ARM: AM43xx: GP_EVM: Add support for DDR3

GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH).
Adding details for the same.
Below is the brief description of DDR3 init sequence(SW leveling):
-> Enable VTT regulator
-> Configure VTP
-> Configure DDR IO settings
-> Disable initialization and refreshes until EMIF registers are programmed.
-> Program Timing registers
-> Program leveling registers
-> Program PHY control and Temp alert and ZQ config registers.
-> Enable initialization and refreshes and configure SDRAM CONFIG register

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

7 files changed, 136 insertions, 19 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index 1abbb07c96..d05e666a74 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -97,8 +97,10 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
 	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
 	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
 
-	configure_mr(nr, 0);
-	configure_mr(nr, 1);
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) {
+		configure_mr(nr, 0);
+		configure_mr(nr, 1);
+	}
 }
 
 /**
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 5a3f2858cd..cd6289b4fc 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -50,20 +50,6 @@ inline u32 emif_num(u32 base)
 		return 0;
 }
 
-/*
- * Get SDRAM type connected to EMIF.
- * Assuming similar SDRAM parts are connected to both EMIF's
- * which is typically the case. So it is sufficient to get
- * SDRAM type from EMIF1.
- */
-u32 emif_sdram_type()
-{
-	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
-
-	return (readl(&emif->emif_sdram_config) &
-		EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
-}
-
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
 	u32 mr;
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 6af4b84e56..c1777dfdc9 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -136,6 +136,14 @@
 #define  LPDDR2_DATA2_IOCTRL_VALUE   0x20000294
 #define  LPDDR2_DATA3_IOCTRL_VALUE   0x20000294
 
+#define  DDR3_ADDRCTRL_WD0_IOCTRL_VALUE 0x00000000
+#define  DDR3_ADDRCTRL_WD1_IOCTRL_VALUE 0x00000000
+#define  DDR3_ADDRCTRL_IOCTRL_VALUE   0x84
+#define  DDR3_DATA0_IOCTRL_VALUE   0x84
+#define  DDR3_DATA1_IOCTRL_VALUE   0x84
+#define  DDR3_DATA2_IOCTRL_VALUE   0x84
+#define  DDR3_DATA3_IOCTRL_VALUE   0x84
+
 /**
  * Configure DMM
  */
diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h
index 13a047fd72..a1ffd49f79 100644
--- a/arch/arm/include/asm/arch-am33xx/gpio.h
+++ b/arch/arm/include/asm/arch-am33xx/gpio.h
@@ -13,4 +13,16 @@
 #define AM33XX_GPIO2_BASE       0x481AC000
 #define AM33XX_GPIO3_BASE       0x481AE000
 
+#define GPIO_22			22
+
+/* GPIO CTRL register */
+#define GPIO_CTRL_DISABLEMODULE_SHIFT	0
+#define GPIO_CTRL_DISABLEMODULE_MASK	(1 << 0)
+#define GPIO_CTRL_ENABLEMODULE		GPIO_CTRL_DISABLEMODULE_MASK
+
+/* GPIO OUTPUT ENABLE register */
+#define GPIO_OE_ENABLE(x)		(1 << x)
+
+/* GPIO SETDATAOUT register */
+#define GPIO_SETDATAOUT(x)		(1 << x)
 #endif /* _GPIO_AM33xx_H */
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index e68c113e28..45668ca4dd 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -1160,6 +1160,20 @@ static inline u32 get_emif_rev(u32 base)
 		>> EMIF_REG_MAJOR_REVISION_SHIFT;
 }
 
+/*
+ * Get SDRAM type connected to EMIF.
+ * Assuming similar SDRAM parts are connected to both EMIF's
+ * which is typically the case. So it is sufficient to get
+ * SDRAM type from EMIF1.
+ */
+static inline u32 emif_sdram_type(void)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+
+	return (readl(&emif->emif_sdram_config) &
+		EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
+}
+
 /* assert macros */
 #if defined(DEBUG)
 #define emif_assert(c)	({ if (!(c)) for (;;); })
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 5a013e3384..ed87cd97b0 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -16,6 +16,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/ddr_defs.h>
+#include <asm/arch/gpio.h>
 #include <asm/emif.h>
 #include "board.h"
 
@@ -179,10 +180,70 @@ const u32 ext_phy_ctrl_const_base_lpddr2[] = {
 	0x08102040
 };
 
