From fc18d6c0479d5b6da281590a8caf166d60cc748b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 24 Jun 2007 11:19:42 +0200 Subject: hwmon/w83627ehf: Add support for the VID inputs The W83627EHF and similar chips have 6 VID input pins, add support for them. The driver changes the input voltage level automatically if the current setting is not correct for the detected CPU model. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/w83627ehf | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/hwmon') diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index 030fac6cec7a..ccc2bcb61068 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -22,9 +22,9 @@ This driver implements support for the Winbond W83627EHF, W83627EHG, and W83627DHG super I/O chips. We will refer to them collectively as Winbond chips. The chips implement three temperature sensors, five fan rotation -speed sensors, ten analog voltage sensors (only nine for the 627DHG), alarms -with beep warnings (control unimplemented), and some automatic fan regulation -strategies (plus manual fan control mode). +speed sensors, ten analog voltage sensors (only nine for the 627DHG), one +VID (6 pins), alarms with beep warnings (control unimplemented), and +some automatic fan regulation strategies (plus manual fan control mode). Temperatures are measured in degrees Celsius and measurement resolution is 1 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when -- cgit v1.2.3