Duplicate code

There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

1 files changed, 0 insertions, 643 deletions

diff --git a/board/freescale/m5329evb/flash.c b/board/freescale/m5329evb/flash.c
deleted file mode 100644
index 7d3b0e84d22..00000000000
--- a/board/freescale/m5329evb/flash.c
+++ /dev/null
@@ -1,643 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifndef CFG_FLASH_CFI
-
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define PHYS_FLASH_1 CFG_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-#define FPW             FLASH_PORT_WIDTH
-#define FPWV            FLASH_PORT_WIDTHV
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM   0x00100010
-#define INTEL_ERASE     0x00200020
-#define INTEL_WRSETUP	0x00400040
-#define INTEL_CLEAR     0x00500050
-#define INTEL_LOCKBIT   0x00600060
-#define INTEL_PROTECT   0x00010001
-#define INTEL_STATUS    0x00700070
-#define INTEL_READID    0x00900090
-#define INTEL_CFIQRY	0x00980098
-#define INTEL_SUSERASE	0x00B000B0
-#define INTEL_PROTPROG	0x00C000C0
-#define INTEL_CONFIRM   0x00D000D0
-#define INTEL_RESET     0x00FF00FF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED  0x00800080
-#define INTEL_OK        0x00800080
-#define INTEL_ERASESUS  0x00600060
-#define INTEL_WSM_SUS   (INTEL_FINISHED | INTEL_ERASESUS)
-
-/* 28F160C3B CFI Data offset - This could vary */
-#define INTEL_CFI_MFG	0x00	/* Manufacturer ID */
-#define INTEL_CFI_PART	0x01	/* Product ID */
-#define INTEL_CFI_LOCK  0x02	/* */
-#define INTEL_CFI_TWPRG 0x1F	/* Typical Single Word Program Timeout 2^n us */
-#define INTEL_CFI_MBUFW 0x20	/* Typical Max Buffer Write Timeout 2^n us */
-#define INTEL_CFI_TERB	0x21	/* Typical Block Erase Timeout 2^n ms */
-#define INTEL_CFI_MWPRG 0x23	/* Maximum Word program timeout 2^n us */
-#define INTEL_CFI_MERB  0x25	/* Maximum Block Erase Timeout 2^n s */
-#define INTEL_CFI_SIZE	0x27	/* Device size 2^n bytes */
-#define INTEL_CFI_BANK	0x2C	/* Number of Bank */
-#define INTEL_CFI_SZ1A	0x2F	/* Block Region Size */
-#define INTEL_CFI_SZ1B	0x30
-#define INTEL_CFI_SZ2A	0x33
-#define INTEL_CFI_SZ2B	0x34
-#define INTEL_CFI_BLK1	0x2D	/* Number of Blocks */
-#define INTEL_CFI_BLK2	0x31
-
-#define WR_BLOCK        0x20
-
-#define SYNC			__asm__("nop")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-ulong flash_get_size(FPWV * addr, flash_info_t * info);
-int flash_get_offsets(ulong base, flash_info_t * info);
-int flash_cmd_rd(FPWV * addr, int index);
-int write_data(flash_info_t * info, ulong dest, FPW data);
-void flash_sync_real_protect(flash_info_t * info);
-uchar intel_sector_protected(flash_info_t * info, ushort sector);
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-ulong flash_init(void)
-{
-	FPWV *flash_addr[CFG_MAX_FLASH_BANKS];
-	ulong size;
-	int i;
-
-	flash_addr[0] = (FPW *) CFG_FLASH0_BASE;
-#ifdef CFG_FLASH1_BASE
-	flash_addr[1] = (FPW *) CFG_FLASH1_BASE;
-#endif
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		memset(&flash_info[i], 0, sizeof(flash_info_t));
-
-		size = flash_get_size(flash_addr[i], &flash_info[i]);
-		flash_protect(FLAG_PROTECT_CLEAR,
-			      flash_info[i].start[0],
-			      flash_info[i].start[0] + size - 1,
-			      &flash_info[0]);
-		/* get the h/w and s/w protection status in sync */
-		flash_sync_real_protect(&flash_info[i]);
-	}
-
-	/* Protect monitor and environment sectors */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-
-	return size;
-}
-
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf("INTEL ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F160C3B:
