summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPeter Pearse <peter.pearse@arm.com>2007-05-09 11:37:56 +0100
committerPeter Pearse <peter.pearse@arm.com>2007-05-09 11:37:56 +0100
commitb0d8f5bf0d215adc9424cb228b2484dbf07f7761 (patch)
treeddb50f27491089e4e270833cd4d9d33c55ced861
parent29f3be0caf0799ca6b89dfd9824c15619a50000f (diff)
New board SMN42 branch
-rwxr-xr-xMAKEALL2
-rwxr-xr-xMakefile5
-rw-r--r--board/lpc2292sodimm/Makefile35
-rw-r--r--board/lpc2292sodimm/flash.c240
-rw-r--r--common/soft_i2c.c3
-rw-r--r--disk/part.c1
-rw-r--r--drivers/Makefile2
-rw-r--r--fs/fat/fat.c7
-rw-r--r--include/asm-arm/arch-arm720t/hardware.h2
-rw-r--r--include/configs/lpc2292sodimm.h14
10 files changed, 43 insertions, 268 deletions
diff --git a/MAKEALL b/MAKEALL
index d7cd8d74203..17ea97ea22b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -185,7 +185,7 @@ LIST_SA="assabet dnp1110 gcplus lart shannon"
LIST_ARM7=" \
armadillo B2 ep7312 evb4510 \
impa7 integratorap ap7 ap720t \
- lpc2292sodimm modnet50 \
+ lpc2292sodimm modnet50 SMN42 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index ceee2c7bed3..3e547fdb306 100755
--- a/Makefile
+++ b/Makefile
@@ -2100,7 +2100,10 @@ evb4510_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t evb4510
lpc2292sodimm_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm
+ @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
+
+SMN42_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
#########################################################################
## XScale Systems
diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile
index 5a30198e21a..18a95d7f9b8 100644
--- a/board/lpc2292sodimm/Makefile
+++ b/board/lpc2292sodimm/Makefile
@@ -1,7 +1,6 @@
#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -24,35 +23,29 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lpc2292sodimm.o flash.o mmc.o spi.o mmc_hw.o eth.o
-SOBJS := lowlevel_init.o iap_entry.o
+COBJS := flash.o lpc2292sodimm.o
+SOBJTS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJTS))
-# this MUST be compiled as thumb code!
-iap_entry.o:
- arm-linux-gcc -D__ASSEMBLY__ -g -Os -fno-strict-aliasing \
- -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ \
- -DTEXT_BASE=0x81500000 -I/home/garyj/proj/LPC/u-boot/include \
- -fno-builtin -ffreestanding -nostdinc -isystem \
- /opt/eldk/arm/usr/bin/../lib/gcc/arm-linux/4.0.0/include -pipe \
- -DCONFIG_ARM -D__ARM__ -march=armv4t -mtune=arm7tdmi -mabi=apcs-gnu \
- -c -o iap_entry.o iap_entry.S
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
- rm -f $(LIB) core *.bak .depend
+ rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c
index 55aaabfe6f6..0fb08430c53 100644
--- a/board/lpc2292sodimm/flash.c
+++ b/board/lpc2292sodimm/flash.c
@@ -1,6 +1,9 @@
/*
* (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
*
+ * Modified to use the routines in cpu/arm720t/lpc2292/flash.c by
+ * Gary Jennejohn <garyj@denx,de>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -20,84 +23,16 @@
#include <common.h>
#include <asm/arch/hardware.h>
-/* IAP commands use 32 bytes at the top of CPU internal sram, we
- use 512 bytes below that */
-#define COPY_BUFFER_LOCATION 0x40003de0
-
-#define IAP_LOCATION 0x7ffffff1
-#define IAP_CMD_PREPARE 50
-#define IAP_CMD_COPY 51
-#define IAP_CMD_ERASE 52
-#define IAP_CMD_CHECK 53
-#define IAP_CMD_ID 54
-#define IAP_CMD_VERSION 55
-#define IAP_CMD_COMPARE 56
-
-#define IAP_RET_CMD_SUCCESS 0
-
#define SST_BASEADDR 0x80000000
#define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1)))
#define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1)))
-static unsigned long command[5];
-static unsigned long result[2];
-
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-extern void iap_entry(unsigned long * command, unsigned long * result);
-
-/*-----------------------------------------------------------------------
- *
- */
-int get_flash_sector(flash_info_t * info, ulong flash_addr)
-{
- int i;
-
- for(i=1; i < (info->sector_count); i++) {
- if (flash_addr < (info->start[i]))
- break;
- }
-
- return (i-1);
-}
-
-/*-----------------------------------------------------------------------
- * This function assumes that flash_addr is aligned on 512 bytes boundary
- * in flash. This function also assumes that prepare have been called
- * for the sector in question.
