diff options
author | Tom Rini <trini@konsulko.com> | 2015-12-11 09:06:51 -0500 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-12-11 09:06:51 -0500 |
commit | a5d4785ccb4ae8c5414490b14a9112a944318217 (patch) | |
tree | 74d76f621df6a201b4a6fe90bd31b8154247deb4 | |
parent | 0305be1087a0d3b7058c5761e9cbc26a1b3fbd2c (diff) | |
parent | bb3654629a6b2ab131de96489f70421f6a848c70 (diff) |
Merge branch 'master' of http://git.denx.de/u-boot-sunxi
103 files changed, 1701 insertions, 114 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fb9176b8a9c..7383975a645 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -524,6 +524,7 @@ config ARCH_SUNXI select OF_SEPARATE select SPL_STACK_R if !MACH_SUN9I select SPL_SYS_MALLOC_SIMPLE if !MACH_SUN9I + select SYS_NS16550 select USB select USB_STORAGE select USB_KEYBOARD diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 33c76ef59d3..dfb0a3e3c09 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -26,13 +26,18 @@ obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o +ifdef CONFIG_MACH_SUN8I_A83T +obj-y += clock_sun8i_a83t.o +else obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o +endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o obj-$(CONFIG_MACH_SUN6I) += tzpc.o obj-$(CONFIG_AXP152_POWER) += pmic_bus.o obj-$(CONFIG_AXP209_POWER) += pmic_bus.o obj-$(CONFIG_AXP221_POWER) += pmic_bus.o +obj-$(CONFIG_AXP818_POWER) += pmic_bus.o ifndef CONFIG_SPL_BUILD ifdef CONFIG_ARMV7_PSCI @@ -49,6 +54,7 @@ obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o +obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o obj-y += fel_utils.o endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 0f26cb00f2b..7dfb7f5340d 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -76,6 +76,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0); sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T) + sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0); + sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I) sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0); diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index 7c8eff959bd..7e6bd6137e9 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -59,7 +59,7 @@ void clock_init_uart(void) /* open the clock for uart */ setbits_le32(&ccm->apb1_gate, - CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1)); + CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX - 1)); } int clock_twi_onoff(int port, int state) @@ -67,16 +67,13 @@ int clock_twi_onoff(int port, int state) struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - if (port > 2) - return -1; - /* set the apb clock gate for twi */ if (state) setbits_le32(&ccm->apb1_gate, - CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port)); else clrbits_le32(&ccm->apb1_gate, - CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port)); return 0; } diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index 916ee48e4bb..4501884e1c2 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -77,9 +77,6 @@ int clock_twi_onoff(int port, int state) struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - if (port > 3) - return -1; - /* set the apb clock gate for twi */ if (state) setbits_le32(&ccm->apb2_gate, diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun8i_a83t.c b/arch/arm/cpu/armv7/sunxi/clock_sun8i_a83t.c new file mode 100644 index 00000000000..3e8728fff6c --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock_sun8i_a83t.c @@ -0,0 +1,136 @@ +/* + * A83 specific clock code + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/prcm.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_SPL_BUILD +void clock_init_safe(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + clock_set_pll1(408000000); + /* enable pll_hsic, default is 480M */ + writel(PLL8_CFG_DEFAULT, &ccm->pll8_cfg); + writel(readl(&ccm->pll8_cfg) | (0x1 << 31), &ccm->pll8_cfg); + while (!(readl(&ccm->pll_stable_status) & (1 << 8))) {} + + /* switch to default 24MHz before changing to hsic */ + writel(0x0, &ccm->cci400_cfg); + sdelay(50); + writel(CCM_CCI400_CLK_SEL_HSIC, &ccm->cci400_cfg); + sdelay(100); + + /* switch before changing pll6 */ + clrsetbits_le32(&ccm->ahb1_apb1_div, AHB1_CLK_SRC_MASK, + AHB1_CLK_SRC_OSC24M); + writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); + while (!(readl(&ccm->pll_stable_status) & (1 << 6))) {} + + writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div); + writel(CCM_MBUS_RESET_RESET, &ccm->mbus_reset); + writel(MBUS_CLK_DEFAULT, &ccm->mbus_clk_cfg); + + /* timestamp */ + writel(1, 0x01720000); +} +#endif + +void clock_init_uart(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* uart clock source is apb2 */ + writel(APB2_CLK_SRC_OSC24M| + APB2_CLK_RATE_N_1| + APB2_CLK_RATE_M(1), + &ccm->apb2_div); + + /* open the clock for uart */ + setbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); + + /* deassert uart reset */ + setbits_le32(&ccm->apb2_reset_cfg, + 1 << (APB2_RESET_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); +} + +#ifdef CONFIG_SPL_BUILD +void clock_set_pll1(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + const int p = 0; + + /* Switch to 24MHz clock while changing PLL1 */ + writel(AXI_DIV_2 << AXI0_DIV_SHIFT | + AXI_DIV_2 << AXI1_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << C0_CPUX_CLK_SRC_SHIFT | + CPU_CLK_SRC_OSC24M << C1_CPUX_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); + + /* clk = 24*n/p, p is ignored if clock is >288MHz */ + writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 | + CCM_PLL1_CTRL_N(clk / 24000000), + &ccm->pll1_c0_cfg); + while (!(readl(&ccm->pll_stable_status) & 0x01)) {} + + writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 | + CCM_PLL1_CTRL_N(clk / (24000000)), + &ccm->pll1_c1_cfg); + while (!(readl(&ccm->pll_stable_status) & 0x02)) {} + + /* Switch CPU to PLL1 */ + writel(AXI_DIV_2 << AXI0_DIV_SHIFT | + AXI_DIV_2 << AXI1_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << C0_CPUX_CLK_SRC_SHIFT | + CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT, + &ccm->cpu_axi_cfg); +} +#endif + +void clock_set_pll5(unsigned int clk) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + unsigned int div1 = 0, div2 = 0; + + /* A83T PLL5 DDR rate = 24000000 * (n+1)/(div1+1)/(div2+1) */ + writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD | + CCM_PLL5_CTRL_N(clk / (24000000)) | + div2 << CCM_PLL5_DIV2_SHIFT | + div1 << CCM_PLL5_DIV1_SHIFT, &ccm->pll5_cfg); + + udelay(5500); +} + + +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT); + int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >> + CCM_PLL6_CTRL_DIV1_SHIFT) + 1; + int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >> + CCM_PLL6_CTRL_DIV2_SHIFT) + 1; + return 24000000 * n / div1 / div2; +} diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index 1e73332d7e6..b9bc70ca86a 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -73,6 +73,8 @@ int print_cpuinfo(void) puts("CPU: Allwinner H3 (SUN8I)\n"); #elif defined CONFIG_MACH_SUN9I puts("CPU: Allwinner A80 (SUN9I)\n"); +#elif defined CONFIG_MACH_SUN8I_A83T + puts("CPU: Allwinner A83T (SUN8I)\n"); #else #warning Please update cpu_info.c with correct CPU information puts("CPU: SUNXI Family\n"); diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c new file mode 100644 index 00000000000..d757e403dc0 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c @@ -0,0 +1,424 @@ +/* + * Sun8i a33 platform dram controller init. + * + * (C) Copyright 2007-2015 Allwinner Technology Co. + * Jerry Wang <wangflord@allwinnertech.com> + * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com> + * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/dram.h> +#include <asm/arch/prcm.h> + +#define DRAM_CLK_MUL 2 +#define DRAM_CLK_DIV 1 + +struct dram_para { + u8 cs1; + u8 seq; + u8 bank; + u8 rank; + u8 rows; + u8 bus_width; + u16 page_size; +}; + +static void mctl_set_cr(struct dram_para *para) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN | + MCTL_CR_CHANNEL(1) | MCTL_CR_DDR3 | + (para->seq ? MCTL_CR_SEQUENCE : 0) | + ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) | + MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) | + MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank), + &mctl_com->cr); +} + +static void auto_detect_dram_size(struct dram_para *para) +{ + u8 orig_rank = para->rank; + int rows, columns; + + /* Row detect */ + para->page_size = 512; + para->seq = 1; + para->rows = 16; + para->rank = 1; + mctl_set_cr(para); + for (rows = 11 ; rows < 