From 320c04c068c62b71fe9ea55e06e4968b4edc9e48 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 25 Dec 2008 13:38:40 +0100 Subject: [S390] Move stfle to header file. stfle will be needed by the ap_bus module to figure out wether the AP queue adapter interruption facility is installed. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'arch/s390/kernel/setup.c') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 400b040df7fa..a0d44bc0c389 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -651,23 +651,6 @@ setup_memory(void) #endif } -static int __init __stfle(unsigned long long *list, int doublewords) -{ - typedef struct { unsigned long long _[doublewords]; } addrtype; - register unsigned long __nr asm("0") = doublewords - 1; - - asm volatile(".insn s,0xb2b00000,%0" /* stfle */ - : "=m" (*(addrtype *) list), "+d" (__nr) : : "cc"); - return __nr + 1; -} - -int __init stfle(unsigned long long *list, int doublewords) -{ - if (!(stfl() & (1UL << 24))) - return -EOPNOTSUPP; - return __stfle(list, doublewords); -} - /* * Setup hardware capabilities. */ -- cgit v1.2.3 From 9fee8db222a344b9ee407fad9c652ed823690788 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 25 Dec 2008 13:39:22 +0100 Subject: [S390] add new machine types to setup_hwcaps. Add the machine types for z9-bc, z10-ec and z10-bc to the elf_platform detection in setup_hwcaps. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/s390/kernel/setup.c') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index a0d44bc0c389..323dedecdf54 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -722,8 +722,13 @@ static void __init setup_hwcaps(void) strcpy(elf_platform, "z990"); break; case 0x2094: + case 0x2096: strcpy(elf_platform, "z9-109"); break; + case 0x2097: + case 0x2098: + strcpy(elf_platform, "z10"); + break; } } -- cgit v1.2.3 From 0946100f566d04cc93e86654f3ba588ee94b3f4c Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Thu, 25 Dec 2008 13:39:29 +0100 Subject: [S390] s390/setup: set default preferred console device "ttyS" This patch sets the default console device for s390. The console= kernel parameter can be still used to switch the preferred console to some other device. In that case, console messages are also printed on the default console device (ttyS0). Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/s390/kernel/setup.c') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 323dedecdf54..bed9dcb34fda 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -740,6 +740,9 @@ static void __init setup_hwcaps(void) void __init setup_arch(char **cmdline_p) { + /* set up preferred console */ + add_preferred_console("ttyS", 0, NULL); + /* * print what head.S has found out about the machine */ -- cgit v1.2.3 From 3b6ed4ab48be2110aa93d9828783bfe86193331d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 25 Dec 2008 13:39:40 +0100 Subject: [S390] convert setup printks to pr_xxx macros. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 72 +++++++++++++++++++++++++++++++----------------- 1 file changed, 46 insertions(+), 26 deletions(-) (limited to 'arch/s390/kernel/setup.c') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index bed9dcb34fda..ba724d180be7 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -14,6 +14,9 @@ * This file handles the architecture-dependent parts of initialization */ +#define KMSG_COMPONENT "setup" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include #include #include @@ -291,8 +294,8 @@ unsigned int switch_amode = 0; #endif EXPORT_SYMBOL_GPL(switch_amode); -static void set_amode_and_uaccess(unsigned long user_amode, - unsigned long user32_amode) +static int set_amode_and_uaccess(unsigned long user_amode, + unsigned long user32_amode) { psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | @@ -309,11 +312,11 @@ static void set_amode_and_uaccess(unsigned long user_amode, PSW_MASK_MCHECK | PSW_DEFAULT_KEY; if (MACHINE_HAS_MVCOS) { - printk("mvcos available.\n"); memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess)); + return 1; } else { - printk("mvcos not available.\n"); memcpy(&uaccess, &uaccess_pt, sizeof(uaccess)); + return 0; } } @@ -328,9 +331,10 @@ static int __init early_parse_switch_amode(char *p) early_param("switch_amode", early_parse_switch_amode); #else /* CONFIG_S390_SWITCH_AMODE */ -static inline void set_amode_and_uaccess(unsigned long user_amode, - unsigned long user32_amode) +static inline int set_amode_and_uaccess(unsigned long user_amode, + unsigned long user32_amode) { + return 0; } #endif /* CONFIG_S390_SWITCH_AMODE */ @@ -355,11 +359,20 @@ early_param("noexec", early_parse_noexec); static void setup_addressing_mode(void) { if (s390_noexec) { - printk("S390 execute protection active, "); - set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY); + if (set_amode_and_uaccess(PSW_ASC_SECONDARY, + PSW32_ASC_SECONDARY)) + pr_info("Execute protection active, " + "mvcos available\n"); + else + pr_info("Execute protection active, " + "mvcos not available\n"); } else if (switch_amode) { - printk("S390 address spaces