From ba9d1e2a3da505f0574751c3041bbc307c30aeca Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 3 Sep 2005 15:55:23 -0700 Subject: [PATCH] ppc32: Remove board support for K2 Support for the K2 board is no longer maintained and thus being removed Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/Makefile | 1 - arch/ppc/platforms/k2.c | 613 -------------------------------------------- arch/ppc/platforms/k2.h | 82 ------ 3 files changed, 696 deletions(-) delete mode 100644 arch/ppc/platforms/k2.c delete mode 100644 arch/ppc/platforms/k2.h (limited to 'arch/ppc/platforms') diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index fcd03e52f602..fb52acf5daad 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_CPCI690) += cpci690.o obj-$(CONFIG_EV64260) += ev64260.o obj-$(CONFIG_CHESTNUT) += chestnut.o obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o -obj-$(CONFIG_K2) += k2.o obj-$(CONFIG_LOPEC) += lopec.o obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_HDPU) += hdpu.o diff --git a/arch/ppc/platforms/k2.c b/arch/ppc/platforms/k2.c deleted file mode 100644 index aacb438708ff..000000000000 --- a/arch/ppc/platforms/k2.c +++ /dev/null @@ -1,613 +0,0 @@ -/* - * arch/ppc/platforms/k2.c - * - * Board setup routines for SBS K2 - * - * Author: Matt Porter - * - * Updated by: Randy Vinson -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "k2.h" - -extern unsigned long loops_per_jiffy; -extern void gen550_progress(char *, unsigned short); - -static unsigned int cpu_7xx[16] = { - 0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; -static unsigned int cpu_6xx[16] = { - 0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0 -}; - -static inline int __init -k2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - /* - * Check our hose index. If we are zero then we are on the - * local PCI hose, otherwise we are on the cPCI hose. - */ - if (!hose->index) { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {1, 0, 0, 0}, /* Ethernet */ - {5, 5, 5, 5}, /* PMC Site 1 */ - {6, 6, 6, 6}, /* PMC Site 2 */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* PCI-ISA Bridge */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {15, 0, 0, 0}, /* M5229 IDE */ - }; - const long min_idsel = 3, max_idsel = 17, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } else { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {10, 11, 12, 9}, /* cPCI slot 8 */ - {11, 12, 9, 10}, /* cPCI slot 7 */ - {12, 9, 10, 11}, /* cPCI slot 6 */ - {9, 10, 11, 12}, /* cPCI slot 5 */ - {10, 11, 12, 9}, /* cPCI slot 4 */ - {11, 12, 9, 10}, /* cPCI slot 3 */ - {12, 9, 10, 11}, /* cPCI slot 2 */ - }; - const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } -} - -void k2_pcibios_fixup(void) -{ -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) - struct pci_dev *ide_dev; - - /* - * Enable DMA support on hdc - */ - ide_dev = pci_get_device(PCI_VENDOR_ID_AL, - PCI_DEVICE_ID_AL_M5229, NULL); - - if (ide_dev) { - - unsigned long ide_dma_base; - - ide_dma_base = pci_resource_start(ide_dev, 4); - outb(0x00, ide_dma_base + 0x2); - outb(0x20, ide_dma_base + 0xa); - pci_dev_put(ide_dev); - } -#endif -} - -void k2_pcibios_fixup_resources(struct pci_dev *dev) -{ - int i; - - if ((dev->vendor == PCI_VENDOR_ID_IBM) && - (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) { - pr_debug("Fixup CPC710 resources\n"); - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - } - } -} - -void k2_setup_hoses(void) -{ - struct pci_controller *hose_a, *hose_b; - - /* - * Reconfigure CPC710 memory map so - * we have some more PCI memory space. - */ - - /* Set FPHB mode */ - __raw_writel(0x808000e0, PGCHP); /* Set FPHB mode */ - - /* PCI32 mappings */ - __raw_writel(0x00000000, K2_PCI32_BAR + PIBAR); /* PCI I/O base */ - __raw_writel(0x00000000, K2_PCI32_BAR + PMBAR); /* PCI Mem base */ - __raw_writel(0xf0000000, K2_PCI32_BAR + MSIZE); /* 256MB */ - __raw_writel(0xfff00000, K2_PCI32_BAR + IOSIZE); /* 1MB */ - __raw_writel(0xc0000000, K2_PCI32_BAR + SMBAR); /* Base@0xc0000000 */ - __raw_writel(0x80000000, K2_PCI32_BAR + SIBAR); /* Base@0x80000000 */ - __raw_writel(0x000000c0, K2_PCI32_BAR + PSSIZE); /* 1GB space */ - __raw_writel(0x000000c0, K2_PCI32_BAR + PPSIZE); /* 1GB space */ - __raw_writel(0x00000000, K2_PCI32_BAR + BARPS); /* Base@0x00000000 */ - __raw_writel(0x00000000, K2_PCI32_BAR + BARPP); /* Base@0x00000000 */ - __raw_writel(0x00000080, K2_PCI32_BAR + PSBAR); /* Base@0x80 */ - __raw_writel(0x00000000, K2_PCI32_BAR + PPBAR); - - __raw_writel(0xc0000000, K2_PCI32_BAR + BPMDLK); - __raw_writel(0xd0000000, K2_PCI32_BAR + TPMDLK); - __raw_writel(0x80000000, K2_PCI32_BAR + BIODLK); - __raw_writel(0x80100000, K2_PCI32_BAR + TIODLK); - __raw_writel(0xe0008000, K2_PCI32_BAR + DLKCTRL); - __raw_writel(0xffffffff, K2_PCI32_BAR + DLKDEV); - - /* PCI64 mappings */ - __raw_writel(0x00100000, K2_PCI64_BAR + PIBAR); /* PCI I/O base */ - __raw_writel(0x10000000, K2_PCI64_BAR + PMBAR); /* PCI Mem base */ - __raw_writel(0xf0000000, K2_PCI64_BAR + MSIZE); /* 256MB */ - __raw_writel(0xfff00000, K2_PCI64_BAR + IOSIZE); /* 1MB */ - __raw_writel(0xd0000000, K2_PCI64_BAR + SMBAR); /* Base@0xd0000000 */ - __raw_writel(0x80100000, K2_PCI64_BAR + SIBAR); /* Base@0x80100000 */ - __raw_writel(0x000000c0, K2_PCI64_BAR + PSSIZE); /* 1GB space */ - __raw_writel(0x000000c0, K2_PCI64_BAR + PPSIZE); /* 1GB space */ - __raw_writel(0x00000000, K2_PCI64_BAR + BARPS); /* Base@0x00000000 */ - __raw_writel(0x00000000, K2_PCI64_BAR + BARPP); /* Base@0x00000000 */ - - /* Setup PCI32 hose */ - hose_a = pcibios_alloc_controller(); - if (!hose_a) - return; - - hose_a->first_busno = 0; - hose_a->last_busno = 0xff; - hose_a->pci_mem_offset = K2_PCI32_MEM_BASE; - - pci_init_resource(&hose_a->io_resource, - K2_PCI32_LOWER_IO, - K2_PCI32_UPPER_IO, - IORESOURCE_IO, "PCI32 host bridge"); - - pci_init_resource(&hose_a->mem_resources[0], - K2_PCI32_LOWER_MEM + K2_PCI32_MEM_BASE, - K2_PCI32_UPPER_MEM + K2_PCI32_MEM_BASE, - IORESOURCE_MEM, "PCI32 host bridge"); - - hose_a->io_space.start = K2_PCI32_LOWER_IO; - hose_a->io_space.end = K2_PCI32_UPPER_IO; - hose_a->mem_space.start = K2_PCI32_LOWER_MEM; - hose_a->mem_space.end = K2_PCI32_UPPER_MEM; - hose_a->io_base_virt = (void *)K2_ISA_IO_BASE; - - setup_indirect_pci(hose_a, K2_PCI32_CONFIG_ADDR, K2_PCI32_CONFIG_DATA); - - /* Initialize PCI32 bus registers */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, hose_a->first_busno); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, hose_a->last_busno); - - /* Enable PCI interrupt polling */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x45, 0x80); - - /* Route polled PCI interrupts */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x48, 0x58); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x49, 0x07); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x4a, 0x31); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x4b, 0xb9); - - /* route