summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJagan Teki <jagan@openedev.com>2017-01-02 23:29:04 +0100
committerJagan Teki <jagan@openedev.com>2017-01-15 18:29:04 +0100
commit68e7999ba9de0a15dd3dc99e078b70f41eb98c82 (patch)
tree7ca3153ad4ae92019aa3992daa4cbcdd75eafa81
parentee86e0d2fe071aac37f6a02e924841f981b24121 (diff)
spi: Zap cf_qspi driver and related code
Dropped becuase - driver not used any board. - no dm conversion. Cc: Angelo Dureghello <angelo@sysam.it> Cc: Richard Retanubun <richardretanubun@ruggedcom.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Acked-by: Angelo Dureghello <angelo@sysam.it>
-rw-r--r--arch/m68k/cpu/mcf52x2/cpu_init.c12
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/cf_qspi.c354
-rw-r--r--drivers/spi/cf_spi.c4
-rw-r--r--scripts/config_whitelist.txt1
5 files changed, 0 insertions, 372 deletions
diff --git a/arch/m68k/cpu/mcf52x2/cpu_init.c b/arch/m68k/cpu/mcf52x2/cpu_init.c
index edcb092fec..7b66720372 100644
--- a/arch/m68k/cpu/mcf52x2/cpu_init.c
+++ b/arch/m68k/cpu/mcf52x2/cpu_init.c
@@ -318,18 +318,6 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
}
#endif /* CONFIG_CMD_NET */
-#if defined(CONFIG_CF_QSPI)
-
-/* Configure PIOs for SIN, SOUT, and SCK */
-void cfspi_port_conf(void)
-{
- mbar_writeByte(MCF_GPIO_PAR_QSPI,
- MCF_GPIO_PAR_QSPI_SIN_SIN |
- MCF_GPIO_PAR_QSPI_SOUT_SOUT |
- MCF_GPIO_PAR_QSPI_SCK_SCK);
-}
-#endif /* CONFIG_CF_QSPI */
-
#endif /* CONFIG_M5271 */
#if defined(CONFIG_M5272)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 521911bb8e..896b093765 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_BFIN_SPI) += bfin_spi.o
obj-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o
obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
obj-$(CONFIG_CF_SPI) += cf_spi.o
-obj-$(CONFIG_CF_QSPI) += cf_qspi.o
obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
diff --git a/drivers/spi/cf_qspi.c b/drivers/spi/cf_qspi.c
deleted file mode 100644
index e57e63eb47..0000000000
--- a/drivers/spi/cf_qspi.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * Freescale Coldfire Queued SPI driver
- *
- * NOTE:
- * This driver is written to transfer 8 bit at-a-time and uses the dedicated
- * SPI slave select pins as bit-banged GPIO to work with spi_flash subsystem.
- *
- * Copyright (C) 2011 Ruggedcom, Inc.