16 ; rows++) { + if (mctl_mem_matches(1 << (rows + 9))) /* row-column */ + break; + } + + /* Column (page size) detect */ + para->rows = 11; + para->page_size = 8192; + mctl_set_cr(para); + for (columns = 9 ; columns < 13 ; columns++) { + if (mctl_mem_matches(1 << columns)) + break; + } + + para->seq = 0; + para->rank = orig_rank; + para->rows = rows; + para->page_size = 1 << columns; + mctl_set_cr(para); +} + +static inline int ns_to_t(int nanoseconds) +{ + const unsigned int ctrl_freq = + CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV; + + return (ctrl_freq * nanoseconds + 999) / 1000; +} + +static void auto_set_timing_para(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + u32 reg_val; + + u8 tccd = 2; + u8 tfaw = ns_to_t(50); + u8 trrd = max(ns_to_t(10), 4); + u8 trcd = ns_to_t(15); + u8 trc = ns_to_t(53); + u8 txp = max(ns_to_t(8), 3); + u8 twtr = max(ns_to_t(8), 4); + u8 trtp = max(ns_to_t(8), 4); + u8 twr = max(ns_to_t(15), 3); + u8 trp = ns_to_t(15); + u8 tras = ns_to_t(38); + + u16 trefi = ns_to_t(7800) / 32; + u16 trfc = ns_to_t(350); + + /* Fixed timing parameters */ + u8 tmrw = 0; + u8 tmrd = 4; + u8 tmod = 12; + u8 tcke = 3; + u8 tcksrx = 5; + u8 tcksre = 5; + u8 tckesr = 4; + u8 trasmax = 24; + u8 tcl = 6; /* CL 12 */ + u8 tcwl = 4; /* CWL 8 */ + u8 t_rdata_en = 4; + u8 wr_latency = 2; + + u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */ + u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */ + u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */ + u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */ + + u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */ + u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */ + u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */ + + /* Set work mode register */ + mctl_set_cr(para); + /* Set mode register */ + writel(MCTL_MR0, &mctl_ctl->mr0); + writel(MCTL_MR1, &mctl_ctl->mr1); + writel(MCTL_MR2, &mctl_ctl->mr2); + writel(MCTL_MR3, &mctl_ctl->mr3); + /* Set dram timing */ + reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0); + writel(reg_val, &mctl_ctl->dramtmg0); + reg_val = (txp << 16) | (trtp << 8) | (trc << 0); + writel(reg_val, &mctl_ctl->dramtmg1); + reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0); + writel(reg_val, &mctl_ctl->dramtmg2); + reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0); + writel(reg_val, &mctl_ctl->dramtmg3); + reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0); + writel(reg_val, &mctl_ctl->dramtmg4); + reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0); + writel(reg_val, &mctl_ctl->dramtmg5); + /* Set two rank timing and exit self-refresh timing */ + reg_val = readl(&mctl_ctl->dramtmg8); + reg_val &= ~(0xff << 8); + reg_val &= ~(0xff << 0); + reg_val |= (0x33 << 8); + reg_val |= (0x8 << 0); + writel(reg_val, &mctl_ctl->dramtmg8); + /* Set phy interface time */ + reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) + | (wr_latency << 0); + /* PHY interface write latency and read latency configure */ + writel(reg_val, &mctl_ctl->pitmg0); + /* Set phy time PTR0-2 use default */ + writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3); + writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4); + /* Set refresh timing */ + reg_val = (trefi << 16) | (trfc << 0); + writel(reg_val, &mctl_ctl->rfshtmg); +} + +static void mctl_set_pir(u32 val) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + writel(val, &mctl_ctl->pir); + mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1); +} + +static void mctl_data_train_cfg(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + if (para->rank == 2) + clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24); + else + clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24); +} + +static int mctl_train_dram(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + mctl_data_train_cfg(para); + mctl_set_pir(0x5f3); + + return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0; +} + +static void set_master_priority(void) +{ + writel(0x00a0000d, MCTL_MASTER_CFG0(0)); + writel(0x00500064, MCTL_MASTER_CFG1(0)); + writel(0x07000009, MCTL_MASTER_CFG0(1)); + writel(0x00000600, MCTL_MASTER_CFG1(1)); + writel(0x01000009, MCTL_MASTER_CFG0(3)); + writel(0x00000064, MCTL_MASTER_CFG1(3)); + writel(0x08000009, MCTL_MASTER_CFG0(4)); + writel(0x00000640, MCTL_MASTER_CFG1(4)); + writel(0x20000308, MCTL_MASTER_CFG0(8)); + writel(0x00001000, MCTL_MASTER_CFG1(8)); + writel(0x02800009, MCTL_MASTER_CFG0(9)); + writel(0x00000100, MCTL_MASTER_CFG1(9)); + writel(0x01800009, MCTL_MASTER_CFG0(5)); + writel(0x00000100, MCTL_MASTER_CFG1(5)); + writel(0x01800009, MCTL_MASTER_CFG0(7)); + writel(0x00000100, MCTL_MASTER_CFG1(7)); + writel(0x00640009, MCTL_MASTER_CFG0(6)); + writel(0x00000032, MCTL_MASTER_CFG1(6)); + writel(0x0100000d, MCTL_MASTER_CFG0(2)); + writel(0x00500080, MCTL_MASTER_CFG1(2)); +} + +static int mctl_channel_init(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + u32 low_data_lines_status; /* Training status of datalines 0 - 7 */ + u32 high_data_lines_status; /* Training status of datalines 8 - 15 */ + u32 i, rval; + + auto_set_timing_para(para); + + /* Set dram master access priority */ + writel(0x000101a0, &mctl_com->bwcr); + /* set cpu high priority */ + writel(0x1, &mctl_com->mapr); + set_master_priority(); + udelay(250); + + /* Disable dram VTC */ + clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0 | 0x1 << 30); + clrsetbits_le32(&mctl_ctl->pgcr1, 0x1 << 24, 0x1 << 26); + + writel(0x94be6fa3, MCTL_PROTECT); + udelay(100); + clrsetbits_le32(MX_UPD2, 0xfff << 16, 0x50 << 26); + writel(0x0, MCTL_PROTECT); + udelay(100); + + + /* Set ODT */ + if (IS_ENABLED(CONFIG_DRAM_ODT_EN)) + rval = 0x0; + else + rval = 0x2; + + for (i = 0 ; i < 11 ; i++) { + clrsetbits_le32(DATX0IOCR(i), (0x3 << 24) | (0x3 << 16), + rval << 24); + clrsetbits_le32(DATX1IOCR(i), (0x3 << 24) | (0x3 << 16), + rval << 24); + clrsetbits_le32(DATX2IOCR(i), (0x3 << 24) | (0x3 << 16), + rval << 24); + clrsetbits_le32(DATX3IOCR(i), (0x3 << 24) | (0x3 << 16), + rval << 24); + } + + for (i = 0; i < 31; i++) + clrsetbits_le32(CAIOCR(i), 0x3 << 26 | 0x3 << 16, 0x2 << 26); + + /* set PLL configuration */ + if (CONFIG_DRAM_CLK >= 480) + setbits_le32(&mctl_ctl->pllgcr, 0x1 << 19); + else + setbits_le32(&mctl_ctl->pllgcr, 0x3 << 19); + + /* Auto detect dram config, set 2 rank and 16bit bus-width */ + para->cs1 = 0; + para->rank = 2; + para->bus_width = 16; + mctl_set_cr(para); + + /* Open DQS gating */ + clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6)); + clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7)); + + if (readl(&mctl_com->cr) & 0x1) + writel(0x00000303, &mctl_ctl->odtmap); + else + writel(0x00000201, &mctl_ctl->odtmap); + + mctl_data_train_cfg(para); + /* ZQ calibration */ + clrsetbits_le32(ZQnPR(0), 0x000000ff, CONFIG_DRAM_ZQ & 0xff); + clrsetbits_le32(ZQnPR(1), 0x000000ff, (CONFIG_DRAM_ZQ >> 8) & 0xff); + /* CA calibration */ + mctl_set_pir(0x0201f3 | 0x1<<10); + + /* DQS gate training */ + if (mctl_train_dram(para) != 0) { + low_data_lines_status = (readl(DXnGSR0(0)) >> 24) & 0x03; + high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03; + + if (low_data_lines_status == 0x3) + return -EIO; + + /* DRAM has only one rank */ + para->rank = 1; + mctl_set_cr(para); + + if (low_data_lines_status == high_data_lines_status) + goto done; /* 16 bit bus, 1 rank */ + + if (!