached */ + return 0; +} diff --git a/drivers/power/axp818.c b/drivers/power/axp818.c index 3ac05ffefe0..af4d7a69032 100644 --- a/drivers/power/axp818.c +++ b/drivers/power/axp818.c @@ -225,6 +225,16 @@ int axp_set_fldo(int fldo_num, unsigned int mvolt) AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1)); } +int axp_set_sw(bool on) +{ + if (on) + return pmic_bus_setbits(AXP818_OUTPUT_CTRL2, + AXP818_OUTPUT_CTRL2_SW_EN); + + return pmic_bus_clrbits(AXP818_OUTPUT_CTRL2, + AXP818_OUTPUT_CTRL2_SW_EN); +} + int axp_init(void) { u8 axp_chip_id; @@ -245,3 +255,14 @@ int axp_init(void) return 0; } + +int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + pmic_bus_write(AXP818_SHUTDOWN, AXP818_SHUTDOWN_POWEROFF); + + /* infinite loop during shutdown */ + while (1) {} + + /* not reached */ + return 0; +} diff --git a/include/axp809.h b/include/axp809.h new file mode 100644 index 00000000000..d27fb978d20 --- /dev/null +++ b/include/axp809.h @@ -0,0 +1,60 @@ +/* + * (C) Copyright 2016 Chen-Yu Tsai <wens@csie.org> + * + * X-Powers AXP809 Power Management IC driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define AXP809_CHIP_ID 0x03 + +#define AXP809_OUTPUT_CTRL1 0x10 +#define AXP809_OUTPUT_CTRL1_DC5LDO_EN (1 << 0) +#define AXP809_OUTPUT_CTRL1_DCDC1_EN (1 << 1) +#define AXP809_OUTPUT_CTRL1_DCDC2_EN (1 << 2) +#define AXP809_OUTPUT_CTRL1_DCDC3_EN (1 << 3) +#define AXP809_OUTPUT_CTRL1_DCDC4_EN (1 << 4) +#define AXP809_OUTPUT_CTRL1_DCDC5_EN (1 << 5) +#define AXP809_OUTPUT_CTRL1_ALDO1_EN (1 << 6) +#define AXP809_OUTPUT_CTRL1_ALDO2_EN (1 << 7) +#define AXP809_OUTPUT_CTRL2 0x12 +#define AXP809_OUTPUT_CTRL2_ELDO1_EN (1 << 0) +#define AXP809_OUTPUT_CTRL2_ELDO2_EN (1 << 1) +#define AXP809_OUTPUT_CTRL2_ELDO3_EN (1 << 2) +#define AXP809_OUTPUT_CTRL2_DLDO1_EN (1 << 3) +#define AXP809_OUTPUT_CTRL2_DLDO2_EN (1 << 4) +#define AXP809_OUTPUT_CTRL2_ALDO3_EN (1 << 5) +#define AXP809_OUTPUT_CTRL2_SWOUT_EN (1 << 6) +#define AXP809_OUTPUT_CTRL2_DC1SW_EN (1 << 7) + +#define AXP809_DLDO1_CTRL 0x15 +#define AXP809_DLDO2_CTRL 0x16 +#define AXP809_ELDO1_CTRL 0x19 +#define AXP809_ELDO2_CTRL 0x1a +#define AXP809_ELDO3_CTRL 0x1b +#define AXP809_DC5LDO_CTRL 0x1c +#define AXP809_DCDC1_CTRL 0x21 +#define AXP809_DCDC2_CTRL 0x22 +#define AXP809_DCDC3_CTRL 0x23 +#define AXP809_DCDC4_CTRL 0x24 +#define AXP809_DCDC5_CTRL 0x25 +#define AXP809_ALDO1_CTRL 0x28 +#define AXP809_ALDO2_CTRL 0x29 +#define AXP809_ALDO3_CTRL 0x2a +#define AXP809_SHUTDOWN 0x32 +#define AXP809_SHUTDOWN_POWEROFF (1 << 7) + +/* For axp_gpio.c */ +#define AXP_POWER_STATUS 0x00 +#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_VBUS_IPSOUT 0x30 +#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2) +#define AXP_MISC_CTRL 0x8f +#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4) +#define AXP_GPIO0_CTRL 0x90 +#define AXP_GPIO1_CTRL 0x92 +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_STATE 0x94 +#define AXP_GPIO_STATE_OFFSET 0 diff --git a/include/axp818.h b/include/axp818.h index 5630eed04d8..959774c76fa 100644 --- a/include/axp818.h +++ b/include/axp818.h @@ -24,6 +24,7 @@ #define AXP818_OUTPUT_CTRL2_DLDO2_EN (1 << 4) #define AXP818_OUTPUT_CTRL2_DLDO3_EN (1 << 5) #define AXP818_OUTPUT_CTRL2_DLDO4_EN (1 << 6) +#define AXP818_OUTPUT_CTRL2_SW_EN (1 << 7) #define AXP818_OUTPUT_CTRL3 0x13 #define AXP818_OUTPUT_CTRL3_FLDO1_EN (1 << 2) #define AXP818_OUTPUT_CTRL3_FLDO2_EN (1 << 3) @@ -54,6 +55,9 @@ #define AXP818_ALDO2_CTRL 0x29 #define AXP818_ALDO3_CTRL 0x2a +#define AXP818_SHUTDOWN 0x32 +#define AXP818_SHUTDOWN_POWEROFF (1 << 7) + /* For axp_gpio.c */ #define AXP_POWER_STATUS 0x00 #define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) diff --git a/include/axp_pmic.h b/include/axp_pmic.h index b203cc88ddb..d789ad80862 100644 --- a/include/axp_pmic.h +++ b/include/axp_pmic.h @@ -16,6 +16,9 @@ #ifdef CONFIG_AXP221_POWER #include <axp221.h> #endif +#ifdef CONFIG_AXP809_POWER +#include <axp809.h> +#endif #ifdef CONFIG_AXP818_POWER #include <axp818.h> #endif @@ -32,6 +35,7 @@ int axp_set_aldo4(unsigned int mvolt); int axp_set_dldo(int dldo_num, unsigned int mvolt); int axp_set_eldo(int eldo_num, unsigned int mvolt); int axp_set_fldo(int fldo_num, unsigned int mvolt); +int axp_set_sw(bool on); int axp_init(void); int axp_get_sid(unsigned int *sid); diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index ac2d93114b5..b33cfb86f82 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -189,14 +189,14 @@ #define CONFIG_SPL_BOARD_LOAD_IMAGE #if defined(CONFIG_MACH_SUN9I) -#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* ? KiB on sun9i */ +#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* ? KiB on sun9i */ #elif defined(CONFIG_MACH_SUN50I) -#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x7fe0 /* 32 KiB on sun50i */ +#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun50i */ #else -#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ +#define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ #endif #define CONFIG_SPL_LIBDISK_SUPPORT @@ -390,6 +390,23 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PRE_CONSOLE_BUFFER #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ +#ifdef CONFIG_ARM64 +/* + * Boards seem to come with at least 512MB of DRAM. + * The kernel should go at 512K, which is the default text offset (that will + * be adjusted at runtime if needed). + * There is no compression for arm64 kernels (yet), so leave some space + * for really big kernels, say 256MB for now. + * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. + * Align the initrd to a 2MB page. + */ +#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) +#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) +#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) +#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) + +#else /* * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, @@ -401,6 +418,7 @@ extern int soft_i2c_gpio_scl; #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) +#endif #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0xa000000\0" \ |