From 296ccb086dfb89b5b8d73ef08c795ffdff12a597 Mon Sep 17 00:00:00 2001 From: Yuji Shimada Date: Fri, 3 Apr 2009 16:41:46 +0900 Subject: PCI: Setup disabled bridges even if buses are added This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang Signed-off-by: Yuji Shimada Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci/pci-sysfs.c') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index e9a8706a6401..cd8e682c04aa 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -148,7 +148,7 @@ static ssize_t is_enabled_store(struct device *dev, return -EPERM; if (!val) { - if (atomic_read(&pdev->enable_cnt) != 0) + if (pci_is_enabled(pdev)) pci_disable_device(pdev); else result = -EIO; -- cgit v1.2.3