(low_data_lines_status & high_data_lines_status)) { + /* Retry 16 bit bus-width with CS1 set */ + para->cs1 = 1; + mctl_set_cr(para); + if (mctl_train_dram(para) == 0) + goto done; + } + + /* Try 8 bit bus-width */ + writel(0x0, DXnGCR0(1)); /* Disable high DQ */ + para->cs1 = 0; + para->bus_width = 8; + mctl_set_cr(para); + if (mctl_train_dram(para) != 0) + return -EIO; + } +done: + /* Check the dramc status */ + mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1); + + /* Close DQS gating */ + setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6); + + /* set PGCR3,CKE polarity */ + writel(0x00aa0060, &mctl_ctl->pgcr3); + /* Enable master access */ + writel(0xffffffff, &mctl_com->maer); + + return 0; +} + +static void mctl_sys_init(struct dram_para *para) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + clrbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE); + clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET); + clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); + clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); + clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN); + clrbits_le32(&ccm->dram_clk_cfg, 0x01<<31); + + clock_set_pll5(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL); + + clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK, + CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) | + CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD); + mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0); + + setbits_le32(&ccm->ahb_reset0_cfg, 1 << 14); + setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); + setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET); + setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE); + + setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); + setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); + setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET); + setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE); + + /* Set dram master access priority */ + writel(0x0000e00f, &mctl_ctl->clken); /* normal */ + + udelay(250); +} + +unsigned long sunxi_dram_init(void) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + struct dram_para para = { + .cs1 = 0, + .bank = 1, + .rank = 1, + .rows = 15, + .bus_width = 16, + .page_size = 2048, + }; + + setbits_le32(SUNXI_PRCM_BASE + 0x1e0, 0x1 << 8); + + writel(0, (SUNXI_PRCM_BASE + 0x1e8)); + udelay(10); + + mctl_sys_init(¶); + + if (mctl_channel_init(¶) != 0) + return 0; + + auto_detect_dram_size(¶); + + /* Enable master software clk */ + writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr); + + /* Set DRAM ODT MAP */ + if (para.rank == 2) + writel(0x00000303, &mctl_ctl->odtmap); + else + writel(0x00000201, &mctl_ctl->odtmap); + + return para.page_size * (para.bus_width / 8) * + (1 << (para.bank + para.rank + para.rows)); +} diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c index b721d6011ae..2020d75fd14 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_h3.c @@ -73,10 +73,10 @@ static void mctl_dq_delay(u32 read, u32 write) for (i = 0; i < 4; i++) { val = DATX_IOCR_WRITE_DELAY((write >> (i * 4)) & 0xf) | - DATX_IOCR_READ_DELAY((read >> (i * 4)) & 0xf); + DATX_IOCR_READ_DELAY(((read >> (i * 4)) & 0xf) * 2); for (j = DATX_IOCR_DQ(0); j <= DATX_IOCR_DM; j++) - setbits_le32(&mctl_ctl->datx[i].iocr[j], val); + writel(val, &mctl_ctl->datx[i].iocr[j]); } clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26); @@ -85,8 +85,8 @@ static void mctl_dq_delay(u32 read, u32 write) val = DATX_IOCR_WRITE_DELAY((write >> (16 + i * 4)) & 0xf) | DATX_IOCR_READ_DELAY((read >> (16 + i * 4)) & 0xf); - setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQS], val); - setbits_le32(&mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN], val); + writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQS]); + writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN]); } setbits_le32(&mctl_ctl->pgcr[0], 1 << 26); @@ -436,8 +436,8 @@ unsigned long sunxi_dram_init(void) (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; struct dram_para para = { - .read_delays = 0x00007979, - .write_delays = 0x6aaa0000, + .read_delays = 0x00007979, /* dram_tpr12 */ + .write_delays = 0x6aaa0000, /* dram_tpr11 */ .dual_rank = 0, .bus_width = 32, .row_bits = 15, diff --git a/arch/arm/cpu/armv7/sunxi/pmic_bus.c b/arch/arm/cpu/armv7/sunxi/pmic_bus.c index 9e0512725b4..5b81a8d8e12 100644 --- a/arch/arm/cpu/armv7/sunxi/pmic_bus.c +++ b/arch/arm/cpu/armv7/sunxi/pmic_bus.c @@ -23,6 +23,7 @@ #define AXP221_CTRL_ADDR 0x3e #define AXP221_INIT_DATA 0x3e +/* AXP818 device and runtime addresses are same as AXP223 */ #define AXP223_DEVICE_ADDR 0x3a3 #define AXP223_RUNTIME_ADDR 0x2d @@ -35,7 +36,7 @@ int pmic_bus_init(void) if (!needs_init) return 0; -#ifdef CONFIG_AXP221_POWER +#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER # ifdef CONFIG_MACH_SUN6I p2wi_init(); ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR, @@ -61,7 +62,7 @@ int pmic_bus_read(u8 reg, u8 *data) return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1); #elif defined CONFIG_AXP209_POWER return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1); -#elif defined CONFIG_AXP221_POWER +#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER # ifdef CONFIG_MACH_SUN6I return p2wi_read(reg, data); # else @@ -76,7 +77,7 @@ int pmic_bus_write(u8 reg, u8 data) return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1); #elif defined CONFIG_AXP209_POWER return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1); -#elif defined CONFIG_AXP221_POWER +#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER # ifdef CONFIG_MACH_SUN6I return p2wi_write(reg, data); # else diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 521aa4cff46..03f984a3ccf 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -176,6 +176,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb +dtb-$(CONFIG_MACH_SUN8I_A83T) += \ + sun8i-a83t-allwinner-h8homlet-v2.dtb dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-pc.dtb \ sun8i-h3-orangepi-plus.dtb diff --git a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts new file mode 100644 index 00000000000..342e1d33fa1 --- /dev/null +++ b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; + compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi new file mode 100644 index 00000000000..245b819d102 --- /dev/null +++ b/arch/arm/dts/sun8i-a83t.dtsi @@ -0,0 +1,247 @@ +/* + * Copyright 2015 Vishnu Patekar + * + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + cpu@100 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu@101 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x101>; + }; + cpu@102 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu@103 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a83t-pinctrl"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01c20800 0x400>; + clocks = <&osc24M>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB9", "PB10"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 3e5d9990819..8ca58ae5216 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -15,7 +15,9 @@ #define CLK_GATE_CLOSE 0x0 /* clock control module regs definition */ -#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) +#if defined(CONFIG_MACH_SUN8I_A83T) +#include <asm/arch/clock_sun8i_a83t.h> +#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) #include <asm/arch/clock_sun6i.h> #elif defined(CONFIG_MACH_SUN9I) #include <asm/arch/clock_sun9i.h> diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 09337a1deaf..5c762751126 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -220,11 +220,7 @@ struct sunxi_ccm_reg { #define CCM_PLL11_CTRL_UPD (0x1 << 30) #define CCM_PLL11_CTRL_EN (0x1 << 31) -#if defined CONFIG_MACH_SUN8I_H3 #define AHB1_ABP1_DIV_DEFAULT 0x00003180 /* AHB1=PLL6/3,APB1=AHB1/2 */ -#else -#define AHB1_ABP1_DIV_DEFAULT 0x00002020 /* AHB1=AXI/4, APB1=AHB1/2 */ -#endif #define AXI_GATE_OFFSET_DRAM 0 diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h b/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h new file mode 100644 index 00000000000..5f93d7f39d4 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h @@ -0,0 +1,304 @@ +/* + * sun8i a83t clock register definitions + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com> + * from sun6i.h + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_SUN8I_A83T_H +#define _SUNXI_CLOCK_SUN8I_A83T_H + +struct sunxi_ccm_reg { + u32 pll1_c0_cfg; /* 0x00 c1cpu# pll control */ + u32 pll1_c1_cfg; /* 0x04 c1cpu# pll control */ + u32 pll2_cfg; /* 0x08 pll2 audio control */ + u32 reserved1; + u32 pll3_cfg; /* 0x10 pll3 video0 control */ + u32 reserved2; + u32 pll4_cfg; /* 0x18 pll4 ve control */ + u32 reserved3; + u32 pll5_cfg; /* 0x20 pll5 ddr control */ + u32 reserved4; + u32 pll6_cfg; /* 0x28 pll6 peripheral control */ + u32 reserved5[3]; /* 0x2c */ + u32 pll7_cfg; /* 0x38 pll7 gpu control */ + u32 reserved6[2]; /* 0x3c */ + u32 pll8_cfg; /* 0x44 pll8 hsic control */ + u32 pll9_cfg; /* 0x48 pll9 de control */ + u32 pll10_cfg; /* 0x4c pll10 video1 control */ + u32 cpu_axi_cfg; /* 0x50 CPU/AXI divide ratio */ + u32 ahb1_apb1_div; /* 0x54 AHB1/APB1 divide ratio */ + u32 apb2_div; /* 0x58 APB2 divide ratio */ + u32 ahb2_div; /* 0x5c AHB2 divide ratio */ + u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ + u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ + u32 apb1_gate; /* 0x68 apb1 module clock gating 3 */ + u32 apb2_gate; /* 0x6c apb2 module clock gating 4 */ + u32 reserved7[2]; /* 0x70 */ + u32 cci400_cfg; /* 0x78 cci400 clock configuration A83T only */ + u32 reserved8; /* 0x7c */ + u32 nand0_clk_cfg; /* 0x80 nand