From 9875cf806403fae66b2410a3c2cc820d97731e04 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 14 Jan 2011 18:45:21 +0000 Subject: Add a dentry op to handle automounting rather than abusing follow_link() Add a dentry op (d_automount) to handle automounting directories rather than abusing the follow_link() inode operation. The operation is keyed off a new dentry flag (DCACHE_NEED_AUTOMOUNT). This also makes it easier to add an AT_ flag to suppress terminal segment automount during pathwalk and removes the need for the kludge code in the pathwalk algorithm to handle directories with follow_link() semantics. The ->d_automount() dentry operation: struct vfsmount *(*d_automount)(struct path *mountpoint); takes a pointer to the directory to be mounted upon, which is expected to provide sufficient data to determine what should be mounted. If successful, it should return the vfsmount struct it creates (which it should also have added to the namespace using do_add_mount() or similar). If there's a collision with another automount attempt, NULL should be returned. If the directory specified by the parameter should be used directly rather than being mounted upon, -EISDIR should be returned. In any other case, an error code should be returned. The ->d_automount() operation is called with no locks held and may sleep. At this point the pathwalk algorithm will be in ref-walk mode. Within fs/namei.c itself, a new pathwalk subroutine (follow_automount()) is added to handle mountpoints. It will return -EREMOTE if the automount flag was set, but no d_automount() op was supplied, -ELOOP if we've encountered too many symlinks or mountpoints, -EISDIR if the walk point should be used without mounting and 0 if successful. The path will be updated to point to the mounted filesystem if a successful automount took place. __follow_mount() is replaced by follow_managed() which is more generic (especially with the patch that adds ->d_manage()). This handles transits from directories during pathwalk, including automounting and skipping over mountpoints (and holding processes with the next patch). __follow_mount_rcu() will jump out of RCU-walk mode if it encounters an automount point with nothing mounted on it. follow_dotdot*() does not handle automounts as you don't want to trigger them whilst following "..". I've also extracted the mount/don't-mount logic from autofs4 and included it here. It makes the mount go ahead anyway if someone calls open() or creat(), tries to traverse the directory, tries to chdir/chroot/etc. into the directory, or sticks a '/' on the end of the pathname. If they do a stat(), however, they'll only trigger the automount if they didn't also say O_NOFOLLOW. I've also added an inode flag (S_AUTOMOUNT) so that filesystems can mark their inodes as automount points. This flag is automatically propagated to the dentry as DCACHE_NEED_AUTOMOUNT by __d_instantiate(). This saves NFS and could save AFS a private flag bit apiece, but is not strictly necessary. It would be preferable to do the propagation in d_set_d_op(), but that doesn't normally have access to the inode. [AV: fixed breakage in case if __follow_mount_rcu() fails and nameidata_drop_rcu() succeeds in RCU case of do_lookup(); we need to fall through to non-RCU case after that, rather than just returning with ungrabbed *path] Signed-off-by: David Howells Was-Acked-by: Ian Kent Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/filesystems/Locking') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 977d8919cc69..5f0c52a07386 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -19,6 +19,7 @@ prototypes: void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen); + struct vfsmount *(*d_automount)(struct path *path); locking rules: rename_lock ->d_lock may block rcu-walk @@ -29,6 +30,7 @@ d_delete: no yes no no d_release: no no yes no d_iput: no no yes no d_dname: no no no no +d_automount: no no yes no --------------------------- inode_operations --------------------------- prototypes: -- cgit v1.2.3 From cc53ce53c86924bfe98a12ea20b7465038a08792 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 14 Jan 2011 18:45:26 +0000 Subject: Add a dentry op to allow processes to be held during pathwalk transit Add a dentry op (d_manage) to permit a filesystem to hold a process and make it sleep when it tries to transit away from one of that filesystem's directories during a pathwalk. The operation is keyed off a new dentry flag (DCACHE_MANAGE_TRANSIT). The filesystem is allowed to be selective about which processes it holds and which it permits to continue on or prohibits from transiting from each flagged directory. This will allow autofs to hold up client processes whilst letting its userspace daemon through to maintain the directory or the stuff behind it or mounted upon it. The ->d_manage() dentry operation: int (*d_manage)(struct path *path, bool mounting_here); takes a pointer to the directory about to be transited away from and a flag indicating whether the transit is undertaken by do_add_mount() or do_move_mount() skipping through a pile of filesystems mounted on a mountpoint. It should return 0 if successful and to let the process continue on its way; -EISDIR to prohibit the caller from skipping to overmounted filesystems