- */
-int copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
-{
- int first_sector;
- int last_sector;
-
- first_sector = get_flash_sector(info, flash_addr);
- last_sector = get_flash_sector(info, flash_addr + 512 - 1);
-
- /* prepare sectors for write */
- command[0] = IAP_CMD_PREPARE;
- command[1] = first_sector;
- command[2] = last_sector;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP prepare failed\n");
- return ERR_PROG_ERROR;
- }
-
- command[0] = IAP_CMD_COPY;
- command[1] = flash_addr;
- command[2] = COPY_BUFFER_LOCATION;
- command[3] = 512;
- command[4] = CFG_SYS_CLK_FREQ >> 10;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP copy failed\n");
- return 1;
- }
-
- return 0;
-}
+extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
+extern int lpc2292_flash_erase(flash_info_t *, int, int);
+extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong);
/*-----------------------------------------------------------------------
*
@@ -220,56 +155,6 @@ void flash_print_info (flash_info_t * info)
printf ("\n");
}
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase_philips (flash_info_t * info, int s_first, int s_last)
-{
- int flag;
- int prot;
- int sect;
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
-
- flag = disable_interrupts();
-
- printf ("Erasing %d sectors starting at sector %2d.\n"
- "This make take some time ... ",
- s_last - s_first + 1, s_first);
-
- command[0] = IAP_CMD_PREPARE;
- command[1] = s_first;
- command[2] = s_last;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP prepare failed\n");
- return ERR_PROTECTED;
- }
-
- command[0] = IAP_CMD_ERASE;
- command[1] = s_first;
- command[2] = s_last;
- command[3] = CFG_SYS_CLK_FREQ >> 10;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP erase failed\n");
- return ERR_PROTECTED;
- }
-
- if (flag)
- enable_interrupts();
-
- return ERR_OK;
-}
-
int flash_erase_sst (flash_info_t * info, int s_first, int s_last)
{
int i;
@@ -294,7 +179,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
case (SST_MANUFACT & FLASH_VENDMASK):
return flash_erase_sst(info, s_first, s_last);
case (PHILIPS_LPC2292 & FLASH_VENDMASK):
- return flash_erase_philips(info, s_first, s_last);
+ return lpc2292_flash_erase(info, s_first, s_last);
default:
return ERR_PROTECTED;
}
@@ -353,122 +238,13 @@ int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
return ret;
}
-int write_buff_philips (flash_info_t * info,
- uchar * src,
- ulong addr,
- ulong cnt)
-{
- int first_copy_size;
- int last_copy_size;
- int first_block;
- int last_block;
- int nbr_mid_blocks;
- uchar memmap_value;
- ulong i;
- uchar* src_org;
- uchar* dst_org;
- int ret = ERR_OK;
-
- src_org = src;
- dst_org = (uchar*)addr;
-
- first_block = addr / 512;
- last_block = (addr + cnt) / 512;
- nbr_mid_blocks = last_block - first_block - 1;
-
- first_copy_size = 512 - (addr % 512);
- last_copy_size = (addr + cnt) % 512;
-
-#if 0
- printf("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
- "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
- (ulong)(first_block * 512),
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)src,
- (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
- first_copy_size,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)(first_block * 512));
-#endif
-
- /* copy first block */
- memcpy((void*)COPY_BUFFER_LOCATION,
- (void*)(first_block * 512), 512);
- memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
- src, first_copy_size);
- copy_buffer_to_flash(info, first_block * 512);
- src += first_copy_size;
- addr += first_copy_size;
-
- /* copy middle blocks */
- for (i = 0; i < nbr_mid_blocks; i++) {
-#if 0
- printf("copy middle block: %lX -> %lX 512 bytes, "
- "%lX -> %lX 512 bytes\n",
- (ulong)src,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)addr);
-#endif
- memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
- copy_buffer_to_flash(info, addr);
- src += 512;
- addr += 512;
- }
-
-
- if (last_copy_size > 0) {
-#if 0
- printf("copy last block: (1) %lX -> %lX 0x200 bytes, "
- "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
- (ulong)(last_block * 512),
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)src,