clock control */ + u32 reserved9; /* 0x84 */ + u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ + u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ + u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ + u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ + u32 reserved10; /* 0x98 */ + u32 ss_clk_cfg; /* 0x9c security system clock control */ + u32 spi0_clk_cfg; /* 0xa0 spi0 clock control */ + u32 spi1_clk_cfg; /* 0xa4 spi1 clock control */ + u32 reserved11[2]; /* 0xa8 */ + u32 i2s0_clk_cfg; /* 0xb0 I2S0 clock control */ + u32 i2s1_clk_cfg; /* 0xb4 I2S1 clock control */ + u32 i2s2_clk_cfg; /* 0xb8 I2S2 clock control */ + u32 tdm_clk_cfg; /* 0xbc TDM clock control */ + u32 spdif_clk_cfg; /* 0xc0 SPDIF clock control */ + u32 reserved12[2]; /* 0xc4 */ + u32 usb_clk_cfg; /* 0xcc USB clock control */ + u32 reserved13[9]; /* 0xd0 */ + u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */ + u32 dram_pll_cfg; /* 0xf8 PLL_DDR cfg register */ + u32 mbus_reset; /* 0xfc MBUS reset control */ + u32 dram_clk_gate; /* 0x100 DRAM module gating */ + u32 reserved14[5]; /* 0x104 BE0 */ + u32 lcd0_clk_cfg; /* 0x118 LCD0 module clock */ + u32 lcd1_clk_cfg; /* 0x11c LCD1 module clock */ + u32 reserved15[4]; /* 0x120 */ + u32 mipi_csi_clk_cfg; /* 0x130 MIPI CSI module clock */ + u32 csi_clk_cfg; /* 0x134 CSI module clock */ + u32 reserved16; /* 0x138 */ + u32 ve_clk_cfg; /* 0x13c VE module clock */ + u32 reserved17; /* 0x140 */ + u32 avs_clk_cfg; /* 0x144 AVS module clock */ + u32 reserved18[2]; /* 0x148 */ + u32 hdmi_clk_cfg; /* 0x150 HDMI module clock */ + u32 hdmi_slow_clk_cfg; /* 0x154 HDMI slow module clock */ + u32 reserved19; /* 0x158 */ + u32 mbus_clk_cfg; /* 0x15c MBUS module clock */ + u32 reserved20[2]; /* 0x160 */ + u32 mipi_dsi_clk_cfg; /* 0x168 MIPI DSI clock control */ + u32 reserved21[13]; /* 0x16c */ + u32 gpu_core_clk_cfg; /* 0x1a0 GPU core clock config */ + u32 gpu_mem_clk_cfg; /* 0x1a4 GPU memory clock config */ + u32 gpu_hyd_clk_cfg; /* 0x1a8 GPU HYD clock config */ + u32 reserved22[21]; /* 0x1ac */ + u32 pll_stable0; /* 0x200 PLL stable time 0 */ + u32 pll_stable1; /* 0x204 PLL stable time 1 */ + u32 reserved23; /* 0x208 */ + u32 pll_stable_status; /* 0x20c PLL stable status register */ + u32 reserved24[4]; /* 0x210 */ + u32 pll1_c0_bias_cfg; /* 0x220 PLL1 c0cpu# Bias config */ + u32 pll2_bias_cfg; /* 0x224 PLL2 audio Bias config */ + u32 pll3_bias_cfg; /* 0x228 PLL3 video Bias config */ + u32 pll4_bias_cfg; /* 0x22c PLL4 ve Bias config */ + u32 pll5_bias_cfg; /* 0x230 PLL5 ddr Bias config */ + u32 pll6_bias_cfg; /* 0x234 PLL6 periph Bias config */ + u32 pll1_c1_bias_cfg; /* 0x238 PLL1 c1cpu# Bias config */ + u32 pll8_bias_cfg; /* 0x23c PLL7 Bias config */ + u32 reserved25; /* 0x240 */ + u32 pll9_bias_cfg; /* 0x244 PLL9 hsic Bias config */ + u32 de_bias_cfg; /* 0x248 display engine Bias config */ + u32 video1_bias_cfg; /* 0x24c pll video1 bias register */ + u32 c0_tuning_cfg; /* 0x250 pll c0cpu# tuning register */ + u32 c1_tuning_cfg; /* 0x254 pll c1cpu# tuning register */ + u32 reserved26[11]; /* 0x258 */ + u32 pll2_pattern_cfg0; /* 0x284 PLL2 Pattern register 0 */ + u32 pll3_pattern_cfg0; /* 0x288 PLL3 Pattern register 0 */ + u32 reserved27; /* 0x28c */ + u32 pll5_pattern_cfg0; /* 0x290 PLL5 Pattern register 0*/ + u32 reserved28[4]; /* 0x294 */ + u32 pll2_pattern_cfg1; /* 0x2a4 PLL2 Pattern register 1 */ + u32 pll3_pattern_cfg1; /* 0x2a8 PLL3 Pattern register 1 */ + u32 reserved29; /* 0x2ac */ + u32 pll5_pattern_cfg1; /* 0x2b0 PLL5 Pattern register 1 */ + u32 reserved30[3]; /* 0x2b4 */ + u32 ahb_reset0_cfg; /* 0x2c0 AHB1 Reset 0 config */ + u32 ahb_reset1_cfg; /* 0x2c4 AHB1 Reset 1 config */ + u32 ahb_reset2_cfg; /* 0x2c8 AHB1 Reset 2 config */ + u32 reserved31; + u32 ahb_reset3_cfg; /* 0x2d0 AHB1 Reset 3 config */ + u32 reserved32; /* 0x2d4 */ + u32 apb2_reset_cfg; /* 0x2d8 BUS Reset 4 config */ +}; + +/* apb2 bit field */ +#define APB2_CLK_SRC_LOSC (0x0 << 24) +#define APB2_CLK_SRC_OSC24M (0x1 << 24) +#define APB2_CLK_SRC_PLL6 (0x2 << 24) +#define APB2_CLK_SRC_MASK (0x3 << 24) +#define APB2_CLK_RATE_N_1 (0x0 << 16) +#define APB2_CLK_RATE_N_2 (0x1 << 16) +#define APB2_CLK_RATE_N_4 (0x2 << 16) +#define APB2_CLK_RATE_N_8 (0x3 << 16) +#define APB2_CLK_RATE_N_MASK (3 << 16) +#define APB2_CLK_RATE_M(m) (((m)-1) << 0) +#define APB2_CLK_RATE_M_MASK (0x1f << 0) + +/* apb2 gate field */ +#define APB2_GATE_UART_SHIFT (16) +#define APB2_GATE_UART_MASK (0xff << APB2_GATE_UART_SHIFT) +#define APB2_GATE_TWI_SHIFT (0) +#define APB2_GATE_TWI_MASK (0xf << APB2_GATE_TWI_SHIFT) + +/* cpu_axi_cfg bits */ +#define AXI0_DIV_SHIFT 0 +#define AXI1_DIV_SHIFT 16 +#define C0_CPUX_CLK_SRC_SHIFT 12 +#define C1_CPUX_CLK_SRC_SHIFT 28 + +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define CPU_CLK_SRC_OSC24M 0 +#define CPU_CLK_SRC_PLL1 1 + +#define CCM_PLL1_CTRL_N(n) ((((n) - 1) & 0xff) << 8) +#define CCM_PLL1_CTRL_P(n) (((n) & 0x1) << 16) +#define CCM_PLL1_CTRL_EN (0x1 << 31) +#define CMM_PLL1_CLOCK_TIME_2 (0x2 << 24) + +#define PLL8_CFG_DEFAULT 0x42800 +#define CCM_CCI400_CLK_SEL_HSIC (0x2<<24) + +#define CCM_PLL5_DIV1_SHIFT 16 +#define CCM_PLL5_DIV2_SHIFT 18 +#define CCM_PLL5_CTRL_N(n) (((n) - 1) << 8) +#define CCM_PLL5_CTRL_UPD (0x1 << 30) +#define CCM_PLL5_CTRL_EN (0x1 << 31) + +#define PLL6_CFG_DEFAULT 0x80001900 /* 600 MHz */ +#define CCM_PLL6_CTRL_N_SHIFT 8 +#define CCM_PLL6_CTRL_N_MASK (0xff << CCM_PLL6_CTRL_N_SHIFT) +#define CCM_PLL6_CTRL_DIV1_SHIFT 16 +#define CCM_PLL6_CTRL_DIV1_MASK (0x1 << CCM_PLL6_CTRL_DIV1_SHIFT) +#define CCM_PLL6_CTRL_DIV2_SHIFT 18 +#define CCM_PLL6_CTRL_DIV2_MASK (0x1 << CCM_PLL6_CTRL_DIV2_SHIFT) + +#define AHB1_ABP1_DIV_DEFAULT 0x00002190 +#define AHB1_CLK_SRC_MASK (0x3<<12) +#define AHB1_CLK_SRC_INTOSC (0x0<<12) +#define AHB1_CLK_SRC_OSC24M (0x1<<12) +#define AHB1_CLK_SRC_PLL6 (0x2<<12) + +#define AXI_GATE_OFFSET_DRAM 0 + +/* ahb_gate0 offsets */ +#define AHB_GATE_OFFSET_USB_OHCI1 30 +#define AHB_GATE_OFFSET_USB_OHCI0 29 +#define AHB_GATE_OFFSET_USB_EHCI1 27 +#define AHB_GATE_OFFSET_USB_EHCI0 26 +#define AHB_GATE_OFFSET_USB0 24 +#define AHB_GATE_OFFSET_SPI1 21 +#define AHB_GATE_OFFSET_SPI0 20 +#define AHB_GATE_OFFSET_HSTIMER 19 +#define AHB_GATE_OFFSET_EMAC 17 +#define AHB_GATE_OFFSET_MCTL 14 +#define AHB_GATE_OFFSET_GMAC 17 +#define AHB_GATE_OFFSET_NAND0 13 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) +#define AHB_GATE_OFFSET_DMA 6 +#define AHB_GATE_OFFSET_SS 5 + +/* ahb_gate1 offsets */ +#define AHB_GATE_OFFSET_DRC0 25 +#define AHB_GATE_OFFSET_DE_FE0 14 +#define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_LCD1 5 +#define AHB_GATE_OFFSET_LCD0 4 + +#define CCM_MMC_CTRL_M(x) ((x) - 1) +#define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8) +#define CCM_MMC_CTRL_N(x) ((x) << 16) +#define CCM_MMC_CTRL_SCLK_DLY(x) ((x) << 20) +#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) +#define CCM_MMC_CTRL_PLL6 (0x1 << 24) +#define CCM_MMC_CTRL_ENABLE (0x1 << 31) + +#define CCM_USB_CTRL_PHY0_RST (0x1 << 0) +#define CCM_USB_CTRL_PHY1_RST (0x1 << 1) +#define CCM_USB_CTRL_PHY2_RST (0x1 << 2) +/* There is no global phy clk gate on sun6i, define as 0 */ +#define CCM_USB_CTRL_PHYGATE 0 +#define CCM_USB_CTRL_PHY0_CLK (0x1 << 8) +#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9) +#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10) +#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16) +#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17) + +#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 +#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 +#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 +#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) +#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) +#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5) +#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10) + +#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */ + +#define CCM_DRAMCLK_CFG_DIV(x) ((x - 1) << 0) +#define CCM_DRAMCLK_CFG_DIV_MASK (0xf << 0) +#define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8) +#define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8) +#define CCM_DRAMCLK_CFG_UPD (0x1 << 16) +#define CCM_DRAMCLK_CFG_RST (0x1 << 31) + +#define CCM_DRAMPLL_CFG_SRC_PLL5 (0x0 << 16) /* Select PLL5 (DDR0) */ +#define CCM_DRAMPLL_CFG_SRC_PLL11 (0x1 << 16) /* Select PLL11 (DDR1) */ +#define CCM_DRAMPLL_CFG_SRC_MASK (0x1 << 16) + +#define CCM_MBUS_RESET_RESET (0x1 << 31) + +#define CCM_DRAM_GATE_OFFSET_DE_FE0 24 +#define CCM_DRAM_GATE_OFFSET_DE_FE1 