diff options
| author | Tom Rini <trini@konsulko.com> | 2021-07-06 18:10:10 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2021-07-06 18:10:10 -0400 |
| commit | 5617efd2c882562b716a61bc0dc0edda46b045df (patch) | |
| tree | ea55ae3b5f8b5ed7cc2b51e07c03c13cf8058147 | |
| parent | b5f9d2f3aae7b208273546965be4ea5497930882 (diff) | |
| parent | 725cf89512eba9a49d447f009e0b97fdf2ae5dd6 (diff) | |
Merge branch '2021-07-06-platform-updates'
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support.
- Drop PCI support from the integrator family of boards
- Add synquacer support
- Assorted lpc32xx updates and improvements
- snapdragon (and related) fixes, Broadcom iproc update
72 files changed, 4320 insertions, 742 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0448787b8b..03529d7b46 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -90,6 +90,9 @@ config HAS_VBAR config HAS_THUMB2 bool +config GPIO_EXTRA_HEADER + bool + # Used for compatibility with asm files copied from the kernel config ARM_ASM_UNIFIED bool @@ -518,25 +521,30 @@ choice config ARCH_AT91 bool "Atmel AT91" + select GPIO_EXTRA_HEADER select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB select SPL_SEPARATE_BSS if SPL config TARGET_EDB93XX bool "Support edb93xx" select CPU_ARM920T + select GPIO_EXTRA_HEADER select PL010_SERIAL config TARGET_ASPENITE bool "Support aspenite" select CPU_ARM926EJS + select GPIO_EXTRA_HEADER config TARGET_GPLUGD bool "Support gplugd" select CPU_ARM926EJS + select GPIO_EXTRA_HEADER config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select SPL_DM_SPI if SPL imply CMD_SAVES help @@ -547,6 +555,7 @@ config ARCH_KIRKWOOD select ARCH_MISC_INIT select BOARD_EARLY_INIT_F select CPU_ARM926EJS + select GPIO_EXTRA_HEADER config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" @@ -555,6 +564,7 @@ config ARCH_MVEBU select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select GPIO_EXTRA_HEADER select SPL_DM_SPI if SPL select SPL_DM_SPI_FLASH if SPL select OF_CONTROL @@ -565,11 +575,13 @@ config ARCH_MVEBU config ARCH_ORION5X bool "Marvell Orion" select CPU_ARM926EJS + select GPIO_EXTRA_HEADER config TARGET_SPEAR300 bool "Support spear300" select BOARD_EARLY_INIT_F select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select PL011_SERIAL imply CMD_SAVES @@ -577,6 +589,7 @@ config TARGET_SPEAR310 bool "Support spear310" select BOARD_EARLY_INIT_F select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select PL011_SERIAL imply CMD_SAVES @@ -584,6 +597,7 @@ config TARGET_SPEAR320 bool "Support spear320" select BOARD_EARLY_INIT_F select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select PL011_SERIAL imply CMD_SAVES @@ -591,6 +605,7 @@ config TARGET_SPEAR600 bool "Support spear600" select BOARD_EARLY_INIT_F select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select PL011_SERIAL imply CMD_SAVES @@ -601,6 +616,7 @@ config TARGET_STV0991 select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select GPIO_EXTRA_HEADER select PL01X_SERIAL select SPI select SPI_FLASH @@ -610,18 +626,21 @@ config TARGET_X600 bool "Support x600" select BOARD_LATE_INIT select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select PL011_SERIAL select SUPPORT_SPL config TARGET_FLEA3 bool "Support flea3" select CPU_ARM1136 + select GPIO_EXTRA_HEADER config ARCH_BCM283X bool "Broadcom BCM283X family" select DM select DM_GPIO select DM_SERIAL + select GPIO_EXTRA_HEADER select OF_CONTROL select PL01X_SERIAL select SERIAL_SEARCH_ALL @@ -650,6 +669,7 @@ config ARCH_BCMSTB bool "Broadcom BCM7XXX family" select CPU_V7A select DM + select GPIO_EXTRA_HEADER select OF_CONTROL select OF_PRIOR_STAGE imply CMD_DM @@ -660,6 +680,7 @@ config ARCH_BCMSTB config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7A + select GPIO_EXTRA_HEADER imply BCM_SF2_ETH imply BCM_SF2_ETH_GMAC imply CMD_HASH @@ -671,6 +692,7 @@ config TARGET_BCMCYGNUS config TARGET_BCMNS2 bool "Support Broadcom Northstar2" select ARM64 + select GPIO_EXTRA_HEADER help Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit ARMv8 Cortex-A57 processors targeting a broad range of networking @@ -695,6 +717,7 @@ config ARCH_EXYNOS select DM_SPI select DM_SPI_FLASH select SPI + select GPIO_EXTRA_HEADER imply SYS_THUMB_BUILD imply CMD_DM imply FAT_WRITE @@ -706,6 +729,7 @@ config ARCH_S5PC1XX select DM_GPIO select DM_I2C select DM_SERIAL + select GPIO_EXTRA_HEADER imply CMD_DM config ARCH_HIGHBANK @@ -726,6 +750,7 @@ config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select DM select DM_SERIAL + select GPIO_EXTRA_HEADER select PL01X_SERIAL imply CMD_DM @@ -736,6 +761,7 @@ config ARCH_IPQ40XX select DM_GPIO select DM_SERIAL select DM_RESET + select GPIO_EXTRA_HEADER select MSM_SMEM select PINCTRL select CLK @@ -747,6 +773,7 @@ config ARCH_KEYSTONE bool "TI Keystone" select CMD_POWEROFF select CPU_V7A + select GPIO_EXTRA_HEADER select SUPPORT_SPL select SYS_ARCH_TIMER select SYS_THUMB_BUILD @@ -763,6 +790,7 @@ config ARCH_K3 config ARCH_OMAP2PLUS bool "TI OMAP2+" select CPU_V7A + select GPIO_EXTRA_HEADER select SPL_BOARD_INIT if SPL select SPL_STACK_R if SPL select SUPPORT_SPL @@ -771,6 +799,7 @@ config ARCH_OMAP2PLUS config ARCH_MESON bool "Amlogic Meson" + select GPIO_EXTRA_HEADER imply DISTRO_DEFAULTS imply DM_RNG help @@ -781,6 +810,7 @@ config ARCH_MESON config ARCH_MEDIATEK bool "MediaTek SoCs" select DM + select GPIO_EXTRA_HEADER select OF_CONTROL select SPL_DM if SPL select SPL_LIBCOMMON_SUPPORT if SPL @@ -797,6 +827,7 @@ config ARCH_LPC32XX select DM select DM_GPIO select DM_SERIAL + select GPIO_EXTRA_HEADER select SPL_DM if SPL select SUPPORT_SPL imply CMD_DM @@ -805,12 +836,14 @@ config ARCH_IMX8 bool "NXP i.MX8 platform" select ARM64 select DM + select GPIO_EXTRA_HEADER select OF_CONTROL select ENABLE_ARM_SOC_BOOT0_HOOK config ARCH_IMX8M bool "NXP i.MX8M platform" select ARM64 + select GPIO_EXTRA_HEADER select SYS_FSL_HAS_SEC if IMX_HAB select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE @@ -823,33 +856,39 @@ config ARCH_IMXRT select CPU_V7M select DM select DM_SERIAL + select GPIO_EXTRA_HEADER select SUPPORT_SPL imply CMD_DM config ARCH_MX23 bool "NXP i.MX23 family" select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select PL011_SERIAL select SUPPORT_SPL config ARCH_MX25 bool "NXP MX25" select CPU_ARM926EJS + select GPIO_EXTRA_HEADER imply MXC_GPIO config ARCH_MX28 bool "NXP i.MX28 family" select CPU_ARM926EJS + select GPIO_EXTRA_HEADER select PL011_SERIAL select SUPPORT_SPL config ARCH_MX31 bool "NXP i.MX31 family" select CPU_ARM1136 + select GPIO_EXTRA_HEADER config ARCH_MX7ULP bool "NXP MX7ULP" select CPU_V7A + select GPIO_EXTRA_HEADER select SYS_FSL_HAS_SEC if IMX_HAB select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE @@ -861,6 +900,7 @@ config ARCH_MX7 bool "Freescale MX7" select ARCH_MISC_INIT select CPU_V7A + select GPIO_EXTRA_HEADER select SYS_FSL_HAS_SEC if IMX_HAB select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE @@ -871,6 +911,7 @@ config ARCH_MX7 config ARCH_MX6 bool "Freescale MX6" select CPU_V7A + select GPIO_EXTRA_HEADER select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE @@ -886,18 +927,21 @@ config ARCH_MX5 bool "Freescale MX5" select BOARD_EARLY_INIT_F select CPU_V7A + select GPIO_EXTRA_HEADER imply MXC_GPIO config ARCH_NEXELL bool "Nexell S5P4418/S5P6818 SoC" select ENABLE_ARM_SOC_BOOT0_HOOK select DM + select GPIO_EXTRA_HEADER config ARCH_OWL bool "Actions Semi OWL SoCs" select DM select DM_ETH select DM_SERIAL + select GPIO_EXTRA_HEADER select OWL_SERIAL select CLK select CLK_OWL @@ -920,6 +964,7 @@ config ARCH_RMOBILE bool "Renesas ARM SoCs" select DM select DM_SERIAL + select GPIO_EXTRA_HEADER imply BOARD_EARLY_INIT_F imply CMD_DM imply FAT_WRITE @@ -932,6 +977,7 @@ config ARCH_SNAPDRAGON select DM select DM_GPIO select DM_SERIAL + select GPIO_EXTRA_HEADER select MSM_SMEM select OF_CONTROL select OF_SEPARATE @@ -947,6 +993,7 @@ config ARCH_SOCFPGA select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select DM select DM_SERIAL + select GPIO_EXTRA_HEADER select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select OF_CONTROL select SPL_DM_RESET if DM_RESET @@ -998,6 +1045,7 @@ config ARCH_SUNXI select DM_SCSI if SCSI select DM_SERIAL select DM_USB if DISTRO_DEFAULTS + select GPIO_EXTRA_HEADER select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE @@ -1057,6 +1105,7 @@ config ARCH_VERSAL select DM_ETH if NET select DM_MMC if MMC select DM_SERIAL + select GPIO_EXTRA_HEADER select OF_CONTROL imply BOARD_LATE_INIT imply ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -1064,6 +1113,7 @@ config ARCH_VERSAL config ARCH_VF610 bool "Freescale Vybrid" select CPU_V7A + select GPIO_EXTRA_HEADER select SYS_FSL_ERRATUM_ESDHC111 imply CMD_MTDPARTS imply MTD_RAW_NAND @@ -1080,6 +1130,7 @@ config ARCH_ZYNQ select DM_SPI select DM_SPI_FLASH select DM_USB if USB + select GPIO_EXTRA_HEADER select OF_CONTROL select SPI select SPL_BOARD_INIT if SPL @@ -1106,6 +1157,7 @@ config ARCH_ZYNQMP_R5 select DM_ETH if NET select DM_MMC if MMC select DM_SERIAL + select GPIO_EXTRA_HEADER select OF_CONTROL imply CMD_DM imply DM_USB_GADGET @@ -1123,6 +1175,7 @@ config ARCH_ZYNQMP select DM_SPI_FLASH if DM_SPI select DM_USB if USB select FIRMWARE + select GPIO_EXTRA_HEADER select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_CLK if SPL @@ -1143,23 +1196,27 @@ config ARCH_ZYNQMP config ARCH_TEGRA bool "NVIDIA Tegra" + select GPIO_EXTRA_HEADER imply DISTRO_DEFAULTS imply FAT_WRITE config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" select ARM64 + select GPIO_EXTRA_HEADER select PL01X_SERIAL config TARGET_VEXPRESS64_BASE_FVP bool "Support Versatile Express ARMv8a FVP BASE model" select ARM64 + select GPIO_EXTRA_HEADER select PL01X_SERIAL select SEMIHOSTING config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 + select GPIO_EXTRA_HEADER select PL01X_SERIAL select DM select OF_CONTROL @@ -1188,6 +1245,7 @@ config TARGET_LS2080A_EMU select ARM64 select ARMV8_MULTIENTRY select FSL_DDR_SYNC_REFRESH + select GPIO_EXTRA_HEADER help Support for Freescale LS2080A_EMU platform. The LS2080A Development System (EMULATOR) is a pre-silicon @@ -1201,6 +1259,7 @@ config TARGET_LS1088AQDS select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER select SUPPORT_SPL select FSL_DDR_INTERACTIVE if !SD_BOOT help @@ -1216,6 +1275,7 @@ config TARGET_LS2080AQDS select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER select SUPPORT_SPL imply SCSI imply SCSI_AHCI @@ -1237,6 +1297,7 @@ config TARGET_LS2080ARDB select SUPPORT_SPL select FSL_DDR_BIST select FSL_DDR_INTERACTIVE if !SPL + select GPIO_EXTRA_HEADER imply SCSI imply SCSI_AHCI help @@ -1251,6 +1312,7 @@ config TARGET_LS2081ARDB select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER select SUPPORT_SPL help Support for Freescale LS2081ARDB platform. @@ -1265,6 +1327,7 @@ config TARGET_LX2160ARDB select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER help Support for NXP LX2160ARDB platform. The lx2160ardb (LX2160A Reference design board (RDB) @@ -1278,6 +1341,7 @@ config TARGET_LX2160AQDS select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER help Support for NXP LX2160AQDS platform. The lx2160aqds (LX2160A QorIQ Development System (QDS) @@ -1292,6 +1356,7 @@ config TARGET_LX2162AQDS select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER help Support for NXP LX2162AQDS platform. The lx2162aqds support is based on LX2160A Layerscape Architecture processor. @@ -1302,6 +1367,7 @@ config TARGET_HIKEY select DM select DM_GPIO select DM_SERIAL + select GPIO_EXTRA_HEADER select OF_CONTROL select PL01X_SERIAL select SPECIFY_CONSOLE_INDEX @@ -1315,6 +1381,7 @@ config TARGET_HIKEY960 select ARM64 select DM select DM_SERIAL + select GPIO_EXTRA_HEADER select OF_CONTROL select PL01X_SERIAL imply CMD_DM @@ -1328,6 +1395,7 @@ config TARGET_POPLAR select DM select DM_SERIAL select DM_USB + select GPIO_EXTRA_HEADER select OF_CONTROL select PL01X_SERIAL imply CMD_DM @@ -1343,6 +1411,7 @@ config TARGET_LS1012AQDS select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER help Support for Freescale LS1012AQDS platform. The LS1012A Development System (QDS) is a high-performance @@ -1355,6 +1424,7 @@ config TARGET_LS1012ARDB select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER imply SCSI imply SCSI_AHCI help @@ -1369,6 +1439,7 @@ config TARGET_LS1012A2G5RDB select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER imply SCSI help Support for Freescale LS1012A2G5RDB platform. @@ -1382,6 +1453,7 @@ config TARGET_LS1012AFRWY select ARM64 select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER imply SCSI imply SCSI_AHCI help @@ -1395,6 +1467,7 @@ config TARGET_LS1012AFRDM select ARCH_LS1012A select ARM64 select ARCH_SUPPORT_TFABOOT + select GPIO_EXTRA_HEADER help Support for Freescale LS1012AFRDM platform. The LS1012A Freedom board (FRDM) is a high-performance @@ -1408,6 +1481,7 @@ config TARGET_LS1028AQDS select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER help Support for Freescale LS1028AQDS platform The LS1028A Development System (QDS) is a high-performance @@ -1421,6 +1495,7 @@ config TARGET_LS1028ARDB select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT + select GPIO_EXTRA_HEADER help Support for Freescale LS1028ARDB platform The LS1028A Development System (RDB) is a high-performance @@ -1436,6 +1511,7 @@ config TARGET_LS1088ARDB select BOARD_LATE_INIT select SUPPORT_SPL select FSL_DDR_INTERACTIVE if !SD_BOOT + select GPIO_EXTRA_HEADER help Support for NXP LS1088ARDB platform. The LS1088A Reference design board (RDB) is a high-performance @@ -1456,6 +1532,7 @@ config TARGET_LS1021AQDS select SYS_FSL_DDR select FSL_DDR_INTERACTIVE select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI + select GPIO_EXTRA_HEADER select SPI_FLASH_DATAFLASH if FSL_DSPI || FSL_QSPI imply SCSI @@ -1471,6 +1548,7 @@ config TARGET_LS1021ATWR select LS1_DEEP_SLEEP select SUPPORT_SPL select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI + select GPIO_EXTRA_HEADER imply SCSI config TARGET_PG_WCOM_SELI8 @@ -1484,6 +1562,7 @@ config TARGET_PG_WCOM_SELI8 select CPU_V7_HAS_VIRT select SYS_FSL_DDR select FSL_DDR_INTERACTIVE + select GPIO_EXTRA_HEADER select VENDOR_KM imply SCSI help @@ -1520,6 +1599,7 @@ config TARGET_LS1021ATSN select CPU_V7_HAS_VIRT select LS1_DEEP_SLEEP select SUPPORT_SPL + select GPIO_EXTRA_HEADER imply SCSI config TARGET_LS1021AIOT @@ -1532,6 +1612,7 @@ config TARGET_LS1021AIOT select CPU_V7_HAS_VIRT select SUPPORT_SPL select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI + select GPIO_EXTRA_HEADER imply SCSI help Support for Freescale LS1021AIOT platform. @@ -1551,6 +1632,7 @@ config TARGET_LS1043AQDS select FSL_DDR_INTERACTIVE if !SPL select FSL_DSPI if !SPL_NO_DSPI select DM_SPI_FLASH if FSL_DSPI + select GPIO_EXTRA_HEADER imply SCSI imply SCSI_AHCI help @@ -1567,6 +1649,7 @@ config TARGET_LS1043ARDB select SUPPORT_SPL select FSL_DSPI if !SPL_NO_DSPI select DM_SPI_FLASH if FSL_DSPI + select GPIO_EXTRA_HEADER help Support for Freescale LS1043ARDB platform. @@ -1583,6 +1666,7 @@ config TARGET_LS1046AQDS select FSL_DDR_BIST if !SPL select FSL_DDR_INTERACTIVE if !SPL select FSL_DDR_INTERACTIVE if !SPL + select GPIO_EXTRA_HEADER imply SCSI help Support for Freescale LS1046AQDS platform. @@ -1603,6 +1687,7 @@ config TARGET_LS1046ARDB select SUPPORT_SPL select FSL_DDR_BIST select FSL_DDR_INTERACTIVE if !SPL + select GPIO_EXTRA_HEADER imply SCSI help Support for Freescale LS1046ARDB platform. @@ -1619,6 +1704,7 @@ config TARGET_LS1046AFRWY select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select DM_SPI_FLASH if DM_SPI + select GPIO_EXTRA_HEADER imply SCSI help Support for Freescale LS1046AFRWY platform. @@ -1647,6 +1733,7 @@ config TARGET_SL28 select DM_SERIAL select DM_SPI select DM_USB + select GPIO_EXTRA_HEADER select SPL_DM if SPL select SPL_DM_SPI if SPL select SPL_DM_SPI_FLASH if SPL @@ -1659,6 +1746,7 @@ config TARGET_SL28 config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA + select GPIO_EXTRA_HEADER config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" @@ -1690,11 +1778,25 @@ config ARCH_UNIPHIER Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) +config ARCH_SYNQUACER + bool "Socionext SynQuacer SoCs" + select ARM64 + select DM + select GIC_V3 + select PSCI_RESET + select SYSRESET + select SYSRESET_PSCI + select OF_CONTROL + help + Support for SynQuacer SoC family developed by Socionext Inc. + This SoC is used on 96boards EE DeveloperBox. + config ARCH_STM32 bool "Support STMicroelectronics STM32 MCU with cortex M" select CPU_V7M select DM select DM_SERIAL + select GPIO_EXTRA_HEADER imply CMD_DM config ARCH_STI @@ -1720,6 +1822,7 @@ config ARCH_STM32MP select DM_GPIO select DM_RESET select DM_SERIAL + select GPIO_EXTRA_HEADER select MISC select OF_CONTROL select OF_LIBFDT @@ -1782,6 +1885,7 @@ config ARCH_OCTEONTX bool "Support OcteonTX SoCs" select CLK select DM + select GPIO_EXTRA_HEADER select ARM64 select OF_CONTROL select OF_LIVE @@ -1792,6 +1896,7 @@ config ARCH_OCTEONTX2 bool "Support OcteonTX2 SoCs" select CLK select DM + select GPIO_EXTRA_HEADER select ARM64 select OF_CONTROL select OF_LIVE @@ -1801,6 +1906,7 @@ config ARCH_OCTEONTX2 config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" select ARM64 + select GPIO_EXTRA_HEADER select OF_CONTROL select PL01X_SERIAL select SYS_CACHE_SHIFT_7 @@ -1814,6 +1920,7 @@ config ARCH_ASPEED config TARGET_DURIAN bool "Support Phytium Durian Platform" select ARM64 + select GPIO_EXTRA_HEADER help Support for durian platform. It has 2GB Sdram, uart and pcie. @@ -2027,6 +2134,7 @@ source "board/isee/igep003x/Kconfig" source "board/kontron/sl28/Kconfig" source "board/myir/mys_6ulx/Kconfig" source "board/seeed/npi_imx6ull/Kconfig" +source "board/socionext/developerbox/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" diff --git a/arch/arm/cpu/armv7/iproc-common/armpll.c b/arch/arm/cpu/armv7/iproc-common/armpll.c index efa3d9e5a9..8c3a323f06 100644 --- a/arch/arm/cpu/armv7/iproc-common/armpll.c +++ b/arch/arm/cpu/armv7/iproc-common/armpll.c @@ -19,19 +19,22 @@ struct armpll_parameters { }; struct armpll_parameters armpll_clk_tab[] = { - { 25, 64, 1, 1, 0}, - { 100, 64, 1, 1, 2}, - { 400, 64, 1, 1, 6}, - { 448, 71, 713050, 1, 6}, - { 500, 80, 1, 1, 6}, - { 560, 89, 629145, 1, 6}, - { 600, 96, 1, 1, 6}, - { 800, 64, 1, 1, 7}, - { 896, 71, 713050, 1, 7}, - { 1000, 80, 1, 1, 7}, - { 1100, 88, 1, 1, 7}, - { 1120, 89, 629145, 1, 7}, - { 1200, 96, 1, 1, 7}, + { 25, 64, 1, 1, 0}, + { 100, 64, 1, 1, 2}, + { 400, 64, 1, 1, 6}, + { 448, 71, 713050, 1, 6}, + { 500, 80, 1, 1, 6}, + { 560, 89, 629145, 1, 6}, + { 600, 96, 1, 1, 6}, + { 800, 64, 1, 1, 7}, + { 896, 71, 713050, 1, 7}, + { 1000, 80, 1, 1, 7}, + { 1100, 88, 1, 1, 7}, + { 1120, 89, 629145, 1, 7}, + { 1200, 96, 1, 1, 7}, + { 1300, 104, 1, 1, 7}, + { 1350, 108, 1, 1, 7}, + { 1400, 112, 1, 1, 7}, }; uint32_t armpll_config(uint32_t clkmhz) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index eef94c4706..59d8078558 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -249,6 +249,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ cn9130-crb-A.dtb \ cn9130-crb-B.dtb +dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \ uniphier-ld11-global.dtb \ uniphier-ld11-ref.dtb @@ -1116,6 +1117,8 @@ dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += imx8mm-cl-iot-gate.dtb +dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb + targets += $(dtb-y) # Add any required device tree compiler flags here diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts index fa348bc621..7e56140df2 100644 --- a/arch/arm/dts/dragonboard410c.dts +++ b/arch/arm/dts/dragonboard410c.