- * Richard Retanubun (richardretanubun@freescale.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, slave)
-
-struct cf_qspi_slave {
- struct spi_slave slave; /* Specific bus:cs ID for each device */
- qspi_t *regs; /* Pointer to SPI controller registers */
- u16 qmr; /* QMR: Queued Mode Register */
- u16 qwr; /* QWR: Queued Wrap Register */
- u16 qcr; /* QCR: Queued Command Ram */
-};
-
-/* Register write wrapper functions */
-static void write_qmr(volatile qspi_t *qspi, u16 val) { qspi->mr = val; }
-static void write_qdlyr(volatile qspi_t *qspi, u16 val) { qspi->dlyr = val; }
-static void write_qwr(volatile qspi_t *qspi, u16 val) { qspi->wr = val; }
-static void write_qir(volatile qspi_t *qspi, u16 val) { qspi->ir = val; }
-static void write_qar(volatile qspi_t *qspi, u16 val) { qspi->ar = val; }
-static void write_qdr(volatile qspi_t *qspi, u16 val) { qspi->dr = val; }
-/* Register read wrapper functions */
-static u16 read_qdlyr(volatile qspi_t *qspi) { return qspi->dlyr; }
-static u16 read_qwr(volatile qspi_t *qspi) { return qspi->wr; }
-static u16 read_qir(volatile qspi_t *qspi) { return qspi->ir; }
-static u16 read_qdr(volatile qspi_t *qspi) { return qspi->dr; }
-
-/* These call points may be different for each ColdFire CPU */
-extern void cfspi_port_conf(void);
-static void cfspi_cs_activate(uint bus, uint cs, uint cs_active_high);
-static void cfspi_cs_deactivate(uint bus, uint cs, uint cs_active_high);
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- return 0;
-}
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-__attribute__((weak))
-void spi_init(void)
-{
- cfspi_port_conf();
-}
-
-__attribute__((weak))
-void spi_cs_activate(struct spi_slave *slave)
-{
- struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
-
- cfspi_cs_activate(slave->bus, slave->cs, !(dev->qwr & QSPI_QWR_CSIV));
-}
-
-__attribute__((weak))
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
-
- cfspi_cs_deactivate(slave->bus, slave->cs, !(dev->qwr & QSPI_QWR_CSIV));
-}
-
-__attribute__((weak))
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- /* Only 1 bus and 4 chipselect per controller */
- if (bus == 0 && (cs >= 0 && cs < 4))
- return 1;
- else
- return 0;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
-
- free(dev);
-}
-
-/* Translate information given by spi_setup_slave to members of cf_qspi_slave */
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct cf_qspi_slave *dev = NULL;
-
- if (!spi_cs_is_valid(bus, cs))
- return NULL;
-
- dev = spi_alloc_slave(struct cf_qspi_slave, bus, cs);
- if (!dev)
- return NULL;
-
- /* Initialize to known value */
- dev->regs = (qspi_t *)MMAP_QSPI;
- dev->qmr = 0;
- dev->qwr = 0;
- dev->qcr = 0;
-
-
- /* Map max_hz to QMR[BAUD] */
- if (max_hz == 0) /* Go as fast as possible */
- dev->qmr = 2u;
- else /* Get the closest baud rate */
- dev->qmr = clamp(((gd->bus_clk >> 2) + max_hz - 1)/max_hz,
- 2lu, 255lu);
-
- /* Map mode to QMR[CPOL] and QMR[CPHA] */
- if (mode & SPI_CPOL)
- dev->qmr |= QSPI_QMR_CPOL;
-
- if (mode & SPI_CPHA)
- dev->qmr |= QSPI_QMR_CPHA;
-
- /* Hardcode bit length to 8 bit per transter */
- dev->qmr |= QSPI_QMR_BITS_8;
-
- /* Set QMR[MSTR] to enable QSPI as master */
- dev->qmr |= QSPI_QMR_MSTR;
-
- /*
- * Set QCR and QWR to default values for spi flash operation.
- * If more custom QCR and QRW are needed, overload mode variable
- */
- dev->qcr = (QSPI_QDR_CONT | QSPI_QDR_BITSE);
-
- if (!(mode & SPI_CS_HIGH))
- dev->qwr |= QSPI_QWR_CSIV;
-
- return &dev->slave;
-}
-
-/* Transfer 8 bit at a time */
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
-{
- struct cf_qspi_slave *dev = to_cf_qspi_slave(slave);
- volatile qspi_t *qspi = dev->regs;
- u8 *txbuf = (u8 *)dout;
- u8 *rxbuf = (u8 *)din;
- u32 count = DIV_ROUND_UP(bitlen, 8);
- u32 n, i = 0;
-
- /* Sanitize arguments */
- if (slave == NULL) {
- printf("%s: NULL slave ptr\n", __func__);
- return -1;
- }
-
- if (flags & SPI_XFER_BEGIN)
- spi_cs_activate(slave);
-
- /* There is something to send, lets process it. spi_xfer is also called
- * just to toggle chip select, so bitlen of 0 is valid */
- if (count > 0) {
- /*
- * NOTE: Since chip select is driven as a bit-bang-ed GPIO
- * using spi_cs_activate() and spi_cs_deactivate(),
- * the chip select settings inside the controller
- * (i.e. QCR[CONT] and QWR[CSIV]) are moot. The bits are set to
- * keep the controller settings consistent with the actual
- * operation of the bus.
- */
-
- /* Write the slave device's settings for the controller.*/
- write_qmr(qspi, dev->qmr);
- write_qwr(qspi, dev->qwr);
-
- /* Limit transfer to 16 at a time */
- n = min(count, 16u);
- do {
- /* Setup queue end point */
- write_qwr(qspi, ((read_qwr(qspi) & QSPI_QWR_ENDQP_MASK)
- | QSPI_QWR_ENDQP((n-1))));
-
- /* Write Command RAM */
- write_qar(qspi, QSPI_QAR_CMD);
- for (i = 0; i < n; ++i)
- write_qdr(qspi, dev->qcr);
-
- /* Write TxBuf, if none given, fill with ZEROes */
- write_qar(qspi, QSPI_QAR_TRANS);
- if (txbuf) {
- for (i = 0; i < n; ++i)
- write_qdr(qspi, *txbuf++);
- } else {
- for (i = 0; i < n; ++i)
- write_qdr(qspi, 0);
- }
-
- /* Clear QIR[SPIF] by writing a 1 to it */
- write_qir(qspi, read_qir(qspi) | QSPI_QIR_SPIF);
- /* Set QDLYR[SPE] to start sending */
- write_qdlyr(qspi, read_qdlyr(qspi) | QSPI_QDLYR_SPE);
-
- /* Poll QIR[SPIF] for transfer completion */
- while ((read_qir(qspi) & QSPI_QIR_SPIF) != 1)
- udelay(1);
-
- /* If given read RxBuf, load data to it */
- if (rxbuf) {
- write_qar(qspi, QSPI_QAR_RECV);
- for (i = 0; i < n; ++i)
- *rxbuf++ = read_qdr(qspi);
- }
-
- /* Decrement count */
- count -= n;
- } while (count);
- }
-
- if (flags & SPI_XFER_END)
- spi_cs_deactivate(slave);
-
- return 0;
-}
-
-/* Each MCF CPU may have different pin assignments for chip selects. */
-#if defined(CONFIG_M5271)
-/* Assert chip select, val = [1|0] , dir = out, mode = GPIO */
-void cfspi_cs_activate(uint bus, uint cs, uint cs_active_high)
-{
- debug("%s: bus %d cs %d cs_active_high %d\n",
- __func__, bus, cs, cs_active_high);
-
- switch (cs) {
- case 0: /* QSPI_CS[0] = PQSPI[3] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x08);
- else
- mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xF7);
-
- mbar_writeByte(MCF_GPIO_PDDR_QSPI,
- mbar_readByte(MCF_GPIO_PDDR_QSPI) | 0x08);
-
- mbar_writeByte(MCF_GPIO_PAR_QSPI,
- mbar_readByte(MCF_GPIO_PAR_QSPI) & 0xDF);
- break;
- case 1: /* QSPI_CS[1] = PQSPI[4] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x10);
- else
- mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xEF);
-
- mbar_writeByte(MCF_GPIO_PDDR_QSPI,
- mbar_readByte(MCF_GPIO_PDDR_QSPI) | 0x10);
-
- mbar_writeByte(MCF_GPIO_PAR_QSPI,
- mbar_readByte(MCF_GPIO_PAR_QSPI) & 0x3F);
- break;
- case 2: /* QSPI_CS[2] = PTIMER[7] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x80);
- else
- mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0x7F);
-
- mbar_writeByte(MCF_GPIO_PDDR_TIMER,
- mbar_readByte(MCF_GPIO_PDDR_TIMER) | 0x80);
-
- mbar_writeShort(MCF_GPIO_PAR_TIMER,
- mbar_readShort(MCF_GPIO_PAR_TIMER) & 0x3FFF);
- break;
- case 3: /* QSPI_CS[3] = PTIMER[3] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x08);
- else
- mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0xF7);
-
- mbar_writeByte(MCF_GPIO_PDDR_TIMER,
- mbar_readByte(MCF_GPIO_PDDR_TIMER) | 0x08);
-
- mbar_writeShort(MCF_GPIO_PAR_TIMER,
- mbar_readShort(MCF_GPIO_PAR_TIMER) & 0xFF3F);
- break;
- }
-}
-
-/* Deassert chip select, val = [1|0], dir = in, mode = GPIO
- * direction set as IN to undrive the pin, external pullup/pulldown will bring
- * bus to deassert state.
- */
-void cfspi_cs_deactivate(uint bus, uint cs, uint cs_active_high)
-{
- debug("%s: bus %d cs %d cs_active_high %d\n",
- __func__, bus, cs, cs_active_high);
-
- switch (cs) {
- case 0: /* QSPI_CS[0] = PQSPI[3] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xF7);
- else
- mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x08);
-
- mbar_writeByte(MCF_GPIO_PDDR_QSPI,
- mbar_readByte(MCF_GPIO_PDDR_QSPI) & 0xF7);
-
- mbar_writeByte(MCF_GPIO_PAR_QSPI,
- mbar_readByte(MCF_GPIO_PAR_QSPI) & 0xDF);
- break;
- case 1: /* QSPI_CS[1] = PQSPI[4] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PCLRR_QSPI, 0xEF);
- else
- mbar_writeByte(MCF_GPIO_PPDSDR_QSPI, 0x10);
-
- mbar_writeByte(MCF_GPIO_PDDR_QSPI,
- mbar_readByte(MCF_GPIO_PDDR_QSPI) & 0xEF);
-
- mbar_writeByte(MCF_GPIO_PAR_QSPI,
- mbar_readByte(MCF_GPIO_PAR_QSPI) & 0x3F);
- break;
- case 2: /* QSPI_CS[2] = PTIMER[7] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0x7F);
- else
- mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x80);
-
- mbar_writeByte(MCF_GPIO_PDDR_TIMER,
- mbar_readByte(MCF_GPIO_PDDR_TIMER) & 0x7F);
-
- mbar_writeShort(MCF_GPIO_PAR_TIMER,
- mbar_readShort(MCF_GPIO_PAR_TIMER) & 0x3FFF);
- break;
- case 3: /* QSPI_CS[3] = PTIMER[3] */
- if (cs_active_high)
- mbar_writeByte(MCF_GPIO_PCLRR_TIMER, 0xF7);
- else
- mbar_writeByte(MCF_GPIO_PPDSDR_TIMER, 0x08);
-
- mbar_writeByte(MCF_GPIO_PDDR_TIMER,
- mbar_readByte(MCF_GPIO_PDDR_TIMER) & 0xF7);
-
- mbar_writeShort(MCF_GPIO_PAR_TIMER,
- mbar_readShort(MCF_GPIO_PAR_TIMER) & 0xFF3F);
- break;
- }
-}
-#endif /* CONFIG_M5271 */
diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c
index 6ce11012e8..7be9427781 100644
--- a/drivers/spi/cf_spi.c
+++ b/drivers/spi/cf_spi.c
@@ -279,10 +279,6 @@ static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
}
#endif /* CONFIG_CF_DSPI */
-#ifdef CONFIG_CF_QSPI
-/* 52xx, 53xx */
-#endif /* CONFIG_CF_QSPI */
-
#ifdef CONFIG_CMD_SPI
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 79111e0199..51903fdfb3 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -479,7 +479,6 @@ CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
CONFIG_CF_ATASEL_DIS
CONFIG_CF_ATASEL_ENA
CONFIG_CF_DSPI
-CONFIG_CF_QSPI
CONFIG_CF_SBF
CONFIG_CF_SPI
CONFIG_CF_V2