summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@konsulko.com>2019-03-14 11:37:11 -0400
committerTom Rini <trini@konsulko.com>2019-03-14 11:37:11 -0400
commit9659eb46af6249b6e4b3712e60a1eb2e87fc48a1 (patch)
tree2d7e7149804ddbf6d0bc5e6cb3dd20706be45809
parent7f295ffed6f3c62bf15a48bb12b5757f4716f789 (diff)
parent1411298cbca83a8527d2c1b5c4d299871fc34cf1 (diff)
Merge branch 'master' of git://git.denx.de/u-boot-samsung
-rw-r--r--arch/arm/dts/exynos5422-odroidxu3.dts22
-rw-r--r--board/samsung/arndale/MAINTAINERS2
-rw-r--r--board/samsung/common/board.c25
-rw-r--r--board/samsung/common/bootscripts/autoboot.cmd10
-rw-r--r--board/samsung/common/exynos5-dt-types.c54
-rw-r--r--board/samsung/common/misc.c2
-rw-r--r--board/samsung/odroid/odroid.c35
-rw-r--r--configs/odroid-xu3_defconfig3
-rw-r--r--doc/device-tree-bindings/regulator/regulator.txt2
-rw-r--r--drivers/adc/exynos-adc.c2
-rw-r--r--drivers/power/regulator/regulator-uclass.c47
-rw-r--r--drivers/power/regulator/s2mps11_regulator.c15
-rw-r--r--include/configs/espresso7420.h2
-rw-r--r--include/configs/odroid.h2
-rw-r--r--include/configs/odroid_xu3.h20
-rw-r--r--include/power/regulator.h2
-rw-r--r--include/samsung/misc.h1
17 files changed, 211 insertions, 35 deletions
diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts
index e859dd1b98..6df6be9181 100644
--- a/arch/arm/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -32,6 +32,7 @@
adc@12D10000 {
u-boot,dm-pre-reloc;
+ vdd-supply = <&ldo4_reg>;
status = "okay";
};
@@ -44,6 +45,7 @@
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -51,18 +53,21 @@
regulator-name = "vddq_mmc0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
};
ldo4_reg: LDO4 {
regulator-name = "vdd_adc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
};
ldo5_reg: LDO5 {
regulator-name = "vdd_ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -70,6 +75,7 @@
regulator-name = "vdd_ldo6";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -77,6 +83,7 @@
regulator-name = "vdd_ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -84,6 +91,7 @@
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -91,6 +99,7 @@
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -98,6 +107,7 @@
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -105,6 +115,7 @@
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -112,6 +123,7 @@
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -119,12 +131,14 @@
regulator-name = "vddq_mmc2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-ramp-delay = <12000>;
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -132,6 +146,7 @@
regulator-name = "vdd_ldo16";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -139,6 +154,7 @@
regulator-name = "vdd_ldo17";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -146,18 +162,21 @@
regulator-name = "vdd_emmc_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12000>;
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-ramp-delay = <12000>;
};
ldo24_reg: LDO24 {
regulator-name = "tsp_io";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -165,6 +184,7 @@
regulator-name = "vdd_ldo26";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
+ regulator-ramp-delay = <12000>;
regulator-always-on;
};
@@ -256,7 +276,7 @@
};
serial@12C20000 {
- status="okay";
+ status = "okay";
};
mmc@12200000 {
diff --git a/board/samsung/arndale/MAINTAINERS b/board/samsung/arndale/MAINTAINERS
index 7dc17854d1..aa64c7a187 100644
--- a/board/samsung/arndale/MAINTAINERS
+++ b/board/samsung/arndale/MAINTAINERS
@@ -1,5 +1,5 @@
ARNDALE BOARD
-M: Chander Kashyap <k.chander@samsung.com>
+M: Krzysztof Kozlowski <krzk@kernel.org>
S: Maintained
F: board/samsung/arndale/
F: include/configs/arndale.h
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index 96228a86a1..9adbd1e2cf 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -249,11 +249,22 @@ int board_eth_init(bd_t *bis)
return 0;
}
-#ifdef CONFIG_DISPLAY_BOARDINFO
+#if defined(CONFIG_DISPLAY_BOARDINFO) || defined(CONFIG_DISPLAY_BOARDINFO_LATE)
int checkboard(void)
{
if (IS_ENABLED(CONFIG_BOARD_TYPES)) {
- const char *board_info = get_board_type();
+ const char *board_info;
+
+ if (IS_ENABLED(CONFIG_DISPLAY_BOARDINFO_LATE)) {
+ /*
+ * Printing type requires having revision, although
+ * this will succeed only if done late.