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "skeleton64.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/pinctrl-snapdragon.h> / { @@ -91,7 +92,7 @@ gpio-controller; gpio-count = <122>; gpio-bank-name="soc"; - #gpio-cells = <1>; + #gpio-cells = <2>; }; ehci@78d9000 { @@ -123,6 +124,7 @@ bus-width = <0x4>; clock = <&clkc 1>; clock-frequency = <200000000>; + cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>; }; wcnss { diff --git a/arch/arm/dts/lpc3250-ea3250-u-boot.dtsi b/arch/arm/dts/lpc3250-ea3250-u-boot.dtsi new file mode 100644 index 0000000000..0c82e512c6 --- /dev/null +++ b/arch/arm/dts/lpc3250-ea3250-u-boot.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2021 Trevor Woerner <twoerner@gmail.com> + */ + +/{ + model = "Embedded Artists LPC3250 DevKit v2 board based on the NXP LPC3250 SoC"; + chosen { + stdout-path = &uart5; + }; +}; + +&uart5 { + compatible = "nxp,lpc3220-uart", "ns16550a"; +}; diff --git a/arch/arm/dts/lpc3250-ea3250.dts b/arch/arm/dts/lpc3250-ea3250.dts new file mode 100644 index 0000000000..63c6f17bb7 --- /dev/null +++ b/arch/arm/dts/lpc3250-ea3250.dts @@ -0,0 +1,273 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Embedded Artists LPC3250 board + * + * Copyright 2012 Roland Stigge <stigge@antcom.de> + */ + +/dts-v1/; +#include "lpc32xx.dtsi" + +/ { + model = "Embedded Artists LPC3250 board based on NXP LPC3250"; + compatible = "ea,ea3250", "nxp,lpc3250"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x4000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button { + label = "Interrupt Key"; + linux,code = <103>; + gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ + }; + + key1 { + label = "KEY1"; + linux,code = <1>; + gpios = <&pca9532 0 0>; + }; + + key2 { + label = "KEY2"; + linux,code = <2>; + gpios = <&pca9532 1 0>; + }; + + key3 { + label = "KEY3"; + linux,code = <3>; + gpios = <&pca9532 2 0>; + }; + + key4 { + label = "KEY4"; + linux,code = <4>; + gpios = <&pca9532 3 0>; + }; + + joy0 { + label = "Joystick Key 0"; + linux,code = <10>; + gpios = <&gpio 2 0 0>; /* P2.0 */ + }; + + joy1 { + label = "Joystick Key 1"; + linux,code = <11>; + gpios = <&gpio 2 1 0>; /* P2.1 */ + }; + + joy2 { + label = "Joystick Key 2"; + linux,code = <12>; + gpios = <&gpio 2 2 0>; /* P2.2 */ + }; + + joy3 { + label = "Joystick Key 3"; + linux,code = <13>; + gpios = <&gpio 2 3 0>; /* P2.3 */ + }; + + joy4 { + label = "Joystick Key 4"; + linux,code = <14>; + gpios = <&gpio 2 4 0>; /* P2.4 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + /* LEDs on OEM Board */ + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + + led2 { + gpios = <&gpio 2 10 1>; /* P2.10, active low */ + default-state = "off"; + }; + + led3 { + gpios = <&gpio 2 11 1>; /* P2.11, active low */ + default-state = "off"; + }; + + led4 { + gpios = <&gpio 2 12 1>; /* P2.12, active low */ + default-state = "off"; + }; + + /* LEDs on Base Board */ + + lede1 { + gpios = <&pca9532 8 0>; + default-state = "off"; + }; + lede2 { + gpios = <&pca9532 9 0>; + default-state = "off"; + }; + lede3 { + gpios = <&pca9532 10 0>; + default-state = "off"; + }; + lede4 { + gpios = <&pca9532 11 0>; + default-state = "off"; + }; + lede5 { + gpios = <&pca9532 12 0>; + default-state = "off"; + }; + lede6 { + gpios = <&pca9532 13 0>; + default-state = "off"; + }; + lede7 { + gpios = <&pca9532 14 0>; + default-state = "off"; + }; + lede8 { + gpios = <&pca9532 15 0>; + default-state = "off"; + }; + }; +}; + +/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ +&adc { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; + dac-clk = "wspll"; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; +}; + +&i2cusb { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2d { + compatible = "nxp,isp1301"; + reg = <0x2d>; + }; +}; + +&mac { + phy-mode = "rmii"; + use-iram; + status = "okay"; +}; + +/* Here, choose exactly one from: ohci, usbd */ +&ohci /* &usbd */ { + transceiver = <&isp1301>; + status = "okay"; +}; + +&sd { + wp-gpios = <&pca9532 5 0>; + cd-gpios = <&pca9532 4 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; +}; + +/* 128MB Flash via SLC NAND controller */ +&slc { + status = "okay"; + + nxp,wdr-clks = <14>; + nxp,wwidth = <260000000>; + nxp,whold = <104000000>; + nxp,wsetup = <200000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <34666666>; + nxp,rhold = <104000000>; + nxp,rsetup = <200000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + mtd0@0 { + label = "ea3250-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + mtd1@80000 { + label = "ea3250-uboot"; + reg = <0x00080000 0x000c0000>; + read-only; + }; + + mtd2@140000 { + label = "ea3250-kernel"; + reg = <0x00140000 0x00400000>; + }; + + mtd3@540000 { + label = "ea3250-rootfs"; + reg = <0x00540000 0x07ac0000>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart6 { + status = "okay"; +}; diff --git a/arch/arm/dts/lpc32xx.dtsi b/arch/arm/dts/lpc32xx.dtsi new file mode 100644 index 0000000000..c87066d6c9 --- /dev/null +++ b/arch/arm/dts/lpc32xx.dtsi @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NXP LPC32xx SoC + * + * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com> + * Copyright 2012 Roland Stigge <stigge@antcom.de> + */ + +#include <dt-bindings/clock/lpc32xx-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nxp,lpc3220"; + interrupt-parent = <&mic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0x0>; + }; + }; + + clocks { + xtal_32k: xtal_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k"; + }; + + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "xtal"; + }; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x00000000 0x00000000 0x10000000>, + <0x20000000 0x20000000 0x30000000>, + <0xe0000000 0xe0000000 0x04000000>; + + iram: sram@8000000 { + compatible = "mmio-sram"; + reg = <0x08000000 0x20000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x08000000 0x20000>; + }; + + /* + * Enable either SLC or MLC + */ + slc: flash@20020000 { + compatible = "nxp,lpc3220-slc"; + reg = <0x20020000 0x1000>; + clocks = <&clk LPC32XX_CLK_SLC>; + status = "disabled"; + }; + + mlc: flash@200a8000 { + compatible = "nxp,lpc3220-mlc"; + reg = <0x200a8000 0x11000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MLC>; + status = "disabled"; + }; + + dma: dma@31000000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x31000000 0x1000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_DMA>; + clock-names = "apb_pclk"; + }; + + usb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x31020000 0x00001000>; + + /* + * Enable either ohci or usbd (gadget)! + */ + ohci: ohci@0 { + compatible = "nxp,ohci-nxp", "usb-ohci"; + reg = <0x0 0x300>; + interrupt-parent = <&sic1>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_HOST>; + status = "disabled"; + }; + + usbd: usbd@0 { + compatible = "nxp,lpc3220-udc"; + reg = <0x0 0x300>; + interrupt-parent = <&sic1>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_LOW>; + clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; + status = "disabled"; + }; + + i2cusb: i2c@300 { + compatible = "nxp,pnx-i2c"; + reg = <0x300 0x100>; + interrupt-parent = <&sic1>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_I2C>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbclk: clock-controller@f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + }; + }; + + clcd: clcd@31040000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x31040000 0x1000>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + + mac: ethernet@31060000 { + compatible = "nxp,lpc-eth"; + reg = <0x31060000 0x1000>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MAC>; + status = "disabled"; + }; + + emc: memory-controller@31080000 { + compatible = "arm,pl175", "arm,primecell"; + reg = <0x31080000 0x1000>; + clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>; + clock-names = "mpmcclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe0000000 0x01000000>, + <1 0xe1000000 0x01000000>, + <2 0xe2000000 0x01000000>, + <3 0xe3000000 0x01000000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x20000000 0x20000000 0x30000000>; + + /* + * ssp0 and spi1 are shared pins; + * enable one in your board dts, as needed. + */ + ssp0: spi@20084000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x20084000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP0>; + clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@20088000 { + compatible = "nxp,lpc3220-spi"; + reg = <0x20088000 0x1000>; + clocks = <&clk LPC32XX_CLK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* + * ssp1 and spi2 are shared pins; + * enable one in your board dts, as needed. + */ + ssp1: spi@2008c000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x2008c000 0x1000>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP1>; + clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@20090000 { + compatible = "nxp,lpc3220-spi"; + reg = <0x20090000 0x1000>; + clocks = <&clk LPC32XX_CLK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2s0: i2s@20094000 { + compatible = "nxp,lpc3220-i2s"; + reg = <0x20094000 0x1000>; + status = "disabled"; + }; + + sd: sd@20098000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x20098000 0x1000>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SD>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + i2s1: i2s@2009c000 { + compatible = "nxp,lpc3220-i2s"; + reg = <0x2009c000 0x1000>; + status = "disabled"; + }; + + /* UART5 first since it is the default console, ttyS0 */ + uart5: serial@40090000 { + /* actually, ns16550a w/ 64 byte fifos! */ + compatible = "nxp,lpc3220-uart"; + reg = <0x40090000 0x1000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART5>; + status = "disabled"; + }; + + uart3: serial@40080000 { + compatible = "nxp,lpc3220-uart"; + reg = <0x40080000 0x1000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART3>; + status = "disabled"; + }; + + uart4: serial@40088000 { + compatible = "nxp,lpc3220-uart"; + reg = <0x40088000 0x1000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART4>; + status = "disabled"; + }; + + uart6: serial@40098000 { + compatible = "nxp,lpc3220-uart"; + reg = <0x40098000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART6>; + status = "disabled"; + }; + + i2c1: i2c@400a0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a0000 0x100>; + interrupt-parent = <&sic1>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk LPC32XX_CLK_I2C1>; + }; + + i2c2: i2c@400a8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a8000 0x100>; + interrupt-parent = <&sic1>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk LPC32XX_CLK_I2C2>; + }; + + mpwm: mpwm@400e8000 { + compatible = "nxp,lpc3220-motor-pwm"; + reg = <0x400e8000 0x78>; + status = "disabled"; + #pwm-cells = <2>; + }; + }; + + fab { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x20000000 0x20000000 0x30000000>; + + /* System Control Block */ + scb { + compatible = "simple-bus"; + ranges = <0x0 0x040004000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + clk: clock-controller@0 { + compatible = "nxp,lpc3220-clk"; + reg = <0x00 0x114>; + #clock-cells = <1>; + + clocks = <&xtal_32k>, <&xtal>; + clock-names = "xtal_32k", "xtal"; + }; + }; + + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + reg = <0x40008000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sic1: interrupt-controller@4000c000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x4000c000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>, + <30 IRQ_TYPE_LEVEL_LOW>; + }; + + sic2: interrupt-controller@40010000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x40010000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + }; + + uart1: serial@40014000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40014000 0x1000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@40018000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40018000 0x1000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart7: serial@4001c000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x4001c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + rtc: rtc@40024000 { + compatible = "nxp,lpc3220-rtc"; + reg = <0x40024000 0x1000>; + interrupt-parent = <&sic1>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_RTC>; + }; + + gpio: gpio@40028000 { + compatible = "nxp,lpc3220-gpio"; + reg = <0x40028000 0x1000>; + gpio-controller; + #gpio-cells = <3>; /* bank, pin, flags */ + }; + + timer4: timer@4002c000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4002c000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER4>; + clock-names = "timerclk"; + status = "disabled"; + }; + + timer5: timer@40030000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40030000 0x1000>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER5>; + clock-names = "timerclk"; + status = "disabled"; + }; + + watchdog: watchdog@4003c000 { + compatible = "nxp,pnx4008-wdt"; + reg = <0x4003c000 0x1000>; + clocks = <&clk LPC32XX_CLK_WDOG>; + }; + + timer0: timer@40044000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40044000 0x1000>; + clocks = <&clk LPC32XX_CLK_TIMER0>; + clock-names = "timerclk"; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; + + /* + * TSC vs. ADC: Since those two share the same + * hardware, you need to choose from one of the + * following two and do 'status = "okay";' for one of + * them + */ + + adc: adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; + status = "disabled"; + }; + + tsc: tsc@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; + status = "disabled"; + }; + + timer1: timer@4004c000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4004c000 0x1000>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER1>; + clock-names = "timerclk"; + }; + + key: key@40050000 { + compatible = "nxp,lpc3220-key"; + reg = <0x40050000 0x1000>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer2: timer@40058000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40058000 0x1000>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER2>; + clock-names = "timerclk"; + status = "disabled"; + }; + + pwm1: pwm@4005c000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005c000 0x4>; + clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; + status = "disabled"; + }; + + pwm2: pwm@4005c004 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005c004 0x4>; + clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; + status = "disabled"; + }; + + timer3: timer@40060000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40060000 0x1000>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER3>; + clock-names = "timerclk"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/dts/synquacer-sc2a11-caches.dtsi b/arch/arm/dts/synquacer-sc2a11-caches.dtsi new file mode 100644 index 0000000000..177ddf8c2b --- /dev/null +++ b/arch/arm/dts/synquacer-sc2a11-caches.dtsi @@ -0,0 +1,73 @@ +/** @file + * Copyright (c) 2018, Linaro Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-2-Clause-Patent + */ + +#define __L1(cpuref, l2ref) \ +cpuref { \ + i-cache-size = <0x8000>; \ + i-cache-line-size = <64>; \ + i-cache-sets = <256>; \ + d-cache-size = <0x8000>; \ + d-cache-line-size = <64>; \ + d-cache-sets = <128>; \ + l2-cache = <l2ref>; \ +}; + +#define __L2(idx) \ +L2_##idx: l2-cache##idx { \ + cache-size = <0x40000>; \ + cache-line-size = <64>; \ + cache-sets = <256>; \ + cache-unified; \ + next-level-cache = <&L3>; \ +}; + +/ { + __L2(0) + __L2(1) + __L2(2) + __L2(3) + __L2(4) + __L2(5) + __L2(6) + __L2(7) + __L2(8) + __L2(9) + __L2(10) + __L2(11) + + L3: l3-cache { + cache-level = <3>; + cache-size = <0x400000>; + cache-line-size = <64>; + cache-sets = <4096>; + cache-unified; + }; +}; + +__L1(&CPU0, &L2_0) +__L1(&CPU1, &L2_0) +__L1(&CPU2, &L2_1) +__L1(&CPU3, &L2_1) +__L1(&CPU4, &L2_2) +__L1(&CPU5, &L2_2) +__L1(&CPU6, &L2_3) +__L1(&CPU7, &L2_3) +__L1(&CPU8, &L2_4) +__L1(&CPU9, &L2_4) +__L1(&CPU10, &L2_5) +__L1(&CPU11, &L2_5) +__L1(&CPU12, &L2_6) +__L1(&CPU13, &L2_6) +__L1(&CPU14, &L2_7) +__L1(&CPU15, &L2_7) +__L1(&CPU16, &L2_8) +__L1(&CPU17, &L2_8) +__L1(&CPU18, &L2_9) +__L1(&CPU19, &L2_9) +__L1(&CPU20, &L2_10) +__L1(&CPU21, &L2_10) +__L1(&CPU22, &L2_11) +__L1(&CPU23, &L2_11) diff --git a/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi new file mode 100644 index 0000000000..2f13a42235 --- /dev/null +++ b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: BSD-2-Clause-Patent +// +// Copyright (c) 2021, Linaro Limited. All rights reserved. +// + +/ { + aliases { + spi_nor = &spi_nor; + i2c0 = &i2c0; + }; + + spi_nor: spi@54800000 { + compatible = "socionext,synquacer-spi"; + reg = <0x00 0x54800000 0x00 0x1000>; + interrupts = <0x00 0x9c 0x04 0x00 0x9d 0x04 0x00 0x9e 0x04>; + clocks = <&clk_alw_1_8>; + clock-names = "iHCLK"; + socionext,use-rtm; + socionext,set-aces; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + active_clk_edges; + chipselect_num = <1>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <31250000>; + spi-rx-bus-width = <0x1>; + spi-tx-bus-width = <0x1>; + }; + }; + + i2c0: i2c@51200000 { + compatible = "socionext,synquacer-i2c"; + reg = <0x0 0x51200000 0x0 0x1000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_i2c>; + clock-names = "pclk"; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + firmware { + optee { + status = "okay"; + }; + }; +}; + +&smmu { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&sdhci { + status = "okay"; +}; diff --git a/arch/arm/dts/synquacer-sc2a11-developerbox.dts b/arch/arm/dts/synquacer-sc2a11-developerbox.dts new file mode 100644 index 0000000000..42b6cbbb82 --- /dev/null +++ b/arch/arm/dts/synquacer-sc2a11-developerbox.dts @@ -0,0 +1,56 @@ +/** @file + * Copyright (c) 2017, Linaro Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-2-Clause-Patent + */ + +/dts-v1/; + +#include "synquacer-sc2a11.dtsi" + +#define KEY_POWER 116 + +/ { + model = "Socionext Developer Box"; + compatible = "socionext,developer-box", "socionext,synquacer"; + + gpio-keys { + compatible = "gpio-keys"; + interrupt-parent = <&exiu>; + + power { + label = "Power Button"; + linux,code = <KEY_POWER>; + interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; +}; + +#ifdef TPM2_ENABLE +&tpm { + status = "okay"; +}; +#endif + +&gpio { + gpio-line-names = "DSW3-PIN1", "DSW3-PIN2", "DSW3-PIN3", "DSW3-PIN4", + "DSW3-PIN5", "DSW3-PIN6", "DSW3-PIN7", "DSW3-PIN8", + "PSIN#", "PWROFF#", "GPIO-A", "GPIO-B", + "GPIO-C", "GPIO-D", "PCIE1EXTINT", "PCIE0EXTINT", + "PHY2-INT#", "PHY1-INT#", "GPIO-E", "GPIO-F", + "GPIO-G", "GPIO-H", "GPIO-I", "GPIO-J", + "GPIO-K", "GPIO-L", "PEC-PD26", "PEC-PD27", + "PEC-PD28", "PEC-PD29", "PEC-PD30", "PEC-PD31"; +}; + +&netsec { + phy-mode = "rgmii-id"; +}; + +&mdio_netsec { + phy_netsec: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; diff --git a/arch/arm/dts/synquacer-sc2a11.dtsi b/arch/arm/dts/synquacer-sc2a11.dtsi new file mode 100644 index 0000000000..1fe7d214b9 --- /dev/null +++ b/arch/arm/dts/synquacer-sc2a11.dtsi @@ -0,0 +1,595 @@ +/** @file + * Copyright (c) 2017 - 2018, Linaro Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-2-Clause-Patent + */ + +/* These are added for U-Boot to avoid compilation error */ +#define PcdNetsecEepromBase 0x08080000 +#define FixedPcdGet32(n) n + +#define GIC_SPI 0 +#define GIC_PPI 1 + +#define IRQ_TYPE_NONE 0 +#define IRQ_TYPE_EDGE_RISING 1 +#define IRQ_TYPE_EDGE_FALLING 2 +#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING) +#define IRQ_TYPE_LEVEL_HIGH 4 +#define IRQ_TYPE_LEVEL_LOW 8 + +#define GPIO_ACTIVE_HIGH 0 +#define GPIO_ACTIVE_LOW 1 + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &soc_uart0; + serial1 = &fuart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x200>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x201>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x300>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU7: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x301>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU8: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x400>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU9: cpu@401 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x401>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU10: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x500>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU11: cpu@501 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x501>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU12: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x600>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU13: cpu@601 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x601>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU14: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x700>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU15: cpu@701 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x701>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU16: cpu@800 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x800>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU17: cpu@801 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x801>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU18: cpu@900 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x900>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU19: cpu@901 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x901>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU20: cpu@a00 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0xa00>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU21: cpu@a01 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0xa01>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU22: cpu@b00 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0xb00>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + CPU23: cpu@b01 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0xb01>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU2>; + }; + core1 { + cpu = <&CPU3>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU6>; + }; + core1 { + cpu = <&CPU7>; + }; + }; + cluster4 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + }; + cluster5 { + core0 { + cpu = <&CPU10>; + }; + core1 { + cpu = <&CPU11>; + }; + }; + cluster6 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + }; + cluster7 { + core0 { + cpu = <&CPU14>; + }; + core1 { + cpu = <&CPU15>; + }; + }; + cluster8 { + core0 { + cpu = <&CPU16>; + }; + core1 { + cpu = <&CPU17>; + }; + }; + cluster9 { + core0 { + cpu = <&CPU18>; + }; + core1 { + cpu = <&CPU19>; + }; + }; + cluster10 { + core0 { + cpu = <&CPU20>; + }; + core1 { + cpu = <&CPU21>; + }; + }; + cluster11 { + core0 { + cpu = <&CPU22>; + }; + core1 { + cpu = <&CPU23>; + }; + }; + }; + }; + + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <400>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + local-timer-stop; + }; + }; + + gic: interrupt-controller@30000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x30000000 0x0 0x10000>, // GICD + <0x0 0x30400000 0x0 0x300000>, // GICR + <0x0 0x2c000000 0x0 0x2000>, // GICC + <0x0 0x2c010000 0x0 0x1000>, // GICH + <0x0 0x2c020000 0x0 0x10000>; // GICV + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + + its: gic-its@30020000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x30020000 0x0 0x20000>; + #msi-cells = <1>; + msi-controller; + socionext,synquacer-pre-its = <0x58000000 0x200000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, // secure + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, // non-secure + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, // virtual + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; // HYP + }; + + mmio-timer@2a810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x2a810000 0x0 0x10000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + frame@2a830000 { + frame-number = <0>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x2a830000 0x0 0x10000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clk_uart: refclk62500khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + clock-output-names = "uartclk"; + }; + + clk_apb: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + soc_uart0: uart@2a400000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x2a400000 0x0 0x1000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_uart>, <&clk_apb>; + clock-names = "uartclk", "apb_pclk"; + }; + + fuart: uart@51040000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x51040000 0x0 0x1000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_uart>, <&clk_apb>; + clock-names = "baudclk", "apb_pclk"; + reg-io-width = <4>; + reg-shift = <2>; + }; + + clk_netsec: refclk250mhz { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + netsec: ethernet@522d0000 { + compatible = "socionext,synquacer-netsec"; + reg = <0 0x522d0000 0x0 0x10000>, + <0 FixedPcdGet32 (PcdNetsecEepromBase) 0x0 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_netsec>; + clock-names = "phy_ref_clk"; + max-speed = <1000>; + max-frame-size = <9000>; + phy-handle = <&phy_netsec>; + dma-coherent; + + mdio_netsec: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + smmu: iommu@582c0000 { + compatible = "arm,mmu-500", "arm,smmu-v2"; + reg = <0x0 0x582c0000 0x0 0x10000>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + pcie0: pcie@60000000 { + compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; + device_type = "pci"; + reg = <0x0 0x60000000 0x0 0x7f00000>; + bus-range = <0x0 0x7e>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x1000000 0x00 0x00000000 0x00 0x67f00000 0x0 0x00010000>, + <0x2000000 0x00 0x68000000 0x00 0x68000000 0x0 0x08000000>, + <0x3000000 0x3e 0x00000000 0x3e 0x00000000 0x1 0x00000000>; + + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + + msi-map = <0x000 &its 0x0 0x7f00>; + dma-coherent; + status = "disabled"; + }; + + pcie1: pcie@70000000 { + compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; + device_type = "pci"; + reg = <0x0 0x70000000 0x0 0x7f00000>; + bus-range = <0x0 0x7e>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x1000000 0x00 0x00000000 0x00 0x77f00000 0x0 0x00010000>, + <0x2000000 0x00 0x78000000 0x00 0x78000000 0x0 0x08000000>, + <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>; + + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + + msi-map = <0x0 &its 0x10000 0x7f00>; + dma-coherent; + status = "disabled"; + }; + + gpio: gpio@51000000 { + compatible = "socionext,synquacer-gpio", "fujitsu,mb86s70-gpio"; + reg = <0x0 0x51000000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clk_apb>; + base = <0>; + }; + + exiu: interrupt-controller@510c0000 { + compatible = "socionext,synquacer-exiu"; + reg = <0x0 0x510c0000 0x0 0x20>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + socionext,spi-base = <112>; + }; + + clk_alw_b_0: bclk200 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "sd_bclk"; + }; + + clk_alw_c_0: sd4clk800 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <800000000>; + clock-output-names = "sd_sd4clk"; + }; + + sdhci: sdhci@52300000 { + compatible = "socionext,synquacer-sdhci", "fujitsu,mb86s70-sdhci-3.0"; + reg = <0 0x52300000 0x0 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + cap-mmc-highspeed; + fujitsu,cmd-dat-delay-select; + clocks = <&clk_alw_c_0 &clk_alw_b_0>; + clock-names = "core", "iface"; + dma-coherent; + status = "disabled"; + }; + + clk_alw_1_8: spi_ihclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "iHCLK"; + }; + + spi: spi@54810000 { + compatible = "socionext,synquacer-spi"; + reg = <0x0 0x54810000 0x0 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_alw_1_8>; + clock-names = "iHCLK"; + socionext,use-rtm; + socionext,set-aces; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + clk_i2c: i2c_pclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + clock-output-names = "pclk"; + }; + + i2c: i2c@51210000 { + compatible = "socionext,synquacer-i2c"; + reg = <0x0 0x51210000 0x0 0x1000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_i2c>; + clock-names = "pclk"; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + tpm: tpm_tis@10000000 { + compatible = "socionext,synquacer-tpm-mmio"; + reg = <0x0 0x10000000 0x0 0x5000>; + status = "disabled"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + }; +}; + +#include "synquacer-sc2a11-caches.dtsi" diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index 0836091af2..45e46f9946 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -12,8 +12,8 @@ /* Basic CPU architecture */ /* UART configuration */ -#if (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \ - (CONFIG_SYS_LPC32XX_UART == 7) +#if (CONFIG_CONS_INDEX == 1) || (CONFIG_CONS_INDEX == 2) || \ + (CONFIG_CONS_INDEX == 7) #if !defined(CONFIG_LPC32XX_HSUART) #define CONFIG_LPC32XX_HSUART #endif diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 7609367884..650783ae73 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -1,10 +1,4 @@ -#if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) && \ - !defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM68360) && \ - !defined(CONFIG_ARCH_BCM6858) && !defined(CONFIG_ARCH_BCM63158) && \ - !defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_ASPEED) && \ - !defined(CONFIG_ARCH_U8500) && !defined(CONFIG_CORTINA_PLATFORM) && \ - !defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE) && \ - !defined(CONFIG_ARCH_QEMU) +#ifdef CONFIG_GPIO_EXTRA_HEADER #include <asm/arch/gpio.h> #endif #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig index 986ad738ac..185bda41c2 100644 --- a/arch/arm/mach-lpc32xx/Kconfig +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -12,9 +12,13 @@ config TARGET_DEVKIT3250 config TARGET_WORK_92105 bool "Work Microwave Work_92105" +config TARGET_EA_LPC3250DEVKITV2 + bool "Embedded Artists LPC3250 Developer's Kit v2" + endchoice source "board/timll/devkit3250/Kconfig" source "board/work-microwave/work_92105/Kconfig" +source "board/ea/ea-lpc3250devkitv2/Kconfig" endif diff --git a/arch/arm/mach-lpc32xx/devices.c b/arch/arm/mach-lpc32xx/devices.c index e1e2e0d094..0a4fef295a 100644 --- a/arch/arm/mach-lpc32xx/devices.c +++ b/arch/arm/mach-lpc32xx/devices.c @@ -23,8 +23,7 @@ void lpc32xx_uart_init(unsigned int uart_id) return; /* Disable loopback mode, if it is set by S1L bootloader */ - clrbits_le32(&ctrl->loop, - UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART)); + clrbits_le32(&ctrl->loop, UART_LOOPBACK(uart_id)); if (uart_id < 3 || uart_id > 6) return; diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c b/arch/arm/mach-snapdragon/clock-snapdragon.c index fbe0b5212f..2b76371718 100644 --- a/arch/arm/mach-snapdragon/clock-snapdragon.c +++ b/arch/arm/mach-snapdragon/clock-snapdragon.c @@ -56,15 +56,15 @@ void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk) } while ((val != BRANCH_ON_VAL) && (val != BRANCH_NOC_FSM_ON_VAL)); } -#define APPS_CMD_RGCR_UPDATE BIT(0) +#define APPS_CMD_RCGR_UPDATE BIT(0) -/* Update clock command via CMD_RGCR */ -void clk_bcr_update(phys_addr_t apps_cmd_rgcr) +/* Update clock command via CMD_RCGR */ +void clk_bcr_update(phys_addr_t apps_cmd_rcgr) { - setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE); + setbits_le32(apps_cmd_rcgr, APPS_CMD_RCGR_UPDATE); /* Wait for frequency to be updated. */ - while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE) + while (readl(apps_cmd_rcgr) & APPS_CMD_RCGR_UPDATE) ; } diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h index 520e2e6bd7..d9a3b1af98 100644 --- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h +++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h @@ -8,7 +8,7 @@ #define _MACH_SYSMAP_APQ8016_H #define GICD_BASE (0x0b000000) -#define GICC_BASE (0x0a20c000) +#define GICC_BASE (0x0b002000) /* Clocks: (from CLK_CTL_BASE) */ #define GPLL0_STATUS (0x2101C) diff --git a/arch/powerpc/cpu/mpc83xx/pci.c b/arch/powerpc/cpu/mpc83xx/pci.c index 5c289d0022..507ab3417b 100644 --- a/arch/powerpc/cpu/mpc83xx/pci.c +++ b/arch/powerpc/cpu/mpc83xx/pci.c @@ -27,6 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; static struct pci_controller pci_hose[MAX_BUSES]; static int pci_num_buses; +#if !defined(CONFIG_DM_PCI) static void pci_init_bus(int bus, struct pci_region *reg) { volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; @@ -184,6 +185,7 @@ void mpc83xx_pcislave_unlock(int bus) hose->last_busno = pci_hose_scan(hose); } #endif +#endif /* CONFIG_DM_PCI */ #if defined(CONFIG_OF_LIBFDT) void ft_pci_setup(void *blob, struct bd_info *bd) diff --git a/arch/powerpc/dts/mpc8379erdb.dts b/arch/powerpc/dts/mpc8379erdb.dts index b1881b161c..2e7c8f103c 100644 --- a/arch/powerpc/dts/mpc8379erdb.dts +++ b/arch/powerpc/dts/mpc8379erdb.dts @@ -69,6 +69,58 @@ device_type = "ipic"; }; + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + fixed-link = <1 0 1000 0 0>; + phy-handle = <&phy>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x520 0x20>; + + phy: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + }; + }; + + pci0: pci@e0008300 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + reg = <0x0 0xe0008300 0x0 0x00000fff>; + compatible = "fsl,mpc837x-pci"; + clock-frequency = <0>; + }; + }; }; diff --git a/board/armltd/integrator/Makefile b/board/armltd/integrator/Makefile index 8c906e3f07..107e59bf0f 100644 --- a/board/armltd/integrator/Makefile +++ b/board/armltd/integrator/Makefile @@ -10,5 +10,4 @@ obj-y := lowlevel_init.o obj-y += integrator.o -obj-$(CONFIG_PCI) += pci.o obj-y += timer.o diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index 3e864e8e7a..388795809d 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -181,7 +181,6 @@ int board_eth_init(struct bd_info *bis) #ifdef CONFIG_SMC91111 rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); #endif - rc += pci_eth_init(bis); return rc; } #endif diff --git a/board/armltd/integrator/pci.c b/board/armltd/integrator/pci.c deleted file mode 100644 index 28efc33f1f..0000000000 --- a/board/armltd/integrator/pci.c +++ /dev/null @@ -1,462 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, <philippe.robin@arm.com> - * - * (C) Copyright 2011 - * Linaro - * Linus Walleij <linus.walleij@linaro.org> - */ -#include <common.h> -#include <init.h> -#include <log.h> -#include <pci.h> -#include <asm/io.h> -#include <linux/bug.h> -#include <linux/delay.h> -#include "integrator-sc.h" -#include "pci_v3.h" - -#define INTEGRATOR_BOOT_ROM_BASE 0x20000000 -#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 - -/* - * These are in the physical addresses on the CPU side, i.e. - * where we read and write stuff - you don't want to try to - * move these around - */ -#define PHYS_PCI_MEM_BASE 0x40000000 -#define PHYS_PCI_IO_BASE 0x60000000 /* PCI I/O space base */ -#define PHYS_PCI_CONFIG_BASE 0x61000000 -#define PHYS_PCI_V3_BASE 0x62000000 /* V360EPC registers */ -#define SZ_256M 0x10000000 - -/* - * These are in the PCI BUS address space - * Set to 0x00000000 in the Linux kernel, 0x40000000 in Boot monitor - * we follow the example of the kernel, because that is the address - * range that devices actually use - what would they be doing at - * 0x40000000? - */ -#define PCI_BUS_NONMEM_START 0x00000000 -#define PCI_BUS_NONMEM_SIZE SZ_256M - -#define PCI_BUS_PREMEM_START (PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE) -#define PCI_BUS_PREMEM_SIZE SZ_256M - -#if PCI_BUS_NONMEM_START & 0x000fffff -#error PCI_BUS_NONMEM_START must be megabyte aligned -#endif -#if PCI_BUS_PREMEM_START & 0x000fffff -#error PCI_BUS_PREMEM_START must be megabyte aligned -#endif - -/* - * Initialize PCI Devices, report devices found. - */ - -#ifndef CONFIG_PCI_PNP -#define PCI_ENET0_IOADDR 0x60000000 /* First card in PCI I/O space */ -#define PCI_ENET0_MEMADDR 0x40000000 /* First card in PCI memory space */ -static struct pci_config_table pci_integrator_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, - { } -}; -#endif /* CONFIG_PCI_PNP */ - -/* V3 access routines */ -#define v3_writeb(o, v) __raw_writeb(v, PHYS_PCI_V3_BASE + (unsigned int)(o)) -#define v3_readb(o) (__raw_readb(PHYS_PCI_V3_BASE + (unsigned int)(o))) - -#define v3_writew(o, v) __raw_writew(v, PHYS_PCI_V3_BASE + (unsigned int)(o)) -#define v3_readw(o) (__raw_readw(PHYS_PCI_V3_BASE + (unsigned int)(o))) - -#define v3_writel(o, v) __raw_writel(v, PHYS_PCI_V3_BASE + (unsigned int)(o)) -#define v3_readl(o) (__raw_readl(PHYS_PCI_V3_BASE + (unsigned int)(o))) - -static unsigned long v3_open_config_window(pci_dev_t bdf, int offset) -{ - unsigned int address, mapaddress; - unsigned int busnr = PCI_BUS(bdf); - unsigned int devfn = PCI_FUNC(bdf); - - /* - * Trap out illegal values - */ - if (offset > 255) - BUG(); - if (busnr > 255) - BUG(); - if (devfn > 255) - BUG(); - - if (busnr == 0) { - /* - * Linux calls the thing U-Boot calls "DEV" "SLOT" - * instead, but it's the same 5 bits - */ - int slot = PCI_DEV(bdf); - - /* - * local bus segment so need a type 0 config cycle - * - * build the PCI configuration "address" with one-hot in - * A31-A11 - * - * mapaddress: - * 3:1 = config cycle (101) - * 0 = PCI A1 & A0 are 0 (0) - */ - address = PCI_FUNC(bdf) << 8; - mapaddress = V3_LB_MAP_TYPE_CONFIG; - - if (slot > 12) - /* - * high order bits are handled by the MAP register - */ - mapaddress |= 1 << (slot - 5); - else - /* - * low order bits handled directly in the address - */ - address |= 1 << (slot + 11); - } else { - /* - * not the local bus segment so need a type 1 config cycle - * - * address: - * 23:16 = bus number - * 15:11 = slot number (7:3 of devfn) - * 10:8 = func number (2:0 of devfn) - * - * mapaddress: - * 3:1 = config cycle (101) - * 0 = PCI A1 & A0 from host bus (1) - */ - mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN; - address = (busnr << 16) | (devfn << 8); - } - - /* - * Set up base0 to see all 512Mbytes of memory space (not - * prefetchable), this frees up base1 for re-use by - * configuration memory - */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | - V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE); - - /* - * Set up base1/map1 to point into configuration space. - */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_CONFIG_BASE) | - V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, mapaddress); - - return PHYS_PCI_CONFIG_BASE + address + offset; -} - -static