secondary IDE channel interrupt to IRQ 15 */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x75, 0x0f); - - /* enable IDE controller IDSEL */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x58, 0x48); - - /* Enable IDE function */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(17, 0), 0x50, 0x03); - - /* Set M5229 IDE controller to native mode */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(17, 0), PCI_CLASS_PROG, 0xdf); - - hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); - - /* Write out correct max subordinate bus number for hose A */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, hose_a->last_busno); - - /* Only setup PCI64 hose if we are in the system slot */ - if (!(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK)) { - /* Setup PCI64 hose */ - hose_b = pcibios_alloc_controller(); - if (!hose_b) - return; - - hose_b->first_busno = hose_a->last_busno + 1; - hose_b->last_busno = 0xff; - - /* Reminder: quit changing the following, it is correct. */ - hose_b->pci_mem_offset = K2_PCI32_MEM_BASE; - - pci_init_resource(&hose_b->io_resource, - K2_PCI64_LOWER_IO, - K2_PCI64_UPPER_IO, - IORESOURCE_IO, "PCI64 host bridge"); - - pci_init_resource(&hose_b->mem_resources[0], - K2_PCI64_LOWER_MEM + K2_PCI32_MEM_BASE, - K2_PCI64_UPPER_MEM + K2_PCI32_MEM_BASE, - IORESOURCE_MEM, "PCI64 host bridge"); - - hose_b->io_space.start = K2_PCI64_LOWER_IO; - hose_b->io_space.end = K2_PCI64_UPPER_IO; - hose_b->mem_space.start = K2_PCI64_LOWER_MEM; - hose_b->mem_space.end = K2_PCI64_UPPER_MEM; - hose_b->io_base_virt = (void *)K2_ISA_IO_BASE; - - setup_indirect_pci(hose_b, - K2_PCI64_CONFIG_ADDR, K2_PCI64_CONFIG_DATA); - - /* Initialize PCI64 bus registers */ - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, 0xff); - - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, hose_b->first_busno); - - hose_b->last_busno = pciauto_bus_scan(hose_b, - hose_b->first_busno); - - /* Write out correct max subordinate bus number for hose B */ - early_write_config_byte(hose_b, - hose_b->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_b->last_busno); - - /* Configure PCI64 PSBAR */ - early_write_config_dword(hose_b, - hose_b->first_busno, - PCI_DEVFN(0, 0), - PCI_BASE_ADDRESS_0, - K2_PCI64_SYS_MEM_BASE); - } - - /* Configure i8259 level/edge settings */ - outb(0x62, 0x4d0); - outb(0xde, 0x4d1); - -#ifdef CONFIG_CPC710_DATA_GATHERING - { - unsigned int tmp; - tmp = __raw_readl(ABCNTL); - /* Enable data gathering on both PCI interfaces */ - __raw_writel(tmp | 0x05000000, ABCNTL); - } -#endif - - ppc_md.pcibios_fixup = k2_pcibios_fixup; - ppc_md.pcibios_fixup_resources = k2_pcibios_fixup_resources; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = k2_map_irq; -} - -static int k2_get_bus_speed(void) -{ - int bus_speed; - unsigned char board_id; - - board_id = *(unsigned char *)K2_BOARD_ID_REG; - - switch (K2_BUS_SPD(board_id)) { - - case 0: - default: - bus_speed = 100000000; - break; - - case 1: - bus_speed = 83333333; - break; - - case 2: - bus_speed = 75000000; - break; - - case 3: - bus_speed = 66666666; - break; - } - return bus_speed; -} - -static int k2_get_cpu_speed(void) -{ - unsigned long hid1; - int cpu_speed; - - hid1 = mfspr(SPRN_HID1) >> 28; - - if ((mfspr(SPRN_PVR) >> 16) == 8) - hid1 = cpu_7xx[hid1]; - else - hid1 = cpu_6xx[hid1]; - - cpu_speed = k2_get_bus_speed() * hid1 / 2; - return cpu_speed; -} - -static void __init k2_calibrate_decr(void) -{ - int freq, divisor = 4; - - /* determine processor bus speed */ - freq = k2_get_bus_speed(); - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000); -} - -static int k2_show_cpuinfo(struct seq_file *m) -{ - unsigned char k2_geo_bits, k2_system_slot; - - seq_printf(m, "vendor\t\t: SBS\n"); - seq_printf(m, "machine\t\t: K2\n"); - seq_printf(m, "cpu speed\t: %dMhz\n", k2_get_cpu_speed() / 1000000); - seq_printf(m, "bus speed\t: %dMhz\n", k2_get_bus_speed() / 1000000); - seq_printf(m, "memory type\t: SDRAM\n"); - - k2_geo_bits = readb(K2_MSIZ_GEO_REG) & K2_GEO_ADR_MASK; - k2_system_slot = !(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK); - seq_printf(m, "backplane\t: %s slot board", - k2_system_slot ? "System" : "Non system"); - seq_printf(m, "with geographical address %x\n", k2_geo_bits); - - return 0; -} - -TODC_ALLOC(); - -static void __init k2_setup_arch(void) -{ - unsigned int cpu; - - /* Setup TODC access */ - TODC_INIT(TODC_TYPE_MK48T37, 0, 0, - ioremap(K2_RTC_BASE_ADDRESS, K2_RTC_SIZE), 8); - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000 / HZ; - - /* make FLASH transactions higher priority than PCI to avoid deadlock */ - __raw_writel(__raw_readl(SIOC1) | 0x80000000, SIOC1); - - /* Set hardware to access FLASH page 2 */ - __raw_writel(1 << 29, GPOUT); - - /* Setup PCI host bridges */ - k2_setup_hoses(); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDC1; -#endif - - /* Identify the system */ - printk(KERN_INFO "System Identification: SBS K2 - PowerPC 750 @ " - "%d Mhz\n", k2_get_cpu_speed() / 1000000); - printk(KERN_INFO "Port by MontaVista Software, Inc. " - "(source@mvista.com)\n"); - - /* Identify the CPU manufacturer */ - cpu = PVR_REV(mfspr(SPRN_PVR)); - printk(KERN_INFO "CPU manufacturer: %s [rev=%04x]\n", - (cpu & (1 << 15)) ? "IBM" : "Motorola", cpu); -} - -static void k2_restart(char *cmd) -{ - local_irq_disable(); - - /* Flip FLASH back to page 1 to access firmware image */ - __raw_writel(0, GPOUT); - - /* SRR0 has system reset vector, SRR1 has default MSR value */ - /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ - mtspr(SPRN_SRR0, 0xfff00100); - mtspr(SPRN_SRR1, 0); - __asm__ __volatile__("rfi\n\t"); - - /* not reached */ - for (;;) ; -} - -static void k2_power_off(void) -{ - for (;;) ; -} - -static void k2_halt(void) -{ - k2_restart(NULL); -} - -/* - * Set BAT 3 to map PCI32 I/O space. - */ -static __inline__ void k2_set_bat(void) -{ - /* wait for all outstanding memory accesses to complete */ - mb(); - - /* setup DBATs */ - mtspr(SPRN_DBAT2U, 0x80001ffe); - mtspr(SPRN_DBAT2L, 0x8000002a); - mtspr(SPRN_DBAT3U, 0xf0001ffe); - mtspr(SPRN_DBAT3L, 0xf000002a); - - /* wait for updates */ - mb(); -} - -static unsigned long __init k2_find_end_of_memory(void) -{ - unsigned long total; - unsigned char msize = 7; /* Default to 128MB */ - - msize = K2_MEM_SIZE(readb(K2_MSIZ_GEO_REG)); - - switch (msize) { - case 2: - /* - * This will break without a lowered - * KERNELBASE or CONFIG_HIGHMEM on. - * It seems non 1GB builds exist yet, - * though. - */ - total = K2_MEM_SIZE_1GB; - break; - case 3: - case 4: - total = K2_MEM_SIZE_512MB; - break; - case 5: - case 6: - total = K2_MEM_SIZE_256MB; - break; - case 7: - total = K2_MEM_SIZE_128MB; - break; - default: - printk - ("K2: Invalid memory size detected, defaulting to 128MB\n"); - total = K2_MEM_SIZE_128MB; - break; - } - return total; -} - -static void __init k2_map_io(void) -{ - io_block_mapping(K2_PCI32_IO_BASE, - K2_PCI32_IO_BASE, 0x00200000, _PAGE_IO); - io_block_mapping(0xff000000, 0xff000000, 0x01000000, _PAGE_IO); -} - -static void __init k2_init_irq(void) -{ - int i; - - for (i = 0; i < 16; i++) - irq_desc[i].handler = &i8259_pic; - - i8259_init(0); -} - -void __init platform_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7) -{ - parse_bootinfo((struct bi_record *)(r3 + KERNELBASE)); - - k2_set_bat(); - - isa_io_base = K2_ISA_IO_BASE; - isa_mem_base = K2_ISA_MEM_BASE; - pci_dram_offset = K2_PCI32_SYS_MEM_BASE; - - ppc_md.setup_arch = k2_setup_arch; - ppc_md.show_cpuinfo = k2_show_cpuinfo; - ppc_md.init_IRQ = k2_init_irq; - ppc_md.get_irq = i8259_irq; - - ppc_md.find_end_of_memory = k2_find_end_of_memory; - ppc_md.setup_io_mappings = k2_map_io; - - ppc_md.restart = k2_restart; - ppc_md.power_off = k2_power_off; - ppc_md.halt = k2_halt; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.calibrate_decr = k2_calibrate_decr; - - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif -} diff --git a/arch/ppc/platforms/k2.h b/arch/ppc/platforms/k2.h deleted file mode 100644 index 78326aba1988..000000000000 --- a/arch/ppc/platforms/k2.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * arch/ppc/platforms/k2.h - * - * Definitions for SBS K2 board support - * - * Author: Matt Porter - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_K2_H -#define __PPC_PLATFORMS_K2_H - -/* - * SBS K2 definitions - */ - -#define K2_PCI64_BAR 0xff400000 -#define K2_PCI32_BAR 0xff500000 - -#define K2_PCI64_CONFIG_ADDR (K2_PCI64_BAR + 0x000f8000) -#define K2_PCI64_CONFIG_DATA (K2_PCI64_BAR + 0x000f8010) - -#define K2_PCI32_CONFIG_ADDR (K2_PCI32_BAR + 0x000f8000) -#define K2_PCI32_CONFIG_DATA (K2_PCI32_BAR + 0x000f8010) - -#define K2_PCI64_MEM_BASE 0xd0000000 -#define K2_PCI64_IO_BASE 0x80100000 - -#define K2_PCI32_MEM_BASE 0xc0000000 -#define K2_PCI32_IO_BASE 0x80000000 - -#define K2_PCI32_SYS_MEM_BASE 0x80000000 -#define K2_PCI64_SYS_MEM_BASE K2_PCI32_SYS_MEM_BASE - -#define K2_PCI32_LOWER_MEM 0x00000000 -#define K2_PCI32_UPPER_MEM 0x0fffffff -#define K2_PCI32_LOWER_IO 0x00000000 -#define K2_PCI32_UPPER_IO 0x000fffff - -#define K2_PCI64_LOWER_MEM 0x10000000 -#define K2_PCI64_UPPER_MEM 0x1fffffff -#define K2_PCI64_LOWER_IO 0x00100000 -#define K2_PCI64_UPPER_IO 0x001fffff - -#define K2_ISA_IO_BASE K2_PCI32_IO_BASE -#define K2_ISA_MEM_BASE K2_PCI32_MEM_BASE - -#define K2_BOARD_ID_REG (K2_ISA_IO_BASE + 0x800) -#define K2_MISC_REG (K2_ISA_IO_BASE + 0x804) -#define K2_MSIZ_GEO_REG (K2_ISA_IO_BASE + 0x808) -#define K2_HOT_SWAP_REG (K2_ISA_IO_BASE + 0x80c) -#define K2_PLD2_REG (K2_ISA_IO_BASE + 0x80e) -#define K2_PLD3_REG (K2_ISA_IO_BASE + 0x80f) - -#define K2_BUS_SPD(board_id) (board_id >> 2) & 3 - -#define K2_RTC_BASE_OFFSET 0x90000 -#define K2_RTC_BASE_ADDRESS (K2_PCI32_MEM_BASE + K2_RTC_BASE_OFFSET) -#define K2_RTC_SIZE 0x8000 - -#define K2_MEM_SIZE_MASK 0xe0 -#define K2_MEM_SIZE(size_reg) (size_reg & K2_MEM_SIZE_MASK) >> 5 -#define K2_MEM_SIZE_1GB 0x40000000 -#define K2_MEM_SIZE_512MB 0x20000000 -#define K2_MEM_SIZE_256MB 0x10000000 -#define K2_MEM_SIZE_128MB 0x08000000 - -#define K2_L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ -#define K2_L2CACHE_512KB 0x00 /* 512KB */ -#define K2_L2CACHE_256KB 0x01 /* 256KB */ -#define K2_L2CACHE_1MB 0x02 /* 1MB */ -#define K2_L2CACHE_NONE 0x03 /* None */ - -#define K2_GEO_ADR_MASK 0x1f - -#define K2_SYS_SLOT_MASK 0x08 - -#endif /* __PPC_PLATFORMS_K2_H */ -- cgit v1.2.3