+const struct ctrl_ioregs ioregs_ddr3 = {
+	.cm0ioctl		= DDR3_ADDRCTRL_IOCTRL_VALUE,
+	.cm1ioctl		= DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
+	.cm2ioctl		= DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
+	.dt0ioctl		= DDR3_DATA0_IOCTRL_VALUE,
+	.dt1ioctl		= DDR3_DATA0_IOCTRL_VALUE,
+	.dt2ioctrl		= DDR3_DATA0_IOCTRL_VALUE,
+	.dt3ioctrl		= DDR3_DATA0_IOCTRL_VALUE,
+	.emif_sdram_config_ext	= 0x0043,
+};
+
+const struct emif_regs ddr3_emif_regs_400Mhz = {
+	.sdram_config			= 0x638413B2,
+	.ref_ctrl			= 0x00000C30,
+	.sdram_tim1			= 0xEAAAD4DB,
+	.sdram_tim2			= 0x266B7FDA,
+	.sdram_tim3			= 0x107F8678,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x50074BE4,
+	.temp_alert_config		= 0x0,
+	.emif_ddr_phy_ctlr_1		= 0x0E084008,
+	.emif_ddr_ext_phy_ctrl_1	= 0x08020080,
+	.emif_ddr_ext_phy_ctrl_2	= 0x00400040,
+	.emif_ddr_ext_phy_ctrl_3	= 0x00400040,
+	.emif_ddr_ext_phy_ctrl_4	= 0x00400040,
+	.emif_ddr_ext_phy_ctrl_5	= 0x00400040,
+	.emif_rd_wr_lvl_rmp_win		= 0x0,
+	.emif_rd_wr_lvl_rmp_ctl		= 0x0,
+	.emif_rd_wr_lvl_ctl		= 0x0,
+	.emif_rd_wr_exec_thresh		= 0x00000405
+};
+
+const u32 ext_phy_ctrl_const_base_ddr3[] = {
+	0x00400040,
+	0x00350035,
+	0x00350035,
+	0x00350035,
+	0x00350035,
+	0x00350035,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00340034,
+	0x00340034,
+	0x00340034,
+	0x00340034,
+	0x00340034,
+	0x0,
+	0x0,
+	0x40000000,
+	0x08102040
+};
+
 void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
 {
-	*regs = ext_phy_ctrl_const_base_lpddr2;
-	*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
+	if (board_is_eposevm()) {
+		*regs = ext_phy_ctrl_const_base_lpddr2;
+		*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
+	} else if (board_is_gpevm()) {
+		*regs = ext_phy_ctrl_const_base_ddr3;
+		*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
+	}
 
 	return;
 }
@@ -280,9 +341,35 @@ void set_mux_conf_regs(void)
 	enable_board_pin_mux();
 }
 
+static void enable_vtt_regulator(void)
+{
+	u32 temp;
+
+	/* enable module */
+	writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL);
+
+	/* enable output for GPIO0_22 */
+	writel(GPIO_SETDATAOUT(GPIO_22),
+	       AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT);
+	temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
+	temp = temp & ~(GPIO_OE_ENABLE(GPIO_22));
+	writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
+}
+
 void sdram_init(void)
 {
-	config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
+	/*
+	 * EPOS EVM has 1GB LPDDR2 connected to EMIF.
+	 * GP EMV has 1GB DDR3 connected to EMIF
+	 * along with VTT regulator.
+	 */
+	if (board_is_eposevm()) {
+		config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
+	} else if (board_is_gpevm()) {
+		enable_vtt_regulator();
+		config_ddr(0, &ioregs_ddr3, NULL, NULL,
+			   &ddr3_emif_regs_400Mhz, 0);
+	}
 }
 #endif
 
diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c
index a2d72dde5f..810b1941db 100644
--- a/board/ti/am43xx/mux.c
+++ b/board/ti/am43xx/mux.c
@@ -33,6 +33,11 @@ static struct module_pin_mux i2c0_pin_mux[] = {
 	{-1},
 };
 
+static struct module_pin_mux gpio0_22_pin_mux[] = {
+	{OFFSET(ddr_ba2), (MODE(9) | PULLUP_EN)},	/* GPIO0_22 */
+	{-1},
+};
+
 void enable_uart0_pin_mux(void)
 {
 	configure_module_pin_mux(uart0_pin_mux);
@@ -42,6 +47,9 @@ void enable_board_pin_mux(void)
 {
 	configure_module_pin_mux(mmc0_pin_mux);
 	configure_module_pin_mux(i2c0_pin_mux);
+
+	if (board_is_gpevm())
+		configure_module_pin_mux(gpio0_22_pin_mux);
 }
 
 void enable_i2c0_pin_mux(void)