void v3_close_config_window(void) -{ - /* - * Reassign base1 for use by prefetchable PCI memory - */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | - V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | - V3_LB_MAP_TYPE_MEM_MULTIPLE); - - /* - * And shrink base0 back to a 256M window (NOTE: MAP0 already correct) - */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); -} - -static int pci_integrator_read_byte(struct pci_controller *hose, pci_dev_t bdf, - int offset, unsigned char *val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - *val = __raw_readb(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_read__word(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned short *val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - *val = __raw_readw(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_read_dword(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned int *val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - *val = __raw_readl(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_write_byte(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned char val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - __raw_writeb((u8)val, addr); - __raw_readb(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_write_word(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned short val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - __raw_writew((u8)val, addr); - __raw_readw(addr); - v3_close_config_window(); - return 0; -} - -static int pci_integrator_write_dword(struct pci_controller *hose, - pci_dev_t bdf, int offset, - unsigned int val) -{ - unsigned long addr; - - addr = v3_open_config_window(bdf, offset); - __raw_writel((u8)val, addr); - __raw_readl(addr); - v3_close_config_window(); - return 0; -} - -struct pci_controller integrator_hose = { -#ifndef CONFIG_PCI_PNP - config_table: pci_integrator_config_table, -#endif -}; - -void pci_init_board(void) -{ - struct pci_controller *hose = &integrator_hose; - u16 val; - - /* setting this register will take the V3 out of reset */ - __raw_writel(SC_PCI_PCIEN, SC_PCI); - - /* Wait for 230 ms (from spec) before accessing any V3 registers */ - mdelay(230); - - /* Now write the Base I/O Address Word to PHYS_PCI_V3_BASE + 0x6E */ - v3_writew(V3_LB_IO_BASE, (PHYS_PCI_V3_BASE >> 16)); - - /* Wait for the mailbox to settle */ - do { - v3_writeb(V3_MAIL_DATA, 0xAA); - v3_writeb(V3_MAIL_DATA + 4, 0x55); - } while (v3_readb(V3_MAIL_DATA) != 0xAA || - v3_readb(V3_MAIL_DATA + 4) != 0x55); - - /* Make sure that V3 register access is not locked, if it is, unlock it */ - if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK) - v3_writew(V3_SYSTEM, 0xA05F); - - /* - * Ensure that the slave accesses from PCI are disabled while we - * setup memory windows - */ - val = v3_readw(V3_PCI_CMD); - val &= ~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN); - v3_writew(V3_PCI_CMD, val); - - /* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */ - val = v3_readw(V3_SYSTEM); - val &= ~V3_SYSTEM_M_RST_OUT; - v3_writew(V3_SYSTEM, val); - - /* Make all accesses from PCI space retry until we're ready for them */ - val = v3_readw(V3_PCI_CFG); - val |= V3_PCI_CFG_M_RETRY_EN; - v3_writew(V3_PCI_CFG, val); - - /* - * Set up any V3 PCI Configuration Registers that we absolutely have to. - * LB_CFG controls Local Bus protocol. - * Enable LocalBus byte strobes for READ accesses too. - * set bit 7 BE_IMODE and bit 6 BE_OMODE - */ - val = v3_readw(V3_LB_CFG); - val |= 0x0C0; - v3_writew(V3_LB_CFG, val); - - /* PCI_CMD controls overall PCI operation. Enable PCI bus master. */ - val = v3_readw(V3_PCI_CMD); - val |= V3_COMMAND_M_MASTER_EN; - v3_writew(V3_PCI_CMD, val); - - /* - * PCI_MAP0 controls where the PCI to CPU memory window is on - * Local Bus - */ - v3_writel(V3_PCI_MAP0, - (INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512MB | - V3_PCI_MAP_M_REG_EN | - V3_PCI_MAP_M_ENABLE)); - - /* PCI_BASE0 is the PCI address of the start of the window */ - v3_writel(V3_PCI_BASE0, INTEGRATOR_BOOT_ROM_BASE); - - /* PCI_MAP1 is LOCAL address of the start of the window */ - v3_writel(V3_PCI_MAP1, - (INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1GB | - V3_PCI_MAP_M_REG_EN | - V3_PCI_MAP_M_ENABLE)); - - /* PCI_BASE1 is the PCI address of the start of the window */ - v3_writel(V3_PCI_BASE1, INTEGRATOR_HDR0_SDRAM_BASE); - - /* - * Set up memory the windows from local bus memory into PCI - * configuration, I/O and Memory regions. - * PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. - */ - v3_writew(V3_LB_BASE2, - v3_addr_to_lb_map(PHYS_PCI_IO_BASE) | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP2, 0); - - /* PCI Configuration, use LB_BASE1/LB_MAP1. */ - - /* - * PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 - * Map first 256Mbytes as non-prefetchable via BASE0/MAP0 - */ - v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP0, - v3_addr_to_lb_map(PCI_BUS_NONMEM_START) | V3_LB_MAP_TYPE_MEM); - - /* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */ - v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) | - V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH | - V3_LB_BASE_ENABLE); - v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) | - V3_LB_MAP_TYPE_MEM_MULTIPLE); - - /* Dump PCI to local address space mappings */ - debug("LB_BASE0 = %08x\n", v3_readl(V3_LB_BASE0)); - debug("LB_MAP0 = %04x\n", v3_readw(V3_LB_MAP0)); - debug("LB_BASE1 = %08x\n", v3_readl(V3_LB_BASE1)); - debug("LB_MAP1 = %04x\n", v3_readw(V3_LB_MAP1)); - debug("LB_BASE2 = %04x\n", v3_readw(V3_LB_BASE2)); - debug("LB_MAP2 = %04x\n", v3_readw(V3_LB_MAP2)); - debug("LB_IO_BASE = %04x\n", v3_readw(V3_LB_IO_BASE)); - - /* - * Allow accesses to PCI Configuration space and set up A1, A0 for - * type 1 config cycles - */ - val = v3_readw(V3_PCI_CFG); - val &= ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1); - val |= V3_PCI_CFG_M_AD_LOW0; - v3_writew(V3_PCI_CFG, val); - - /* now we can allow incoming PCI MEMORY accesses */ - val = v3_readw(V3_PCI_CMD); - val |= V3_COMMAND_M_MEM_EN; - v3_writew(V3_PCI_CMD, val); - - /* - * Set RST_OUT to take the PCI bus is out of reset, PCI devices can - * now initialise. - */ - val = v3_readw(V3_SYSTEM); - val |= V3_SYSTEM_M_RST_OUT; - v3_writew(V3_SYSTEM, val); - - /* Lock the V3 system register so that no one else can play with it */ - val = v3_readw(V3_SYSTEM); - val |= V3_SYSTEM_M_LOCK; - v3_writew(V3_SYSTEM, val); - - /* - * Configure and register the PCI hose - */ - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* System memory space, window 0 256 MB non-prefetchable */ - pci_set_region(hose->regions + 0, - PCI_BUS_NONMEM_START, PHYS_PCI_MEM_BASE, - SZ_256M, - PCI_REGION_MEM); - - /* System memory space, window 1 256 MB prefetchable */ - pci_set_region(hose->regions + 1, - PCI_BUS_PREMEM_START, PHYS_PCI_MEM_BASE + SZ_256M, - SZ_256M, - PCI_REGION_MEM | - PCI_REGION_PREFETCH); - - /* PCI I/O space */ - pci_set_region(hose->regions + 2, - 0x00000000, PHYS_PCI_IO_BASE, 0x01000000, - PCI_REGION_IO); - - /* PCI Memory - config space */ - pci_set_region(hose->regions + 3, - 0x00000000, PHYS_PCI_CONFIG_BASE, 0x01000000, - PCI_REGION_MEM); - /* PCI V3 regs */ - pci_set_region(hose->regions + 4, - 0x00000000, PHYS_PCI_V3_BASE, 0x01000000, - PCI_REGION_MEM); - - hose->region_count = 5; - - pci_set_ops(hose, - pci_integrator_read_byte, - pci_integrator_read__word, - pci_integrator_read_dword, - pci_integrator_write_byte, - pci_integrator_write_word, - pci_integrator_write_dword); - - pci_register_hose(hose); - - pciauto_config_init(hose); - pciauto_config_device(hose, 0); - - hose->last_busno = pci_hose_scan(hose); -} diff --git a/board/armltd/integrator/pci_v3.h b/board/armltd/integrator/pci_v3.h deleted file mode 100644 index 8d09e6966d..0000000000 --- a/board/armltd/integrator/pci_v3.h +++ /dev/null @@ -1,187 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * arch/arm/include/asm/hardware/pci_v3.h - * - * Internal header file PCI V3 chip - * - * Copyright (C) ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - */ -#ifndef ASM_ARM_HARDWARE_PCI_V3_H -#define ASM_ARM_HARDWARE_PCI_V3_H - -/* ------------------------------------------------------------------------------- - * V3 Local Bus to PCI Bridge definitions - * ------------------------------------------------------------------------------- - * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 - * All V3 register names are prefaced by V3_ to avoid clashing with any other - * PCI definitions. Their names match the user's manual. - * - * I'm assuming that I20 is disabled. - * - */ -#define V3_PCI_VENDOR 0x00000000 -#define V3_PCI_DEVICE 0x00000002 -#define V3_PCI_CMD 0x00000004 -#define V3_PCI_STAT 0x00000006 -#define V3_PCI_CC_REV 0x00000008 -#define V3_PCI_HDR_CFG 0x0000000C -#define V3_PCI_IO_BASE 0x00000010 -#define V3_PCI_BASE0 0x00000014 -#define V3_PCI_BASE1 0x00000018 -#define V3_PCI_SUB_VENDOR 0x0000002C -#define V3_PCI_SUB_ID 0x0000002E -#define V3_PCI_ROM 0x00000030 -#define V3_PCI_BPARAM 0x0000003C -#define V3_PCI_MAP0 0x00000040 -#define V3_PCI_MAP1 0x00000044 -#define V3_PCI_INT_STAT 0x00000048 -#define V3_PCI_INT_CFG 0x0000004C -#define V3_LB_BASE0 0x00000054 -#define V3_LB_BASE1 0x00000058 -#define V3_LB_MAP0 0x0000005E -#define V3_LB_MAP1 0x00000062 -#define V3_LB_BASE2 0x00000064 -#define V3_LB_MAP2 0x00000066 -#define V3_LB_SIZE 0x00000068 -#define V3_LB_IO_BASE 0x0000006E -#define V3_FIFO_CFG 0x00000070 -#define V3_FIFO_PRIORITY 0x00000072 -#define V3_FIFO_STAT 0x00000074 -#define V3_LB_ISTAT 0x00000076 -#define V3_LB_IMASK 0x00000077 -#define V3_SYSTEM 0x00000078 -#define V3_LB_CFG 0x0000007A -#define V3_PCI_CFG 0x0000007C -#define V3_DMA_PCI_ADR0 0x00000080 -#define V3_DMA_PCI_ADR1 0x00000090 -#define V3_DMA_LOCAL_ADR0 0x00000084 -#define V3_DMA_LOCAL_ADR1 0x00000094 -#define V3_DMA_LENGTH0 0x00000088 -#define V3_DMA_LENGTH1 0x00000098 -#define V3_DMA_CSR0 0x0000008B -#define V3_DMA_CSR1 0x0000009B -#define V3_DMA_CTLB_ADR0 0x0000008C -#define V3_DMA_CTLB_ADR1 0x0000009C -#define V3_DMA_DELAY 0x000000E0 -#define V3_MAIL_DATA 0x000000C0 -#define V3_PCI_MAIL_IEWR 0x000000D0 -#define V3_PCI_MAIL_IERD 0x000000D2 -#define V3_LB_MAIL_IEWR 0x000000D4 -#define V3_LB_MAIL_IERD 0x000000D6 -#define V3_MAIL_WR_STAT 0x000000D8 -#define V3_MAIL_RD_STAT 0x000000DA -#define V3_QBA_MAP 0x000000DC - -/* PCI COMMAND REGISTER bits - */ -#define V3_COMMAND_M_FBB_EN (1 << 9) -#define V3_COMMAND_M_SERR_EN (1 << 8) -#define V3_COMMAND_M_PAR_EN (1 << 6) -#define V3_COMMAND_M_MASTER_EN (1 << 2) -#define V3_COMMAND_M_MEM_EN (1 << 1) -#define V3_COMMAND_M_IO_EN (1 << 0) - -/* SYSTEM REGISTER bits - */ -#define V3_SYSTEM_M_RST_OUT (1 << 15) -#define V3_SYSTEM_M_LOCK (1 << 14) - -/* PCI_CFG bits - */ -#define V3_PCI_CFG_M_I2O_EN (1 << 15) -#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) -#define V3_PCI_CFG_M_IO_DIS (1 << 13) -#define V3_PCI_CFG_M_EN3V (1 << 12) -#define V3_PCI_CFG_M_RETRY_EN (1 << 10) -#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) -#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) - -/* PCI_BASE register bits (PCI -> Local Bus) - */ -#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 -#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 -#define V3_PCI_BASE_M_PREFETCH (1 << 3) -#define V3_PCI_BASE_M_TYPE (3 << 1) -#define V3_PCI_BASE_M_IO (1 << 0) - -/* PCI MAP register bits (PCI -> Local bus) - */ -#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 -#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) -#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) -#define V3_PCI_MAP_M_SWAP (3 << 8) -#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 -#define V3_PCI_MAP_M_REG_EN (1 << 1) -#define V3_PCI_MAP_M_ENABLE (1 << 0) - -#define V3_PCI_MAP_M_ADR_SIZE_1MB (0 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_2MB (1 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_4MB (2 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_8MB (3 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_16MB (4 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_32MB (5 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_64MB (6 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_128MB (7 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_256MB (8 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_512MB (9 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_1GB (10 << 4) -#define V3_PCI_MAP_M_ADR_SIZE_2GB (11 << 4) - -/* - * LB_BASE0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_BASE_ADR_BASE 0xfff00000 -#define V3_LB_BASE_SWAP (3 << 8) -#define V3_LB_BASE_ADR_SIZE (15 << 4) -#define V3_LB_BASE_PREFETCH (1 << 3) -#define V3_LB_BASE_ENABLE (1 << 0) - -#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) -#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) -#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) -#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) -#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) -#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) -#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) -#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) -#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) -#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) -#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) -#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) - -#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) - -/* - * LB_MAP0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_MAP_MAP_ADR 0xfff0 -#define V3_LB_MAP_TYPE (7 << 1) -#define V3_LB_MAP_AD_LOW_EN (1 << 0) - -#define V3_LB_MAP_TYPE_IACK (0 << 1) -#define V3_LB_MAP_TYPE_IO (1 << 1) -#define V3_LB_MAP_TYPE_MEM (3 << 1) -#define V3_LB_MAP_TYPE_CONFIG (5 << 1) -#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) - -/* PCI MAP register bits (PCI -> Local bus) */ -#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) - -/* - * LB_BASE2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_BASE2_ADR_BASE 0xff00 -#define V3_LB_BASE2_SWAP (3 << 6) -#define V3_LB_BASE2_ENABLE (1 << 0) - -#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) - -/* - * LB_MAP2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_MAP2_MAP_ADR 0xff00 - -#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) - -#endif diff --git a/board/ea/ea-lpc3250devkitv2/Kconfig b/board/ea/ea-lpc3250devkitv2/Kconfig new file mode 100644 index 0000000000..368ce027e6 --- /dev/null +++ b/board/ea/ea-lpc3250devkitv2/Kconfig @@ -0,0 +1,15 @@ +if TARGET_EA_LPC3250DEVKITV2 + +config SYS_BOARD + default "ea-lpc3250devkitv2" + +config SYS_VENDOR + default "ea" + +config SYS_SOC + default "lpc32xx" + +config SYS_CONFIG_NAME + default "ea-lpc3250devkitv2" + +endif diff --git a/board/ea/ea-lpc3250devkitv2/MAINTAINERS b/board/ea/ea-lpc3250devkitv2/MAINTAINERS new file mode 100644 index 0000000000..b4b9362f5b --- /dev/null +++ b/board/ea/ea-lpc3250devkitv2/MAINTAINERS @@ -0,0 +1,9 @@ +EMBEDDED ARTISTS LPC3250 DEVKIT v2 +M: Trevor Woerner <twoerner@gmail.com> +S: Maintained +F: board/ea/ea-lpc3250devkitv2 +F: include/configs/ea-lpc3250devkitv2.h +F: configs/ea-lpc3250devkitv2_defconfig +F: arch/arm/dts/lpc32xx.dtsi +F: arch/arm/dts/lpc3250-ea3250.dts +F: arch/arm/dts/lpc3250-ea3250-u-boot.dtsi diff --git a/board/ea/ea-lpc3250devkitv2/Makefile b/board/ea/ea-lpc3250devkitv2/Makefile new file mode 100644 index 0000000000..a4a40b6d4f --- /dev/null +++ b/board/ea/ea-lpc3250devkitv2/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2021 Trevor Woerner <twoerner@gmail.com> + +obj-y += ea-lpc3250devkitv2.o diff --git a/board/ea/ea-lpc3250devkitv2/README.rst b/board/ea/ea-lpc3250devkitv2/README.rst new file mode 100644 index 0000000000..1b78000331 --- /dev/null +++ b/board/ea/ea-lpc3250devkitv2/README.rst @@ -0,0 +1,186 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +ToC: +- Introduction +- Booting +- Debugging +- i2c + + +Introduction +============ +The Embedded Artists LPC3250 Developer's Kit v2 features the LPC3250 SoC +which is based on the ARM926EJ-S CPU. The kit features a base board and +a removable OEM board which features the SoC. Details, schematics, and +documentation are available from the Embedded Artists product website: + + https://www.embeddedartists.com/products/lpc3250-developers-kit-v2/ + +The base board includes:: +- 200 pos, 0.6mm pitch SODIMM connector for OEM Board +- LCD expansion connector with control signals for touch screen interface +- Expansion connector with all OEM Board signals +- Ethernet connector (RJ45) +- CAN interface & connector (provision for second CAN interface, but not mounted) +- MMC/SD interface & connector +- USB1: OTG or Host interface & connector +- USB2: Device or Host interface & connector +- Provision for NXP JN5148 RF module (former Jennic) interface (RF module not included) +- Full modem RS232 (cannot be fully used on 32-bit databus OEM boards) +- RS422/485 interface & connector +- Provision for IrDA transceiver interface (transceiver not mounted) +- I2S audio codec (mic in, line in, line out, headphone out) +- SWD/JTAG connector +- Trace connector and pads for ETM connector +- Serial Expansion Connector, 14-pos connector with UART/I2C/SPI/GPIO pins +- Power supply, either via USB or external 5V DC +- Optional coin cell battery for RTC and LED on ALARM output (coin cell not included) +- OEM Board current measuring +- Parallel NOR flash on external memory bus +- 16-bit register and LEDs on external memory bus +- 5-key joystick +- LM75 temperature sensor (I2C connected) +- 5 push-button keys (four via I2C and one on ISP-ENABLE) +- 9 LEDs (8 via I2C and one on ISP-ENABLE) +- Trimming potentiometer to analog input +- USB-to-serial bridge on UART #0 (FT232R) and ISP functionality +- Reset push-button and LED +- Speaker output on analog output from OEM Board, or from I2S audio codec +- 160x150 mm in size + +The OEM board:: +- ARMv5 ARM926EJ-S @ 266 MHz with hard-float VFPv2 +- 256 KByte IRAM, 64 MByte SDRAM +- 128 MByte NAND flash +- 4 MByte NOR Flash +- Graphics Output: Parallel RGB +- Hardware 2D/3D Graphic: No +- Hardware Video: SW only +- Graphics input: No +- Audio: I2S +- Ethernet: 10/100 Mbps +- USB: 1x FS USB 2.0 OTG +- Wi-Fi: No +- FlexIO: No +- Serial: 2x I2C, 2x SPI, 7x UART +- ADC/PWM: 3 ch (10-bit) / 2 ch +- SD: MCI +- PCIe: No +- Serial ATA: No +- Size: 68 x 48 mm +- Connector: 200 pos SODIMM + + +Booting +======= +The processor will start its code execution from an internal ROM, +containing the boot code. This boot loader can load code from one of four +external sources to internal RAM (IRAM) at address 0x0:: +- UART5 +- SSP0 (in SPI mode) +- EMC Static CS0 memory +- NAND FLASH + +The ROM boot loader loads code as a single contiguous block at a maximum +size of 56 kByte. Programs larger than this size must be loaded in more +steps, for example, by a secondary boot loader. + +Kickstart Loader +---------------- +By default the Embedded Artists LPC3250 OEM Board is programmed with the +kickstart loader in block 0 of the NAND flash. The responsibility of this +loader is to load an application stored in block 1 and onwards of the NAND +flash. The kickstart loader will load the application into internal RAM +(IRAM) at address 0x0. + +Stage 1 Loader (s1l) +-------------------- +By default the Embedded Artists LPC3250 OEM Board is programmed with the +stage 1 loader (s1l) in block 1 of the NAND flash. This application will be +loaded by the kickstart loader when the LPC3250 OEM Board powers up. The +S1L loader will initialize the board, such as clocks and external memory +and then start a console where you can give input commands to the loader. +S1L offers the following booting options:: +- MMC/SD card +- UART5 +- NAND Flash + +U-Boot with kickstart+s1l +------------------------- +Out of the box, the easiest way to get U-Boot running on the EA LPC3250 +DevKit v2 board is to build the ea-lpc3250devkitv2_defconfig, copy the +resulting u-boot.bin to a vfat-formatted MMC/SD card, insert the MMC/SD card +into the MMC/SD card slot on the board, reset the board (SW1), and:: + + Embedded Artist 3250 Board (S1L 2.0) + Build date: Oct 31 2016 13:00:37 + + EA3250>load blk u-boot.bin raw 0x83000000 + File loaded successfully + + EA3250>exec 0x83000000 + + +Debugging +========= +JTAG debugging of the Embedded Artists LPC3250 Developer's Kit v2 board is +easy thanks to the included/populated 20-pin JTAG port on the main board (J8). +openocd 0.11 has been used with this board along with the ARM-USB-OCD-H JTAG +dongle from Olimex successfully as follows: + + # openocd \ + -f interface/ftdi/olimex-arm-usb-ocd-h.cfg \ + -f board/phytec_lpc3250.cfg + + +i2c +=== +Some of the LEDs on the board are connected via an I/O Expander (PCA9532) that +is attached to the i2c1 bus. Here is a sample session of toggling some of +these LEDs via i2c in U-Boot: + +show the existing i2c busses: + EA-LPC3250v2=> i2c bus + Bus 0: i2c@300 + Bus 1: i2c@400a0000 + Bus 2: i2c@400a8000 + +set i2c1 as the current bus: + EA-LPC3250v2=> i2c dev 1 + Setting bus to 1 + +see what potential devices are found with rudimentary probing on i2c1: + EA-LPC3250v2=> i2c probe + Valid chip addresses: 1A 1D 48 50 57 60 66 6E + +According to the schematics the i2c slave address of the PCA9532 is 0x60. + +dump all of the 10 registers from the I/O Expander; NOTE that the 0x10 in the +command specifies the self-incrementing mode of the PCA9532; also NOTE that +the values repeat themseves to fill out a full 16 bytes: + EA-LPC3250v2=> i2c md 0x60 0x10 10 + 0010: 00 ff 00 80 00 80 00 00 00 00 4f ff 00 80 00 80 ..........O..... + +turn on LEDs 23, 25, 27, and 29 (green): + EA-LPC3250v2=> i2c mw 0x60 9 0x55 + +turn on LEDs 22, 24, 26, and 28 (red): + EA-LPC3250v2=> i2c mw 0x60 8 0x55 + +dim the green LEDs (23, 25, 27, 29): + EA-LPC3250v2=> i2c mw 0x60 3 0x20 + EA-LPC3250v2=> i2c mw 0x60 9 0xaa + +turn off all LEDs (23-29): + EA-LPC3250v2=> i2c mw 0x60 8 0 + EA-LPC3250v2=> i2c mw 0x60 9 0 + +read value of switches (input): + EA-LPC3250v2=> i2c md 0x60 0 1 + 0000: 4f O +[none are pressed] + +press and hold SW2 while running the following: + EA-LPC3250v2=> i2c md 0x60 0 1 + 0000: 4e N +[SW2 is pressed] diff --git a/board/ea/ea-lpc3250devkitv2/ea-lpc3250devkitv2.c b/board/ea/ea-lpc3250devkitv2/ea-lpc3250devkitv2.c new file mode 100644 index 0000000000..72cf46c749 --- /dev/null +++ b/board/ea/ea-lpc3250devkitv2/ea-lpc3250devkitv2.c @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Board init file for Embedded Artists LPC3250 DevKit v2 + * Copyright (C) 2021 Trevor Woerner <twoerner@gmail.com> + */ + +#include <init.h> +#include <common.h> +#include <asm/io.h> +#include <asm/global_data.h> + +#include <asm/arch/clk.h> +#include <asm/arch/wdt.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +int +board_early_init_f(void) +{ + lpc32xx_uart_init(CONFIG_CONS_INDEX); + if (IS_ENABLED(CONFIG_SYS_I2C_LPC32XX)) { + lpc32xx_i2c_init(1); + lpc32xx_i2c_init(2); + } + return 0; +} + +int +board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x2000; + return 0; +} + +int +dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_64M); + return 0; +} diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 624e92ef9c..66b3d9a465 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -176,7 +176,7 @@ int board_early_init_f(void) } #ifdef CONFIG_FSL_ESDHC -#if !(CONFIG_IS_ENABLED(DM_MMC)) +#if !(CONFIG_IS_ENABLED(DM_MMC) || CONFIG_IS_ENABLED(DM_USB)) int board_mmc_init(struct bd_info *bd) { struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; @@ -217,6 +217,15 @@ int misc_init_r(void) return rc; } +int board_late_init(void) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; +#ifdef CONFIG_USB + clrsetbits_be32(&immap->sysconf.sicrl, SICRL_USB_A, 0x40000000); +#endif + return 0; +} + #if defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) diff --git a/board/socionext/developerbox/Kconfig b/board/socionext/developerbox/Kconfig new file mode 100644 index 0000000000..706b8dc0f1 --- /dev/null +++ b/board/socionext/developerbox/Kconfig @@ -0,0 +1,36 @@ +if ARCH_SYNQUACER + +choice + prompt "SC2A11 Cortex-A53 MPCore 24cores" + optional + +config TARGET_DEVELOPERBOX + bool "Socionext DeveloperBox" + select PCI + select DM_PCI + select PCIE_ECAM_SYNQUACER + select SYS_DISABLE_DCACHE_OPS + select OF_BOARD_SETUP + help + Choose this option if you build the U-Boot for the DeveloperBox + 96boards Enterprise Edition. + This board will booted from SCP firmware and it enables SMMU, thus + the dcache is updated automatically when DMA operation is executed. +endchoice + +config SYS_SOC + default "sc2a11" + +if TARGET_DEVELOPERBOX + +config SYS_BOARD + default "developerbox" + +config SYS_VENDOR + default "socionext" + +config SYS_CONFIG_NAME + default "synquacer" + +endif +endif diff --git a/board/socionext/developerbox/MAINTAINERS b/board/socionext/developerbox/MAINTAINERS new file mode 100644 index 0000000000..aa672b6e05 --- /dev/null +++ b/board/socionext/developerbox/MAINTAINERS @@ -0,0 +1,14 @@ +DEVELOPER BOX +M: Masami Hiramatsu <masami.hiramatsu@linaro.org> +M: Jassi Brar <jaswinder.singh@linaro.org> +S: Maintained +F: arch/arm/dts/synquacer-* +F: board/socionext/developerbox/* +F: configs/synquacer_developerbox_defconfig +F: drivers/i2c/synquacer_i2c.c +F: drivers/mmc/f_sdh30.c +F: drivers/net/sni_netsec.c +F: drivers/pci/pcie_ecam_synquacer.c +F: drivers/spi/spi-synquacer.c +F: include/configs/synquacer.h +F: doc/board/socionext/developerbox.rst diff --git a/board/socionext/developerbox/Makefile b/board/socionext/developerbox/Makefile new file mode 100644 index 0000000000..4a46de995a --- /dev/null +++ b/board/socionext/developerbox/Makefile @@ -0,0 +1,9 @@ +# +# Author: Masami Hiramatsu <masami.hiramatsu@linaro.org> +# +# Copyright (C) 2021 Linaro Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := developerbox.o diff --git a/board/socionext/developerbox/developerbox.c b/board/socionext/developerbox/developerbox.c new file mode 100644 index 0000000000..34335baec3 --- /dev/null +++ b/board/socionext/developerbox/developerbox.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * u-boot/board/socionext/developerbox/developerbox.c + * + * Copyright (C) 2016-2017 Socionext Inc. + * Copyright (C) 2021 Linaro Ltd. + */ +#include <asm/types.h> +#include <asm/armv8/mmu.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <common.h> +#include <env_internal.h> +#include <fdt_support.h> +#include <log.h> + +static struct mm_region sc2a11_mem_map[] = { + { + .virt = 0x0UL, + .phys = 0x0UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_OUTER_SHARE + }, { + /* 1st DDR block */ + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = PHYS_SDRAM_SIZE, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_OUTER_SHARE + }, { + /* 2nd DDR place holder */ + 0, + }, { + /* 3rd DDR place holder */ + 0, + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = sc2a11_mem_map; + +#define DDR_REGION_INDEX(i) (1 + (i)) +#define MAX_DDR_REGIONS 3 + +struct draminfo_entry { + u64 base; + u64 size; +}; + +struct draminfo { + u32 nr_regions; + u32 reserved; + struct draminfo_entry entry[3]; +}; + +struct draminfo *synquacer_draminfo = (void *)SQ_DRAMINFO_BASE; + +DECLARE_GLOBAL_DATA_PTR; + +#define LOAD_OFFSET 0x100 + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_LOAD_ADDR + LOAD_OFFSET; + + gd->env_addr = (ulong)&default_environment[0]; + + return 0; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + /* Remove SPI NOR and I2C0 for making DT compatible with EDK2 */ + fdt_del_node_and_alias(blob, "spi_nor"); + fdt_del_node_and_alias(blob, "i2c0"); + + return 0; +} + +/* + * DRAM configuration + */ + +int dram_init(void) +{ + struct draminfo_entry *ent = synquacer_draminfo->entry; + struct mm_region *mr; + int i, ri; + + if (synquacer_draminfo->nr_regions < 1) { + log_err("Failed to get correct DRAM information\n"); + return -1; + } + + /* + * U-Boot RAM size must be under the first DRAM region so that it doesn't + * access secure memory which is at the end of the first DRAM region. + */ + gd->ram_size = ent[0].size; + + /* Update memory region maps */ + for (i = 0; i < synquacer_draminfo->nr_regions; i++) { + if (i >= MAX_DDR_REGIONS) + break; + + ri = DDR_REGION_INDEX(i); + mem_map[ri].phys = ent[i].base; + mem_map[ri].size = ent[i].size; + if (i == 0) + continue; + + mr = &mem_map[DDR_REGION_INDEX(0)]; + mem_map[ri].virt = mr->virt + mr->size; + mem_map[ri].attrs = mr->attrs; + } + + return 0; +} + +int dram_init_banksize(void) +{ + struct draminfo_entry *ent = synquacer_draminfo->entry; + int i; + + for (i = 0; i < ARRAY_SIZE(gd->bd->bi_dram); i++) { + if (i < synquacer_draminfo->nr_regions) { + debug("%s: dram[%d] = %llx@%llx\n", __func__, i, ent[i].size, ent[i].base); + gd->bd->bi_dram[i].start = ent[i].base; + gd->bd->bi_dram[i].size = ent[i].size; + } + } + + return 0; +} + +int print_cpuinfo(void) +{ + printf("CPU: SC2A11:Cortex-A53 MPCore 24cores\n"); + return 0; +} diff --git a/board/timll/devkit3250/devkit3250.c b/board/timll/devkit3250/devkit3250.c index 3c744b943f..9d4ffb0f97 100644 --- a/board/timll/devkit3250/devkit3250.c +++ b/board/timll/devkit3250/devkit3250.c @@ -38,7 +38,7 @@ void reset_periph(void) int board_early_init_f(void) { - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); lpc32xx_i2c_init(1); lpc32xx_i2c_init(2); lpc32xx_ssp_init(); diff --git a/board/timll/devkit3250/devkit3250_spl.c b/board/timll/devkit3250/devkit3250_spl.c index 47af78ae0b..12e8ae9c39 100644 --- a/board/timll/devkit3250/devkit3250_spl.c +++ b/board/timll/devkit3250/devkit3250_spl.c @@ -49,7 +49,7 @@ void spl_board_init(void) /* First of all silence buzzer controlled by GPO_20 */ writel((1 << 20), &gpio->p3_outp_clr); - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); preloader_console_init(); ddr_init(&dram_64mb); diff --git a/board/work-microwave/work_92105/work_92105.c b/board/work-microwave/work_92105/work_92105.c index bdcecff730..5d12f84cfe 100644 --- a/board/work-microwave/work_92105/work_92105.c +++ b/board/work-microwave/work_92105/work_92105.c @@ -37,7 +37,7 @@ void reset_periph(void) int board_early_init_f(void) { /* initialize serial port for console */ - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); /* enable I2C, SSP, MAC, NAND */ lpc32xx_i2c_init(1); /* only I2C1 has devices, I2C2 has none */ lpc32xx_ssp_init(); diff --git a/board/work-microwave/work_92105/work_92105_spl.c b/board/work-microwave/work_92105/work_92105_spl.c index a31553a2d2..d9401145f2 100644 --- a/board/work-microwave/work_92105/work_92105_spl.c +++ b/board/work-microwave/work_92105/work_92105_spl.c @@ -58,7 +58,7 @@ const struct emc_dram_settings dram_128mb = { void spl_board_init(void) { /* initialize serial port for console */ - lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART); + lpc32xx_uart_init(CONFIG_CONS_INDEX); /* initialize console */ preloader_console_init(); /* init DDR and NAND to chainload U-Boot */ diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 003ebd8c6b..446d5948da 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -147,7 +147,9 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="PCIE" CONFIG_BOOTDELAY=6 +CONFIG_BOARD_LATE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_PCI_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y @@ -172,16 +174,14 @@ CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_DM_ETH_PHY=y +CONFIG_RGMII=y +CONFIG_MII=y CONFIG_TSEC_ENET=y +CONFIG_DM_PCI=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 93c048cee8..c0354bce1a 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -38,6 +38,7 @@ CONFIG_CMD_JFFS2=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y +CONFIG_SYS_I2C_LPC32XX=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y @@ -51,6 +52,8 @@ CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_ADDR=31 CONFIG_PHY_SMSC=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=5 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_USB=y diff --git a/configs/ea-lpc3250devkitv2_defconfig b/configs/ea-lpc3250devkitv2_defconfig new file mode 100644 index 0000000000..e8d60b573e --- /dev/null +++ b/configs/ea-lpc3250devkitv2_defconfig @@ -0,0 +1,26 @@ +CONFIG_ARM=y +CONFIG_SYS_ICACHE_OFF=y +CONFIG_SYS_DCACHE_OFF=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_LPC32XX=y +CONFIG_SYS_TEXT_BASE=0x83000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_TARGET_EA_LPC3250DEVKITV2=y +CONFIG_DEFAULT_DEVICE_TREE="lpc3250-ea3250" +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +# CONFIG_AUTOBOOT is not set +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_PROMPT="EA-LPC3250v2=> " +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_OF_CONTROL=y +# CONFIG_NET is not set +CONFIG_LPC32XX_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_LPC32XX=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=5 +CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index 5d28135a82..378bf936d7 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index 0e914e91eb..4ec2961a4e 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index d28bc0f976..012d346500 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index ae44f01ff5..1868c7024f 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -16,7 +16,6 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y -CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set @@ -24,8 +23,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y -CONFIG_EEPRO100=y -CONFIG_TULIP=y -CONFIG_PCI=y CONFIG_BAUDRATE=38400 CONFIG_OF_LIBFDT=y diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig new file mode 100644 index 0000000000..d42db9a1d6 --- /dev/null +++ b/configs/synquacer_developerbox_defconfig @@ -0,0 +1,129 @@ +CONFIG_ARM=y +CONFIG_ARCH_SYNQUACER=y +CONFIG_SYS_TEXT_BASE=0x08200000 +CONFIG_ENV_SIZE=0x30000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEBUG_UART_BASE=0x2a400000 +CONFIG_DEBUG_UART_CLOCK=62500000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y +CONFIG_TARGET_DEVELOPERBOX=y +CONFIG_DEFAULT_DEVICE_TREE="synquacer-sc2a11-developerbox" +CONFIG_AHCI=y +CONFIG_BOOTSTAGE_STASH_SIZE=4096 +CONFIG_BOOTM_EFI=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTEFI=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_GPT=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_NVEDIT_INFO=y +CONFIG_CMD_DM=y +CONFIG_CMD_MII=y +CONFIG_CMD_NET=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_DATE=y +CONFIG_CMD_RTC=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_SATA=y +CONFIG_CMD_NVME=y +CONFIG_CMD_USB=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDPARTS_DEFAULT="nor1:448k(BootStrap-BL1),576k(Flash-Writer),512k(SCP-BL2),480k(FIP-TFA),32k(Stg2-Tables),1m@2m(U-Boot),1m@3m(UBoot-Env),2m@5m(Ex-OPTEE)" +CONFIG_MTDIDS_DEFAULT="nor1=nor1" +CONFIG_CMD_LOG=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_EFI_PARTITION=y +CONFIG_EFI_LOADER=y +CONFIG_EFI_DEVICE_PATH_TO_TEXT=y +CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2=y +CONFIG_EFI_UNICODE_CAPITALIZATION=y +CONFIG_EFI_HAVE_RUNTIME_RESET=y +CONFIG_EFI_GET_TIME=y +CONFIG_EFI_SET_TIME=y +CONFIG_CMD_EFI_VARIABLE_FILE_STORE=Y +CONFIG_OF_SEPARATE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_ENV_SPI_BUS=y +CONFIG_ENV_SPI_BUS=0 +CONFIG_USE_ENV_SPI_CS=y +CONFIG_ENV_SPI_CS=0 +CONFIG_PROT_UDP=y +CONFIG_BAUDRATE=115200 +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=0 +CONFIG_DM_SERIAL=y +CONFIG_PL01X_SERIAL=y +CONFIG_SATA=y +CONFIG_NVME=y +CONFIG_SCSI_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_SYNQUACER=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_F_SDH30=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=31250000 +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHYLIB=y +CONFIG_PHYLIB_10G=y +CONFIG_NET=y +CONFIG_NETDEVICES=y +CONFIG_SNI_NETSEC=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_RGMII=y +CONFIG_MII=y +CONFIG_DM_RTC=y +CONFIG_RTC_PCF8563=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_SYNQUACER_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_STORAGE=y +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y +CONFIG_EFI_CAPSULE_ON_DISK=y +CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y +CONFIG_EFI_CAPSULE_FIRMWARE=y +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y +CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y +CONFIG_EFI_CAPSULE_FMP_HEADER=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_CMD_DFU=y +CONFIG_DFU_TFTP=y +CONFIG_DFU_MTD=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y +CONFIG_DFU_SF_PART=y +CONFIG_FIT=y +CONFIG_OF_LIBFDT=y +CONFIG_CMD_ERASEENV=y diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index c3f666dcfe..507f24fc37 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -42,11 +42,14 @@ CONFIG_DOS_PARTITION=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_VERSION_VARIABLE=y +CONFIG_SYS_I2C_LPC32XX=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_SMSC=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=5 CONFIG_SYS_NS16550=y CONFIG_SPI=y diff --git a/doc/board/emulation/qemu_capsule_update.rst b/doc/board/emulation/qemu_capsule_update.rst index 33ce4bcd32..0a2286d039 100644 --- a/doc/board/emulation/qemu_capsule_update.rst +++ b/doc/board/emulation/qemu_capsule_update.rst @@ -39,16 +39,9 @@ In addition, the following config needs to be disabled(QEMU ARM specific):: CONFIG_TFABOOT -The capsule file can be generated by using the GenerateCapsule.py -script in EDKII:: - - $ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \ - <capsule_file_name> --fw-version <val> --lsv <val> --guid \ - e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose --update-image-index \ - <val> --verbose <u-boot.bin> +The capsule file can be generated by using the tools/mkeficapsule:: -The above is a wrapper script(GenerateCapsule) which eventually calls -the actual GenerateCapsule.py script. + $ mkeficapsule --raw <u-boot.bin> --index 1 <capsule_file_name> As per the UEFI specification, the capsule file needs to be placed on the EFI System Partition, under the \EFI\UpdateCapsule directory. The diff --git a/doc/board/index.rst b/doc/board/index.rst index 6fc0442eda..196b597609 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -23,6 +23,7 @@ Board-specific doc rockchip/index sifive/index sipeed/index + socionext/index st/index tbs/index toradex/index diff --git a/doc/board/socionext/developerbox.rst b/doc/board/socionext/developerbox.rst new file mode 100644 index 0000000000..2d943c23be --- /dev/null +++ b/doc/board/socionext/developerbox.