nand_spl_simple: store ecc data on the stack

Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
which is likely to contain already loaded data.
The patch saves the oob data and the ecc on the stack replacing
the fixed address in RAM.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Simon Schwarz <simonschwarzcor@googlemail.com>
CC: Wolfgang Denk <wd@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>

8 files changed, 17 insertions, 55 deletions

diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
index 7eb08a3b08..4a4d02f4c8 100644
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -27,6 +27,11 @@ static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
 static nand_info_t mtd;
 static struct nand_chip nand_chip;
 
+#define ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
+					CONFIG_SYS_NAND_ECCSIZE)
+#define ECCTOTAL	(ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES)
+
+
 #if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
 /*
  * NAND command for small page NAND devices (512)
@@ -145,29 +150,21 @@ static int nand_is_bad_block(int block)
 static int nand_read_page(int block, int page, uchar *dst)
 {
 	struct nand_chip *this = mtd.priv;
-	u_char *ecc_calc;
-	u_char *ecc_code;
-	u_char *oob_data;
+	u_char ecc_calc[ECCTOTAL];
+	u_char ecc_code[ECCTOTAL];
+	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
 	int i;
 	int eccsize = CONFIG_SYS_NAND_ECCSIZE;
 	int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
-	int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+	int eccsteps = ECCSTEPS;
 	uint8_t *p = dst;
 
-	/*
-	 * No malloc available for now, just use some temporary locations
-	 * in SDRAM
-	 */
-	ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
-	ecc_code = ecc_calc + 0x100;
-	oob_data = ecc_calc + 0x200;
-
 	nand_command(block, page, 0, NAND_CMD_READOOB);
 	this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
 	nand_command(block, page, 0, NAND_CMD_READ0);
 
 	/* Pick the ECC bytes out of the oob data */
-	for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+	for (i = 0; i < ECCTOTAL; i++)
 		ecc_code[i] = oob_data[nand_ecc_pos[i]];
 
 
@@ -184,24 +181,17 @@ static int nand_read_page(int block, int page, uchar *dst)
 static int nand_read_page(int block, int page, void *dst)
 {
 	struct nand_chip *this = mtd.priv;
-	u_char *ecc_calc;
-	u_char *ecc_code;
-	u_char *oob_data;
+	u_char ecc_calc[ECCTOTAL];
+	u_char ecc_code[ECCTOTAL];
+	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
 	int i;
 	int eccsize = CONFIG_SYS_NAND_ECCSIZE;
 	int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
-	int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+	int eccsteps = ECCSTEPS;
 	uint8_t *p = dst;
 
 	nand_command(block, page, 0, NAND_CMD_READ0);
 
-	/* No malloc available for now, just use some temporary locations
-	 * in SDRAM
-	 */
-	ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
-	ecc_code = ecc_calc + 0x100;
-	oob_data = ecc_calc + 0x200;
-
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		if (this->ecc.mode != NAND_ECC_SOFT)
 			this->ecc.hwctl(&mtd, NAND_ECC_READ);
@@ -211,10 +201,10 @@ static int nand_read_page(int block, int page, void *dst)
 	this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
 
 	/* Pick the ECC bytes out of the oob data */
-	for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+	for (i = 0; i < ECCTOTAL; i++)
 		ecc_code[i] = oob_data[nand_ecc_pos[i]];
 
-	eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+	eccsteps = ECCSTEPS;
 	p = dst;
 
 	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 0a0c261bf9..b0dd2f0af6 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -359,10 +359,6 @@
 						10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
-						CONFIG_SYS_NAND_ECCSIZE)
-#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index d44eeec5b6..f797f3ffd9 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -360,10 +360,6 @@
 						10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
-						CONFIG_SYS_NAND_ECCSIZE)
-#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 758326bb9d..2b6a6ee091 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -343,11 +343,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
 
-#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
-						CONFIG_SYS_NAND_ECCSIZE)
-#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
-
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index 12acb27aef..65b3b78abe 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -138,11 +138,8 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
-#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE /	 \
-					 CONFIG_SYS_NAND_ECCSIZE)
 #define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES *	\
-					CONFIG_SYS_NAND_ECCSTEPS)
+
 #endif /* CONFIG_SYS_USE_NAND */
 
 /*
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 91af8a0256..4c7a686d39 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -418,10 +418,6 @@
 						10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
-						CONFIG_SYS_NAND_ECCSIZE)
-#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 2ce3959fda..1fcb7af9fe 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -121,10 +121,6 @@
 						10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
-						CONFIG_SYS_NAND_ECCSIZE)
-#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h
index 2f879c0bf1..362fa1d720 100644
--- a/include/configs/omap3_evm_quick_nand.h
+++ b/include/configs/omap3_evm_quick_nand.h
@@ -91,10 +91,6 @@
 						10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
-						CONFIG_SYS_NAND_ECCSIZE)
-#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000