25 +#define CCM_DRAM_GATE_OFFSET_DE_BE0 26 +#define CCM_DRAM_GATE_OFFSET_DE_BE1 27 + + +#define MBUS_CLK_DEFAULT 0x81000002 /* PLL6 / 2 */ + +#define MBUS_CLK_GATE (0x1 << 31) + +/* ahb_reset0 offsets */ +#define AHB_RESET_OFFSET_GMAC 17 +#define AHB_RESET_OFFSET_MCTL 14 +#define AHB_RESET_OFFSET_MMC3 11 +#define AHB_RESET_OFFSET_MMC2 10 +#define AHB_RESET_OFFSET_MMC1 9 +#define AHB_RESET_OFFSET_MMC0 8 +#define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n)) +#define AHB_RESET_OFFSET_SS 5 + +/* ahb_reset1 offsets */ +#define AHB_RESET_OFFSET_SAT 26 +#define AHB_RESET_OFFSET_DRC0 25 +#define AHB_RESET_OFFSET_DE_FE0 14 +#define AHB_RESET_OFFSET_DE_BE0 12 +#define AHB_RESET_OFFSET_HDMI 11 +#define AHB_RESET_OFFSET_LCD1 5 +#define AHB_RESET_OFFSET_LCD0 4 + +/* ahb_reset2 offsets */ +#define AHB_RESET_OFFSET_LVDS 0 + +/* apb2 reset */ +#define APB2_RESET_UART_SHIFT (16) +#define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) +#define APB2_RESET_TWI_SHIFT (0) +#define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT) + + +#ifndef __ASSEMBLY__ +void clock_set_pll1(unsigned int hz); +void clock_set_pll5(unsigned int clk); +unsigned int clock_get_pll6(void); +#endif + +#endif /* _SUNXI_CLOCK_SUN8I_A83T_H */ diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index b3c16883ed8..675876ff6cb 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -22,6 +22,8 @@ #include <asm/arch/dram_sun8i_a23.h> #elif defined(CONFIG_MACH_SUN8I_A33) #include <asm/arch/dram_sun8i_a33.h> +#elif defined(CONFIG_MACH_SUN8I_A83T) +#include <asm/arch/dram_sun8i_a83t.h> #elif defined(CONFIG_MACH_SUN8I_H3) #include <asm/arch/dram_sun8i_h3.h> #else diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h new file mode 100644 index 00000000000..2891b71b334 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h @@ -0,0 +1,201 @@ +/* + * Sun8i platform dram controller register and constant defines + * + * (C) Copyright 2007-2015 Allwinner Technology Co. + * Jerry Wang <wangflord@allwinnertech.com> + * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com> + * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DRAM_SUN8I_A83T_H +#define _SUNXI_DRAM_SUN8I_A83T_H + +struct sunxi_mctl_com_reg { + u32 cr; /* 0x00 */ + u32 ccr; /* 0x04 controller configuration register */ + u32 dbgcr; /* 0x08 */ + u8 res0[0x4]; /* 0x0c */ + u32 mcr0_0; /* 0x10 */ + u32 mcr1_0; /* 0x14 */ + u32 mcr0_1; /* 0x18 */ + u32 mcr1_1; /* 0x1c */ + u32 mcr0_2; /* 0x20 */ + u32 mcr1_2; /* 0x24 */ + u32 mcr0_3; /* 0x28 */ + u32 mcr1_3; /* 0x2c */ + u32 mcr0_4; /* 0x30 */ + u32 mcr1_4; /* 0x34 */ + u32 mcr0_5; /* 0x38 */ + u32 mcr1_5; /* 0x3c */ + u32 mcr0_6; /* 0x40 */ + u32 mcr1_6; /* 0x44 */ + u32 mcr0_7; /* 0x48 */ + u32 mcr1_7; /* 0x4c */ + u32 mcr0_8; /* 0x50 */ + u32 mcr1_8; /* 0x54 */ + u32 mcr0_9; /* 0x58 */ + u32 mcr1_9; /* 0x5c */ + u32 mcr0_10; /* 0x60 */ + u32 mcr1_10; /* 0x64 */ + u32 mcr0_11; /* 0x68 */ + u32 mcr1_11; /* 0x6c */ + u32 mcr0_12; /* 0x70 */ + u32 mcr1_12; /* 0x74 */ + u32 mcr0_13; /* 0x78 */ + u32 mcr1_13; /* 0x7c */ + u32 mcr0_14; /* 0x80 */ + u32 mcr1_14; /* 0x84 */ + u32 mcr0_15; /* 0x88 */ + u32 mcr1_15; /* 0x8c */ + u32 bwcr; /* 0x90 */ + u32 maer; /* 0x94 */ + u32 mapr; /* 0x98 */ + u32 mcgcr; /* 0x9c */ + u32 bwctr; /* 0xa0 */ + u8 res2[0x8]; /* 0xa4 */ + u32 swoffr; /* 0xac */ + u8 res3[0x10]; /* 0xb0 */ + u32 swonr; /* 0xc0 */ + u8 res4[0x3c]; /* 0xc4 */ + u32 mdfscr; /* 0x100 */ + u32 mdfsmer; /* 0x104 */ +}; + +struct sunxi_mctl_ctl_reg { + u32 pir; /* 0x00 */ + u32 pwrctl; /* 0x04 */ + u32 mrctrl0; /* 0x08 */ + u32 clken; /* 0x0c */ + u32 pgsr0; /* 0x10 */ + u32 pgsr1; /* 0x14 */ + u32 statr; /* 0x18 */ + u8 res1[0x14]; /* 0x1c */ + u32 mr0; /* 0x30 */ + u32 mr1; /* 0x34 */ + u32 mr2; /* 0x38 */ + u32 mr3; /* 0x3c */ + u32 pllgcr; /* 0x40 */ + u32 ptr0; /* 0x44 */ + u32 ptr1; /* 0x48 */ + u32 ptr2; /* 0x4c */ + u32 ptr3; /* 0x50 */ + u32 ptr4; /* 0x54 */ + u32 dramtmg0; /* 0x58 dram timing parameters register 0 */ + u32 dramtmg1; /* 0x5c dram timing parameters register 1 */ + u32 dramtmg2; /* 0x60 dram timing parameters register 2 */ + u32 dramtmg3; /* 0x64 dram timing parameters register 3 */ + u32 dramtmg4; /* 0x68 dram timing parameters register 4 */ + u32 dramtmg5; /* 0x6c dram timing parameters register 5 */ + u32 dramtmg6; /* 0x70 dram timing parameters register 6 */ + u32 dramtmg7; /* 0x74 dram timing parameters register 7 */ + u32 dramtmg8; /* 0x78 dram timing parameters register 8 */ + u32 odtcfg; /* 0x7c */ + u32 pitmg0; /* 0x80 */ + u32 pitmg1; /* 0x84 */ + u8 res2[0x4]; /* 0x88 */ + u32 rfshctl0; /* 0x8c */ + u32 rfshtmg; /* 0x90 */ + u32 rfshctl1; /* 0x94 */ + u32 pwrtmg; /* 0x98 */ + u8 res3[0x20]; /* 0x9c */ + u32 dqsgmr; /* 0xbc */ + u32 dtcr; /* 0xc0 */ + u32 dtar0; /* 0xc4 */ + u32 dtar1; /* 0xc8 */ + u32 dtar2; /* 0xcc */ + u32 dtar3; /* 0xd0 */ + u32 dtdr0; /* 0xd4 */ + u32 dtdr1; /* 0xd8 */ + u32 dtmr0; /* 0xdc */ + u32 dtmr1; /* 0xe0 */ + u32 dtbmr; /* 0xe4 */ + u32 catr0; /* 0xe8 */ + u32 catr1; /* 0xec */ + u32 dtedr0; /* 0xf0 */ + u32 dtedr1; /* 0xf4 */ + u8 res4[0x8]; /* 0xf8 */ + u32 pgcr0; /* 0x100 */ + u32 pgcr1; /* 0x104 */ + u32 pgcr2; /* 0x108 */ + u32 pgcr3; /* 0x10c */ + u32 iovcr0; /* 0x110 */ + u32 iovcr1; /* 0x114 */ + u32 dqsdr; /* 0x118 */ + u32 dxccr; /* 0x11c */ + u32 odtmap; /* 0x120 */ + u32 zqctl0; /* 0x124 */ + u32 zqctl1; /* 0x128 */ + u8 res6[0x14]; /* 0x12c */ + u32 zqncr; /* 0x140 zq control register 0 */ + u32 zqnpr; /* 0x144 zq control register 1 */ + u32 zqndr; /* 0x148 zq control register 2 */ + u32 zqnsr; /* 0x14c zq status register 0 */ + u32 res7; /* 0x150 zq status register 1 */ + u8 res8[0x6c]; /* 0x154 */ + u32 sched; /* 0x1c0 */ + u32 perfhpr0; /* 0x1c4 */ + u32 perfhpr1; /* 0x1c8 */ + u32 perflpr0; /* 0x1cc */ + u32 perflpr1; /* 0x1d0 */ + u32 perfwr0; /* 0x1d4 */ + u32 perfwr1; /* 0x1d8 */ +}; + + +#define ZQnPR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000144 + 0x10 * x) +#define ZQnDR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000148 + 0x10 * x) +#define ZQnSR(x) (SUNXI_DRAM_CTL0_BASE + 0x0000014c + 0x10 * x) + +#define DXnGTR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000340 + 0x80 * x) +#define DXnGCR0(x) (SUNXI_DRAM_CTL0_BASE + 0x00000344 + 0x80 * x) +#define DXnGSR0(x) (SUNXI_DRAM_CTL0_BASE + 0x00000348 + 0x80 * x) +#define DXnGSR1(x) (SUNXI_DRAM_CTL0_BASE + 0x0000034c + 0x80 * x) +#define DXnGSR2(x) (SUNXI_DRAM_CTL0_BASE + 0x00000350 + 0x80 * x) + +#define CAIOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000210 + 0x4 * (x)) +#define DXnMDLR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000300 + 0x80 * x) +#define DXMDLR0 (SUNXI_DRAM_CTL0_BASE + 0x00000300) +#define DXnLCDLR0(x) (SUNXI_DRAM_CTL0_BASE + 0x00000304 + 0x80 * x) +#define DXnLCDLR1(x) (SUNXI_DRAM_CTL0_BASE + 0x00000308 + 0x80 * x) +#define DXnLCDLR2(x) (SUNXI_DRAM_CTL0_BASE + 0x0000030c + 0x80 * x) +#define DATX0IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000310 + 0x4 * x) +#define DATX1IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000390 + 0x4 * x) +#define DATX2IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000410 + 0x4 * x) +#define DATX3IOCR(x) (SUNXI_DRAM_CTL0_BASE + 0x00000490 + 0x4 * x) +#define MX_UPD0 (SUNXI_DRAM_CTL0_BASE + 0x00000880) +#define MX_UPD2 (SUNXI_DRAM_CTL0_BASE + 0x00000888) + +#define MCTL_PROTECT (SUNXI_DRAM_COM_BASE + 0x800) +#define MCTL_MASTER_CFG0(x) (SUNXI_DRAM_COM_BASE + 0x10 + 0x8 * x) +#define MCTL_MASTER_CFG1(x) (SUNXI_DRAM_COM_BASE + 0x14 + 0x8 * x) + +/* + * DRAM common (sunxi_mctl_com_reg) register constants. + */ +#define MCTL_CR_RANK_MASK (3 << 0) +#define MCTL_CR_RANK(x) (((x) - 1) << 0) +#define MCTL_CR_BANK_MASK (3 << 2) +#define MCTL_CR_BANK(x) ((x) << 2) +#define MCTL_CR_ROW_MASK (0xf << 4) +#define MCTL_CR_ROW(x) (((x) - 1) << 4) +#define MCTL_CR_PAGE_SIZE_MASK (0xf << 8) +#define MCTL_CR_PAGE_SIZE(x) ((fls(x) - 4) << 8) +#define MCTL_CR_BUSW_MASK (7 << 12) +#define MCTL_CR_BUSW8 (0 << 12) +#define MCTL_CR_BUSW16 (1 << 12) +#define MCTL_CR_SEQUENCE (1 << 15) +#define MCTL_CR_DDR3 (3 << 16) +#define MCTL_CR_CHANNEL_MASK (1 << 19) +#define MCTL_CR_CHANNEL(x) (((x) - 1) << 19) +#define MCTL_CR_UNKNOWN (0x4 << 20) +#define MCTL_CR_CS1_CONTROL(x) ((x) << 24) + +/* DRAM control (sunxi_mctl_ctl_reg) register constants */ +#define MCTL_MR0 0x1c70 /* CL=11, WR=12 */ +#define MCTL_MR1 0x40 +#define MCTL_MR2 0x18 /* CWL=8 */ +#define MCTL_MR3 0x0 + +#endif /* _SUNXI_DRAM_SUN8I_A83T_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 7af5e295dc3..a2a9a38dbe7 