+ * Otherwise revision will be set in misc_init_r().
+ */
+ set_board_revision();
+ }
+
+ board_info = get_board_type();
if (board_info)
printf("Type: %s\n", board_info);
@@ -287,6 +298,16 @@ int board_late_init(void)
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
+ if (IS_ENABLED(CONFIG_BOARD_TYPES) &&
+ !IS_ENABLED(CONFIG_DISPLAY_BOARDINFO_LATE)) {
+ /*
+ * If revision was not set by late display boardinfo,
+ * set it here. At this point regulators should be already
+ * available.
+ */
+ set_board_revision();
+ }
+
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
set_board_info();
#endif
diff --git a/board/samsung/common/bootscripts/autoboot.cmd b/board/samsung/common/bootscripts/autoboot.cmd
index 11c724c4e0..d66bcccf5d 100644
--- a/board/samsung/common/bootscripts/autoboot.cmd
+++ b/board/samsung/common/bootscripts/autoboot.cmd
@@ -3,7 +3,7 @@
# ./tools/mkimage -c none -A arm -T script -d autoboot.cmd boot.scr
#
# It requires a list of environment variables to be defined before load:
-# platform dependent: boardname, fdtfile, console
+# platform dependent: board_name, fdtfile, console
# system dependent: mmcbootdev, mmcbootpart, mmcrootdev, mmcrootpart, rootfstype
#
setenv fdtaddr "40800000"
@@ -35,17 +35,17 @@ else
setenv initrd_addr -;
fi;"
-#### Routine: boot_fit - check that env $boardname is set and boot proper config of ITB image
+#### Routine: boot_fit - check that env $board_name is set and boot proper config of ITB image
setenv setboot_fit "
-if test -e '${boardname}'; then
+if test -e '${board_name}'; then
setenv fdt_addr ;
setenv initrd_addr ;
setenv kerneladdr 0x42000000;
setenv kernelname Image.itb;
- setenv itbcfg "\"#${boardname}\"";
+ setenv itbcfg "\"#${board_name}\"";
setenv imgbootcmd bootm;
else
- echo Warning! Variable: \$boardname is undefined!;
+ echo Warning! Variable: \$board_name is undefined!;
fi"
#### Routine: setboot_uimg - prepare env to boot uImage
diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c
index 7a86e91877..516c32923e 100644
--- a/board/samsung/common/exynos5-dt-types.c
+++ b/board/samsung/common/exynos5-dt-types.c
@@ -57,12 +57,48 @@ static unsigned int odroid_get_rev(void)
return 0;
}
+/*
+ * Read ADC at least twice and check the resuls. If regulator providing voltage
+ * on to measured point was just turned on, first reads might require time
+ * to stabilize.
+ */
+static int odroid_get_adc_val(unsigned int *adcval)
+{
+ unsigned int adcval_prev = 0;
+ int ret, retries = 20;
+
+ ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN,
+ &adcval_prev);
+ if (ret)
+ return ret;
+
+ while (retries--) {
+ mdelay(5);
+
+ ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN,
+ adcval);
+ if (ret)
+ return ret;
+
+ /*
+ * If difference between ADC reads is less than 3%,
+ * accept the result
+ */
+ if ((100 * abs(*adcval - adcval_prev) / adcval_prev) < 3)
+ return ret;
+
+ adcval_prev = *adcval;
+ }
+
+ return ret;
+}
+
static int odroid_get_board_type(void)
{
unsigned int adcval;
int ret, i;
- ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN, &adcval);
+ ret = odroid_get_adc_val(&adcval);
if (ret)
goto rev_default;
@@ -192,8 +228,11 @@ const char *get_board_type(void)
/**
* set_board_type() - set board type in gd->board_type.
- * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid,
- * then set its proper type.
+ * As default type set EXYNOS5_BOARD_GENERIC. If Odroid is detected,
+ * set its proper type based on device tree.
+ *
+ * This might be called early when some more specific ways to detect revision
+ * are not yet available.
*/
void set_board_type(void)
{
@@ -211,8 +250,15 @@ void set_board_type(void)
gd->board_type = of_match->data;
break;
}
+}
- /* If Odroid, then check its revision */
+/**
+ * set_board_revision() - set detailed board type in gd->board_type.
