From 66b73ef38d80a135b090f96948ca51ed1a3238d9 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Wed, 13 Jul 2022 12:14:05 +0300 Subject: i2c: mlxcpld: Fix register setting for 400KHz frequency [ Upstream commit e1f77ecc75aaee6bed04e8fd7830e00032af012e ] Fix setting of 'Half Cycle' register for 400KHz frequency. Fixes: fa1049135c15 ("i2c: mlxcpld: Modify register setting for 400KHz frequency") Signed-off-by: Vadim Pasternak Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-mlxcpld.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c index 015e11c4663f..077d716c73ca 100644 --- a/drivers/i2c/busses/i2c-mlxcpld.c +++ b/drivers/i2c/busses/i2c-mlxcpld.c @@ -49,7 +49,7 @@ #define MLXCPLD_LPCI2C_NACK_IND 2 #define MLXCPLD_I2C_FREQ_1000KHZ_SET 0x04 -#define MLXCPLD_I2C_FREQ_400KHZ_SET 0x0c +#define MLXCPLD_I2C_FREQ_400KHZ_SET 0x0e #define MLXCPLD_I2C_FREQ_100KHZ_SET 0x42 enum mlxcpld_i2c_frequency { -- cgit v1.2.3 From 196c21deb08a43e7d03910f69232352554dba095 Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Tue, 14 Jun 2022 17:29:19 -0600 Subject: i2c: cadence: Change large transfer count reset logic to be unconditional [ Upstream commit 4ca8ca873d454635c20d508261bfc0081af75cf8 ] Problems were observed on the Xilinx ZynqMP platform with large I2C reads. When a read of 277 bytes was performed, the controller NAKed the transfer after only 252 bytes were transferred and returned an ENXIO error on the transfer. There is some code in cdns_i2c_master_isr to handle this case by resetting the transfer count in the controller before it reaches 0, to allow larger transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT quirk being set on the controller, and ZynqMP uses the r1p14 version of the core where this quirk is not being set. The requirement to do this to support larger reads seems like an inherently required workaround due to the core only having an 8-bit transfer size register, so it does not appear that this should be conditional on the broken HOLD bit quirk which is used elsewhere in the driver. Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer size reset logic to fix this problem. Fixes: 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC") Signed-off-by: Robert Hancock Reviewed-by: Shubhrajyoti Datta Acked-by: Michal Simek Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-cadence.c | 30 +++++------------------------- 1 file changed, 5 insertions(+), 25 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 3d6f8ee355bf..630cfa4ddd46 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -388,9 +388,9 @@ static irqreturn_t cdns_i2c_slave_isr(void *ptr) */ static irqreturn_t cdns_i2c_master_isr(void *ptr) { - unsigned int isr_status, avail_bytes, updatetx; + unsigned int isr_status, avail_bytes; unsigned int bytes_to_send; - bool hold_quirk; + bool updatetx; struct cdns_i2c *id = ptr; /* Signal completion only after everything is updated */ int done_flag = 0; @@ -410,11 +410,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr) * Check if transfer size register needs to be updated again for a * large data receive operation. */ - updatetx = 0; - if (id->recv_count > id->curr_recv_count) - updatetx = 1; - - hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx; + updatetx = id->recv_count > id->curr_recv_count; /* When receiving, handle data interrupt and completion interrupt */ if (id->p_recv_buf && @@ -445,7 +441,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr) break; } - if (cdns_is_holdquirk(id, hold_quirk)) + if (cdns_is_holdquirk(id, updatetx)) break; } @@ -456,7 +452,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr) * maintain transfer size non-zero while performing a large * receive operation. */ - if (cdns_is_holdquirk(id, hold_quirk)) { + if (cdns_is_holdquirk(id, updatetx)) { /* wait while fifo is full */ while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) != (id->curr_recv_count - CDNS_I2C_FIFO_DEPTH)) @@ -478,22 +474,6 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr) CDNS_I2C_XFER_SIZE_OFFSET); id->curr_recv_count = id->recv_count; } - } else if (id->recv_count && !hold_quirk && - !id->curr_recv_count) { - - /* Set the slave address in address register*/ - cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK, - CDNS_I2C_ADDR_OFFSET); - - if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) { - cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE, - CDNS_I2C_XFER_SIZE_OFFSET); - id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE; - } else { - cdns_i2c_writereg(id->recv_count, - CDNS_I2C_XFER_SIZE_OFFSET); - id->curr_recv_count = id->recv_count; - } } /* Clear hold (if not repeated start) and signal completion */ -- cgit v1.2.3