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Introduction +============ + +DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: - + +* Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard +* 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default) +* 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots + (1x slots are connected via PCIe bridge chip) +* 4 USB-3.0 ports +* 2 SATA ports +* 1 GbE network port +* 1 USB-UART serial port (micro USB) +* 64MB SPI NOR Flash +* 8GB eMMC Flash Storage +* 96boards LS connector + +The DeveloperBox schematic can be found here: - +https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs/mzsc2am_v03_20180115_a.pdf + +And the other documents can be found here: - +https://www.96boards.org/documentation/enterprise/developerbox/ + + +Currently, the U-Boot port supports: - + +* USB +* eMMC +* SPI-NOR +* SATA +* GbE + +The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default. +The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as +BL33, but no need to combine with it. + +Compile from source +=================== + +You can build U-Boot without any additinal source code.:: + + cd u-boot + export ARCH=arm64 + export CROSS_COMPILE=aarch64-linux-gnu- + make SynQuacer_defconfig + make -j `noproc` + +Then, expand the binary to 1MB for preparing flash.:: + + cp u-boot.bin SPI_NOR_UBOOT.fd + truncate -s 1M SPI_NOR_UBOOT.fd + +Installation +============ + +You can install the SNI_NOR_UBOOT.fd via NOR flash writer. + +Flashing the U-Boot image on DeveloperBox requires a 96boards UART mezzanine or other mezzanine which can connect to LS-UART0 port. +Connect USB cable from host to the LS-UART0 and set DSW2-7 to ON, and turn the board on again. The flash writer program will be started automatically; don’t forget to turn the DSW2-7 off again after flashing. + +*!!CAUTION!! If you failed to write the U-Boot image on wrong address, the board can be bricked. See below page if you need to recover the bricked board. See the following page for more detail* + +https://www.96boards.org/documentation/enterprise/developerbox/installation/board-recovery.md.html + +When the serial flasher is running correctly is will show the following boot messages shown via LS-UART0:: + + + /*------------------------------------------*/ + /* SC2A11 "SynQuacer" series Flash writer */ + /* */ + /* Version: cd254ac */ + /* Build: 12/15/17 11:25:45 */ + /*------------------------------------------*/ + + Command Input > + +Once the flasher tool is running we are ready flash the UEFI image:: + + flash rawwrite 200000 100000 + >> Send SPI_NOR_UBOOT.fd via XMODEM (Control-A S in minicom) << + +*!!NOTE!! The flasher command parameter is different from the command for board recovery. U-Boot uses the offset 200000 (2-five-0, 2M in hex) and the size 100000 (1-five-0, 1M in hex).* + +After transferring the SPI_NOR_UBOOT.fd, turn off the DSW2-7 and reset the board. + diff --git a/doc/board/socionext/index.rst b/doc/board/socionext/index.rst new file mode 100644 index 0000000000..4673dcc45b --- /dev/null +++ b/doc/board/socionext/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Socionext +========= + +.. toctree:: + :maxdepth: 2 + + developerbox diff --git a/drivers/ata/ahci-pci.c b/drivers/ata/ahci-pci.c index 11ec98b56f..b1d231e0f9 100644 --- a/drivers/ata/ahci-pci.c +++ b/drivers/ata/ahci-pci.c @@ -5,6 +5,7 @@ #include <common.h> #include <ahci.h> +#include <scsi.h> #include <dm.h> #include <pci.h> @@ -28,6 +29,7 @@ static const struct udevice_id ahci_pci_ids[] = { U_BOOT_DRIVER(ahci_pci) = { .name = "ahci_pci", .id = UCLASS_AHCI, + .ops = &scsi_ops, .of_match = ahci_pci_ids, .bind = ahci_pci_bind, .probe = ahci_pci_probe, diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 57a4efb88e..41065dd502 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -169,6 +169,12 @@ config SYS_I2C_IMX_LPI2C help Add support for the NXP i.MX LPI2C driver. +config SYS_I2C_LPC32XX + bool "LPC32XX I2C driver" + depends on ARCH_LPC32XX + help + Enable support for the LPC32xx I2C driver. + config SYS_I2C_MESON bool "Amlogic Meson I2C driver" depends on DM_I2C && ARCH_MESON @@ -455,6 +461,13 @@ config SYS_I2C_STM32F7 _ Optional clock stretching _ Software reset +config SYS_I2C_SYNQUACER + bool "Socionext SynQuacer I2C controller" + depends on ARCH_SYNQUACER && DM_I2C + help + Support for Socionext Synquacer I2C controller. This I2C controller + will be used for RTC and LS-connector on DeveloperBox. + config SYS_I2C_TEGRA bool "NVIDIA Tegra internal I2C controller" depends on ARCH_TEGRA diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 8c9f1fcd8b..06a1150f03 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o obj-$(CONFIG_SYS_I2C_STM32F7) += stm32f7_i2c.o +obj-$(CONFIG_SYS_I2C_SYNQUACER) += synquacer_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o obj-$(CONFIG_SYS_I2C_UNIPHIER) += i2c-uniphier.o obj-$(CONFIG_SYS_I2C_UNIPHIER_F) += i2c-uniphier-f.o diff --git a/drivers/i2c/lpc32xx_i2c.c b/drivers/i2c/lpc32xx_i2c.c index f89f7955e4..774129ad8e 100644 --- a/drivers/i2c/lpc32xx_i2c.c +++ b/drivers/i2c/lpc32xx_i2c.c @@ -38,7 +38,6 @@ /* Status register values */ #define LPC32XX_I2C_STAT_TFF 0x00000400 #define LPC32XX_I2C_STAT_RFE 0x00000200 -#define LPC32XX_I2C_STAT_DRMI 0x00000008 #define LPC32XX_I2C_STAT_NAI 0x00000004 #define LPC32XX_I2C_STAT_TDI 0x00000001 @@ -283,11 +282,7 @@ static int lpc32xx_i2c_probe(struct udevice *bus) { struct lpc32xx_i2c_dev *dev = dev_get_plat(bus); - /* - * FIXME: This is not permitted - * dev_seq(bus) = dev->index; - */ - + dev->base = dev_read_addr_ptr(bus); __i2c_init(dev->base, dev->speed, 0, dev->index); return 0; } @@ -353,9 +348,15 @@ static const struct dm_i2c_ops lpc32xx_i2c_ops = { .set_bus_speed = lpc32xx_i2c_set_bus_speed, }; +static const struct udevice_id lpc32xx_i2c_ids[] = { + { .compatible = "nxp,pnx-i2c" }, + { } +}; + U_BOOT_DRIVER(i2c_lpc32xx) = { - .id = UCLASS_I2C, .name = "i2c_lpc32xx", + .id = UCLASS_I2C, + .of_match = lpc32xx_i2c_ids, .probe = lpc32xx_i2c_probe, .ops = &lpc32xx_i2c_ops, }; diff --git a/drivers/i2c/synquacer_i2c.c b/drivers/i2c/synquacer_i2c.c new file mode 100644 index 0000000000..6672d9435e --- /dev/null +++ b/drivers/i2c/synquacer_i2c.c @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + */ + +#include <dm/device_compat.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <linux/types.h> +#include <dm.h> +#include <fdtdec.h> +#include <i2c.h> +#include <clk.h> + +#define REG_BSR 0x0 +#define REG_BCR 0x4 +#define REG_CCR 0x8 +#define REG_ADR 0xc +#define REG_DAR 0x10 +#define REG_CSR 0x14 +#define REG_FSR 0x18 +#define REG_BC2R 0x1c + +/* I2C register bit definitions */ +#define BSR_FBT BIT(0) // First Byte Transfer +#define BSR_GCA BIT(1) // General Call Address +#define BSR_AAS BIT(2) // Address as Slave +#define BSR_TRX BIT(3) // Transfer/Receive +#define BSR_LRB BIT(4) // Last Received Bit +#define BSR_AL BIT(5) // Arbitration Lost +#define BSR_RSC BIT(6) // Repeated Start Cond. +#define BSR_BB BIT(7) // Bus Busy + +#define BCR_INT BIT(0) // Interrupt +#define BCR_INTE BIT(1) // Interrupt Enable +#define BCR_GCAA BIT(2) // Gen. Call Access Ack. +#define BCR_ACK BIT(3) // Acknowledge +#define BCR_MSS BIT(4) // Master Slave Select +#define BCR_SCC BIT(5) // Start Condition Cont. +#define BCR_BEIE BIT(6) // Bus Error Int Enable +#define BCR_BER BIT(7) // Bus Error + +#define CCR_CS_MASK (0x1f) // CCR Clock Period Sel. +#define CCR_EN BIT(5) // Enable +#define CCR_FM BIT(6) // Speed Mode Select + +#define CSR_CS_MASK (0x3f) // CSR Clock Period Sel. + +#define BC2R_SCLL BIT(0) // SCL Low Drive +#define BC2R_SDAL BIT(1) // SDA Low Drive +#define BC2R_SCLS BIT(4) // SCL Status +#define BC2R_SDAS BIT(5) // SDA Status + +/* PCLK frequency */ +#define BUS_CLK_FR(rate) (((rate) / 20000000) + 1) + +#define I2C_CLK_DEF 62500000 + +/* STANDARD MODE frequency */ +#define CLK_MASTER_STD(rate) \ + DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_SPEED_STANDARD_RATE) - 2, 2) +/* FAST MODE frequency */ +#define CLK_MASTER_FAST(rate) \ + DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_SPEED_FAST_RATE) - 2) * 2, 3) + +/* (clkrate <= 18000000) */ +/* calculate the value of CS bits in CCR register on standard mode */ +#define CCR_CS_STD_MAX_18M(rate) \ + ((CLK_MASTER_STD(rate) - 65) \ + & CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on standard mode */ +#define CSR_CS_STD_MAX_18M(rate) 0x00 + +/* calculate the value of CS bits in CCR register on fast mode */ +#define CCR_CS_FAST_MAX_18M(rate) \ + ((CLK_MASTER_FAST(rate) - 1) \ + & CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on fast mode */ +#define CSR_CS_FAST_MAX_18M(rate) 0x00 + +/* (clkrate > 18000000) */ +/* calculate the value of CS bits in CCR register on standard mode */ +#define CCR_CS_STD_MIN_18M(rate) \ + ((CLK_MASTER_STD(rate) - 1) \ + & CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on standard mode */ +#define CSR_CS_STD_MIN_18M(rate) \ + (((CLK_MASTER_STD(rate) - 1) >> 5) \ + & CSR_CS_MASK) + +/* calculate the value of CS bits in CCR register on fast mode */ +#define CCR_CS_FAST_MIN_18M(rate) \ + ((CLK_MASTER_FAST(rate) - 1) \ + & CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on fast mode */ +#define CSR_CS_FAST_MIN_18M(rate) \ + (((CLK_MASTER_FAST(rate) - 1) >> 5) \ + & CSR_CS_MASK) + +/* min I2C clock frequency 14M */ +#define MIN_CLK_RATE (14 * 1000000) +/* max I2C clock frequency 200M */ +#define MAX_CLK_RATE (200 * 1000000) +/* I2C clock frequency 18M */ +#define CLK_RATE_18M (18 * 1000000) + +#define SPEED_FM 400 // Fast Mode +#define SPEED_SM 100 // Standard Mode + +DECLARE_GLOBAL_DATA_PTR; + +struct synquacer_i2c { + void __iomem *base; + unsigned long pclkrate; + unsigned long speed_khz; +}; + +static int wait_irq(struct udevice *dev) +{ + struct synquacer_i2c *i2c = dev_get_priv(dev); + int timeout = 500000; + + do { + if (readb(i2c->base + REG_BCR) & BCR_INT) + return 0; + } while (timeout--); + + pr_err("%s: timeout\n", __func__); + return -1; +} + +static int synquacer_i2c_xfer_start(struct synquacer_i2c *i2c, + int addr, int read) +{ + u8 bsr, bcr; + + writeb((addr << 1) | (read ? 1 : 0), i2c->base + REG_DAR); + + bsr = readb(i2c->base + REG_BSR); + bcr = readb(i2c->base + REG_BCR); + + if ((bsr & BSR_BB) && !(bcr & BCR_MSS)) + return -EBUSY; + + if (bsr & BSR_BB) { + writeb(bcr | BCR_SCC, i2c->base + REG_BCR); + } else { + if (bcr & BCR_MSS) + return -EAGAIN; + /* Start Condition + Enable Interrupts */ + writeb(bcr | BCR_MSS | BCR_INTE | BCR_BEIE, i2c->base + REG_BCR); + } + + udelay(100); + return 0; +} + +static int synquacer_i2c_xfer(struct udevice *bus, + struct i2c_msg *msg, int nmsgs) +{ + struct synquacer_i2c *i2c = dev_get_priv(bus); + u8 bsr, bcr; + int idx; + + for (; nmsgs > 0; nmsgs--, msg++) { + synquacer_i2c_xfer_start(i2c, msg->addr, msg->flags & I2C_M_RD); + if (wait_irq(bus)) + return -EREMOTEIO; + + bsr = readb(i2c->base + REG_BSR); + if (bsr & BSR_LRB) { + debug("%s: No ack received\n", __func__); + return -EREMOTEIO; + } + + idx = 0; + do { + bsr = readb(i2c->base + REG_BSR); + bcr = readb(i2c->base + REG_BCR); + if (bcr & BCR_BER) { + debug("%s: Bus error detected\n", __func__); + return -EREMOTEIO; + } + if ((bsr & BSR_AL) || !(bcr & BCR_MSS)) { + debug("%s: Arbitration lost\n", __func__); + return -EREMOTEIO; + } + + if (msg->flags & I2C_M_RD) { + bcr = BCR_MSS | BCR_INTE | BCR_BEIE; + if (idx < msg->len - 1) + bcr |= BCR_ACK; + writeb(bcr, i2c->base + REG_BCR); + if (wait_irq(bus)) + return -EREMOTEIO; + bsr = readb(i2c->base + REG_BSR); + if (!(bsr & BSR_FBT)) + msg->buf[idx++] = readb(i2c->base + REG_DAR); + } else { + writeb(msg->buf[idx++], i2c->base + REG_DAR); + bcr = BCR_MSS | BCR_INTE | BCR_BEIE; + writeb(bcr, i2c->base + REG_BCR); + if (wait_irq(bus)) + return -EREMOTEIO; + bsr = readb(i2c->base + REG_BSR); + if (bsr & BSR_LRB) { + debug("%s: no ack\n", __func__); + return -EREMOTEIO; + } + } + } while (idx < msg->len); + } + + /* Force bus state to idle, terminating any ongoing transfer */ + writeb(0, i2c->base + REG_BCR); + udelay(100); + + return 0; +} + +static void synquacer_i2c_hw_reset(struct synquacer_i2c *i2c) +{ + /* Disable clock */ + writeb(0, i2c->base + REG_CCR); + writeb(0, i2c->base + REG_CSR); + + /* Set own Address */ + writeb(0, i2c->base + REG_ADR); + + /* Set PCLK frequency */ + writeb(BUS_CLK_FR(i2c->pclkrate), i2c->base + REG_FSR); + + /* clear IRQ (INT=0, BER=0), Interrupt Disable */ + writeb(0, i2c->base + REG_BCR); + writeb(0, i2c->base + REG_BC2R); +} + +static int synquacer_i2c_get_bus_speed(struct udevice *bus) +{ + struct synquacer_i2c *i2c = dev_get_priv(bus); + + return i2c->speed_khz * 1000; +} + +static int synquacer_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) +{ + struct synquacer_i2c *i2c = dev_get_priv(bus); + u32 rt = i2c->pclkrate; + u8 ccr_cs, csr_cs; + + /* Set PCLK frequency */ + writeb(BUS_CLK_FR(i2c->pclkrate), i2c->base + REG_FSR); + + if (speed >= SPEED_FM * 1000) { + i2c->speed_khz = SPEED_FM; + if (i2c->pclkrate <= CLK_RATE_18M) { + ccr_cs = CCR_CS_FAST_MAX_18M(rt); + csr_cs = CSR_CS_FAST_MAX_18M(rt); + } else { + ccr_cs = CCR_CS_FAST_MIN_18M(rt); + csr_cs = CSR_CS_FAST_MIN_18M(rt); + } + + /* Set Clock and enable, Set fast mode */ + writeb(ccr_cs | CCR_FM | CCR_EN, i2c->base + REG_CCR); + writeb(csr_cs, i2c->base + REG_CSR); + } else { + i2c->speed_khz = SPEED_SM; + if (i2c->pclkrate <= CLK_RATE_18M) { + ccr_cs = CCR_CS_STD_MAX_18M(rt); + csr_cs = CSR_CS_STD_MAX_18M(rt); + } else { + ccr_cs = CCR_CS_STD_MIN_18M(rt); + csr_cs = CSR_CS_STD_MIN_18M(rt); + } + + /* Set Clock and enable, Set standard mode */ + writeb(ccr_cs | CCR_EN, i2c->base + REG_CCR); + writeb(csr_cs, i2c->base + REG_CSR); + } + + return 0; +} + +static int synquacer_i2c_of_to_plat(struct udevice *bus) +{ + struct synquacer_i2c *priv = dev_get_priv(bus); + struct clk ck; + int ret; + + ret = clk_get_by_index(bus, 0, &ck); + if (ret < 0) { + priv->pclkrate = I2C_CLK_DEF; + } else { + clk_enable(&ck); + priv->pclkrate = clk_get_rate(&ck); + } + + return 0; +} + +static int synquacer_i2c_probe(struct udevice *bus) +{ + struct synquacer_i2c *i2c = dev_get_priv(bus); + + i2c->base = dev_read_addr_ptr(bus); + synquacer_i2c_hw_reset(i2c); + synquacer_i2c_set_bus_speed(bus, 400000); /* set default speed */ + return 0; +} + +static const struct dm_i2c_ops synquacer_i2c_ops = { + .xfer = synquacer_i2c_xfer, + .set_bus_speed = synquacer_i2c_set_bus_speed, + .get_bus_speed = synquacer_i2c_get_bus_speed, +}; + +static const struct udevice_id synquacer_i2c_ids[] = { + { + .compatible = "socionext,synquacer-i2c", + }, + { } +}; + +U_BOOT_DRIVER(sni_synquacer_i2c) = { + .name = "sni_synquacer_i2c", + .id = UCLASS_I2C, + .of_match = synquacer_i2c_ids, + .of_to_plat = synquacer_i2c_of_to_plat, + .probe = synquacer_i2c_probe, + .priv_auto = sizeof(struct synquacer_i2c), + .ops = &synquacer_i2c_ops, +}; diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index d0176175e8..717ce5a62f 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -561,6 +561,16 @@ config MMC_SDHCI_IPROC If unsure, say N. +config MMC_SDHCI_F_SDH30 + bool "SDHCI support for Fujitsu Semiconductor F_SDH30" + depends on BLK && DM_MMC + depends on MMC_SDHCI + help + This selects the Secure Digital Host Controller Interface (SDHCI) + Needed by some Fujitsu SoC for MMC / SD / SDIO support. + If you have a controller with this interface, say Y or M here. + If unsure, say N. + config MMC_SDHCI_KONA bool "SDHCI support on Broadcom KONA platform" depends on MMC_SDHCI diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index d96ac90719..dde6cd563f 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -77,3 +77,4 @@ obj-$(CONFIG_MMC_UNIPHIER) += tmio-common.o uniphier-sd.o obj-$(CONFIG_RENESAS_SDHI) += tmio-common.o renesas-sdhi.o obj-$(CONFIG_MMC_BCM2835) += bcm2835_sdhost.o obj-$(CONFIG_MMC_MTK) += mtk-sd.o +obj-$(CONFIG_MMC_SDHCI_F_SDH30) += f_sdh30.o diff --git a/drivers/mmc/f_sdh30.c b/drivers/mmc/f_sdh30.c new file mode 100644 index 0000000000..3a85d9e348 --- /dev/null +++ b/drivers/mmc/f_sdh30.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Socionext F_SDH30 eMMC driver + * Copyright 2021 Linaro Ltd. + * Copyright 2021 Socionext, Inc. + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <malloc.h> +#include <sdhci.h> + +struct f_sdh30_plat { + struct mmc_config cfg; + struct mmc mmc; +}; + +DECLARE_GLOBAL_DATA_PTR; + +static int f_sdh30_sdhci_probe(struct udevice *dev) +{ + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct f_sdh30_plat *plat = dev_get_plat(dev); + struct sdhci_host *host = dev_get_priv(dev); + int ret; + + ret = mmc_of_parse(dev, &plat->cfg); + if (ret) + return ret; + + host->mmc = &plat->mmc; + host->mmc->dev = dev; + host->mmc->priv = host; + + ret = sdhci_setup_cfg(&plat->cfg, host, 200000000, 400000); + if (ret) + return ret; + + upriv->mmc = host->mmc; + + mmc_set_clock(host->mmc, host->mmc->cfg->f_min, MMC_CLK_ENABLE); + + return sdhci_probe(dev); +} + +static int f_sdh30_of_to_plat(struct udevice *dev) +{ + struct sdhci_host *host = dev_get_priv(dev); + + host->name = strdup(dev->name); + host->ioaddr = dev_read_addr_ptr(dev); + host->bus_width = dev_read_u32_default(dev, "bus-width", 4); + host->index = dev_read_u32_default(dev, "index", 0); + + return 0; +} + +static int f_sdh30_bind(struct udevice *dev) +{ + struct f_sdh30_plat *plat = dev_get_plat(dev); + + return sdhci_bind(dev, &plat->mmc, &plat->cfg); +} + +static const struct udevice_id f_sdh30_mmc_ids[] = { + { .compatible = "fujitsu,mb86s70-sdhci-3.0" }, + { } +}; + +U_BOOT_DRIVER(f_sdh30_drv) = { + .name = "f_sdh30_sdhci", + .id = UCLASS_MMC, + .of_match = f_sdh30_mmc_ids, + .of_to_plat = f_sdh30_of_to_plat, + .ops = &sdhci_ops, + .bind = f_sdh30_bind, + .probe = f_sdh30_sdhci_probe, + .priv_auto = sizeof(struct sdhci_host), + .plat_auto = sizeof(struct f_sdh30_plat), +}; diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index b2b7b253f8..782179eb0f 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -81,6 +81,18 @@ config PCIE_ECAM_GENERIC Say Y here if you want to enable support for generic ECAM-based PCIe host controllers, such as the one emulated by QEMU. +config PCIE_ECAM_SYNQUACER + bool "SynQuacer ECAM-based PCI host controller support" + default n + depends on DM_PCI + select PCI_INIT_R + select PCI_REGION_MULTI_ENTRY + help + Say Y here if you want to enable support for Socionext + SynQuacer SoC's ECAM-based PCIe host controllers. + Note that this must be configured when boot because Linux driver + expects the PCIe RC has been configured in the bootloader. + config PCI_PHYTIUM bool "Phytium PCIe support" depends on DM_PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index c742bb2c94..6568dc9a08 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -16,6 +16,7 @@ endif obj-$(CONFIG_PCI) += pci_auto_common.o pci_common.o obj-$(CONFIG_PCIE_ECAM_GENERIC) += pcie_ecam_generic.o +obj-$(CONFIG_PCIE_ECAM_SYNQUACER) += pcie_ecam_synquacer.o obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 22a033e632..afe4f1974a 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -550,6 +550,9 @@ int pci_auto_config_devices(struct udevice *bus) max_bus = ret; sub_bus = max(sub_bus, max_bus); + if (dev_get_parent(dev) == bus) + continue; + pplat = dev_get_parent_plat(dev); if (pplat->class == (PCI_CLASS_DISPLAY_VGA << 8)) set_vga_bridge_bits(dev); diff --git a/drivers/pci/pcie_ecam_synquacer.c b/drivers/pci/pcie_ecam_synquacer.c new file mode 100644 index 0000000000..c6e7c59f8a --- /dev/null +++ b/drivers/pci/pcie_ecam_synquacer.