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -158,6 +158,7 @@ enum sunxi_gpio_number { #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 #define SUN8I_A33_GPB_UART0 3 +#define SUN8I_A83T_GPB_UART0 2 #define SUNXI_GPC_NAND 2 #define SUNXI_GPC_SDC2 3 diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 2dd9d3bfecd..9d67847850f 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -74,6 +74,12 @@ config MACH_SUN8I_H3 select SUNXI_GEN_SUN6I select SUPPORT_SPL +config MACH_SUN8I_A83T + bool "sun8i (Allwinner A83T)" + select CPU_V7 + select SUNXI_GEN_SUN6I + select SUPPORT_SPL + config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 @@ -84,7 +90,7 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool - default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 + default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T config DRAM_CLK @@ -373,6 +379,7 @@ config AXP_GPIO config VIDEO boolean "Enable graphical uboot console on HDMI, LCD or VGA" + depends on !MACH_SUN8I_A83T default y ---help--- Say Y here to add support for using a cfb console on the HDMI, LCD diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 1f62de763aa..57acc20d03e 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -101,6 +101,11 @@ M: Priit Laes <plaes@plaes.org> S: Maintained F: configs/sunxi_Gemei_G9_defconfig +H8HOMLET PROTO A83T BOARD +M: VishnuPatekar <vishnupatekar0510@gmail.com> +S: Maintained +F: configs/h8_homlet_v2_defconfig + HUMMINGBIRD-A31 BOARD M: Chen-Yu Tsai <wens@csie.org> S: Maintained diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 6ac398c2dc1..386e2e04c21 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -430,26 +430,29 @@ void sunxi_board_init(void) int power_failed = 0; unsigned long ramsize; -#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER +#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ + defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER power_failed = axp_init(); -#ifdef CONFIG_AXP221_POWER +#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT); #endif power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); -#ifndef CONFIG_AXP209_POWER +#if !defined(CONFIG_AXP209_POWER) && !defined(CONFIG_AXP818_POWER) power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT); #endif -#ifdef CONFIG_AXP221_POWER +#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT); #endif #ifdef CONFIG_AXP221_POWER power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT); #endif +#ifndef CONFIG_AXP818_POWER power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT); -#ifndef CONFIG_AXP152_POWER +#endif +#if !defined(CONFIG_AXP152_POWER) && !defined(CONFIG_AXP818_POWER) power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT); #endif #ifdef CONFIG_AXP209_POWER diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 426ee79683d..af96f5bd121 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -13,5 +13,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index ebf961490fe..cba2cfdf3cd 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -15,5 +15,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 2d6736b789c..45cc5ab6db1 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -19,5 +19,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_SUNXI_NO_PMIC=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index ee07c614381..11691a2d09e 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -20,6 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 5008b013da3..b5181c6880a 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -14,5 +14,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index a26c3ff1d23..e27698d0dd7 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -12,5 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 41b2f8f6ebe..03481f62889 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -15,5 +15,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 5166c0616c7..f616388c8e7 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -14,5 +14,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 2ef21383d0e..67bea5ad465 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -18,5 +18,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 38126c86a01..82e01babc1e 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -20,5 +20,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig index 60a3fec2b78..8f1be3e5719 100644 --- a/configs/Auxtek-T003_defconfig +++ b/configs/Auxtek-T003_defconfig @@ -13,5 +13,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 1d44a74adc7..434b0076778 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -11,5 +11,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index f0c9d183b2b..6cbb76c5f75 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -14,5 +14,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" CONFIG_CMD_GPIO=y CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 08fca2f174b..40588b93268 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -16,5 +16,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" CONFIG_CMD_GPIO=y CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig index 4d76ae519df..78b2c511bfa 100644 --- a/configs/CHIP_defconfig +++ b/configs/CHIP_defconfig @@ -12,5 +12,4 @@ CONFIG_CMD_GPIO=y CONFIG_AXP_DCDC2_VOLT=1300 CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 280e70f8f11..e027a47d503 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -15,6 +15,5 @@ CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 2b2a2397972..dedf772fc64 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index e95deb16a06..feaeb9855ee 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -24,5 +24,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 7b407e79fa2..2f5e75d760e 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -12,5 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index ee5ab3d6589..a45fbb0a121 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -11,5 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 3fe3e2bb0cc..8cbaea68151 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -17,6 +17,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 5af42e0a9a0..83f20049073 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -16,5 +16,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 99ad34b8e59..45739cd81f5 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -19,5 +19,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index c98221f589f..d460c3270b6 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -13,5 +13,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUN # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index d10e7f4af80..ca3b1dd6adb 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -14,5 +14,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 81615bdfbe0..1f245e72f5d 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -12,5 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index d05b16616ca..7e2f942a31c 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -11,5 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index f04d6649867..32c65fba977 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -9,5 +9,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index a035159e7d7..73fd4e8cb15 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -14,4 +14,3 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 4ea1ff810db..11f32037c4d 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 5c5fabbbd0c..5689cff7a94 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -9,5 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index 0de98712874..61270987f2d 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -17,6 +17,5 @@ CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO4_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 467a2673a1e..93707e441b7 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -11,5 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index bed8afb42b4..bfe2a29feaa 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -17,5 +17,4 @@ CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO4_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 77de837be70..0ed5da1ba4e 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -15,5 +15,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index 6396ef80a69..fdb5ba4e498 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -14,5 +14,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index 067d9bd90cb..da762266525 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -17,5 +17,4 @@ CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO4_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index