MLK-10774-53 imx: update setting pmic volatage

We should not rely on pfuze_common_init to set the voltage,
may be we should remove the voltage settings in pfuze_common_init.
This patch is to setting the voltages in power_init_board.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>

9 files changed, 179 insertions, 8 deletions

diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c
index 4980bf7b00..d6a209e1a3 100644
--- a/board/freescale/common/pfuze.c
+++ b/board/freescale/common/pfuze.c
@@ -71,10 +71,10 @@ struct pmic *pfuze_common_init(unsigned char i2cbus)
 	pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
 
 	/* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
-	pmic_reg_read(p, PUZE_100_SW1ABCONF, &reg);
+	pmic_reg_read(p, PFUZE100_SW1ABCONF, &reg);
 	reg &= ~SW1xCONF_DVSSPEED_MASK;
 	reg |= SW1xCONF_DVSSPEED_4US;
-	pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+	pmic_reg_write(p, PFUZE100_SW1ABCONF, reg);
 
 	/* Set SW1C standby voltage to 0.975V */
 	pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 2ee82109d5..e20cd91444 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -768,12 +768,40 @@ int board_init(void)
 static struct pmic *pfuze;
 int power_init_board(void)
 {
-	unsigned int value;
+	unsigned int value, ret;
 
 	pfuze = pfuze_common_init(I2C_PMIC);
 	if (!pfuze)
 		return -ENODEV;
 
+	ret = pfuze_mode_init(pfuze, APS_PFM);
+	if (ret < 0)
+		return ret;
+
+	/* set SW1AB staby volatage 0.975V*/
+	pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &value);
+	value &= ~0x3f;
+	value |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, value);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &value);
+	value &= ~0xc0;
+	value |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, value);
+
+	/* set SW1C staby volatage 0.975V*/
+	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &value);
+	value &= ~0x3f;
+	value |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, value);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &value);
+	value &= ~0xc0;
+	value |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, value);
+
 	if (is_mx6dqp()) {
 		/* set SW2 staby volatage 0.975V*/
 		pmic_reg_read(pfuze, PFUZE100_SW2STBY, &value);
@@ -782,7 +810,7 @@ int power_init_board(void)
 		pmic_reg_write(pfuze, PFUZE100_SW2STBY, value);
 	}
 
-	return pfuze_mode_init(pfuze, APS_PFM);
+	return 0;
 }
 
 #ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 03f6805e71..eedeb944ee 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -1025,6 +1025,30 @@ int power_init_board(void)
 	reg |= LDOB_3_00V;
 	pmic_reg_write(pfuze, PFUZE100_VGEN5VOL, reg);
 
+	/* set SW1AB staby volatage 0.975V*/
+	pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+	/* set SW1C staby volatage 0.975V*/
+	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
 	return 0;
 }
 
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index c7210551cf..76a991ffa6 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -380,11 +380,41 @@ struct i2c_pads_info i2c_pad_info1 = {
 static struct pmic *pfuze;
 int power_init_board(void)
 {
+	unsigned int reg, ret;
+
 	pfuze = pfuze_common_init(I2C_PMIC);
 	if (!pfuze)
 		return -ENODEV;
 
-	return pfuze_mode_init(pfuze, APS_PFM);
+	ret = pfuze_mode_init(pfuze, APS_PFM);
+	if (ret < 0)
+		return ret;
+
+	/* set SW1AB staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+	/* set SW1C staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+	return 0;
 }
 
 #ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
index db0de6ede2..3d23408753 100644
--- a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
+++ b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
@@ -107,11 +107,40 @@ struct i2c_pads_info i2c_pad_info2 = {
 static struct pmic *pfuze;
 int power_init_board(void)
 {
+	unsigned int reg, ret;
 	pfuze = pfuze_common_init(I2C_PMIC);
 	if (!pfuze)
 		return -ENODEV;
 
-	return pfuze_mode_init(pfuze, APS_PFM);
+	ret = pfuze_mode_init(pfuze, APS_PFM);
+	if (ret < 0)
+		return ret;
+
+	/* set SW1AB staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= PFUZE100_SW1ABC_SETP(9750);
+	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+	/* set SW1C staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= PFUZE100_SW1ABC_SETP(9750);
+	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+	return 0;
 }
 
 #ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
index 7236d57062..88318ed94b 100644
--- a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
+++ b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
@@ -112,11 +112,41 @@ struct i2c_pads_info i2c_pad_info2 = {
 static struct pmic *pfuze;
 int power_init_board(void)
 {
+	unsigned int ret, reg;
+
 	pfuze = pfuze_common_init(I2C_PMIC);
 	if (!pfuze)
 		return -ENODEV;
 
-	return pfuze_mode_init(pfuze, APS_PFM);
+	ret = pfuze_mode_init(pfuze, APS_PFM);
+	if (ret < 0)
+		return ret;
+
+	/* set SW1AB staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= PFUZE100_SW1ABC_SETP(9750);
+	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+	/* set SW1C staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= PFUZE100_SW1ABC_SETP(9750);
+	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+	return 0;
 }
 
 #ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
index 6a026d447e..6019dde0e0 100644
--- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
+++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
@@ -132,12 +132,30 @@ int power_init_board(void)
 	if (ret < 0)
 		return ret;
 
+	/* set SW1AB standby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= PFUZE100_SW1ABC_SETP(9750);
+	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
 	/* set SW1C standby volatage 1.10V */
 	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
 	reg &= ~0x3f;
 	reg |= PFUZE100_SW1ABC_SETP(11000);
 	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
 
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
 	/* Enable power of VGEN5 3V3, needed for SD3 */
 	pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, &reg);
 	reg &= ~LDO_VOL_MASK;
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 621f205a6d..4e545b52e1 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -475,12 +475,24 @@ int power_init_board(void)
 	reg |= PFUZE100_SW1ABC_SETP(11000);
 	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
 
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
 	/* set SW1C standby volatage 1.10V */
 	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
 	reg &= ~0x3f;
 	reg |= PFUZE100_SW1ABC_SETP(11000);
 	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
 
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
 	/* Enable power of VGEN5 3V3, needed for SD3 */
 	pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, &reg);
 	reg &= ~LDO_VOL_MASK;
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 07199b4f89..fc32d50954 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -18,7 +18,7 @@ enum {
 	PFUZE100_SW1ABSTBY	= 0x21,
 	PFUZE100_SW1ABOFF	= 0x22,
 	PFUZE100_SW1ABMODE	= 0x23,
-	PUZE_100_SW1ABCONF	= 0x24,
+	PFUZE100_SW1ABCONF	= 0x24,
 	PFUZE100_SW1CVOL	= 0x2e,
 	PFUZE100_SW1CSTBY	= 0x2f,
 	PFUZE100_SW1COFF	= 0x30,