From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/ide-scsi.c | 1174 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1174 insertions(+) create mode 100644 drivers/scsi/ide-scsi.c (limited to 'drivers/scsi/ide-scsi.c') diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c new file mode 100644 index 000000000000..2e2486b035dd --- /dev/null +++ b/drivers/scsi/ide-scsi.c @@ -0,0 +1,1174 @@ +/* + * linux/drivers/scsi/ide-scsi.c Version 0.9 Jul 4, 1999 + * + * Copyright (C) 1996 - 1999 Gadi Oxman + */ + +/* + * Emulation of a SCSI host adapter for IDE ATAPI devices. + * + * With this driver, one can use the Linux SCSI drivers instead of the + * native IDE ATAPI drivers. + * + * Ver 0.1 Dec 3 96 Initial version. + * Ver 0.2 Jan 26 97 Fixed bug in cleanup_module() and added emulation + * of MODE_SENSE_6/MODE_SELECT_6 for cdroms. Thanks + * to Janos Farkas for pointing this out. + * Avoid using bitfields in structures for m68k. + * Added Scatter/Gather and DMA support. + * Ver 0.4 Dec 7 97 Add support for ATAPI PD/CD drives. + * Use variable timeout for each command. + * Ver 0.5 Jan 2 98 Fix previous PD/CD support. + * Allow disabling of SCSI-6 to SCSI-10 transformation. + * Ver 0.6 Jan 27 98 Allow disabling of SCSI command translation layer + * for access through /dev/sg. + * Fix MODE_SENSE_6/MODE_SELECT_6/INQUIRY translation. + * Ver 0.7 Dec 04 98 Ignore commands where lun != 0 to avoid multiple + * detection of devices with CONFIG_SCSI_MULTI_LUN + * Ver 0.8 Feb 05 99 Optical media need translation too. Reverse 0.7. + * Ver 0.9 Jul 04 99 Fix a bug in SG_SET_TRANSFORM. + * Ver 0.91 Jun 10 02 Fix "off by one" error in transforms + * Ver 0.92 Dec 31 02 Implement new SCSI mid level API + */ + +#define IDESCSI_VERSION "0.92" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define IDESCSI_DEBUG_LOG 0 + +typedef struct idescsi_pc_s { + u8 c[12]; /* Actual packet bytes */ + int request_transfer; /* Bytes to transfer */ + int actually_transferred; /* Bytes actually transferred */ + int buffer_size; /* Size of our data buffer */ + struct request *rq; /* The corresponding request */ + u8 *buffer; /* Data buffer */ + u8 *current_position; /* Pointer into the above buffer */ + struct scatterlist *sg; /* Scatter gather table */ + int b_count; /* Bytes transferred from current entry */ + struct scsi_cmnd *scsi_cmd; /* SCSI command */ + void (*done)(struct scsi_cmnd *); /* Scsi completion routine */ + unsigned long flags; /* Status/Action flags */ + unsigned long timeout; /* Command timeout */ +} idescsi_pc_t; + +/* + * Packet command status bits. + */ +#define PC_DMA_IN_PROGRESS 0 /* 1 while DMA in progress */ +#define PC_WRITING 1 /* Data direction */ +#define PC_TRANSFORM 2 /* transform SCSI commands */ +#define PC_TIMEDOUT 3 /* command timed out */ +#define PC_DMA_OK 4 /* Use DMA */ + +/* + * SCSI command transformation layer + */ +#define IDESCSI_TRANSFORM 0 /* Enable/Disable transformation */ +#define IDESCSI_SG_TRANSFORM 1 /* /dev/sg transformation */ + +/* + * Log flags + */ +#define IDESCSI_LOG_CMD 0 /* Log SCSI commands */ + +typedef struct ide_scsi_obj { + ide_drive_t *drive; + ide_driver_t *driver; + struct gendisk *disk; + struct Scsi_Host *host; + + idescsi_pc_t *pc; /* Current packet command */ + unsigned long flags; /* Status/Action flags */ + unsigned long transform; /* SCSI cmd translation layer */ + unsigned long log; /* log flags */ +} idescsi_scsi_t; + +static DECLARE_MUTEX(idescsi_ref_sem); + +#define ide_scsi_g(disk) \ + container_of((disk)->private_data, struct ide_scsi_obj, driver) + +static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk) +{ + struct ide_scsi_obj *scsi = NULL; + + down(&idescsi_ref_sem); + scsi = ide_scsi_g(disk); + if (scsi) + scsi_host_get(scsi->host); + up(&idescsi_ref_sem); + return scsi; +} + +static void ide_scsi_put(struct ide_scsi_obj *scsi) +{ + down(&idescsi_ref_sem); + scsi_host_put(scsi->host); + up(&idescsi_ref_sem); +} + +static inline idescsi_scsi_t *scsihost_to_idescsi(struct Scsi_Host *host) +{ + return (idescsi_scsi_t*) (&host[1]); +} + +static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) +{ + return scsihost_to_idescsi(ide_drive->driver_data); +} + +/* + * Per ATAPI device status bits. + */ +#define IDESCSI_DRQ_INTERRUPT 0 /* DRQ interrupt device */ + +/* + * ide-scsi requests. + */ +#define IDESCSI_PC_RQ 90 + +static void idescsi_discard_data (ide_drive_t *drive, unsigned int bcount) +{ + while (bcount--) + (void) HWIF(drive)->INB(IDE_DATA_REG); +} + +static void idescsi_output_zeros (ide_drive_t *drive, unsigned int bcount) +{ + while (bcount--) + HWIF(drive)->OUTB(0, IDE_DATA_REG); +} + +/* + * PIO data transfer routines using the scatter gather table. + */ +static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount) +{ + int count; + char *buf; + + while (bcount) { + if (pc->sg - (struct scatterlist *) pc->scsi_cmd->request_buffer > pc->scsi_cmd->use_sg) { + printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n"); + idescsi_discard_data (drive, bcount); + return; + } + count = min(pc->sg->length - pc->b_count, bcount); + buf = page_address(pc->sg->page) + pc->sg->offset; + drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count); + bcount -= count; pc->b_count += count; + if (pc->b_count == pc->sg->length) { + pc->sg++; + pc->b_count = 0; + } + } +} + +static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount) +{ + int count; + char *buf; + + while (bcount) { + if (pc->sg - (struct scatterlist *) pc->scsi_cmd->request_buffer > pc->scsi_cmd->use_sg) { + printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n"); + idescsi_output_zeros (drive, bcount); + return; + } + count = min(pc->sg->length - pc->b_count, bcount); + buf = page_address(pc->sg->page) + pc->sg->offset; + drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count); + bcount -= count; pc->b_count += count; + if (pc->b_count == pc->sg->length) { + pc->sg++; + pc->b_count = 0; + } + } +} + +/* + * Most of the SCSI commands are supported directly by ATAPI devices. + * idescsi_transform_pc handles the few exceptions. + */ +static inline void idescsi_transform_pc1 (ide_drive_t *drive, idescsi_pc_t *pc) +{ + u8 *c = pc->c, *scsi_buf = pc->buffer, *sc = pc->scsi_cmd->cmnd; + char *atapi_buf; + + if (!test_bit(PC_TRANSFORM, &pc->flags)) + return; + if (drive->media == ide_cdrom || drive->media == ide_optical) { + if (c[0] == READ_6 || c[0] == WRITE_6) { + c[8] = c[4]; c[5] = c[3]; c[4] = c[2]; + c[3] = c[1] & 0x1f; c[2] = 0; c[1] &= 0xe0; + c[0] += (READ_10 - READ_6); + } + if (c[0] == MODE_SENSE || c[0] == MODE_SELECT) { + unsigned short new_len; + if (!scsi_buf) + return; + if ((atapi_buf = kmalloc(pc->buffer_size + 4, GFP_ATOMIC)) == NULL) + return; + memset(atapi_buf, 0, pc->buffer_size + 4); + memset (c, 0, 12); + c[0] = sc[0] | 0x40; + c[1] = sc[1]; + c[2] = sc[2]; + new_len = sc[4] + 4; + c[8] = new_len; + c[7] = new_len >> 8; + c[9] = sc[5]; + if (c[0] == MODE_SELECT_10) { + atapi_buf[1] = scsi_buf[0]; /* Mode data length */ + atapi_buf[2] = scsi_buf[1]; /* Medium type */ + atapi_buf[3] = scsi_buf[2]; /* Device specific parameter */ + atapi_buf[7] = scsi_buf[3]; /* Block descriptor length */ + memcpy(atapi_buf + 8, scsi_buf + 4, pc->buffer_size - 4); + } + pc->buffer = atapi_buf; + pc->request_transfer += 4; + pc->buffer_size += 4; + } + } +} + +static inline void idescsi_transform_pc2 (ide_drive_t *drive, idescsi_pc_t *pc) +{ + u8 *atapi_buf = pc->buffer; + u8 *sc = pc->scsi_cmd->cmnd; + u8 *scsi_buf = pc->scsi_cmd->request_buffer; + + if (!test_bit(PC_TRANSFORM, &pc->flags)) + return; + if (drive->media == ide_cdrom || drive->media == ide_optical) { + if (pc->c[0] == MODE_SENSE_10 && sc[0] == MODE_SENSE) { + scsi_buf[0] = atapi_buf[1]; /* Mode data length */ + scsi_buf[1] = atapi_buf[2]; /* Medium type */ + scsi_buf[2] = atapi_buf[3]; /* Device specific parameter */ + scsi_buf[3] = atapi_buf[7]; /* Block descriptor length */ + memcpy(scsi_buf + 4, atapi_buf + 8, pc->request_transfer - 8); + } + if (pc->c[0] == INQUIRY) { + scsi_buf[2] |= 2; /* ansi_revision */ + scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2; /* response data format */ + } + } + if (atapi_buf && atapi_buf != scsi_buf) + kfree(atapi_buf); +} + +static void hexdump(u8 *x, int len) +{ + int i; + + printk("[ "); + for (i = 0; i < len; i++) + printk("%x ", x[i]); + printk("]\n"); +} + +static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + idescsi_pc_t *pc; + struct request *rq; + u8 *buf; + + /* stuff a sense request in front of our current request */ + pc = kmalloc (sizeof (idescsi_pc_t), GFP_ATOMIC); + rq = kmalloc (sizeof (struct request), GFP_ATOMIC); + buf = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC); + if (pc == NULL || rq == NULL || buf == NULL) { + if (pc) kfree(pc); + if (rq) kfree(rq); + if (buf) kfree(buf); + return -ENOMEM; + } + memset (pc, 0, sizeof (idescsi_pc_t)); + memset (buf, 0, SCSI_SENSE_BUFFERSIZE); + ide_init_drive_cmd(rq); + rq->special = (char *) pc; + pc->rq = rq; + pc->buffer = buf; + pc->c[0] = REQUEST_SENSE; + pc->c[4] = pc->request_transfer = pc->buffer_size = SCSI_SENSE_BUFFERSIZE; + rq->flags = REQ_SENSE; + pc->timeout = jiffies + WAIT_READY; + /* NOTE! Save the failed packet command in "rq->buffer" */ + rq->buffer = (void *) failed_command->special; + pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd; + if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { + printk ("ide-scsi: %s: queue cmd = ", drive->name); + hexdump(pc->c, 6); + } + rq->rq_disk = scsi->disk; + return ide_do_drive_cmd(drive, rq, ide_preempt); +} + +static int idescsi_end_request(ide_drive_t *, int, int); + +static ide_startstop_t +idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) +{ + if (HWIF(drive)->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT)) + /* force an abort */ + HWIF(drive)->OUTB(WIN_IDLEIMMEDIATE,IDE_COMMAND_REG); + + rq->errors++; + + idescsi_end_request(drive, 0, 0); + + return ide_stopped; +} + +static ide_startstop_t +idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) +{ +#if IDESCSI_DEBUG_LOG + printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n", + ((idescsi_pc_t *) rq->special)->scsi_cmd->serial_number); +#endif + rq->errors |= ERROR_MAX; + + idescsi_end_request(drive, 0, 0); + + return ide_stopped; +} + +static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + struct request *rq = HWGROUP(drive)->rq; + idescsi_pc_t *pc = (idescsi_pc_t *) rq->special; + int log = test_bit(IDESCSI_LOG_CMD, &scsi->log); + struct Scsi_Host *host; + u8 *scsi_buf; + unsigned long flags; + + if (!(rq->flags & (REQ_SPECIAL|REQ_SENSE))) { + ide_end_request(drive, uptodate, nrsecs); + return 0; + } + ide_end_drive_cmd (drive, 0, 0); + if (rq->flags & REQ_SENSE) { + idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; + if (log) { + printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); + hexdump(pc->buffer,16); + } + memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE); + kfree(pc->buffer); + kfree(pc); + kfree(rq); + pc = opc; + rq = pc->rq; + pc->scsi_cmd->result = (CHECK_CONDITION << 1) | + ((test_bit(PC_TIMEDOUT, &pc->flags)?DID_TIME_OUT:DID_OK) << 16); + } else if (test_bit(PC_TIMEDOUT, &pc->flags)) { + if (log) + printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n", + drive->name, pc->scsi_cmd->serial_number); + pc->scsi_cmd->result = DID_TIME_OUT << 16; + } else if (rq->errors >= ERROR_MAX) { + pc->scsi_cmd->result = DID_ERROR << 16; + if (log) + printk ("ide-scsi: %s: I/O error for %lu\n", drive->name, pc->scsi_cmd->serial_number); + } else if (rq->errors) { + if (log) + printk ("ide-scsi: %s: check condition for %lu\n", drive->name, pc->scsi_cmd->serial_number); + if (!idescsi_check_condition(drive, rq)) + /* we started a request sense, so we'll be back, exit for now */ + return 0; + pc->scsi_cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16); + } else { + pc->scsi_cmd->result = DID_OK << 16; + idescsi_transform_pc2 (drive, pc); + if (log) { + printk ("ide-scsi: %s: suc %lu", drive->name, pc->scsi_cmd->serial_number); + if (!test_bit(PC_WRITING, &pc->flags) && pc->actually_transferred && pc->actually_transferred <= 1024 && pc->buffer) { + printk(", rst = "); + scsi_buf = pc->scsi_cmd->request_buffer; + hexdump(scsi_buf, min_t(unsigned, 