acd613b502e..1eb80940ec4 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -12,4 +12,3 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 501e6c665e6..80133599470 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -10,6 +10,5 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index 761bfab6b65..330ee47db20 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -16,5 +16,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index a52a483fcfb..4156c35bc5c 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -18,5 +18,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index d535dcc7ebc..20d3f93e85d 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -10,4 +10,3 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig index c83def8d46b..a5f8e6aec87 100644 --- a/configs/Sinovoip_BPI_M2_defconfig +++ b/configs/Sinovoip_BPI_M2_defconfig @@ -16,5 +16,4 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_ALDO2_VOLT=1800 CONFIG_AXP_DLDO1_VOLT=3000 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index 63ddf948288..dc71ddea901 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -25,5 +25,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y # CONFIG_REQUIRE_SERIAL_CONSOLE is not set -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index 3a007e19117..a01b4c12f41 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -17,6 +17,5 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index 18c6fae2fc8..c3ceedb9479 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -17,5 +17,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index da9fbb057ec..eb1b53151ec 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -11,5 +11,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index ff3bd0047c5..cdde2bc71f1 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -23,5 +23,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index caa942d66c7..ce4a58469b8 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -14,6 +14,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 67770d86d85..09ad33080a1 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -23,6 +23,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index f717acf7c2c..a8d339ced41 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -22,5 +22,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig new file mode 100644 index 00000000000..dc2809acb0e --- /dev/null +++ b/configs/h8_homlet_v2_defconfig @@ -0,0 +1,24 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A83T=y +CONFIG_DRAM_CLK=480 +CONFIG_DRAM_ZQ=15355 +CONFIG_DRAM_ODT_EN=y +#CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +#CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_AXP_GPIO=y +#CONFIG_USB_MUSB_HOST=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP_DCDC1_VOLT=3000 +CONFIG_AXP_DCDC2_VOLT=900 +CONFIG_AXP_DCDC3_VOLT=900 +CONFIG_AXP_DCDC4_VOLT=0 +CONFIG_AXP_DCDC5_VOLT=1500 +CONFIG_AXP_ALDO2_VOLT=0 +CONFIG_AXP_ALDO3_VOLT=0 +CONFIG_AXP_DLDO4_VOLT=0 diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index ad03341cfa0..a15a15ad4ba 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -12,5 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,MACPWR=SUNXI_GPH(21)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 4969411585c..3f1624c6215 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -18,5 +18,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index ab14ac7c386..6c4cd56ec6e 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -18,5 +18,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index 70f9e6ce2a0..00e1458fccb 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -17,5 +17,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index 43b12fd5e2f..1c682938df1 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -18,6 +18,5 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index c2347b817c3..a7b3a9fdca1 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -17,5 +17,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index 4bdd72e70d9..c0c6cb2f402 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -20,5 +20,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig index adbdd0a3e2b..0a17cf770c7 100644 --- a/configs/inet9f_rev03_defconfig +++ b/configs/inet9f_rev03_defconfig @@ -17,5 +17,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 0e140f95191..443a1c72aee 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -12,6 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,MACPWR=SUNXI_GPH(19)" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 249f5557df5..07865d896b2 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -15,5 +15,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index ca3bcdf9bb4..03e58cddda5 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -12,5 +12,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 0cb46bbf3c0..922f8c3b503 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -11,5 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_SUNXI_NO_PMIC=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index f97f893aea9..2a359beed8d 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -8,5 +8,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig index 61f35d3b3f1..75afca90e0f 100644 --- a/configs/orangepi_pc_defconfig +++ b/configs/orangepi_pc_defconfig @@ -12,4 +12,3 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index cce48172c62..003a9c6c03c 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -12,4 +12,3 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig index 83a7b461641..d9b3b45adf9 100644 --- a/configs/pov_protab2_ips9_defconfig +++ b/configs/pov_protab2_ips9_defconfig @@ -18,5 +18,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig index 36d806e3878..205359efb5d 100644 --- a/configs/q8_a13_tablet_defconfig +++ b/configs/q8_a13_tablet_defconfig @@ -20,5 +20,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index 42cce87517e..927ab2af369 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -22,5 +22,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index bd59bb39e43..755f4ee08c2 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -22,5 +22,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index 729d4e828fa..a8dfa0d0239 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -22,5 +22,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO1_VOLT=3300 -CONFIG_SYS_NS16550=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 2d414258804..d6387fc7a0f 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -11,5 +11,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_AXP152_POWER=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index 6315ad029ed..d3de194ea0e 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -15,5 +15,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y -CONFIG_SYS_NS16550=y CONFIG_USB_EHCI_HCD=y diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1936e5f1fce..e86dd72c14f 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -9,6 +9,7 @@ choice depends on ARCH_SUNXI default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 + default AXP818_POWER if MACH_SUN8I_A83T default SUNXI_NO_PMIC if MACH_SUN8I_H3 config SUNXI_NO_PMIC @@ -37,22 +38,32 @@ config AXP221_POWER Select this to enable support for the axp221/axp223 pmic found on most A23 and A31 boards. +config AXP818_POWER + boolean "axp818 pmic support" + depends on MACH_SUN8I_A83T + ---help--- + Say y here to enable support for the axp818 pmic found on + A83T dev board. + endchoice config AXP_DCDC1_VOLT int "axp pmic dcdc1 voltage" - depends on AXP221_POWER + depends on AXP221_POWER || AXP818_POWER + default 3300 if AXP818_POWER default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for generic 3.3V IO voltage for external devices like the lcd-panal and sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to - safe battery. On A31 devices dcdc1 is also used for VCC-IO. + safe battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T + dcdc1 is used for VCC-IO, nand, usb0, sd , etc. config AXP_DCDC2_VOLT int "axp pmic dcdc2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + default 900 if AXP818_POWER default 1400 if AXP152_POWER || AXP209_POWER default 1200 if MACH_SUN6I default 1100 if MACH_SUN8I @@ -62,10 +73,12 @@ config AXP_DCDC2_VOLT On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V. On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V. On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V. + On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V. config AXP_DCDC3_VOLT int "axp pmic dcdc3 