+ * Should be called when resources (e.g. regulators) are available
+ * so ADC can be used to detect the specific revision of a board.
+ */
+void set_board_revision(void)
+{
if (board_is_odroidxu3())
gd->board_type = odroid_get_board_type();
}
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index 05243fc896..53cd1b2907 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -101,7 +101,7 @@ void set_board_info(void)
bdtype = "";
sprintf(info, "%s%s", bdname, bdtype);
- env_set("boardname", info);
+ env_set("board_name", info);
#endif
snprintf(info, ARRAY_SIZE(info), "%s%x-%s%s.dtb",
CONFIG_SYS_SOC, s5p_cpu_id, bdname, bdtype);
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index 552333fe86..3e594fd850 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -54,6 +54,14 @@ void set_board_type(void)
gd->board_type = ODROID_TYPE_U3;
}
+void set_board_revision(void)
+{
+ /*
+ * Revision already set by set_board_type() because it can be
+ * executed early.
+ */
+}
+
const char *get_board_type(void)
{
const char *board_type[] = {"u3", "x2"};
@@ -462,18 +470,33 @@ struct dwc2_plat_otg_data s5pc210_otg_data = {
#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB)
+static void set_usb3503_ref_clk(void)
+{
+#ifdef CONFIG_BOARD_TYPES
+ /*
+ * gpx3-0 chooses primary (low) or secondary (high) reference clock
+ * frequencies table. The choice of clock is done through hard-wired
+ * REF_SEL pins.
+ * The Odroid Us have reference clock at 24 MHz (00 entry from secondary
+ * table) and Odroid Xs have it at 26 MHz (01 entry from primary table).
+ */
+ if (gd->board_type == ODROID_TYPE_U3)
+ gpio_direction_output(EXYNOS4X12_GPIO_X30, 0);
+ else
+ gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
+#else
+ /* Choose Odroid Xs frequency without board types */
+ gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
+#endif /* CONFIG_BOARD_TYPES */
+}
+
int board_usb_init(int index, enum usb_init_type init)
{
#ifdef CONFIG_CMD_USB
struct udevice *dev;
int ret;
- /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
- /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
- if (gd->board_type == ODROID_TYPE_U3)
- gpio_direction_output(EXYNOS4X12_GPIO_X30, 0);
- else
- gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
+ set_usb3503_ref_clk();
/* Disconnect, Reset, Connect */
gpio_direction_output(EXYNOS4X12_GPIO_X34, 0);
diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
index e35f8d6dde..887522a59b 100644
--- a/configs/odroid-xu3_defconfig
+++ b/configs/odroid-xu3_defconfig
@@ -10,6 +10,8 @@ CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_BOARD_TYPES=y
CONFIG_SYS_PROMPT="ODROID-XU3 # "
@@ -33,6 +35,7 @@ CONFIG_ADC=y
CONFIG_ADC_EXYNOS=y
CONFIG_DFU_MMC=y
CONFIG_MMC_DW=y
+CONFIG_SYS_I2C_S3C24X0=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x5000000
CONFIG_DM_PMIC=y
diff --git a/doc/device-tree-bindings/regulator/regulator.txt b/doc/device-tree-bindings/regulator/regulator.txt
index 65b69c4278..4ba642b7c7 100644
--- a/doc/device-tree-bindings/regulator/regulator.txt
+++ b/doc/device-tree-bindings/regulator/regulator.txt
@@ -35,6 +35,7 @@ Optional properties:
- regulator-max-microamp: a maximum allowed Current value
- regulator-always-on: regulator should never be disabled
- regulator-boot-on: enabled by bootloader/firmware
+- regulator-ramp-delay: ramp delay for regulator (in uV/us)
Note
The "regulator-name" constraint is used for setting the device's uclass
@@ -60,4 +61,5 @@ ldo0 {
regulator-max-microamp = <100000>;
regulator-always-on;
regulator-boot-on;
+ regulator-ramp-delay = <12000>;
};
diff --git a/drivers/adc/exynos-adc.c b/drivers/adc/exynos-adc.c
index d33e3d632a..12c49fc8ce 100644
--- a/drivers/adc/exynos-adc.c
+++ b/drivers/adc/exynos-adc.c
@@ -62,7 +62,7 @@ int exynos_adc_stop(struct udevice *dev)
