Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig

This converts the following to Kconfig:
   CONFIG_SPL_OMAP3_ID_NAND

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

11 files changed, 7 insertions, 13 deletions

diff --git a/README b/README
index 1b31d0e58f..fc40ddfb27 100644
--- a/README
+++ b/README
@@ -2835,10 +2835,6 @@ FIT uImage format:
 		Define this if you need to first read the OOB and then the
 		data. This is used, for example, on davinci platforms.
 
-		CONFIG_SPL_OMAP3_ID_NAND
-		Support for an OMAP3-specific set of functions to return the
-		ID and MFR of the first attached NAND chip, if present.
-
 		CONFIG_SPL_RAM_DEVICE
 		Support for running image already present in ram, in SPL binary
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 72832ad099..7efef6b84b 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -20,6 +20,7 @@ config OMAP34XX
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
 	imply SPL_NAND_SUPPORT
+	imply SPL_OMAP3_ID_NAND
 	imply SPL_POWER_SUPPORT
 	imply SPL_SERIAL_SUPPORT
 	imply SYS_I2C_OMAP24XX
diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 7b298d671d..b90cadef8f 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -149,6 +149,12 @@ config TARGET_SNIPER
 
 endchoice
 
+config SPL_OMAP3_ID_NAND
+	bool "Support OMAP3-specific ID and MFR function"
+	help
+	  Support for an OMAP3-specific set of functions to return the
+	  ID and MFR of the first attached NAND chip, if present.
+
 config SYS_SOC
 	default "omap3"
 
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index a94d55fa3a..e0f5765eca 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -258,7 +258,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 89880916e5..26e2c8dc18 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -251,7 +251,6 @@
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
 /* Defines for SPL */
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
index 560e50081f..b4d7f17131 100644
--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -177,7 +177,6 @@
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
 /* Defines for SPL */
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 9930483406..3f4824259c 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -73,7 +73,6 @@
 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 #endif /* CONFIG_NAND */
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index dc137dbd41..c75027b411 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -119,7 +119,6 @@
 #define CONFIG_SYS_ONENAND_BLOCK_SIZE	(128*1024)
 
 /* NAND config */
-#define CONFIG_SPL_OMAP3_ID_NAND
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 67b5562da1..bdd4bb6c19 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -253,8 +253,6 @@
 
 /* Defines for SPL */
 
-#define CONFIG_SPL_OMAP3_ID_NAND
-
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index d47dc8bba9..9f6e243ef5 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -239,7 +239,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_OMAP3_ID_NAND
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4651bb55e7..648f83c6fb 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2223,7 +2223,6 @@ CONFIG_SPL_NAND_SIMPLE
 CONFIG_SPL_NAND_SOFTECC
 CONFIG_SPL_NAND_WORKSPACE
 CONFIG_SPL_NO_CPU_SUPPORT_CODE
-CONFIG_SPL_OMAP3_ID_NAND
 CONFIG_SPL_PAD_TO
 CONFIG_SPL_PANIC_ON_RAW_IMAGE
 CONFIG_SPL_PBL_PAD