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + default 900 if AXP818_POWER default 1500 if AXP152_POWER default 1250 if AXP209_POWER default 1200 if MACH_SUN6I || MACH_SUN8I @@ -76,10 +89,11 @@ config AXP_DCDC3_VOLT should be 1.25V. On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V. On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V. + On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V. config AXP_DCDC4_VOLT int "axp pmic dcdc4 voltage" - depends on AXP152_POWER || AXP221_POWER + depends on AXP152_POWER || AXP221_POWER || AXP818_POWER default 1250 if AXP152_POWER default 1200 if MACH_SUN6I default 0 if MACH_SUN8I @@ -89,15 +103,18 @@ config AXP_DCDC4_VOLT On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V. On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V. On A23 / A33 boards dcdc4 is unused and should be disabled. + On A83T boards dcdc4 is used for VDD-GPU. config AXP_DCDC5_VOLT int "axp pmic dcdc5 voltage" - depends on AXP221_POWER + depends on AXP221_POWER || AXP818_POWER + default 1800 if AXP818_POWER default 1500 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to disable dcdc5. - On A23 / A31 / A33 boards dcdc5 is VCC-DRAM and should be 1.5V. + On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V, + 1.8V for A83T. config AXP_ALDO1_VOLT int "axp pmic (a)ldo1 voltage" @@ -112,7 +129,7 @@ config AXP_ALDO1_VOLT config AXP_ALDO2_VOLT int "axp pmic (a)ldo2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER default 3000 if AXP152_POWER || AXP209_POWER default 0 if MACH_SUN6I default 2500 if MACH_SUN8I @@ -126,14 +143,15 @@ config AXP_ALDO2_VOLT config AXP_ALDO3_VOLT int "axp pmic (a)ldo3 voltage" - depends on AXP209_POWER || AXP221_POWER - default 0 if AXP209_POWER + depends on AXP209_POWER || AXP221_POWER || AXP818_POWER + default 0 if AXP209_POWER || AXP818_POWER default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to disable aldo3. On A10(s) / A13 / A20 boards aldo3 should be 2.8V. On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V. + On A83T aldo3 is used for LVDS, DSI, MIPI, HDMI, etc. config AXP_ALDO4_VOLT int "axp pmic (a)ldo4 voltage" @@ -172,7 +190,7 @@ config AXP_DLDO3_VOLT config AXP_DLDO4_VOLT int "axp pmic dldo4 voltage" - depends on AXP221_POWER + depends on AXP221_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to diff --git a/drivers/power/Makefile b/drivers/power/Makefile index a2d3c047db8..0fdbca3c35e 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_AS3722_POWER) += as3722.o obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP221_POWER) += axp221.o +obj-$(CONFIG_AXP818_POWER) += axp818.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o diff --git a/drivers/power/axp818.c b/drivers/power/axp818.c new file mode 100644 index 00000000000..4b21a838798 --- /dev/null +++ b/drivers/power/axp818.c @@ -0,0 +1,132 @@ +/* + * AXP818 driver based on AXP221 driver + * + * + * (C) Copyright 2015 Vishnu Patekar <vishnuptekar0510@gmail.com> + * + * Based on axp221.c + * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pmic_bus.h> +#include <axp_pmic.h> + +static u8 axp818_mvolt_to_cfg(int mvolt, int min, int max, int div) +{ + if (mvolt < min) + mvolt = min; + else if (mvolt > max) + mvolt = max; + + return (mvolt - min) / div; +} + +int axp_set_dcdc1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp818_mvolt_to_cfg(mvolt, 1600, 3400, 100); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC1_EN); + + ret = pmic_bus_write(AXP818_DCDC1_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC1_EN); +} + +int axp_set_dcdc2(unsigned int mvolt) +{ + int ret; + u8 cfg; + + if (mvolt >= 1220) + cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20); + else + cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC2_EN); + + ret = pmic_bus_write(AXP818_DCDC2_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC2_EN); +} + +int axp_set_dcdc3(unsigned int mvolt) +{ + int ret; + u8 cfg; + + if (mvolt >= 1220) + cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20); + else + cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC3_EN); + + ret = pmic_bus_write(AXP818_DCDC3_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC3_EN); +} + +int axp_set_dcdc5(unsigned int mvolt) +{ + int ret; + u8 cfg; + + if (mvolt >= 1140) + cfg = 32 + axp818_mvolt_to_cfg(mvolt, 1140, 1840, 20); + else + cfg = axp818_mvolt_to_cfg(mvolt, 800, 1120, 10); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC5_EN); + + ret = pmic_bus_write(AXP818_DCDC5_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP818_OUTPUT_CTRL1, + AXP818_OUTPUT_CTRL1_DCDC5_EN); +} + +int axp_init(void) +{ + u8 axp_chip_id; + int ret; + + ret = pmic_bus_init(); + if (ret) + return ret; + + ret = pmic_bus_read(AXP818_CHIP_ID, &axp_chip_id); + if (ret) + return ret; + + if (!(axp_chip_id == 0x51)) + return -ENODEV; + else + return ret; + + return 0; +} diff --git a/include/axp818.h b/include/axp818.h new file mode 100644 index 00000000000..1dc6456950b --- /dev/null +++ b/include/axp818.h @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * X-Powers AXP818 Power Management IC driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define AXP818_CHIP_ID 0x03 + +#define AXP818_OUTPUT_CTRL1 0x10 +#define AXP818_OUTPUT_CTRL1_DCDC1_EN (1 << 0) +#define AXP818_OUTPUT_CTRL1_DCDC2_EN (1 << 1) +#define AXP818_OUTPUT_CTRL1_DCDC3_EN (1 << 2) +#define AXP818_OUTPUT_CTRL1_DCDC4_EN (1 << 3) +#define AXP818_OUTPUT_CTRL1_DCDC5_EN (1 << 4) +#define AXP818_OUTPUT_CTRL1_DCDC6_EN (1 << 5) +#define AXP818_OUTPUT_CTRL1_DCDC7_EN (1 << 6) +#define AXP818_OUTPUT_CTRL2 0x12 +#define AXP818_OUTPUT_CTRL2_ELDO1_EN (1 << 0) +#define AXP818_OUTPUT_CTRL2_ELDO2_EN (1 << 1) +#define AXP818_OUTPUT_CTRL2_ELDO3_EN (1 << 2) +#define AXP818_OUTPUT_CTRL2_DLDO1_EN (1 << 3) +#define AXP818_OUTPUT_CTRL2_DLDO2_EN (1 << 4) +#define AXP818_OUTPUT_CTRL2_DLDO3_EN (1 << 5) +#define AXP818_OUTPUT_CTRL2_DLDO4_EN (1 << 6) +#define AXP818_OUTPUT_CTRL3 0x13 +#define AXP818_OUTPUT_CTRL3_FLDO1_EN (1 << 2) +#define AXP818_OUTPUT_CTRL3_FLDO2_EN (1 << 3) +#define AXP818_OUTPUT_CTRL3_FLDO3_EN (1 << 4) +#define AXP818_OUTPUT_CTRL3_ALDO1_EN (1 << 5) +#define AXP818_OUTPUT_CTRL3_ALDO2_EN (1 << 6) +#define AXP818_OUTPUT_CTRL3_ALDO3_EN (1 << 7) + +#define AXP818_DCDC1_CTRL 0x20 +#define AXP818_DCDC2_CTRL 0x21 +#define AXP818_DCDC3_CTRL 0x22 +#define AXP818_DCDC4_CTRL 0x23 +#define AXP818_DCDC5_CTRL 0x24 +#define AXP818_DCDC6_CTRL 0x25 + +#define AXP818_DLDO1_CTRL 0x15 +#define AXP818_DLDO2_CTRL 0x16 +#define AXP818_DLDO3_CTRL 0x17 +#define AXP818_DLDO4_CTRL 0x18 +#define AXP818_ELDO1_CTRL 0x19 +#define AXP818_ELDO2_CTRL 0x1a +#define AXP818_ELDO3_CTRL 0x1b +#define AXP818_ELDO3_CTRL 0x1b +#define AXP818_FLDO1_CTRL 0x1c +#define AXP818_FLDO2_3_CTRL 0x1d +#define AXP818_DCDC1_CTRL 0x20 +#define AXP818_DCDC2_CTRL 0x21 +#define AXP818_DCDC3_CTRL 0x22 +#define AXP818_DCDC4_CTRL 0x23 +#define AXP818_DCDC5_CTRL 0x24 +#define AXP818_DCDC6_CTRL 0x25 +#define AXP818_DCDC7_CTRL 0x26 + +#define AXP818_ALDO1_CTRL 0x28 +#define AXP818_ALDO2_CTRL 0x29 +#define AXP818_ALDO3_CTRL 0x2a + +int axp818_init(void); + +/* For axp_gpio.c */ +#define AXP_POWER_STATUS 0x00 +#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_GPIO0_CTRL 0x90 +#define AXP_GPIO1_CTRL 0x92 +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_STATE 0x94 +#define AXP_GPIO_STATE_OFFSET 0 diff --git a/include/axp_pmic.h b/include/axp_pmic.h index ef339c47856..3b01c49cc93 100644 --- a/include/axp_pmic.h +++ b/include/axp_pmic.h @@ -16,6 +16,9 @@ #ifdef CONFIG_AXP221_POWER #include <axp221.h> #endif +#ifdef CONFIG_AXP818_POWER +#include <axp818.h> +#endif int axp_set_dcdc1(unsigned int mvolt); int axp_set_dcdc2(unsigned int mvolt); diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 113e320f06c..781ff6eae21 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -20,6 +20,8 @@ #define CONFIG_SUNXI_USB_PHYS 2 + +#ifndef CONFIG_MACH_SUN8I_A83T #define CONFIG_ARMV7_PSCI 1 #if defined(CONFIG_MACH_SUN8I_A23) #define CONFIG_ARMV7_PSCI_NR_CPUS 2 @@ -30,6 +32,8 @@ #else #error Unsupported sun8i variant #endif +#endif + #define CONFIG_TIMER_CLK_FREQ 24000000 /* diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 98a2c7478b3..da6ab61d1bc 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -239,7 +239,8 @@ extern int soft_i2c_gpio_scl; #endif /* PMU */ -#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER +#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ + defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER #define CONFIG_SPL_POWER_SUPPORT #endif |