From 7db94e210351e8578d4a98fed3edd4df5f10ae9d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 7 Dec 2009 14:54:45 -0500 Subject: mac80211: parse the HT capabilities info through debugfs When debugging you want to be lazy and not have to parse bits yourself so let mac80211 debugfs do the parsing for you. This is what I get against my WRT610N: root@tux:~# cat /sys/kernel/debug/ieee80211/phy0/stations/00\:22\:6b\:aa\:bb\:01/ht_capa ht supported cap: 0x000e HT20/HT40 SM Power Save disabled No RX STBC Max AMSDU length: 7935 bytes No DSSS/CCK HT40 ampdu factor/density: 2/6 MCS mask: ff ff 00 00 00 00 00 00 00 00 MCS rx highest: 0 MCS tx params: 0 Cc: johannes@sipsolutions.net Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/debugfs_sta.c | 48 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) (limited to 'net/mac80211/debugfs_sta.c') diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 9a1d1e40eca8..c833b6ce9902 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -160,7 +160,12 @@ STA_OPS(agg_status); static ssize_t sta_ht_capa_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { - char buf[200], *p = buf; +#define PRINT_HT_CAP(_cond, _str) \ + do { \ + if (_cond) \ + p += scnprintf(p, sizeof(buf)+buf-p, "\t" _str "\n"); \ + } while (0) + char buf[1024], *p = buf; int i; struct sta_info *sta = file->private_data; struct ieee80211_sta_ht_cap *htc = &sta->sta.ht_cap; @@ -169,6 +174,47 @@ static ssize_t sta_ht_capa_read(struct file *file, char __user *userbuf, htc->ht_supported ? "" : "not "); if (htc->ht_supported) { p += scnprintf(p, sizeof(buf)+buf-p, "cap: %#.4x\n", htc->cap); + + PRINT_HT_CAP((htc->cap & BIT(0)), "RX LDCP"); + PRINT_HT_CAP((htc->cap & BIT(1)), "HT20/HT40"); + PRINT_HT_CAP(!(htc->cap & BIT(1)), "HT20"); + + PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 0, "Static SM Power Save"); + PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 1, "Dynamic SM Power Save"); + PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 3, "SM Power Save disabled"); + + PRINT_HT_CAP((htc->cap & BIT(4)), "RX Greenfield"); + PRINT_HT_CAP((htc->cap & BIT(5)), "RX HT20 SGI"); + PRINT_HT_CAP((htc->cap & BIT(6)), "RX HT40 SGI"); + PRINT_HT_CAP((htc->cap & BIT(7)), "TX STBC"); + + PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 0, "No RX STBC"); + PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 1, "RX STBC 1-stream"); + PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 2, "RX STBC 2-streams"); + PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 3, "RX STBC 3-streams"); + + PRINT_HT_CAP((htc->cap & BIT(10)), "HT Delayed Block Ack"); + + PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: " + "3839 bytes"); + PRINT_HT_CAP(!(htc->cap & BIT(11)), "Max AMSDU length: " + "7935 bytes"); + + /* + * For beacons and probe response this would mean the BSS + * does or does not allow the usage of DSSS/CCK HT40. + * Otherwise it means the STA does or does not use + * DSSS/CCK HT40. + */ + PRINT_HT_CAP((htc->cap & BIT(12)), "DSSS/CCK HT40"); + PRINT_HT_CAP(!(htc->cap & BIT(12)), "No DSSS/CCK HT40"); + + /* BIT(13) is reserved */ + + PRINT_HT_CAP((htc->cap & BIT(14)), "40 MHz Intolerant"); + + PRINT_HT_CAP((htc->cap & BIT(15)), "L-SIG TXOP protection"); + p += scnprintf(p, sizeof(buf)+buf-p, "ampdu factor/density: %d/%d\n", htc->ampdu_factor, htc->ampdu_density); p += scnprintf(p, sizeof(buf)+buf-p, "MCS mask:"); -- cgit v1.2.3