or automounting, and to use this directory; or some other error code to return to the user. ->d_manage() is called with namespace_sem writelocked if mounting_here is true and no other locks held, so it may sleep. However, if mounting_here is true, it may not initiate or wait for a mount or unmount upon the parameter directory, even if the act is actually performed by userspace. Within fs/namei.c, follow_managed() is extended to check with d_manage() first on each managed directory, before transiting away from it or attempting to automount upon it. follow_down() is renamed follow_down_one() and should only be used where the filesystem deliberately intends to avoid management steps (e.g. autofs). A new follow_down() is added that incorporates the loop done by all other callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS and CIFS do use it, their use is removed by converting them to use d_automount()). The new follow_down() calls d_manage() as appropriate. It also takes an extra parameter to indicate if it is being called from mount code (with namespace_sem writelocked) which it passes to d_manage(). follow_down() ignores automount points so that it can be used to mount on them. __follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to sleep. It would be possible to enter d_manage() in rcu-walk mode too, and have that determine whether to abort or not itself. That would allow the autofs daemon to continue on in rcu-walk mode. Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't required as every tranist from that directory will cause d_manage() to be invoked. It can always be set again when necessary. ========================== WHAT THIS MEANS FOR AUTOFS ========================== Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to trigger the automounting of indirect mounts, and both of these can be called with i_mutex held. autofs knows that the i_mutex will be held by the caller in lookup(), and so can drop it before invoking the daemon - but this isn't so for d_revalidate(), since the lock is only held on _some_ of the code paths that call it. This means that autofs can't risk dropping i_mutex from its d_revalidate() function before it calls the daemon. The bug could manifest itself as, for example, a process that's trying to validate an automount dentry that gets made to wait because that dentry is expired and needs cleaning up: mkdir S ffffffff8014e05a 0 32580 24956 Call Trace: [] :autofs4:autofs4_wait+0x674/0x897 [] avc_has_perm+0x46/0x58 [] autoremove_wake_function+0x0/0x2e [] :autofs4:autofs4_expire_wait+0x41/0x6b [] :autofs4:autofs4_revalidate+0x91/0x149 [] __lookup_hash+0xa0/0x12f [] lookup_create+0x46/0x80 [] sys_mkdirat+0x56/0xe4 versus the automount daemon which wants to remove that dentry, but can't because the normal process is holding the i_mutex lock: automount D ffffffff8014e05a 0 32581 1 32561 Call Trace: [] __mutex_lock_slowpath+0x60/0x9b [] do_path_lookup+0x2ca/0x2f1 [] .text.lock.mutex+0xf/0x14 [] do_rmdir+0x77/0xde [] tracesys+0x71/0xe0 [] tracesys+0xd5/0xe0 which means that the system is deadlocked. This patch allows autofs to hold up normal processes whilst the daemon goes ahead and does things to the dentry tree behind the automouter point without risking a deadlock as almost no locks are held in d_manage() and none in d_automount(). Signed-off-by: David Howells Was-Acked-by: Ian Kent Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/filesystems/Locking') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 5f0c52a07386..cbf98b989b11 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -20,6 +20,7 @@ prototypes: void (*d_iput)(struct dentry *, struct inode *); char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen); struct vfsmount *(*d_automount)(struct path *path); + int (*d_manage)(struct dentry *, bool); locking rules: rename_lock ->d_lock may block rcu-walk @@ -31,6 +32,7 @@ d_release: no no yes no d_iput: no no yes no d_dname: no no no no d_automount: no no yes no +d_manage: no no yes no --------------------------- inode_operations --------------------------- prototypes: -- cgit v1.2.3 From ab90911ff90cdab59b31c045c3f0ae480d14f29d Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 14 Jan 2011 18:46:51 +0000 Subject: Allow d_manage() to be used in RCU-walk mode Allow d_manage() to be called from pathwalk when it is in RCU-walk mode as well as when it is in Ref-walk mode. This permits __follow_mount_rcu() to call d_manage() directly. d_manage() needs a parameter to indicate that it is in RCU-walk mode as it isn't allowed to sleep if in that mode (but should return -ECHILD instead). autofs4_d_manage() can then be set to retain RCU-walk mode if the daemon accesses it and otherwise request dropping back to ref-walk mode. Signed-off-by: David Howells Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/filesystems/Locking') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index cbf98b989b11..39707748ed2d 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -32,7 +32,7 @@ d_release: no no yes no d_iput: no no yes no d_dname: no no no no d_automount: no no yes no -d_manage: no no yes no +d_manage: no no yes (ref-walk) maybe --------------------------- inode_operations --------------------------- prototypes: -- cgit v1.2.3