From 079a176d87a4da4cb18864c54d3932131e11e229 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Sep 2010 17:31:29 +0900 Subject: spi: omap2_mcspi: make use of dev_vdbg() dev_vdbg() is only compiled when VERBOSE is defined, so there's no need to wrap dev_dbg() on #ifdef VERBOSE .. #endif as we can use dev_vdbg() directly. Signed-off-by: Felipe Balbi Signed-off-by: Grant Likely --- drivers/spi/omap2_mcspi.c | 36 +++++++++--------------------------- 1 file changed, 9 insertions(+), 27 deletions(-) (limited to 'drivers/spi/omap2_mcspi.c') diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index b3a94ca0a75a..d70392795055 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -489,10 +489,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %02x\n", + dev_vdbg(&spi->dev, "write-%d %02x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -506,10 +504,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -522,10 +518,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 16) { @@ -542,10 +536,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %04x\n", + dev_vdbg(&spi->dev, "write-%d %04x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -559,10 +551,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -575,10 +565,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 32) { @@ -595,10 +583,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %08x\n", + dev_vdbg(&spi->dev, "write-%d %08x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -612,10 +598,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -628,10 +612,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif } } while (c); } -- cgit v1.2.3 From e1993ed6420afd4421336d75e73641f75da87a7f Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 19 Oct 2010 18:03:27 +0800 Subject: spi/omap2_mcspi: disable channel after TX_ONLY transfer in PIO mode In the TX_ONLY transfer, the SPI controller also receives data simultaneously and saves them in the rx register. After the TX_ONLY transfer, the rx register will hold the random data received during the last tx transaction. If the direct following transfer is RX_ONLY, this random data has the possibility to affect this transfer like this: When the SPI controller is changed from TX_ONLY to RX_ONLY, the random data makes the rx register full immediately and triggers a dummy write automatically(in SPI RX_ONLY transfers, we need a dummy write to trigger the first transaction). So the first data received in the RX_ONLY transfer will be that random data instead of something meaningful. We can avoid this by inserting a Disable/Re-enable toggle of the channel after the TX_ONLY transfer, since it purges the rx register. Signed-off-by: Jason Wang Tested-by: Grazvydas Ignotas Acked-by: Tony Lindgren Signed-off-by: Grant Likely --- drivers/spi/omap2_mcspi.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/spi/omap2_mcspi.c') diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index d70392795055..27a3fa1f3bf4 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -626,6 +626,12 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } else if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_EOT) < 0) dev_err(&spi->dev, "EOT timed out\n"); + + /* disable chan to purge rx datas received in TX_ONLY transfer, + * otherwise these rx datas will affect the direct following + * RX_ONLY transfer. + */ + omap2_mcspi_set_enable(spi, 0); } out: omap2_mcspi_set_enable(spi, 1); -- cgit v1.2.3 From 2764c500be0c1f057349ee6c81557239de060f87 Mon Sep 17 00:00:00 2001 From: Ilkka Koskinen Date: Tue, 19 Oct 2010 17:07:31 +0300 Subject: spi/omap2_mcspi: Verify TX reg is empty after TX only xfer with DMA In case of TX only with DMA, the driver assumes that the data has been transferred once DMA callback in invoked. However, SPI's shift register may still contain data. Thus, the driver is supposed to verify that the register is empty and the end of the SPI transfer has been reached. Signed-off-by: Ilkka Koskinen Tested-by: Tuomas Katila Acked-by: Tony Lindgren Signed-off-by: Grant Likely --- drivers/spi/omap2_mcspi.c | 39 ++++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 13 deletions(-) (limited to 'drivers/spi/omap2_mcspi.c') diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 27a3fa1f3bf4..2a651e61bfbf 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -296,6 +296,19 @@ static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) return 0; } +static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(__raw_readl(reg) & bit)) { + if (time_after(jiffies, timeout)) + return -1; + cpu_relax(); + } + return 0; +} + static unsigned omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) { @@ -309,11 +322,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) u32 l; u8 * rx; const u8 * tx; + void __iomem *chstat_reg; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; l = mcspi_cached_chconf0(spi); + chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + count = xfer->len; c = count; word_len = cs->word_len; @@ -382,6 +398,16 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (tx != NULL) { wait_for_completion(&mcspi_dma->dma_tx_completion); dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); + + /* for TX_ONLY mode, be sure all words have shifted out */ + if (rx == NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) + dev_err(&spi->dev, "TXS timed out\n"); + else if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0) + dev_err(&spi->dev, "EOT timed out\n"); + } } if (rx != NULL) { @@ -435,19 +461,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) return count; } -static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(1000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - static unsigned omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) { -- cgit v1.2.3