switched, "); - set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY); + if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY)) + pr_info("Address spaces switched, " + "mvcos available\n"); + else + pr_info("Address spaces switched, " + "mvcos not available\n"); } #ifdef CONFIG_TRACE_IRQFLAGS sysc_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK; @@ -572,15 +585,15 @@ setup_memory(void) start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE; if (start + INITRD_SIZE > memory_end) { - printk("initrd extends beyond end of memory " - "(0x%08lx > 0x%08lx)\n" + pr_err("initrd extends beyond end of " + "memory (0x%08lx > 0x%08lx) " "disabling initrd\n", start + INITRD_SIZE, memory_end); INITRD_START = INITRD_SIZE = 0; } else { - printk("Moving initrd (0x%08lx -> 0x%08lx, " - "size: %ld)\n", - INITRD_START, start, INITRD_SIZE); + pr_info("Moving initrd (0x%08lx -> " + "0x%08lx, size: %ld)\n", + INITRD_START, start, INITRD_SIZE); memmove((void *) start, (void *) INITRD_START, INITRD_SIZE); INITRD_START = start; @@ -642,8 +655,9 @@ setup_memory(void) initrd_start = INITRD_START; initrd_end = initrd_start + INITRD_SIZE; } else { - printk("initrd extends beyond end of memory " - "(0x%08lx > 0x%08lx)\ndisabling initrd\n", + pr_err("initrd extends beyond end of " + "memory (0x%08lx > 0x%08lx) " + "disabling initrd\n", initrd_start + INITRD_SIZE, memory_end); initrd_start = initrd_end = 0; } @@ -747,21 +761,27 @@ setup_arch(char **cmdline_p) * print what head.S has found out about the machine */ #ifndef CONFIG_64BIT - printk((MACHINE_IS_VM) ? - "We are running under VM (31 bit mode)\n" : - "We are running native (31 bit mode)\n"); - printk((MACHINE_HAS_IEEE) ? - "This machine has an IEEE fpu\n" : - "This machine has no IEEE fpu\n"); + if (MACHINE_IS_VM) + pr_info("Linux is running as a z/VM " + "guest operating system in 31-bit mode\n"); + else + pr_info("Linux is running natively in 31-bit mode\n"); + if (MACHINE_HAS_IEEE) + pr_info("The hardware system has IEEE compatible " + "floating point units\n"); + else + pr_info("The hardware system has no IEEE compatible " + "floating point units\n"); #else /* CONFIG_64BIT */ if (MACHINE_IS_VM) - printk("We are running under VM (64 bit mode)\n"); + pr_info("Linux is running as a z/VM " + "guest operating system in 64-bit mode\n"); else if (MACHINE_IS_KVM) { - printk("We are running under KVM (64 bit mode)\n"); + pr_info("Linux is running under KVM in 64-bit mode\n"); add_preferred_console("hvc", 0, NULL); s390_virtio_console_init(); } else - printk("We are running native (64 bit mode)\n"); + pr_info("Linux is running natively in 64-bit mode\n"); #endif /* CONFIG_64BIT */ /* Have one command line that is parsed and saved in /proc/cmdline */ -- cgit v1.2.3 From 395d31d40cc38270dd7c024691404e2eddf0678d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 25 Dec 2008 13:39:50 +0100 Subject: [S390] convert cpu related printks to pr_xxx macros. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 88 ------------------------------------------------ 1 file changed, 88 deletions(-) (limited to 'arch/s390/kernel/setup.c') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index ba724d180be7..b7a1efd5522c 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -829,90 +828,3 @@ setup_arch(char **cmdline_p) /* Setup zfcpdump support */ setup_zfcpdump(console_devno); } - -void __cpuinit print_cpu_info(struct cpuinfo_S390 *cpuinfo) -{ - printk(KERN_INFO "cpu %d " -#ifdef CONFIG_SMP - "phys_idx=%d " -#endif - "vers=%02X ident=%06X machine=%04X unused=%04X\n", - cpuinfo->cpu_nr, -#ifdef CONFIG_SMP - cpuinfo->cpu_addr, -#endif - cpuinfo->cpu_id.version, - cpuinfo->cpu_id.ident, - cpuinfo->cpu_id.machine, - cpuinfo->cpu_id.unused); -} - -/* - * show_cpuinfo - Get information on one CPU for use by procfs. - */ - -static int show_cpuinfo(struct seq_file *m, void *v) -{ - static const char *hwcap_str[8] = { - "esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp", - "edat" - }; - struct cpuinfo_S390 *cpuinfo; - unsigned long n = (unsigned long) v - 1; - int i; - - s390_adjust_jiffies(); - preempt_disable(); - if (!n) { - seq_printf(m, "vendor_id : IBM/S390\n" - "# processors : %i\n" - "bogomips per cpu: %lu.%02lu\n", - num_online_cpus(), loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ))%100); - seq_puts(m, "features\t: "); - for (i = 0; i < 8; i++) - if (hwcap_str[i] && (elf_hwcap & (1UL << i))) - seq_printf(m, "%s ", hwcap_str[i]); - seq_puts(m, "\n"); - } - - if (cpu_online(n)) { -#ifdef CONFIG_SMP - if (smp_processor_id() == n) - cpuinfo = &S390_lowcore.cpu_data; - else - cpuinfo = &lowcore_ptr[n]->cpu_data; -#else - cpuinfo = &S390_lowcore.cpu_data; -#endif - seq_printf(m, "processor %li: " - "version = %02X, " - "identification = %06X, " - "machine = %04X\n", - n, cpuinfo->cpu_id.version, - cpuinfo->cpu_id.ident, - cpuinfo->cpu_id.machine); - } - preempt_enable(); - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL; -} -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} -static void c_stop(struct seq_file *m, void *v) -{ -} -const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; - -- cgit v1.2.3