From 62d01535474b612b3c5d864999b17cbf2cd8f2cc Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Sat, 23 Feb 2019 00:37:44 +0100 Subject: net: phy: marvell10g: add support for the 88x2110 PHY This patch adds support for the 88x2110 PHY, which is similar to the already supported 88x3310 PHY without the SFP interface. It supports 10/100/1000BASET along with 2.5GBASET, 5GBASET and 10GBASET, with the same interface modes that are used by the 3310. This PHY don't have the same issue as the 88x3310 regarding 2.5/5G abilities, and correctly follows the 802.3bz standard to list the supported abilities. Signed-off-by: Maxime Chevallier Suggested-by: Antoine Tenart Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/marvell10g.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/net/phy/marvell10g.c') diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 8f354c3f3876..580e91deadbc 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -478,12 +478,25 @@ static struct phy_driver mv3310_drivers[] = { .aneg_done = mv3310_aneg_done, .read_status = mv3310_read_status, }, + { + .phy_id = MARVELL_PHY_ID_88E2110, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "mv88x2110", + .features = PHY_10GBIT_FEATURES, + .probe = mv3310_probe, + .soft_reset = gen10g_no_soft_reset, + .config_init = mv3310_config_init, + .config_aneg = mv3310_config_aneg, + .aneg_done = mv3310_aneg_done, + .read_status = mv3310_read_status, + }, }; module_phy_driver(mv3310_drivers); static struct mdio_device_id __maybe_unused mv3310_tbl[] = { { MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK }, { }, }; MODULE_DEVICE_TABLE(mdio, mv3310_tbl); -- cgit v1.2.3