16, pc->scsi_cmd->request_bufflen)); + } else printk("\n"); + } + } + host = pc->scsi_cmd->device->host; + spin_lock_irqsave(host->host_lock, flags); + pc->done(pc->scsi_cmd); + spin_unlock_irqrestore(host->host_lock, flags); + kfree(pc); + kfree(rq); + scsi->pc = NULL; + return 0; +} + +static inline unsigned long get_timeout(idescsi_pc_t *pc) +{ + return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies); +} + +static int idescsi_expiry(ide_drive_t *drive) +{ + idescsi_scsi_t *scsi = drive->driver_data; + idescsi_pc_t *pc = scsi->pc; + +#if IDESCSI_DEBUG_LOG + printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies); +#endif + set_bit(PC_TIMEDOUT, &pc->flags); + + return 0; /* we do not want the ide subsystem to retry */ +} + +/* + * Our interrupt handler. + */ +static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + idescsi_pc_t *pc=scsi->pc; + struct request *rq = pc->rq; + atapi_bcount_t bcount; + atapi_status_t status; + atapi_ireason_t ireason; + atapi_feature_t feature; + + unsigned int temp; + +#if IDESCSI_DEBUG_LOG + printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n"); +#endif /* IDESCSI_DEBUG_LOG */ + + if (test_bit(PC_TIMEDOUT, &pc->flags)){ +#if IDESCSI_DEBUG_LOG + printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n", + pc->scsi_cmd->serial_number, jiffies); +#endif + /* end this request now - scsi should retry it*/ + idescsi_end_request (drive, 1, 0); + return ide_stopped; + } + if (test_and_clear_bit (PC_DMA_IN_PROGRESS, &pc->flags)) { +#if IDESCSI_DEBUG_LOG + printk ("ide-scsi: %s: DMA complete\n", drive->name); +#endif /* IDESCSI_DEBUG_LOG */ + pc->actually_transferred=pc->request_transfer; + (void) HWIF(drive)->ide_dma_end(drive); + } + + feature.all = 0; + /* Clear the interrupt */ + status.all = HWIF(drive)->INB(IDE_STATUS_REG); + + if (!status.b.drq) { + /* No more interrupts */ + if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) + printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred); + local_irq_enable(); + if (status.b.check) + rq->errors++; + idescsi_end_request (drive, 1, 0); + return ide_stopped; + } + bcount.b.low = HWIF(drive)->INB(IDE_BCOUNTL_REG); + bcount.b.high = HWIF(drive)->INB(IDE_BCOUNTH_REG); + ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); + + if (ireason.b.cod) { + printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); + return ide_do_reset (drive); + } + if (ireason.b.io) { + temp = pc->actually_transferred + bcount.all; + if (temp > pc->request_transfer) { + if (temp > pc->buffer_size) { + printk(KERN_ERR "ide-scsi: The scsi wants to " + "send us more data than expected " + "- discarding data\n"); + temp = pc->buffer_size - pc->actually_transferred; + if (temp) { + clear_bit(PC_WRITING, &pc->flags); + if (pc->sg) + idescsi_input_buffers(drive, pc, temp); + else + drive->hwif->atapi_input_bytes(drive, pc->current_position, temp); + printk(KERN_ERR "ide-scsi: transferred %d of %d bytes\n", temp, bcount.all); + } + pc->actually_transferred += temp; + pc->current_position += temp; + idescsi_discard_data(drive, bcount.all - temp); + ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); + return ide_started; + } +#if IDESCSI_DEBUG_LOG + printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); +#endif /* IDESCSI_DEBUG_LOG */ + } + } + if (ireason.b.io) { + clear_bit(PC_WRITING, &pc->flags); + if (pc->sg) + idescsi_input_buffers(drive, pc, bcount.all); + else + HWIF(drive)->atapi_input_bytes(drive, pc->current_position, bcount.all); + } else { + set_bit(PC_WRITING, &pc->flags); + if (pc->sg) + idescsi_output_buffers (drive, pc, bcount.all); + else + HWIF(drive)->atapi_output_bytes(drive, pc->current_position, bcount.all); + } + /* Update the current position */ + pc->actually_transferred += bcount.all; + pc->current_position += bcount.all; + + /* And set the interrupt handler again */ + ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); + return ide_started; +} + +static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + idescsi_pc_t *pc = scsi->pc; + atapi_ireason_t ireason; + ide_startstop_t startstop; + + if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { + printk(KERN_ERR "ide-scsi: Strange, packet command " + "initiated yet DRQ isn't asserted\n"); + return startstop; + } + ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); + if (!ireason.b.cod || ireason.b.io) { + printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while " + "issuing a packet command\n"); + return ide_do_reset (drive); + } + if (HWGROUP(drive)->handler != NULL) + BUG(); + /* Set the interrupt routine */ + ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); + /* Send the actual packet */ + drive->hwif->atapi_output_bytes(drive, scsi->pc->c, 12); + if (test_bit (PC_DMA_OK, &pc->flags)) { + set_bit (PC_DMA_IN_PROGRESS, &pc->flags); + hwif->dma_start(drive); + } + return ide_started; +} + +static inline int idescsi_set_direction(idescsi_pc_t *pc) +{ + switch (pc->c[0]) { + case READ_6: case READ_10: case READ_12: + clear_bit(PC_WRITING, &pc->flags); + return 0; + case WRITE_6: case WRITE_10: case WRITE_12: + set_bit(PC_WRITING, &pc->flags); + return 0; + default: + return 1; + } +} + +static int idescsi_map_sg(ide_drive_t *drive, idescsi_pc_t *pc) +{ + ide_hwif_t *hwif = drive->hwif; + struct scatterlist *sg, *scsi_sg; + int segments; + + if (!pc->request_transfer || pc->request_transfer % 1024) + return 1; + + if (idescsi_set_direction(pc)) + return 1; + + sg = hwif->sg_table; + scsi_sg = pc->scsi_cmd->request_buffer; + segments = pc->scsi_cmd->use_sg; + + if (segments > hwif->sg_max_nents) + return 1; + + if (!segments) { + hwif->sg_nents = 1; + sg_init_one(sg, pc->scsi_cmd->request_buffer, pc->request_transfer); + } else { + hwif->sg_nents = segments; + memcpy(sg, scsi_sg, sizeof(*sg) * segments); + } + + return 0; +} + +/* + * Issue a packet command + */ +static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + ide_hwif_t *hwif = drive->hwif; + atapi_feature_t feature; + atapi_bcount_t bcount; + + scsi->pc=pc; /* Set the current packet command */ + pc->actually_transferred=0; /* We haven't transferred any data yet */ + pc->current_position=pc->buffer; + bcount.all = min(pc->request_transfer, 63 * 1024); /* Request to transfer the entire buffer at once */ + + feature.all = 0; + if (drive->using_dma && !idescsi_map_sg(drive, pc)) { + hwif->sg_mapped = 1; + feature.b.dma = !hwif->dma_setup(drive); + hwif->sg_mapped = 0; + } + + SELECT_DRIVE(drive); + if (IDE_CONTROL_REG) + HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); + + HWIF(drive)->OUTB(feature.all, IDE_FEATURE_REG); + HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG); + HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG); + + if (feature.b.dma) + set_bit(PC_DMA_OK, &pc->flags); + + if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { + if (HWGROUP(drive)->handler != NULL) + BUG(); + ide_set_handler(drive, &idescsi_transfer_pc, + get_timeout(pc), idescsi_expiry); + /* Issue the packet command */ + HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + return ide_started; + } else { + /* Issue the packet command */ + HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + return idescsi_transfer_pc(drive); + } +} + +/* + * idescsi_do_request is our request handling function. + */ +static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block) +{ +#if IDESCSI_DEBUG_LOG + printk (KERN_INFO "rq_status: %d, dev: %s, cmd: %x, errors: %d\n",rq->rq_status, rq->rq_disk->disk_name,rq->cmd[0],rq->errors); + printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors); +#endif /* IDESCSI_DEBUG_LOG */ + + if (rq->flags & (REQ_SPECIAL|REQ_SENSE)) { + return idescsi_issue_pc (drive, (idescsi_pc_t *) rq->special); + } + blk_dump_rq_flags(rq, "ide-scsi: unsup command"); + idescsi_end_request (drive, 0, 0); + return ide_stopped; +} + +static void idescsi_add_settings(ide_drive_t *drive) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + +/* + * drive setting name read/write ioctl ioctl data type min max mul_factor div_factor data pointer set function + */ + ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); + ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); + ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); + ide_add_setting(drive, "transform", SETTING_RW, -1, -1, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL); + ide_add_setting(drive, "log", SETTING_RW, -1, -1, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL); +} + +/* + * Driver initialization. + */ +static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) +{ + DRIVER(drive)->busy++; + if (drive->id && (drive->id->config & 0x0060) == 0x20) + set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags); + set_bit(IDESCSI_TRANSFORM, &scsi->transform); + clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); +#if IDESCSI_DEBUG_LOG + set_bit(IDESCSI_LOG_CMD, &scsi->log); +#endif /* IDESCSI_DEBUG_LOG */ + idescsi_add_settings(drive); + DRIVER(drive)->busy--; +} + +static int idescsi_cleanup (ide_drive_t *drive) +{ + struct Scsi_Host *scsihost = drive->driver_data; + struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); + struct gendisk *g = scsi->disk; + + if (ide_unregister_subdriver(drive)) + return 1; + + ide_unregister_region(g); + + drive->driver_data = NULL; + g->private_data = NULL; + put_disk(g); + + scsi_remove_host(scsihost); + ide_scsi_put(scsi); + + return 0; +} + +static int idescsi_attach(ide_drive_t *drive); + +#ifdef CONFIG_PROC_FS +static ide_proc_entry_t idescsi_proc[] = { + { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, + { NULL, 0, NULL, NULL } +}; +#else +# define idescsi_proc NULL +#endif + +/* + * IDE subdriver functions, registered with ide.c + */ +static ide_driver_t idescsi_driver = { + .owner = THIS_MODULE, + .name = "ide-scsi", + .version = IDESCSI_VERSION, + .media = ide_scsi, + .busy = 0, + .supports_dsc_overlap = 0, + .proc = idescsi_proc, + .attach = idescsi_attach, + .cleanup = idescsi_cleanup, + .do_request = idescsi_do_request, + .end_request = idescsi_end_request, + .error = idescsi_atapi_error, + .abort = idescsi_atapi_abort, + .drives = LIST_HEAD_INIT(idescsi_driver.drives), +}; + +static int idescsi_ide_open(struct inode *inode, struct file *filp) +{ + struct gendisk *disk = inode->i_bdev->bd_disk; + struct ide_scsi_obj *scsi; + ide_drive_t *drive; + + if (!(scsi = ide_scsi_get(disk))) + return -ENXIO; + + drive = scsi->drive; + + drive->usage++; + + return 0; +} + +static int idescsi_ide_release(struct inode *inode, struct file *filp) +{ + struct gendisk *disk = inode->i_bdev->bd_disk; + struct ide_scsi_obj *scsi = ide_scsi_g(disk); + ide_drive_t *drive = scsi->drive; + + drive->usage--; + + ide_scsi_put(scsi); + + return 0; +} + +static int idescsi_ide_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct block_device *bdev = inode->i_bdev; + struct ide_scsi_obj *scsi = ide_scsi_g(bdev->bd_disk); + return generic_ide_ioctl(scsi->drive, file, bdev, cmd, arg); +} + +static struct block_device_operations idescsi_ops = { + .owner = THIS_MODULE, + .open = idescsi_ide_open, + .release = idescsi_ide_release, + .ioctl = idescsi_ide_ioctl, +}; + +static int idescsi_attach(ide_drive_t *drive); + +static int idescsi_slave_configure(struct scsi_device * sdp) +{ + /* Configure detected device */ + scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, sdp->host->cmd_per_lun); + return 0; +} + +static const char *idescsi_info (struct Scsi_Host *host) +{ + return "SCSI host adapter emulation for IDE ATAPI devices"; +} + +static int idescsi_ioctl (struct scsi_device *dev, int cmd, void __user *arg) +{ + idescsi_scsi_t *scsi = scsihost_to_idescsi(dev->host); + + if (cmd == SG_SET_TRANSFORM) { + if (arg) + set_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); + else + clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); + return 0; + } else if (cmd == SG_GET_TRANSFORM) + return put_user(test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform), (int __user *) arg); + return -EINVAL; +} + +static inline int should_transform(ide_drive_t *drive, struct scsi_cmnd *cmd) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + + /* this was a layering violation and we can't support it + anymore, sorry. */ +#if 0 + struct gendisk *disk = cmd->request->rq_disk; + + if (disk) { + struct Scsi_Device_Template **p = disk->private_data; + if (strcmp((*p)->scsi_driverfs_driver.name, "sg") == 0) + return test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); + } +#endif + return test_bit(IDESCSI_TRANSFORM, &scsi->transform); +} + +static int idescsi_queue (struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct Scsi_Host *host = cmd->device->host; + idescsi_scsi_t *scsi = scsihost_to_idescsi(host); + ide_drive_t *drive = scsi->drive; + struct request *rq = NULL; + idescsi_pc_t *pc = NULL; + + if (!drive) { + printk (KERN_ERR "ide-scsi: drive id %d not present\n", cmd->device->id); + goto abort; + } + scsi = drive_to_idescsi(drive); + pc = kmalloc (sizeof (idescsi_pc_t), GFP_ATOMIC); + rq = kmalloc (sizeof (struct request), GFP_ATOMIC); + if (rq == NULL || pc == NULL) { + printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name); + goto abort; + } + + memset (pc->c, 0, 12); + pc->flags = 0; + pc->rq = rq; + memcpy (pc->c, cmd->cmnd, cmd->cmd_len); + if (cmd->use_sg) { + pc->buffer = NULL; + pc->sg = cmd->request_buffer; + } else { + pc->buffer = cmd->request_buffer; + pc->sg = NULL; + } + pc->b_count = 0; + pc->request_transfer = pc->buffer_size = cmd->request_bufflen; + pc->scsi_cmd = cmd; + pc->done = done; + pc->timeout = jiffies + cmd->timeout_per_command; + + if (should_transform(drive, cmd)) + set_bit(PC_TRANSFORM, &pc->flags); + idescsi_transform_pc1 (drive, pc); + + if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { + printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); + hexdump(cmd->cmnd, cmd->cmd_len); + if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) { + printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number); + hexdump(pc->c, 12); + } + } + + ide_init_drive_cmd (rq); + rq->special = (char *) pc; + rq->flags = REQ_SPECIAL; + spin_unlock_irq(host->host_lock); + rq->rq_disk = scsi->disk; + (void) ide_do_drive_cmd (drive, rq, ide_end); + spin_lock_irq(host->host_lock); + return 0; +abort: + if (pc) kfree (pc); + if (rq) kfree (rq); + cmd->result = DID_ERROR << 16; + done(cmd); + return 0; +} + +static int idescsi_eh_abort (struct scsi_cmnd *cmd) +{ + idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host); + ide_drive_t *drive = scsi->drive; + int busy; + int ret = FAILED; + + /* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */ + + if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) + printk (KERN_WARNING "ide-scsi: abort called for %lu\n", cmd->serial_number); + + if (!drive) { + printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_abort\n"); + WARN_ON(1); + goto no_drive; + } + + /* First give it some more time, how much is "right" is hard to say :-( */ + + busy = ide_wait_not_busy(HWIF(drive), 100); /* FIXME - uses mdelay which causes latency? */ + if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) + printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":""); + + spin_lock_irq(&ide_lock); + + /* If there is no pc running we're done (our interrupt took care of it) */ + if (!scsi->pc) { + ret = SUCCESS; + goto ide_unlock; + } + + /* It's somewhere in flight. Does ide subsystem agree? */ + if (scsi->pc->scsi_cmd->serial_number == cmd->serial_number && !busy && + elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != scsi->pc->rq) { + /* + * FIXME - not sure this condition can ever occur + */ + printk (KERN_ERR "ide-scsi: cmd aborted!\n"); + + if (scsi->pc->rq->flags & REQ_SENSE) + kfree(scsi->pc->buffer); + kfree(scsi->pc->rq); + kfree(scsi->pc); + scsi->pc = NULL; + + ret = SUCCESS; + } + +ide_unlock: + spin_unlock_irq(&ide_lock); +no_drive: + if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) + printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed"); + + return ret; +} + +static int idescsi_eh_reset (struct scsi_cmnd *cmd) +{ + struct request *req; + idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host); + ide_drive_t *drive = scsi->drive; + int ready = 0; + int ret = SUCCESS; + + /* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */ + + if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) + printk (KERN_WARNING "ide-scsi: reset called for %lu\n", cmd->serial_number); + + if (!drive) { + printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_reset\n"); + WARN_ON(1); + return FAILED; + } + + spin_lock_irq(&ide_lock); + + if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) { + printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n"); + spin_unlock(&ide_lock); + return FAILED; + } + + /* kill current request */ + blkdev_dequeue_request(req); + end_that_request_last(req); + if (req->flags & REQ_SENSE) + kfree(scsi->pc->buffer); + kfree(scsi->pc); + scsi->pc = NULL; + kfree(req); + + /* now nuke the drive queue */ + while ((req = elv_next_request(drive->queue))) { + blkdev_dequeue_request(req); + end_that_request_last(req); + } + + HWGROUP(drive)->rq = NULL; + HWGROUP(drive)->handler = NULL; + HWGROUP(drive)->busy = 1; /* will set this to zero when ide reset finished */ + spin_unlock_irq(&ide_lock); + + ide_do_reset(drive); + + /* ide_do_reset starts a polling handler which restarts itself every 50ms until the reset finishes */ + + do { + set_current_state(TASK_UNINTERRUPTIBLE); + spin_unlock_irq(cmd->device->host->host_lock); + schedule_timeout(HZ/20); + spin_lock_irq(cmd->device->host->host_lock); + } while ( HWGROUP(drive)->handler ); + + ready = drive_is_ready(drive); + HWGROUP(drive)->busy--; + if (!ready) { + printk (KERN_ERR "ide-scsi: reset failed!\n"); + ret = FAILED; + } + + return ret; +} + +static int idescsi_bios(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int *parm) +{ + idescsi_scsi_t *idescsi = scsihost_to_idescsi(sdev->host); + ide_drive_t *drive = idescsi->drive; + + if (drive->bios_cyl && drive->bios_head && drive->bios_sect) { + parm[0] = drive->bios_head; + parm[1] = drive->bios_sect; + parm[2] = drive->bios_cyl; + } + return 0; +} + +static struct scsi_host_template idescsi_template = { + .module = THIS_MODULE, + .name = "idescsi", + .info = idescsi_info, + .slave_configure = idescsi_slave_configure, + .ioctl = idescsi_ioctl, + .queuecommand = idescsi_queue, + .eh_abort_handler = idescsi_eh_abort, + .eh_host_reset_handler = idescsi_eh_reset, + .bios_param = idescsi_bios, + .can_queue = 40, + .this_id = -1, + .sg_tablesize = 256, + .cmd_per_lun = 5, + .max_sectors = 128, + .use_clustering = DISABLE_CLUSTERING, + .emulated = 1, + .proc_name = "ide-scsi", +}; + +static int idescsi_attach(ide_drive_t *drive) +{ + idescsi_scsi_t *idescsi; + struct Scsi_Host *host; + struct gendisk *g; + static int warned; + int err = -ENOMEM; + + if (!warned && drive->media == ide_cdrom) { + printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n"); + warned = 1; + } + + if (!strstr("ide-scsi", drive->driver_req) || + !drive->present || + drive->media == ide_disk || + !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) + return 1; + + g = alloc_disk(1 << PARTN_BITS); + if (!g) + goto out_host_put; + + ide_init_disk(g, drive); + + host->max_id = 1; + +#if IDESCSI_DEBUG_LOG + if (drive->id->last_lun) + printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun); +#endif + if ((drive->id->last_lun & 0x7) != 7) + host->max_lun = (drive->id->last_lun & 0x7) + 1; + else + host->max_lun = 1; + + drive->driver_data = host; + idescsi = scsihost_to_idescsi(host); + idescsi->drive = drive; + idescsi->driver = &idescsi_driver; + idescsi->host = host; + idescsi->disk = g; + g->private_data = &idescsi->driver; + err = ide_register_subdriver(drive, &idescsi_driver); + if (!err) { + idescsi_setup (drive, idescsi); + g->fops = &idescsi_ops; + ide_register_region(g); + err = scsi_add_host(host, &drive->gendev); + if (!err) { + scsi_scan_host(host); + return 0; + } + /* fall through on error */ + ide_unregister_region(g); + ide_unregister_subdriver(drive); + } + + put_disk(g); +out_host_put: + scsi_host_put(host); + return err; +} + +static int __init init_idescsi_module(void) +{ + return ide_register_driver(&idescsi_driver); +} + +static void __exit exit_idescsi_module(void) +{ + ide_unregister_driver(&idescsi_driver); +} + +module_init(init_idescsi_module); +module_exit(exit_idescsi_module); +MODULE_LICENSE("GPL"); -- cgit v1.2.3