diff options
author | Sriram <srk@ti.com> | 2009-09-24 16:39:36 +0530 |
---|---|---|
committer | Justin Waters <justin.waters@timesys.com> | 2009-10-21 16:46:36 -0400 |
commit | ca01b1e7a4d895d0994a3b5f947cfe48788e3355 (patch) | |
tree | 4182f724a8abe03f6af9d1831e97ea4a4b534ef2 | |
parent | b57d400a5778b7b5c2176f2d1edd0aa6246f8a10 (diff) |
Cleanup extra prints
removed extra messages that print status information during bootup
-rw-r--r-- | board/omap3/omap3517evm/omap3517evm.c | 2 | ||||
-rw-r--r-- | drivers/net/ticpgmac.c | 3 |
2 files changed, 0 insertions, 5 deletions
diff --git a/board/omap3/omap3517evm/omap3517evm.c b/board/omap3/omap3517evm/omap3517evm.c index e9c3c5c6e7d..9f5774d28da 100644 --- a/board/omap3/omap3517evm/omap3517evm.c +++ b/board/omap3/omap3517evm/omap3517evm.c @@ -152,7 +152,6 @@ static void setup_net_chip(void) writel(readl(&gpio1_base->oe) & ~(GPIO30), &gpio1_base->oe); /* Now send a pulse on the GPIO pin */ - printf("Driving GPIO 30 low \n"); writel(GPIO30, &gpio1_base->cleardataout); ctr = 0; do{ @@ -160,7 +159,6 @@ static void setup_net_chip(void) ctr++; }while (ctr <300); - printf("Driving GPIO 30 high \n"); writel(GPIO30, &gpio1_base->setdataout); ctr =0; /* allow the PHY to stabilize and settle down */ diff --git a/drivers/net/ticpgmac.c b/drivers/net/ticpgmac.c index 6d7f64c8f7a..841bea59dc5 100644 --- a/drivers/net/ticpgmac.c +++ b/drivers/net/ticpgmac.c @@ -441,10 +441,7 @@ static int cpgmac_eth_hw_init(void) /* Override HW configuration value that were latched */ cpgmac_eth_phy_read(active_phy_addr, SPL_VEND_REG, &tmp); - printf("read HW config for PHY 0x%x\n",tmp); -// tmp |= (1 << 14) | ( 7 << 5) ; tmp = 0x60e0; - printf("Program HW config as 0x%x \n",tmp); cpgmac_eth_phy_write(active_phy_addr,SPL_VEND_REG,tmp); /* Soft reset the PHY */ |