/* Stop conversion */
cfg = readl(&regs->con1);
- cfg |= ~ADC_V2_CON1_STC_EN;
+ cfg &= ~ADC_V2_CON1_STC_EN;
writel(cfg, &regs->con1);
diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c
index 6f355b969a..9118b8eb39 100644
--- a/drivers/power/regulator/regulator-uclass.c
+++ b/drivers/power/regulator/regulator-uclass.c
@@ -35,10 +35,22 @@ int regulator_get_value(struct udevice *dev)
return ops->get_value(dev);
}
+static void regulator_set_value_ramp_delay(struct udevice *dev, int old_uV,
+ int new_uV, unsigned int ramp_delay)
+{
+ int delay = DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
+
+ debug("regulator %s: delay %u us (%d uV -> %d uV)\n", dev->name, delay,
+ old_uV, new_uV);
+
+ udelay(delay);
+}
+
int regulator_set_value(struct udevice *dev, int uV)
{
const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
struct dm_regulator_uclass_platdata *uc_pdata;
+ int ret, old_uV = uV, is_enabled = 0;
uc_pdata = dev_get_uclass_platdata(dev);
if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV)
@@ -49,7 +61,20 @@ int regulator_set_value(struct udevice *dev, int uV)
if (!ops || !ops->set_value)
return -ENOSYS;
- return ops->set_value(dev, uV);
+ if (uc_pdata->ramp_delay) {
+ is_enabled = regulator_get_enable(dev);
+ old_uV = regulator_get_value(dev);
+ }
+
+ ret = ops->set_value(dev, uV);
+
+ if (!ret) {
+ if (uc_pdata->ramp_delay && old_uV > 0 && is_enabled)
+ regulator_set_value_ramp_delay(dev, old_uV, uV,
+ uc_pdata->ramp_delay);
+ }
+
+ return ret;
}
/*
@@ -107,6 +132,7 @@ int regulator_set_enable(struct udevice *dev, bool enable)
{
const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
struct dm_regulator_uclass_platdata *uc_pdata;
+ int ret, old_enable = 0;
if (!ops || !ops->set_enable)
return -ENOSYS;
@@ -115,7 +141,22 @@ int regulator_set_enable(struct udevice *dev, bool enable)
if (!enable && uc_pdata->always_on)
return -EACCES;
- return ops->set_enable(dev, enable);
+ if (uc_pdata->ramp_delay)
+ old_enable = regulator_get_enable(dev);
+
+ ret = ops->set_enable(dev, enable);
+ if (!ret) {
+ if (uc_pdata->ramp_delay && !old_enable && enable) {
+ int uV = regulator_get_value(dev);
+
+ if (uV > 0) {
+ regulator_set_value_ramp_delay(dev, 0, uV,
+ uc_pdata->ramp_delay);
+ }
+ }
+ }
+
+ return ret;
}
int regulator_set_enable_if_allowed(struct udevice *dev, bool enable)
@@ -335,6 +376,8 @@ static int regulator_pre_probe(struct udevice *dev)
-ENODATA);
uc_pdata->always_on = dev_read_bool(dev, "regulator-always-on");
uc_pdata->boot_on = dev_read_bool(dev, "regulator-boot-on");
+ uc_pdata->ramp_delay = dev_read_u32_default(dev, "regulator-ramp-delay",
+ 0);
/* Those values are optional (-ENODATA if unset) */
if ((uc_pdata->min_uV != -ENODATA) &&
diff --git a/drivers/power/regulator/s2mps11_regulator.c b/drivers/power/regulator/s2mps11_regulator.c
index ced504eb14..67d1f9689d 100644
--- a/drivers/power/regulator/s2mps11_regulator.c
+++ b/drivers/power/regulator/s2mps11_regulator.c
@@ -346,6 +346,8 @@ static int s2mps11_ldo_hex2volt(int ldo, int hex)
case 11:
case 22:
case 23:
+ case 27:
+ case 35:
uV = hex * S2MPS11_LDO_STEP + S2MPS11_LDO_UV_MIN;
break;
default:
@@ -366,6 +368,8 @@ static int s2mps11_ldo_volt2hex(int ldo, int uV)
case 11:
case 22:
case 23:
+ case 27:
+ case 35:
hex = (uV - S2MPS11_LDO_UV_MIN) / S2MPS11_LDO_STEP;
break;
default:
@@ -547,7 +551,16 @@ static int ldo_get_enable(struct udevice *dev)
static int ldo_set_enable(struct udevice *dev, bool enable)
{
- return s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable);
+ int ret;
+
+ ret = s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable);
+ if (ret)
+ return ret;
+
+ /* Wait the "enable delay" for voltage to start to rise */
+ udelay(15);
+
+ return 0;
}
static int ldo_get_mode(struct udevice *dev)
