From cc1d2806bf06ab92268343d26eb3d8d8f00f8bc9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 16 May 2012 23:50:20 +0200 Subject: cfg80211: provide channel to join_mesh function Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/mesh.c | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 89 insertions(+), 2 deletions(-) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 2749cb86b462..2e3b700eba32 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -65,6 +65,9 @@ const struct mesh_config default_mesh_config = { }; const struct mesh_setup default_mesh_setup = { + /* cfg80211_join_mesh() will pick a channel if needed */ + .channel = NULL, + .channel_type = NL80211_CHAN_NO_HT, .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, .path_metric = IEEE80211_PATH_METRIC_AIRTIME, @@ -75,7 +78,7 @@ const struct mesh_setup default_mesh_setup = { int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; @@ -101,6 +104,51 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, if (!rdev->ops->join_mesh) return -EOPNOTSUPP; + if (!setup->channel) { + /* if no channel explicitly given, use preset channel */ + setup->channel = wdev->preset_chan; + setup->channel_type = wdev->preset_chantype; + } + + if (!setup->channel) { + /* if we don't have that either, use the first usable channel */ + enum ieee80211_band band; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + int i; + + sband = rdev->wiphy.bands[band]; + if (!sband) + continue; + + for (i = 0; i < sband->n_channels; i++) { + chan = &sband->channels[i]; + if (chan->flags & (IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_PASSIVE_SCAN | + IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_RADAR)) + continue; + setup->channel = chan; + break; + } + + if (setup->channel) + break; + } + + /* no usable channel ... */ + if (!setup->channel) + return -EINVAL; + + setup->channel_type = NL80211_CHAN_NO_HT; + } + + if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel, + setup->channel_type)) + return -EINVAL; + err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup); if (!err) { memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); @@ -112,7 +160,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; @@ -125,6 +173,45 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, return err; } +int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, int freq, + enum nl80211_channel_type channel_type) +{ + struct ieee80211_channel *channel; + + /* + * Workaround for libertas (only!), it puts the interface + * into mesh mode but doesn't implement join_mesh. Instead, + * it is configured via sysfs and then joins the mesh when + * you set the channel. Note that the libertas mesh isn't + * compatible with 802.11 mesh. + */ + if (!rdev->ops->join_mesh) { + int err; + + if (!netif_running(wdev->netdev)) + return -ENETDOWN; + wdev_lock(wdev); + err = cfg80211_set_freq(rdev, wdev, freq, channel_type); + wdev_unlock(wdev); + + return err; + } + + if (wdev->mesh_id_len) + return -EBUSY; + + channel = rdev_freq_to_chan(rdev, freq, channel_type); + if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy, + channel, + channel_type)) { + return -EINVAL; + } + wdev->preset_chan = channel; + wdev->preset_chantype = channel_type; + return 0; +} + void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp) { -- cgit v1.2.3 From e8c9bd5b8d807cfe6c923265969a523b1ba1e6c2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Jun 2012 08:18:22 +0200 Subject: cfg80211: clarify set_channel APIs Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/mesh.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 2e3b700eba32..b44c736bf9cf 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -179,6 +179,13 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, { struct ieee80211_channel *channel; + channel = rdev_freq_to_chan(rdev, freq, channel_type); + if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy, + channel, + channel_type)) { + return -EINVAL; + } + /* * Workaround for libertas (only!), it puts the interface * into mesh mode but doesn't implement join_mesh. Instead, @@ -186,27 +193,20 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, * you set the channel. Note that the libertas mesh isn't * compatible with 802.11 mesh. */ - if (!rdev->ops->join_mesh) { - int err; + if (rdev->ops->libertas_set_mesh_channel) { + if (channel_type != NL80211_CHAN_NO_HT) + return -EINVAL; if (!netif_running(wdev->netdev)) return -ENETDOWN; - wdev_lock(wdev); - err = cfg80211_set_freq(rdev, wdev, freq, channel_type); - wdev_unlock(wdev); - - return err; + return rdev->ops->libertas_set_mesh_channel(&rdev->wiphy, + wdev->netdev, + channel); } if (wdev->mesh_id_len) return -EBUSY; - channel = rdev_freq_to_chan(rdev, freq, channel_type); - if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy, - channel, - channel_type)) { - return -EINVAL; - } wdev->preset_chan = channel; wdev->preset_chantype = channel_type; return 0; -- cgit v1.2.3 From ac1073a61d73b6277794d2efc872eb7e1b706b5c Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:06 +0800 Subject: {nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index b44c736bf9cf..2f141cfd581e 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -14,6 +14,8 @@ #define MESH_PATH_TIMEOUT 5000 #define MESH_RANN_INTERVAL 5000 +#define MESH_PATH_TO_ROOT_TIMEOUT 6000 +#define MESH_ROOT_INTERVAL 5000 /* * Minimum interval between two consecutive PREQs originated by the same @@ -62,6 +64,8 @@ const struct mesh_config default_mesh_config = { .dot11MeshForwarding = true, .rssi_threshold = MESH_RSSI_THRESHOLD, .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED, + .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, + .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, }; const struct mesh_setup default_mesh_setup = { -- cgit v1.2.3 From 728b19e5fb9bbebbd580784a092b786fe379ed8e Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:10 +0800 Subject: {nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationInterval As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 2f141cfd581e..3b73b07486cf 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -16,6 +16,7 @@ #define MESH_RANN_INTERVAL 5000 #define MESH_PATH_TO_ROOT_TIMEOUT 6000 #define MESH_ROOT_INTERVAL 5000 +#define MESH_ROOT_CONFIRMATION_INTERVAL 2000 /* * Minimum interval between two consecutive PREQs originated by the same @@ -66,6 +67,7 @@ const struct mesh_config default_mesh_config = { .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED, .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, + .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL, }; const struct mesh_setup default_mesh_setup = { -- cgit v1.2.3 From f4489ebeffa436c8427a20e2f05004e783708cde Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 29 Jun 2012 12:46:58 +0200 Subject: cfg80211: add channel tracking for AP and mesh We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 3b73b07486cf..bab381344723 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -159,6 +159,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, if (!err) { memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); wdev->mesh_id_len = setup->mesh_id_len; + wdev->channel = setup->channel; } return err; @@ -184,6 +185,7 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, enum nl80211_channel_type channel_type) { struct ieee80211_channel *channel; + int err; channel = rdev_freq_to_chan(rdev, freq, channel_type); if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy, @@ -205,9 +207,14 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, if (!netif_running(wdev->netdev)) return -ENETDOWN; - return rdev->ops->libertas_set_mesh_channel(&rdev->wiphy, - wdev->netdev, - channel); + + err = rdev->ops->libertas_set_mesh_channel(&rdev->wiphy, + wdev->netdev, + channel); + if (!err) + wdev->channel = channel; + + return err; } if (wdev->mesh_id_len) @@ -249,8 +256,11 @@ static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, return -ENOTCONN; err = rdev->ops->leave_mesh(&rdev->wiphy, dev); - if (!err) + if (!err) { wdev->mesh_id_len = 0; + wdev->channel = NULL; + } + return err; } -- cgit v1.2.3 From e4e32459c2daea59516da59999706b357e6eb480 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 29 Jun 2012 12:47:08 +0200 Subject: cfg80211: respect iface combinations when starting operation devlist_mtx locking is changed to accomodate changes. Signed-off-by: Michal Kazior Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index bab381344723..c384e77ff77a 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -155,6 +155,11 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, setup->channel_type)) return -EINVAL; + err = cfg80211_can_use_chan(rdev, wdev, setup->channel, + CHAN_MODE_SHARED); + if (err) + return err; + err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup); if (!err) { memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); @@ -173,9 +178,11 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev = dev->ieee80211_ptr; int err; + mutex_lock(&rdev->devlist_mtx); wdev_lock(wdev); err = __cfg80211_join_mesh(rdev, dev, setup, conf); wdev_unlock(wdev); + mutex_unlock(&rdev->devlist_mtx); return err; } @@ -208,6 +215,11 @@ int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, if (!netif_running(wdev->netdev)) return -ENETDOWN; + err = cfg80211_can_use_chan(rdev, wdev, channel, + CHAN_MODE_SHARED); + if (err) + return err; + err = rdev->ops->libertas_set_mesh_channel(&rdev->wiphy, wdev->netdev, channel); -- cgit v1.2.3