-		printf("28F160C3B\n");
-		break;
-	case FLASH_28F160C3T:
-		printf("28F160C3T\n");
-		break;
-	case FLASH_28F320C3B:
-		printf("28F320C3B\n");
-		break;
-	case FLASH_28F320C3T:
-		printf("28F320C3T\n");
-		break;
-	case FLASH_28F640C3B:
-		printf("28F640C3B\n");
-		break;
-	case FLASH_28F640C3T:
-		printf("28F640C3T\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		return;
-	}
-
-	if (info->size > 0x100000) {
-		int remainder;
-
-		printf("  Size: %ld", info->size >> 20);
-
-		remainder = (info->size % 0x100000);
-		if (remainder) {
-			remainder >>= 10;
-			remainder = (int)((float)
-					  (((float)remainder / (float)1024) *
-					   10000));
-			printf(".%d ", remainder);
-		}
-
-		printf("MB in %d Sectors\n", info->sector_count);
-	} else
-		printf("  Size: %ld KB in %d Sectors\n",
-		       info->size >> 10, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s",
-		       info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size(FPWV * addr, flash_info_t * info)
-{
-	int intel = 0;
-	u16 value;
-	static int bank = 0;
-
-	/* Write auto select command: read Manufacturer ID */
-	/* Write auto select command sequence and test FLASH answer */
-	*addr = (FPW) INTEL_RESET;	/* restore read mode */
-	*addr = (FPW) INTEL_READID;
-
-	switch (addr[INTEL_CFI_MFG] & 0xff) {
-	case (ushort) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		value = addr[INTEL_CFI_PART];
-		intel = 1;
-		break;
-	default:
-		printf("Unknown Flash\n");
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		*addr = (FPW) INTEL_RESET;	/* restore read mode */
-		return (0);	/* no or unknown flash  */
-	}
-
-	switch (value) {
-	case (u16) INTEL_ID_28F160C3B:
-		info->flash_id += FLASH_28F160C3B;
-		break;
-	case (u16) INTEL_ID_28F160C3T:
-		info->flash_id += FLASH_28F160C3T;
-		break;
-	case (u16) INTEL_ID_28F320C3B:
-		info->flash_id += FLASH_28F320C3B;
-		break;
-	case (u16) INTEL_ID_28F320C3T:
-		info->flash_id += FLASH_28F320C3T;
-		break;
-	case (u16) INTEL_ID_28F640C3B:
-		info->flash_id += FLASH_28F640C3B;
-		break;
-	case (u16) INTEL_ID_28F640C3T:
-		info->flash_id += FLASH_28F640C3T;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (intel) {
-		/* Intel spec. under CFI section */
-		u32 sz, size, offset;
-		int sec, sectors, bs;
-		int part, i, j, cnt;
-
-		part = flash_cmd_rd(addr, INTEL_CFI_BANK);
-
-		/* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec.
-		 * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count
-		 * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count
-		 */
-		offset = (u32) addr;
-		sectors = sec = 0;
-		size = sz = cnt = 0;
-		for (i = 0; i < part; i++) {
-			bs = (((addr[INTEL_CFI_SZ1B + i * 4] << 8) |
-			       addr[INTEL_CFI_SZ1A + i * 4]) * 0x100);
-			sec = addr[INTEL_CFI_BLK1 + i * 4] + 1;
-			sz = bs * sec;
-
-			for (j = 0; j < sec; j++) {
-				info->start[cnt++] = offset;
-				offset += bs;
-			}
-
-			sectors += sec;
-			size += sz;
-		}
-		info->sector_count = sectors;
-		info->size = size;
-	}
-
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
-		printf("** ERROR: sector count %d > max (%d) **\n",
-		       info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
-	}
-
-	*addr = (FPW) INTEL_RESET;	/* restore read mode */
-
-	return (info->size);
-}
-
-int flash_cmd_rd(FPWV * addr, int index)
-{
-	return (int)addr[index];
-}
-
-/*
- * This function gets the u-boot flash sector protection status
- * (flash_info_t.protect[]) in sync with the sector protection
- * status stored in hardware.