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SynQuacer PCIE host driver + * + * Based on drivers/pci/pcie_ecam_generic.c + * + * Copyright (C) 2016 Imagination Technologies + * Copyright (C) 2021 Linaro Ltd. + */ + +#include <common.h> +#include <dm.h> +#include <pci.h> +#include <log.h> + +#include <asm/io.h> +#include <linux/bitops.h> +#include <linux/delay.h> + +/* iATU registers */ +#define IATU_VIEWPORT_OFF 0x900 +#define IATU_VIEWPORT_INBOUND BIT(31) +#define IATU_VIEWPORT_OUTBOUND 0 +#define IATU_VIEWPORT_REGION_INDEX(idx) ((idx) & 7) + +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0 0x904 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM 0x0 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_IO 0x2 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG0 0x4 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG1 0x5 +#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TH BIT(12) + +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0 0x908 +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_REGION_EN BIT(31) +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_CFG_SHIFT_MODE BIT(28) +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_32BIT 0xF +#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_64BIT 0xFF + +#define IATU_LWR_BASE_ADDR_OFF_OUTBOUND_0 0x90C +#define IATU_UPPER_BASE_ADDR_OFF_OUTBOUND_0 0x910 +#define IATU_LIMIT_ADDR_OFF_OUTBOUND_0 0x914 +#define IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0 0x918 +#define IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0 0x91C + +/* Clock and resets */ +#define CORE_CONTROL 0x000 +#define APP_LTSSM_ENABLE BIT(4) +#define DEVICE_TYPE (BIT(3) | BIT(2) | BIT(1) | BIT(0)) + +#define AXI_CLK_STOP 0x004 +#define DBI_ACLK_STOP BIT(8) +#define SLV_ACLK_STOP BIT(4) +#define MSTR_ACLK_STOP BIT(0) +#define DBI_CSYSREQ_REG BIT(9) +#define SLV_CSYSREQ_REG BIT(5) +#define MSTR_CSYSREQ_REG BIT(1) + +#define RESET_CONTROL_1 0x00C +#define PERST_N_O_REG BIT(5) +#define PERST_N_I_REG BIT(4) +#define BUTTON_RST_N_REG BIT(1) +#define PWUP_RST_N_REG BIT(0) + +#define RESET_CONTROL_2 0x010 + +#define RESET_SELECT_1 0x014 +#define SQU_RST_SEL BIT(29) +#define PHY_RST_SEL BIT(28) +#define PWR_RST_SEL BIT(24) +#define STI_RST_SEL BIT(20) +#define N_STI_RST_SEL BIT(16) +#define CORE_RST_SEL BIT(12) +#define PERST_SEL BIT(4) +#define BUTTON_RST_SEL BIT(1) +#define PWUP_RST_SEL BIT(0) + +#define RESET_SELECT_2 0x018 +#define DBI_ARST_SEL BIT(8) +#define SLV_ARST_SEL BIT(4) +#define MSTR_ARST_SEL BIT(0) + +#define EM_CONTROL 0x030 +#define PRE_DET_STT_REG BIT(4) + +#define EM_SELECT 0x034 +#define PRE_DET_STT_SEL BIT(4) + +#define PM_CONTROL_2 0x050 +#define SYS_AUX_PWR_DET BIT(8) + +#define PHY_CONFIG_COM_6 0x114 +#define PIPE_PORT_SEL GENMASK(1, 0) + +#define LINK_MONITOR 0x210 +#define SMLH_LINK_UP BIT(0) + +#define LINK_CAPABILITIES_REG 0x07C +#define PCIE_CAP_MAX_LINK_WIDTH GENMASK(7, 4) +#define PCIE_CAP_MAX_LINK_SPEED GENMASK(3, 0) + +#define LINK_CONTROL_LINK_STATUS_REG 0x080 +#define PCIE_CAP_NEGO_LINK_WIDTH GENMASK(23, 20) +#define PCIE_CAP_LINK_SPEED GENMASK(19, 16) + +#define TYPE1_CLASS_CODE_REV_ID_REG 0x008 +#define BASE_CLASS_CODE 0xFF000000 +#define BASE_CLASS_CODE_VALUE 0x06 +#define SUBCLASS_CODE 0x00FF0000 +#define SUBCLASS_CODE_VALUE 0x04 +#define PROGRAM_INTERFACE 0x0000FF00 +#define PROGRAM_INTERFACE_VALUE 0x00 + +#define GEN2_CONTROL_OFF 0x80c +#define DIRECT_SPEED_CHANGE BIT(17) + +#define MISC_CONTROL_1_OFF 0x8BC +#define DBI_RO_WR_EN BIT(0) + +static void or_writel(void *base, u32 offs, u32 val) +{ + writel(readl(base + offs) | val, base + offs); +} + +static void masked_writel(void *base, u32 offs, u32 mask, u32 val) +{ + u32 data; + int shift = ffs(mask); /* Note that ffs() returns 1 for 0x1 */ + + if (val && shift > 1) + val <<= shift - 1; + + if (mask != ~0) + data = (readl(base + offs) & ~mask) | val; + else + data = val; + + writel(data, base + offs); +} + +static u32 masked_readl(void *base, u32 offs, u32 mask) +{ + u32 data; + int shift = ffs(mask); /* Note that ffs() returns 1 for 0x1 */ + + data = readl(base + offs); + + if (mask != ~0) + data &= mask; + if (shift > 1) + data >>= shift - 1; + + return data; +} + +/* + * Since SynQuacer's PCIe RC is expected to be initialized in the + * firmware (including U-Boot), devicetree doesn't have control + * blocks. + * + * Thus, this will initialize the PCIe RC with fixed addresses. + */ + +#define SYNQUACER_PCI_SEG0_CONFIG_BASE 0x60000000 +#define SYNQUACER_PCI_SEG0_CONFIG_SIZE 0x07f00000 +#define SYNQUACER_PCI_SEG0_DBI_BASE 0x583d0000 +#define SYNQUACER_PCI_SEG0_EXS_BASE 0x58390000 + +#define SYNQUACER_PCI_SEG1_CONFIG_BASE 0x70000000 +#define SYNQUACER_PCI_SEG1_CONFIG_SIZE 0x07f00000 +#define SYNQUACER_PCI_SEG1_DBI_BASE 0x583c0000 +#define SYNQUACER_PCI_SEG1_EXS_BASE 0x58380000 + +#define SIZE_16KB 0x00004000 +#define SIZE_64KB 0x00010000 +#define SIZE_1MB 0x00100000 + +#define SYNQUACER_PCI_DBI_SIZE SIZE_16KB +#define SYNQUACER_PCI_EXS_SIZE SIZE_64KB + +#define NUM_SQ_PCI_RC 2 + +static const struct synquacer_pcie_base { + phys_addr_t cfg_base; + phys_addr_t dbi_base; + phys_addr_t exs_base; +} synquacer_pci_bases[NUM_SQ_PCI_RC] = { + { + .cfg_base = SYNQUACER_PCI_SEG0_CONFIG_BASE, + .dbi_base = SYNQUACER_PCI_SEG0_DBI_BASE, + .exs_base = SYNQUACER_PCI_SEG0_EXS_BASE, + }, { + .cfg_base = SYNQUACER_PCI_SEG1_CONFIG_BASE, + .dbi_base = SYNQUACER_PCI_SEG1_DBI_BASE, + .exs_base = SYNQUACER_PCI_SEG1_EXS_BASE, + }, +}; + +/** + * struct synquacer_ecam_pcie - synquacer_ecam PCIe controller state + * @cfg_base: The base address of memory mapped configuration space + */ +struct synquacer_ecam_pcie { + void *cfg_base; + pci_size_t size; + void *dbi_base; + void *exs_base; + int first_busno; + + struct pci_region mem; + struct pci_region io; + struct pci_region mem64; +}; + +DECLARE_GLOBAL_DATA_PTR; + +/** + * pci_synquacer_ecam_conf_address() - Calculate the address of a config access + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @paddress: Pointer to the pointer to write the calculates address to + * + * Calculates the address that should be accessed to perform a PCIe + * configuration space access for a given device identified by the PCIe + * controller device @pcie and the bus, device & function numbers in @bdf. If + * access to the device is not valid then the function will return an error + * code. Otherwise the address to access will be written to the pointer pointed + * to by @paddress. + */ +static int pci_synquacer_ecam_conf_address(const struct udevice *bus, + pci_dev_t bdf, uint offset, + void **paddress) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(bus); + void *addr; + + addr = pcie->cfg_base; + addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; + addr += PCI_DEV(bdf) << 15; + addr += PCI_FUNC(bdf) << 12; + addr += offset; + *paddress = addr; + + return 0; +} + +static bool pci_synquacer_ecam_addr_valid(const struct udevice *bus, + pci_dev_t bdf) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(bus); + int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16); + + /* + * The Synopsys DesignWare PCIe controller in ECAM mode will not filter + * type 0 config TLPs sent to devices 1 and up on its downstream port, + * resulting in devices appearing multiple times on bus 0 unless we + * filter out those accesses here. + */ + if (PCI_BUS(bdf) == pcie->first_busno && PCI_DEV(bdf) > 0) + return false; + + return (PCI_BUS(bdf) >= pcie->first_busno && + PCI_BUS(bdf) < pcie->first_busno + num_buses); +} + +/** + * pci_synquacer_ecam_read_config() - Read from configuration space + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @valuep: A pointer at which to store the read value + * @size: Indicates the size of access to perform + * + * Read a value of size @size from offset @offset within the configuration + * space of the device identified by the bus, device & function numbers in @bdf + * on the PCI bus @bus. + */ +static int pci_synquacer_ecam_read_config(const struct udevice *bus, + pci_dev_t bdf, uint offset, + ulong *valuep, enum pci_size_t size) +{ + if (!pci_synquacer_ecam_addr_valid(bus, bdf)) { + *valuep = pci_get_ff(size); + return 0; + } + + return pci_generic_mmap_read_config(bus, pci_synquacer_ecam_conf_address, + bdf, offset, valuep, size); +} + +/** + * pci_synquacer_ecam_write_config() - Write to configuration space + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @value: The value to write + * @size: Indicates the size of access to perform + * + * Write the value @value of size @size from offset @offset within the + * configuration space of the device identified by the bus, device & function + * numbers in @bdf on the PCI bus @bus. + */ +static int pci_synquacer_ecam_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + if (!pci_synquacer_ecam_addr_valid(bus, bdf)) + return 0; + + return pci_generic_mmap_write_config(bus, pci_synquacer_ecam_conf_address, + bdf, offset, value, size); +} + +/** + * pci_synquacer_ecam_of_to_plat() - Translate from DT to device state + * @dev: A pointer to the device being operated on + * + * Translate relevant data from the device tree pertaining to device @dev into + * state that the driver will later make use of. This state is stored in the + * device's private data structure. + * + * Return: 0 on success, else -EINVAL + */ +static int pci_synquacer_ecam_of_to_plat(struct udevice *dev) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(dev); + struct fdt_resource reg_res; + int i, err; + + debug("%s: called for %s\n", __func__, dev->name); + + err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg", + 0, ®_res); + if (err < 0) { + pr_err("\"reg\" resource not found\n"); + return err; + } + + /* Find the correct pair of the DBI/EXS base address */ + for (i = 0; i < NUM_SQ_PCI_RC; i++) { + if (synquacer_pci_bases[i].cfg_base == reg_res.start) + break; + } + if (i == NUM_SQ_PCI_RC) { + pr_err("Unknown ECAM base address %lx.\n", + (unsigned long)reg_res.start); + return -ENOENT; + } + pcie->dbi_base = map_physmem(synquacer_pci_bases[i].dbi_base, + SYNQUACER_PCI_DBI_SIZE, MAP_NOCACHE); + if (!pcie->dbi_base) { + pr_err("Failed to map DBI for %s\n", dev->name); + return -ENOMEM; + } + + pcie->exs_base = map_physmem(synquacer_pci_bases[i].exs_base, + SYNQUACER_PCI_EXS_SIZE, MAP_NOCACHE); + if (!pcie->exs_base) { + pr_err("Failed to map EXS for %s\n", dev->name); + return -ENOMEM; + } + + pcie->size = fdt_resource_size(®_res); + pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE); + if (!pcie->cfg_base) { + pr_err("Failed to map config space for %s\n", dev->name); + return -ENOMEM; + } + debug("mappings DBI: %p EXS: %p CFG: %p\n", pcie->dbi_base, pcie->exs_base, pcie->cfg_base); + + return 0; +} + +static void pci_synquacer_pre_init(struct synquacer_ecam_pcie *pcie) +{ + void *base = pcie->exs_base; + + masked_writel(base, EM_SELECT, PRE_DET_STT_SEL, 0); + masked_writel(base, EM_CONTROL, PRE_DET_STT_REG, 0); + masked_writel(base, EM_CONTROL, PRE_DET_STT_REG, 1); + + /* 1: Assert all PHY / LINK resets */ + masked_writel(base, RESET_SELECT_1, PERST_SEL, 0); + masked_writel(base, RESET_CONTROL_1, PERST_N_I_REG, 0); + masked_writel(base, RESET_CONTROL_1, PERST_N_O_REG, 0); + + /* Device Reset(PERST#) is effective afrer Set device_type (RC) */ + masked_writel(base, RESET_SELECT_1, PWUP_RST_SEL, 0); + masked_writel(base, RESET_CONTROL_1, PWUP_RST_N_REG, 0); + masked_writel(base, RESET_SELECT_1, BUTTON_RST_SEL, 0); + masked_writel(base, RESET_CONTROL_1, BUTTON_RST_N_REG, 0); + masked_writel(base, RESET_SELECT_1, PWR_RST_SEL, 1); + masked_writel(base, RESET_SELECT_2, MSTR_ARST_SEL, 1); + masked_writel(base, RESET_SELECT_2, SLV_ARST_SEL, 1); + masked_writel(base, RESET_SELECT_2, DBI_ARST_SEL, 1); + masked_writel(base, RESET_SELECT_1, CORE_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, STI_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, N_STI_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, SQU_RST_SEL, 1); + masked_writel(base, RESET_SELECT_1, PHY_RST_SEL, 1); + + /* 2: Set P<n>_app_ltssm_enable='0' for reprogramming before linkup. */ + masked_writel(base, CORE_CONTROL, APP_LTSSM_ENABLE, 0); + + /* 3: Set device_type (RC) */ + masked_writel(base, CORE_CONTROL, DEVICE_TYPE, 4); +} + +static void pci_synquacer_dbi_init(void *dbi_base) +{ + masked_writel(dbi_base, MISC_CONTROL_1_OFF, DBI_RO_WR_EN, 1); + /* 4 Lanes */ + masked_writel(dbi_base, LINK_CAPABILITIES_REG, + PCIE_CAP_MAX_LINK_WIDTH, 4); + /* Gen 2 */ + masked_writel(dbi_base, LINK_CAPABILITIES_REG, + PCIE_CAP_MAX_LINK_SPEED, 2); + + masked_writel(dbi_base, TYPE1_CLASS_CODE_REV_ID_REG, + BASE_CLASS_CODE, BASE_CLASS_CODE_VALUE); + masked_writel(dbi_base, TYPE1_CLASS_CODE_REV_ID_REG, + SUBCLASS_CODE, SUBCLASS_CODE_VALUE); + masked_writel(dbi_base, TYPE1_CLASS_CODE_REV_ID_REG, + PROGRAM_INTERFACE, PROGRAM_INTERFACE_VALUE); + + masked_writel(dbi_base, MISC_CONTROL_1_OFF, DBI_RO_WR_EN, 0); +} + +static void pcie_sq_prog_outbound_atu(void *dbi_base, int index, + u64 cpu_base, u64 pci_base, u64 size, + u32 type, u32 flags) +{ + debug("%s: %p, %d, %llx, %llx, %llx, %x, %x\n", __func__, + dbi_base, index, cpu_base, pci_base, size, type, flags); + + writel(IATU_VIEWPORT_OUTBOUND | IATU_VIEWPORT_REGION_INDEX(index), + dbi_base + IATU_VIEWPORT_OFF); + + writel((u32)(cpu_base & 0xffffffff), + dbi_base + IATU_LWR_BASE_ADDR_OFF_OUTBOUND_0); + writel((u32)(cpu_base >> 32), + dbi_base + IATU_UPPER_BASE_ADDR_OFF_OUTBOUND_0); + writel((u32)(cpu_base + size - 1), + dbi_base + IATU_LIMIT_ADDR_OFF_OUTBOUND_0); + + writel((u32)(pci_base & 0xffffffff), + dbi_base + IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0); + writel((u32)(pci_base >> 32), + dbi_base + IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0); + + writel(type, dbi_base + IATU_REGION_CTRL_1_OFF_OUTBOUND_0); + writel(IATU_REGION_CTRL_2_OFF_OUTBOUND_0_REGION_EN | flags, + dbi_base + IATU_REGION_CTRL_2_OFF_OUTBOUND_0); +} + +static void pci_synquacer_post_init(struct synquacer_ecam_pcie *pcie) +{ + void *base = pcie->exs_base; + + /* + * 4: Set Bifurcation 1=disable 4=able + * 5: Supply Reference (It has executed) + * 6: Wait for 10usec (Reference Clocks is stable) + * 7: De assert PERST# + */ + masked_writel(base, RESET_CONTROL_1, PERST_N_I_REG, 1); + masked_writel(base, RESET_CONTROL_1, PERST_N_O_REG, 1); + + /* 8: Assert SYS_AUX_PWR_DET */ + masked_writel(base, PM_CONTROL_2, SYS_AUX_PWR_DET, 1); + + /* 9: Supply following clocks */ + masked_writel(base, AXI_CLK_STOP, MSTR_CSYSREQ_REG, 1); + masked_writel(base, AXI_CLK_STOP, MSTR_ACLK_STOP, 0); + masked_writel(base, AXI_CLK_STOP, SLV_CSYSREQ_REG, 1); + masked_writel(base, AXI_CLK_STOP, SLV_ACLK_STOP, 0); + masked_writel(base, AXI_CLK_STOP, DBI_CSYSREQ_REG, 1); + masked_writel(base, AXI_CLK_STOP, DBI_ACLK_STOP, 0); + + /* + * 10: De assert PHY reset + * 11: De assert LINK's PMC reset + */ + masked_writel(base, RESET_CONTROL_1, PWUP_RST_N_REG, 1); + masked_writel(base, RESET_CONTROL_1, BUTTON_RST_N_REG, 1); + + /* 12: PHY auto + * 13: Wrapper auto + * 14-17: PHY auto + * 18: Wrapper auto + * 19: Update registers through DBI AXI Slave interface + */ + pci_synquacer_dbi_init(pcie->dbi_base); + + or_writel(pcie->dbi_base, PCI_COMMAND, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* Force link speed change to Gen2 at link up */ + or_writel(pcie->dbi_base, GEN2_CONTROL_OFF, DIRECT_SPEED_CHANGE); + + /* Region 0: MMIO32 range */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 0, + pcie->mem.phys_start, + pcie->mem.bus_start, + pcie->mem.size, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM | + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TH, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_32BIT); + + /* Region 1: Type 0 config space */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 1, + (u64)pcie->cfg_base, + 0, + SIZE_64KB, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG0, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_CFG_SHIFT_MODE); + + /* Region 2: Type 1 config space */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 2, + (u64)pcie->cfg_base + SIZE_64KB, + 0, + (u64)pcie->io.phys_start - (u64)pcie->cfg_base - SIZE_64KB, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG1, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_CFG_SHIFT_MODE); + + /* Region 3: port I/O range */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 3, + pcie->io.phys_start, + pcie->io.bus_start, + pcie->io.size, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_IO, + 0); + + /* Region 4: MMIO64 range */ + pcie_sq_prog_outbound_atu(pcie->dbi_base, 4, + pcie->mem64.phys_start, + pcie->mem64.bus_start, + pcie->mem64.size, + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM | + IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TH, + IATU_REGION_CTRL_2_OFF_OUTBOUND_0_MSG_CODE_32BIT); + + /* enable link */ + if (masked_readl(base, CORE_CONTROL, APP_LTSSM_ENABLE) == 0) + masked_writel(base, CORE_CONTROL, APP_LTSSM_ENABLE, 1); +} + +static int pci_synquacer_ecam_probe(struct udevice *dev) +{ + struct synquacer_ecam_pcie *pcie = dev_get_priv(dev); + struct udevice *ctlr = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + + debug("Probe synquacer pcie for bus %d\n", dev_seq(dev)); + pcie->first_busno = dev_seq(dev); + + /* Store the IO and MEM windows settings for configuring ATU */ + pcie->io.phys_start = hose->regions[0].phys_start; /* IO base */ + pcie->io.bus_start = hose->regions[0].bus_start; /* IO_bus_addr */ + pcie->io.size = hose->regions[0].size; /* IO size */ + + pcie->mem.phys_start = hose->regions[1].phys_start; /* MEM base */ + pcie->mem.bus_start = hose->regions[1].bus_start; /* MEM_bus_addr */ + pcie->mem.size = hose->regions[1].size; /* MEM size */ + + pcie->mem64.phys_start = hose->regions[2].phys_start; /* MEM64 base */ + pcie->mem64.bus_start = hose->regions[2].bus_start; /* MEM64_bus_addr */ + pcie->mem64.size = hose->regions[2].size; /* MEM64 size */ + + pci_synquacer_pre_init(pcie); + + mdelay(150); + + pci_synquacer_post_init(pcie); + + /* It takes a while to stabilize the PCIe bus for scanning */ + mdelay(100); + + return 0; +} + +static const struct dm_pci_ops pci_synquacer_ecam_ops = { + .read_config = pci_synquacer_ecam_read_config, + .write_config = pci_synquacer_ecam_write_config, +}; + +static const struct udevice_id pci_synquacer_ecam_ids[] = { + { .compatible = "socionext,synquacer-pcie-ecam" }, + { } +}; + +U_BOOT_DRIVER(pci_synquacer_ecam) = { + .name = "pci_synquacer_ecam", + .id = UCLASS_PCI, + .of_match = pci_synquacer_ecam_ids, + .ops = &pci_synquacer_ecam_ops, + .probe = pci_synquacer_ecam_probe, + .of_to_plat = pci_synquacer_ecam_of_to_plat, + .priv_auto = sizeof(struct synquacer_ecam_pcie), +}; diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c index d8c6c2f6b5..d8dd5c1104 100644 --- a/drivers/serial/serial_msm.c +++ b/drivers/serial/serial_msm.c @@ -23,6 +23,7 @@ /* Serial registers - this driver works in uartdm mode*/ #define UARTDM_DMRX 0x34 /* Max RX transfer length */ +#define