diff --git a/include/configs/espresso7420.h b/include/configs/espresso7420.h
index 4e3b26c25c..5aeb009f03 100644
--- a/include/configs/espresso7420.h
+++ b/include/configs/espresso7420.h
@@ -21,8 +21,6 @@
/* select serial console configuration */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-
/* DRAM Memory Banks */
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index b8809c8dcc..9f2d43e3fa 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -132,7 +132,7 @@
"setenv kernelname Image.itb;" \
"run loadkernel;" \
"run kernel_args;" \
- "bootm ${kernel_addr_r}#${boardname}\0" \
+ "bootm ${kernel_addr_r}#${board_name}\0" \
"boot_uimg=" \
"setenv kernelname uImage;" \
"run check_dtb;" \
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
index f178549a72..af6004eaf5 100644
--- a/include/configs/odroid_xu3.h
+++ b/include/configs/odroid_xu3.h
@@ -7,7 +7,7 @@
#ifndef __CONFIG_ODROID_XU3_H
#define __CONFIG_ODROID_XU3_H
-#include "exynos5420-common.h"
+#include <configs/exynos5420-common.h>
#include <configs/exynos5-common.h>
#define CONFIG_BOARD_COMMON
@@ -18,7 +18,7 @@
#define TZPC_BASE_OFFSET 0x10000
-#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
/* Reserve the last 22 MiB for the secure firmware */
#define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)
#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
@@ -28,7 +28,7 @@
#define CONFIG_ENV_SIZE (SZ_1K * 16)
#define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
@@ -38,7 +38,7 @@
/* DFU */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
#define DFU_DEFAULT_POLL_TIMEOUT 300
-#define DFU_MANIFEST_POLL_TIMEOUT 25000
+#define DFU_MANIFEST_POLL_TIMEOUT 25000
/* THOR */
#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM
@@ -84,12 +84,16 @@
#define CONFIG_SET_DFU_ALT_INFO
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
-/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
-#define CONFIG_ODROID_REV_AIN 9
+/* Set soc_rev, soc_id, board_rev, board_name, fdtfile */
+#define CONFIG_ODROID_REV_AIN 9
#define CONFIG_REVISION_TAG
+/*
+ * Need to override existing one (smdk5420) with odroid so set_board_info will
+ * use proper prefix when creating full board_name (SYS_BOARD + type)
+ */
#undef CONFIG_SYS_BOARD
-#define CONFIG_SYS_BOARD "odroid"
+#define CONFIG_SYS_BOARD "odroid"
/* Define new extra env settings, including DFU settings */
#undef CONFIG_EXTRA_ENV_SETTINGS
@@ -101,7 +105,7 @@
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"fdtfile=exynos5422-odroidxu3.dtb\0" \
- "boardname=odroidxu3\0" \
+ "board_name=odroidxu3\0" \
"mmcbootdev=0\0" \
"mmcrootdev=0\0" \
"mmcbootpart=1\0" \
diff --git a/include/power/regulator.h b/include/power/regulator.h
index 314160a894..6c6e2cd4f9 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -150,6 +150,7 @@ enum regulator_flag {
* @always_on* - bool type, true or false
* @boot_on* - bool type, true or false
* TODO(sjg@chromium.org): Consider putting the above two into @flags
+ * @ramp_delay - Time to settle down after voltage change (unit: uV/us)
* @flags: - flags value (see REGULATOR_FLAG_...)
* @name** - fdt regulator name - should be taken from the device tree
* ctrl_reg: - Control register offset used to enable/disable regulator
@@ -169,6 +170,7 @@ struct dm_regulator_uclass_platdata {
int max_uV;
int min_uA;
int max_uA;
+ unsigned int ramp_delay;
bool always_on;
bool boot_on;
const char *name;
diff --git a/include/samsung/misc.h b/include/samsung/misc.h
index 017560c256..4ff28a1df0 100644
--- a/include/samsung/misc.h
+++ b/include/samsung/misc.h
@@ -33,6 +33,7 @@ char *get_dfu_alt_system(char *interface, char *devstr);
char *get_dfu_alt_boot(char *interface, char *devstr);
#endif
void set_board_type(void);
+void set_board_revision(void);
const char *get_board_type(void);
#endif /* __SAMSUNG_MISC_COMMON_H__ */