- */
-void flash_sync_real_protect(flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		for (i = 0; i < info->sector_count; ++i) {
-			info->protect[i] = intel_sector_protected(info, i);
-		}
-		break;
-	default:
-		/* no h/w protect support */
-		break;
-	}
-}
-
-/*
- * checks if "sector" in bank "info" is protected. Should work on intel
- * strata flash chips 28FxxxJ3x in 8-bit mode.
- * Returns 1 if sector is protected (or timed-out while trying to read
- * protection status), 0 if it is not.
- */
-uchar intel_sector_protected(flash_info_t * info, ushort sector)
-{
-	FPWV *addr;
-	FPWV *lock_conf_addr;
-	ulong start;
-	unsigned char ret;
-
-	/*
-	 * first, wait for the WSM to be finished. The rationale for
-	 * waiting for the WSM to become idle for at most
-	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
-	 * because of: (1) erase, (2) program or (3) lock bit
-	 * configuration. So we just wait for the longest timeout of
-	 * the (1)-(3), i.e. the erase timeout.
-	 */
-
-	/* wait at least 35ns (W12) before issuing Read Status Register */
-	/*udelay(1); */
-	addr = (FPWV *) info->start[sector];
-	*addr = (FPW) INTEL_STATUS;
-
-	start = get_timer(0);
-	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
-			*addr = (FPW) INTEL_RESET;	/* restore read mode */
-			printf("WSM busy too long, can't get prot status\n");
-			return 1;
-		}
-	}
-
-	/* issue the Read Identifier Codes command */
-	*addr = (FPW) INTEL_READID;
-
-	/* Intel example code uses offset of 4 for 8-bit flash */
-	lock_conf_addr = (FPWV *) info->start[sector];
-	ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0;
-
-	/* put flash back in read mode */
-	*addr = (FPW) INTEL_RESET;
-
-	return ret;
-}
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		type = (info->flash_id & FLASH_VENDMASK);
-		printf("Can't erase unknown flash type %08lx - aborted\n",
-		       info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot)
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	else
-		printf("\n");
-
-	start = get_timer(0);
-	last = start;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			int min = 0;
-
-			printf("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			*addr = (FPW) INTEL_READID;
-			min = addr[INTEL_CFI_TERB];
-			min = 1 << min;	/* ms */
-			min = (min / info->sector_count) * 1000;
-
-			/* start erase block */
-			*addr = (FPW) INTEL_CLEAR;	/* clear status register */
-			*addr = (FPW) INTEL_ERASE;	/* erase setup */
-			*addr = (FPW) INTEL_CONFIRM;	/* erase confirm */
-
-			while ((*addr & (FPW) INTEL_FINISHED) !=
-			       (FPW) INTEL_FINISHED) {
-
-				if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
-					printf("Timeout\n");
-					*addr = (FPW) INTEL_SUSERASE;	/* suspend erase     */
-					*addr = (FPW) INTEL_RESET;	/* reset to read mode */
-
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = (FPW) INTEL_RESET;	/* resest to read mode          */
-
-			printf(" done\n");
-		}
-	}
-
-	return rcode;
-}
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		{
-			ulong cp, wp;
-			FPW data;
-			int i, l, rc, port_width;
-
-			/* get lower word aligned address */
-			wp = addr;
-			port_width = 1;
-
-			/*
-			 * handle unaligned start bytes
-			 */
-			if ((l = addr - wp) != 0) {
-				data = 0;
-				for (i = 0, cp = wp; i < l; ++i, ++cp) {
-					data = (data << 8) | (*(uchar *) cp);
-				}
-
-				for (; i < port_width && cnt > 0; ++i) {
-					data = (data << 8) | *src++;
-					--cnt;
-					++cp;
-				}
-
-				for (; cnt == 0 && i < port_width; ++i, ++cp)
-					data = (data << 8) | (*(uchar *) cp);
-
-				if ((rc = write_data(info, wp, data)) != 0)
-					return (rc);
-
-				wp += port_width;
-			}
-
-			/* handle word aligned part */
-			while (cnt >= 2) {
-				data = *((FPW *) src);
-
-				if ((rc =
-				     write_data(info, (ulong) ((FPWV *) wp),
-						(FPW) data)) != 0) {
-					return (rc);
-				}
-
-				src += sizeof(FPW);
-				wp += sizeof(FPW);
-				cnt -= sizeof(FPW);
-			}
-
-			if (cnt == 0)
-				return ERR_OK;
-
-			/*
-			 * handle unaligned tail bytes
-			 */
-			data = 0;
-			for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-				data = (data >> 8) | (*src++ << 8);
-				--cnt;
-			}
-			for (; i < 2; ++i, ++cp) {
-				data |= (*(uchar *) cp);
-			}
-
-			return write_data(info, (ulong) ((FPWV *) wp),
-					  (FPW) data);
-
-		}		/* case FLASH_MAN_INTEL */
-
-	}			/* switch */
-
-	return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_data(flash_info_t * info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf("not erased at %08lx (%lx)\n", (ulong) addr,
-		       (ulong) * addr);
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = (int)disable_interrupts();
-
-	*addr = (FPW) INTEL_CLEAR;
-	*addr = (FPW) INTEL_RESET;
-
-	*addr = (FPW) INTEL_WRSETUP;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*addr = (FPW) INTEL_SUSERASE;	/* suspend mode */
-			*addr = (FPW) INTEL_CLEAR;	/* clear status */
-			*addr = (FPW) INTEL_RESET;	/* reset */
-			return (1);
-		}
-	}
-
-	*addr = (FPW) INTEL_CLEAR;	/* clear status */
-	*addr = (FPW) INTEL_RESET;	/* restore read mode */
-
-	return (0);
-}
-
-#ifdef CFG_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect(flash_info_t * info, long sector, int prot)
-{
-	int rcode = 0;		/* assume success */
-	FPWV *addr;		/* address of sector */
-	FPW value;
-
-	addr = (FPWV *) (info->start[sector]);
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		*addr = (FPW) INTEL_RESET;	/* make sure in read mode */
-		*addr = (FPW) INTEL_LOCKBIT;	/* lock command setup */
-
-		if (prot)
-			*addr = (FPW) INTEL_PROTECT;	/* lock sector */
-		else
-			*addr = (FPW) INTEL_CONFIRM;	/* unlock sector */
-
-		/* now see if it really is locked/unlocked as requested */
-		*addr = (FPW) INTEL_READID;
-
-		/* read sector protection at sector address, (A7 .. A0) = 0x02.
-		 * D0 = 1 for each device if protected.
-		 * If at least one device is protected the sector is marked
-		 * protected, but return failure. Mixed protected and
-		 * unprotected devices within a sector should never happen.
-		 */
-		value = addr[2] & (FPW) INTEL_PROTECT;
-		if (value == 0)
-			info->protect[sector] = 0;
-		else if (value == (FPW) INTEL_PROTECT)
-			info->protect[sector] = 1;
-		else {
-			/* error, mixed protected and unprotected */
-			rcode = 1;
-			info->protect[sector] = 1;
-		}
-		if (info->protect[sector] != prot)
-			rcode = 1;	/* failed to protect/unprotect as requested */
-
-		/* reload all protection bits from hardware for now */
-		flash_sync_real_protect(info);
-		break;
-
-	default:
-		/* no hardware protect that we support */
-		info->protect[sector] = prot;
-		break;
-	}
-
-	return rcode;
-}
-#endif				/* CFG_FLASH_PROTECTION */
-#endif				/* CFG_FLASH_CFI */