- (ulong)(COPY_BUFFER_LOCATION),
- last_copy_size,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)addr);
-#endif
- /* copy last block */
- memcpy((void*)COPY_BUFFER_LOCATION,
- (void*)(last_block * 512), 512);
- memcpy((void*)COPY_BUFFER_LOCATION,
- src, last_copy_size);
- copy_buffer_to_flash(info, addr);
- }
-
- /* verify write */
- memmap_value = GET8(MEMMAP);
-
- disable_interrupts();
-
- PUT8(MEMMAP, 01); /* we must make sure that initial 64
- bytes are taken from flash when we
- do the compare */
-
- for (i = 0; i < cnt; i++) {
- if (*dst_org != *src_org){
- printf("Write failed. Byte %lX differs\n", i);
- ret = ERR_PROG_ERROR;
- break;
- }
- dst_org++;
- src_org++;
- }
-
- PUT8(MEMMAP, memmap_value);
- enable_interrupts();
-
- return ret;
-}
-
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
switch (info->flash_id & FLASH_VENDMASK) {
case (SST_MANUFACT & FLASH_VENDMASK):
return write_buff_sst(info, src, addr, cnt);
case (PHILIPS_LPC2292 & FLASH_VENDMASK):
- return write_buff_philips(info, src, addr, cnt);
+ return lpc2292_write_buff(info, src, addr, cnt);
default:
return ERR_PROG_ERROR;
}
diff --git a/common/soft_i2c.c b/common/soft_i2c.c
index edad51bc418..0f6e3a938d2 100644
--- a/common/soft_i2c.c
+++ b/common/soft_i2c.c
@@ -36,6 +36,9 @@
#ifdef CONFIG_IXP425 /* only valid for IXP425 */
#include <asm/arch/ixp425.h>
#endif
+#ifdef CONFIG_LPC2292
+#include <asm/arch/hardware.h>
+#endif
#include <i2c.h>
#if defined(CONFIG_SOFT_I2C)
diff --git a/disk/part.c b/disk/part.c
index acc1a748e44..54de737c3ba 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -180,6 +180,7 @@ void dev_print (block_dev_desc_t *dev_desc)
(CONFIG_COMMANDS & CFG_CMD_SCSI) || \
(CONFIG_COMMANDS & CFG_CMD_USB) || \
defined(CONFIG_MMC) || \
+ (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
defined(CONFIG_SYSTEMACE) )
#if defined(CONFIG_MAC_PARTITION) || \
diff --git a/drivers/Makefile b/drivers/Makefile
index d68cba682be..c7fcc3f23e5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -30,7 +30,7 @@ LIB = $(obj)libdrivers.a
COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
- e1000.o eepro100.o \
+ e1000.o eepro100.o enc28j60.o \
i8042.o inca-ip_sw.o keyboard.o \
lan91c96.o macb.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index a823b5aba40..084ee44459e 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -89,8 +89,11 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no)
part_offset=0;
}
else {
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || defined(CONFIG_SYSTEMACE)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
+ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
+ (CONFIG_COMMANDS & CFG_CMD_USB) || \
+ (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
+ defined(CONFIG_SYSTEMACE) )
disk_partition_t info;
if(!get_partition_info(dev_desc, part_no, &info)) {
part_offset = info.start;
diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h
index 1e9cd41169d..3056ca7f673 100644
--- a/include/asm-arm/arch-arm720t/hardware.h
+++ b/include/asm-arm/arch-arm720t/hardware.h
@@ -36,8 +36,6 @@
/* include armadillo specific hardware file if there was one */
#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
/* include IntegratorCP/CM720T specific hardware file if there was one */
-#elif defined(CONFIG_LPC2292)
-#include <asm-arm/arch-arm720t/lpc2292_registers.h>
#else
#error No hardware file defined for this configuration
#endif
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index 7e515230a33..d817ea8d736 100644
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -1,12 +1,8 @@
/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
+ * Configuation settings for the LPC2292SODIMM board from Embedded Artists.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -31,7 +27,7 @@
#define __CONFIG_H
/*
- * If we are developing, we might want to start armboot from ram
+ * If we are developing, we might want to start u-boot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
#undef CONFIG_INIT_CRITICAL /* undef for developing */
@@ -154,5 +150,7 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_MMC 1
+/* we use this ethernet chip */
+#define CONFIG_ENC28J60
#endif /* __CONFIG_H */