UARTDM_DMEN 0x3C /* DMA/data-packing mode */ #define UARTDM_NCF_TX 0x40 /* Number of chars to TX */ #define UARTDM_RXFS 0x50 /* RX channel status register */ @@ -197,6 +198,9 @@ static void uart_dm_init(struct msm_serial_data *priv) writel(MSM_BOOT_UART_DM_8_N_1_MODE, priv->base + UARTDM_MR2); writel(MSM_BOOT_UART_DM_CMD_RESET_RX, priv->base + UARTDM_CR); writel(MSM_BOOT_UART_DM_CMD_RESET_TX, priv->base + UARTDM_CR); + + /* Make sure BAM/single character mode is disabled */ + writel(0x0, priv->base + UARTDM_DMEN); } static int msm_serial_probe(struct udevice *dev) { diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e317d8a2c6..5c2a60a214 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -488,4 +488,12 @@ config MXC_SPI Enable the MXC SPI controller driver. This driver can be used on various i.MX SoCs such as i.MX31/35/51/6/7. +config SYNQUACER_SPI + bool "Socionext SynQuacer HS-SPI driver" + depends on ARCH_SYNQUACER + help + Enable the Socionext HS-SPI driver for SynQuacer. This driver can + be used to access the SPI interface and SPI NOR flash on platforms + embedding this HS-SPI IP core. + endif # menu "SPI Support" diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3dc83089b8..f70851e4bc 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o obj-$(CONFIG_FSL_ESPI) += fsl_espi.o obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o +obj-$(CONFIG_SYNQUACER_SPI) += spi-synquacer.o obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o diff --git a/drivers/spi/spi-synquacer.c b/drivers/spi/spi-synquacer.c new file mode 100644 index 0000000000..ce558c4bc0 --- /dev/null +++ b/drivers/spi/spi-synquacer.c @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * spi-synquacer.c - Socionext Synquacer SPI driver + * Copyright 2021 Linaro Ltd. + * Copyright 2021 Socionext, Inc. + */ + +#include <clk.h> +#include <common.h> +#include <dm.h> +#include <log.h> +#include <time.h> +#include <dm/device_compat.h> +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <spi.h> +#include <wait_bit.h> + +#define MCTRL 0x0 +#define MEN 0 +#define CSEN 1 +#define IPCLK 3 +#define MES 4 +#define SYNCON 5 + +#define PCC0 0x4 +#define PCC(n) (PCC0 + (n) * 4) +#define RTM 3 +#define ACES 2 +#define SAFESYNC 16 +#define CPHA 0 +#define CPOL 1 +#define SSPOL 4 +#define SDIR 7 +#define SS2CD 5 +#define SENDIAN 8 +#define CDRS_SHIFT 9 +#define CDRS_MASK 0x7f + +#define TXF 0x14 +#define TXE 0x18 +#define TXC 0x1c +#define RXF 0x20 +#define RXE 0x24 +#define RXC 0x28 +#define TFLETE 4 +#define RFMTE 5 + +#define FAULTF 0x2c +#define FAULTC 0x30 + +#define DMCFG 0x34 +#define SSDC 1 +#define MSTARTEN 2 + +#define DMSTART 0x38 +#define TRIGGER 0 +#define DMSTOP 8 +#define CS_MASK 3 +#define CS_SHIFT 16 +#define DATA_TXRX 0 +#define DATA_RX 1 +#define DATA_TX 2 +#define DATA_MASK 3 +#define DATA_SHIFT 26 +#define BUS_WIDTH 24 + +#define DMBCC 0x3c +#define DMSTATUS 0x40 +#define RX_DATA_MASK 0x1f +#define RX_DATA_SHIFT 8 +#define TX_DATA_MASK 0x1f +#define TX_DATA_SHIFT 16 + +#define TXBITCNT 0x44 + +#define FIFOCFG 0x4c +#define BPW_MASK 0x3 +#define BPW_SHIFT 8 +#define RX_FLUSH 11 +#define TX_FLUSH 12 +#define RX_TRSHLD_MASK 0xf +#define RX_TRSHLD_SHIFT 0 +#define TX_TRSHLD_MASK 0xf +#define TX_TRSHLD_SHIFT 4 + +#define TXFIFO 0x50 +#define RXFIFO 0x90 +#define MID 0xfc + +#define FIFO_DEPTH 16 +#define TX_TRSHLD 4 +#define RX_TRSHLD (FIFO_DEPTH - TX_TRSHLD) + +#define TXBIT 1 +#define RXBIT 2 + +DECLARE_GLOBAL_DATA_PTR; + +struct synquacer_spi_plat { + void __iomem *base; + bool aces, rtm; +}; + +struct synquacer_spi_priv { + void __iomem *base; + bool aces, rtm; + int speed, cs, mode, rwflag; + void *rx_buf; + const void *tx_buf; + unsigned int tx_words, rx_words; +}; + +static void read_fifo(struct synquacer_spi_priv *priv) +{ + u32 len = readl(priv->base + DMSTATUS); + u8 *buf = priv->rx_buf; + int i; + + len = (len >> RX_DATA_SHIFT) & RX_DATA_MASK; + len = min_t(unsigned int, len, priv->rx_words); + + for (i = 0; i < len; i++) + *buf++ = readb(priv->base + RXFIFO); + + priv->rx_buf = buf; + priv->rx_words -= len; +} + +static void write_fifo(struct synquacer_spi_priv *priv) +{ + u32 len = readl(priv->base + DMSTATUS); + const u8 *buf = priv->tx_buf; + int i; + + len = (len >> TX_DATA_SHIFT) & TX_DATA_MASK; + len = min_t(unsigned int, FIFO_DEPTH - len, priv->tx_words); + + for (i = 0; i < len; i++) + writeb(*buf++, priv->base + TXFIFO); + + priv->tx_buf = buf; + priv->tx_words -= len; +} + +static void synquacer_cs_set(struct synquacer_spi_priv *priv, bool active) +{ + u32 val; + + val = readl(priv->base + DMSTART); + val &= ~(CS_MASK << CS_SHIFT); + val |= priv->cs << CS_SHIFT; + + if (active) { + writel(val, priv->base + DMSTART); + + val = readl(priv->base + DMSTART); + val &= ~BIT(DMSTOP); + writel(val, priv->base + DMSTART); + } else { + val |= BIT(DMSTOP); + writel(val, priv->base + DMSTART); + + if (priv->rx_buf) { + u32 buf[16]; + + priv->rx_buf = buf; + priv->rx_words = 16; + read_fifo(priv); + } + } +} + +static void synquacer_spi_config(struct udevice *dev, void *rx, const void *tx) +{ + struct udevice *bus = dev->parent; + struct synquacer_spi_priv *priv = dev_get_priv(bus); + struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(dev); + u32 val, div, bus_width; + int rwflag; + + rwflag = (rx ? 1 : 0) | (tx ? 2 : 0); + + /* if nothing to do */ + if (slave_plat->mode == priv->mode && + rwflag == priv->rwflag && + slave_plat->cs == priv->cs && + slave_plat->max_hz == priv->speed) + return; + + priv->rwflag = rwflag; + priv->cs = slave_plat->cs; + priv->mode = slave_plat->mode; + priv->speed = slave_plat->max_hz; + + if (priv->mode & SPI_TX_BYTE) + bus_width = 1; + else if (priv->mode & SPI_TX_DUAL) + bus_width = 2; + else if (priv->mode & SPI_TX_QUAD) + bus_width = 4; + else if (priv->mode & SPI_TX_OCTAL) + bus_width = 8; + + div = DIV_ROUND_UP(125000000, priv->speed); + + val = readl(priv->base + PCC(priv->cs)); + val &= ~BIT(RTM); + val &= ~BIT(ACES); + val &= ~BIT(SAFESYNC); + if ((priv->mode & (SPI_TX_DUAL | SPI_RX_DUAL)) && div < 3) + val |= BIT(SAFESYNC); + if ((priv->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) && div < 6) + val |= BIT(SAFESYNC); + + if (priv->mode & SPI_CPHA) + val |= BIT(CPHA); + else + val &= ~BIT(CPHA); + + if (priv->mode & SPI_CPOL) + val |= BIT(CPOL); + else + val &= ~BIT(CPOL); + + if (priv->mode & SPI_CS_HIGH) + val |= BIT(SSPOL); + else + val &= ~BIT(SSPOL); + + if (priv->mode & SPI_LSB_FIRST) + val |= BIT(SDIR); + else + val &= ~BIT(SDIR); + + if (priv->aces) + val |= BIT(ACES); + + if (priv->rtm) + val |= BIT(RTM); + + val |= (3 << SS2CD); + val |= BIT(SENDIAN); + + val &= ~(CDRS_MASK << CDRS_SHIFT); + val |= ((div >> 1) << CDRS_SHIFT); + + writel(val, priv->base + PCC(priv->cs)); + + val = readl(priv->base + FIFOCFG); + val &= ~(BPW_MASK << BPW_SHIFT); + val |= (0 << BPW_SHIFT); + writel(val, priv->base + FIFOCFG); + + val = readl(priv->base + DMSTART); + val &= ~(DATA_MASK << DATA_SHIFT); + + if (tx && rx) + val |= (DATA_TXRX << DATA_SHIFT); + else if (rx) + val |= (DATA_RX << DATA_SHIFT); + else + val |= (DATA_TX << DATA_SHIFT); + + val &= ~(3 << BUS_WIDTH); + val |= ((bus_width >> 1) << BUS_WIDTH); + writel(val, priv->base + DMSTART); +} + +static int synquacer_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *tx_buf, void *rx_buf, + unsigned long flags) +{ + struct udevice *bus = dev->parent; + struct synquacer_spi_priv *priv = dev_get_priv(bus); + u32 val, words, busy; + + val = readl(priv->base + FIFOCFG); + val |= (1 << RX_FLUSH); + val |= (1 << TX_FLUSH); + writel(val, priv->base + FIFOCFG); + + synquacer_spi_config(dev, rx_buf, tx_buf); + + priv->tx_buf = tx_buf; + priv->rx_buf = rx_buf; + + words = bitlen / 8; + + if (tx_buf) { + busy |= BIT(TXBIT); + priv->tx_words = words; + } else { + busy &= ~BIT(TXBIT); + priv->tx_words = 0; + } + + if (rx_buf) { + busy |= BIT(RXBIT); + priv->rx_words = words; + } else { + busy &= ~BIT(RXBIT); + priv->rx_words = 0; + } + + if (flags & SPI_XFER_BEGIN) + synquacer_cs_set(priv, true); + + if (tx_buf) + write_fifo(priv); + + if (rx_buf) { + val = readl(priv->base + FIFOCFG); + val &= ~(RX_TRSHLD_MASK << RX_TRSHLD_SHIFT); + val |= ((priv->rx_words > FIFO_DEPTH ? + RX_TRSHLD : priv->rx_words) << RX_TRSHLD_SHIFT); + writel(val, priv->base + FIFOCFG); + } + + writel(~0, priv->base + TXC); + writel(~0, priv->base + RXC); + + /* Trigger */ + val = readl(priv->base + DMSTART); + val |= BIT(TRIGGER); + writel(val, priv->base + DMSTART); + + while (busy & (BIT(RXBIT) | BIT(TXBIT))) { + if (priv->rx_words) + read_fifo(priv); + else + busy &= ~BIT(RXBIT); + + if (priv->tx_words) { + write_fifo(priv); + } else { + u32 len; + + do { /* wait for shifter to empty out */ + cpu_relax(); + len = readl(priv->base + DMSTATUS); + len = (len >> TX_DATA_SHIFT) & TX_DATA_MASK; + } while (tx_buf && len); + busy &= ~BIT(TXBIT); + } + } + + if (flags & SPI_XFER_END) + synquacer_cs_set(priv, false); + + return 0; +} + +static int synquacer_spi_set_speed(struct udevice *bus, uint speed) +{ + return 0; +} + +static int synquacer_spi_set_mode(struct udevice *bus, uint mode) +{ + return 0; +} + +static int synquacer_spi_claim_bus(struct udevice *dev) +{ + return 0; +} + +static int synquacer_spi_release_bus(struct udevice *dev) +{ + return 0; +} + +static void synquacer_spi_disable_module(struct synquacer_spi_priv *priv) +{ + writel(0, priv->base + MCTRL); + while (readl(priv->base + MCTRL) & BIT(MES)) + cpu_relax(); +} + +static void synquacer_spi_init(struct synquacer_spi_priv *priv) +{ + u32 val; + + synquacer_spi_disable_module(priv); + + writel(0, priv->base + TXE); + writel(0, priv->base + RXE); + val = readl(priv->base + TXF); + writel(val, priv->base + TXC); + val = readl(priv->base + RXF); + writel(val, priv->base + RXC); + val = readl(priv->base + FAULTF); + writel(val, priv->base + FAULTC); + + val = readl(priv->base + DMCFG); + val &= ~BIT(SSDC); + val &= ~BIT(MSTARTEN); + writel(val, priv->base + DMCFG); + + /* Enable module with direct mode */ + val = readl(priv->base + MCTRL); + val &= ~BIT(IPCLK); + val &= ~BIT(CSEN); + val |= BIT(MEN); + val |= BIT(SYNCON); + writel(val, priv->base + MCTRL); +} + +static void synquacer_spi_exit(struct synquacer_spi_priv *priv) +{ + u32 val; + + synquacer_spi_disable_module(priv); + + /* Enable module with command sequence mode */ + val = readl(priv->base + MCTRL); + val &= ~BIT(IPCLK); + val |= BIT(CSEN); + val |= BIT(MEN); + val |= BIT(SYNCON); + writel(val, priv->base + MCTRL); + + while (!(readl(priv->base + MCTRL) & BIT(MES))) + cpu_relax(); +} + +static int synquacer_spi_probe(struct udevice *bus) +{ + struct synquacer_spi_plat *plat = dev_get_plat(bus); + struct synquacer_spi_priv *priv = dev_get_priv(bus); + + priv->base = plat->base; + priv->aces = plat->aces; + priv->rtm = plat->rtm; + + synquacer_spi_init(priv); + return 0; +} + +static int synquacer_spi_remove(struct udevice *bus) +{ + struct synquacer_spi_priv *priv = dev_get_priv(bus); + + synquacer_spi_exit(priv); + return 0; +} + +static int synquacer_spi_of_to_plat(struct udevice *bus) +{ + struct synquacer_spi_plat *plat = dev_get_plat(bus); + struct clk clk; + + plat->base = dev_read_addr_ptr(bus); + + plat->aces = dev_read_bool(bus, "socionext,set-aces"); + plat->rtm = dev_read_bool(bus, "socionext,use-rtm"); + + clk_get_by_name(bus, "iHCLK", &clk); + clk_enable(&clk); + + return 0; +} + +static const struct dm_spi_ops synquacer_spi_ops = { + .claim_bus = synquacer_spi_claim_bus, + .release_bus = synquacer_spi_release_bus, + .xfer = synquacer_spi_xfer, + .set_speed = synquacer_spi_set_speed, + .set_mode = synquacer_spi_set_mode, +}; + +static const struct udevice_id synquacer_spi_ids[] = { + { .compatible = "socionext,synquacer-spi" }, + { /* Sentinel */ } +}; + +U_BOOT_DRIVER(synquacer_spi) = { + .name = "synquacer_spi", + .id = UCLASS_SPI, + .of_match = synquacer_spi_ids, + .ops = &synquacer_spi_ops, + .of_to_plat = synquacer_spi_of_to_plat, + .plat_auto = sizeof(struct synquacer_spi_plat), + .priv_auto = sizeof(struct synquacer_spi_priv), + .probe = synquacer_spi_probe, + .flags = DM_FLAG_OS_PREPARE, + .remove = synquacer_spi_remove, +}; diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 5d2b77b4a3..465d9ce8e9 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -31,11 +31,6 @@ - GENERATED_GBL_DATA_SIZE) /* - * Serial Driver - */ -#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 */ - -/* * DMA */ #if !defined(CONFIG_SPL_BUILD) @@ -46,7 +41,6 @@ * I2C */ #define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_LPC32XX #define CONFIG_SYS_I2C_SPEED 100000 /* diff --git a/include/configs/ea-lpc3250devkitv2.h b/include/configs/ea-lpc3250devkitv2.h new file mode 100644 index 0000000000..c1a37c8a79 --- /dev/null +++ b/include/configs/ea-lpc3250devkitv2.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Embedded Artists LPC3250 DevKit v2 + * Copyright (C) 2021 Trevor Woerner <twoerner@gmail.com> + */ + +#ifndef __CONFIG_EA_LPC3250DEVKITV2_H__ +#define __CONFIG_EA_LPC3250DEVKITV2_H__ + +#include <linux/sizes.h> +#include <asm/arch/cpu.h> + +/* + * SoC and board defines + */ +#define CONFIG_MACH_TYPE MACH_TYPE_LPC3XXX +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_SIZE_LIMIT 0x000fffff /* maximum allowable size for full U-Boot binary */ + +/* + * RAM + */ +#define CONFIG_SYS_MALLOC_LEN SZ_4M +#define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE + +/* + * cmd + */ +#define CONFIG_SYS_LOAD_ADDR 0x80100000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE) + +/* + * SoC-specific config + */ +#include <asm/arch/config.h> + +#endif diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h new file mode 100644 index 0000000000..8fe10d7485 --- /dev/null +++ b/include/configs/synquacer.h @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016-2017 Socionext Inc. + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Timers for fasp(TIMCLK) */ +#define CONFIG_SYS_HZ 1000 /* 1 msec */ +#define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */ + +/* + * SDRAM (for initialize) + */ +#define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */ +#define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */ + +#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */ +#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE + +#define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */ + +/* + * Boot info + */ +#define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */ +#define CONFIG_SYS_MALLOC_LEN (0x01000000) /* 16Mbyte size of malloc() */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default kernel load address */ + +/* + * Hardware drivers support + */ + +/* RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 + +/* Serial (pl011) */ +#define UART_CLK (62500000) +#define CONFIG_SERIAL_MULTI +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK UART_CLK +#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)} + +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ + +/* Support MTD */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BASE (0x08000000) +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024)) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 128 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ +/* #define CONFIG_SYS_PCI_64BIT 1 */ + +#define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \ + "mtd nor1=u-boot.bin raw 200000 100000;" \ + "fip.bin raw 180000 78000;" \ + "optee.bin raw 500000 100000\0" + +/* Distro boot settings */ +#ifndef CONFIG_SPL_BUILD +#ifdef CONFIG_CMD_USB +#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0) +#else +#define BOOT_TARGET_DEVICE_USB(func) +#endif + +#ifdef CONFIG_CMD_MMC +#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) +#else +#define BOOT_TARGET_DEVICE_MMC(func) +#endif + +#ifdef CONFIG_CMD_NVME +#define BOOT_TARGET_DEVICE_NVME(func) func(NVME, nvme, 0) +#else +#define BOOT_TARGET_DEVICE_NVME(func) +#endif + +#ifdef CONFIG_CMD_SCSI +#define BOOT_TARGET_DEVICE_SCSI(func) func(SCSI, scsi, 0) func(SCSI, scsi, 1) +#else +#define BOOT_TARGET_DEVICE_SCSI(func) +#endif + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICE_USB(func) \ + BOOT_TARGET_DEVICE_MMC(func) \ + BOOT_TARGET_DEVICE_SCSI(func) \ + BOOT_TARGET_DEVICE_NVME(func) \ + +#include <config_distro_bootcmd.h> +#else /* CONFIG_SPL_BUILD */ +#define BOOTENV +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_addr_r=0x9fe00000\0" \ + "kernel_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "scriptaddr=0x88000000\0" \ + "pxefile_addr_r=0x88100000\0" \ + DEFAULT_DFU_ALT_INFO \ + BOOTENV + +#endif /* __CONFIG_H */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 7874b77f3f..d498c8f3bc 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -36,11 +36,6 @@ - GENERATED_GBL_DATA_SIZE) /* - * Serial Driver - */ -#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 - NS16550 */ - -/* * Ethernet Driver */ @@ -52,7 +47,6 @@ * I2C driver */ -#define CONFIG_SYS_I2C_LPC32XX #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SPEED 350000 diff --git a/include/dt-bindings/clock/lpc32xx-clock.h b/include/dt-bindings/clock/lpc32xx-clock.h new file mode 100644 index 0000000000..e624d3a527 --- /dev/null +++ b/include/dt-bindings/clock/lpc32xx-clock.h @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2015 Vladimir Zapolskiy <vz@mleia.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +#ifndef __DT_BINDINGS_LPC32XX_CLOCK_H +#define __DT_BINDINGS_LPC32XX_CLOCK_H + +/* LPC32XX System Control Block clocks */ +#define LPC32XX_CLK_RTC 1 +#define LPC32XX_CLK_DMA 2 +#define LPC32XX_CLK_MLC 3 +#define LPC32XX_CLK_SLC 4 +#define LPC32XX_CLK_LCD 5 +#define LPC32XX_CLK_MAC 6 +#define LPC32XX_CLK_SD 7 +#define LPC32XX_CLK_DDRAM 8 +#define LPC32XX_CLK_SSP0 9 +#define LPC32XX_CLK_SSP1 10 +#define LPC32XX_CLK_UART3 11 +#define LPC32XX_CLK_UART4 12 +#define LPC32XX_CLK_UART5 13 +#define LPC32XX_CLK_UART6 14 +#define LPC32XX_CLK_IRDA 15 +#define LPC32XX_CLK_I2C1 16 +#define LPC32XX_CLK_I2C2 17 +#define LPC32XX_CLK_TIMER0 18 +#define LPC32XX_CLK_TIMER1 19 +#define LPC32XX_CLK_TIMER2 20 +#define LPC32XX_CLK_TIMER3 21 +#define LPC32XX_CLK_TIMER4 22 +#define LPC32XX_CLK_TIMER5 23 +#define LPC32XX_CLK_WDOG 24 +#define LPC32XX_CLK_I2S0 25 +#define LPC32XX_CLK_I2S1 26 +#define LPC32XX_CLK_SPI1 27 +#define LPC32XX_CLK_SPI2 28 +#define LPC32XX_CLK_MCPWM 29 +#define LPC32XX_CLK_HSTIMER 30 +#define LPC32XX_CLK_KEY 31 +#define LPC32XX_CLK_PWM1 32 +#define LPC32XX_CLK_PWM2 33 +#define LPC32XX_CLK_ADC 34 +#define LPC32XX_CLK_HCLK_PLL 35 +#define LPC32XX_CLK_PERIPH 36 + +/* LPC32XX USB clocks */ +#define LPC32XX_USB_CLK_I2C 1 +#define LPC32XX_USB_CLK_DEVICE 2 +#define LPC32XX_USB_CLK_HOST 3 + +#endif /* __DT_BINDINGS_LPC32XX_CLOCK_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index e549a5557f..ca6066b85e 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2542,7 +2542,6 @@ CONFIG_SYS_I2C_INIT_BOARD CONFIG_SYS_I2C_LDI_ADDR CONFIG_SYS_I2C_LM75_ADDR CONFIG_SYS_I2C_LM90_ADDR -CONFIG_SYS_I2C_LPC32XX CONFIG_SYS_I2C_LPC32XX_SLAVE CONFIG_SYS_I2C_LPC32XX_SPEED CONFIG_SYS_I2C_MAC1_BUS @@ -2734,7 +2733,6 @@ CONFIG_SYS_LOW CONFIG_SYS_LOWMEM_BASE CONFIG_SYS_LOW_RES_TIMER CONFIG_SYS_LPAE_SDRAM_BASE -CONFIG_SYS_LPC32XX_UART CONFIG_SYS_LS1_DDR_BLOCK1_SIZE CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS |