From 50dcfa0234753c32e1c838cc0e6d7952dda73201 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 4 Aug 2009 19:55:56 +0100 Subject: ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer to a KS8695_CLOCK_RATE. Issue pointed out by Russell King on arm-linux-kernel mailing list. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-ks8695/include/mach/hardware.h | 5 +++++ arch/arm/mach-ks8695/include/mach/timex.h | 5 +++-- drivers/serial/serial_ks8695.c | 2 +- drivers/watchdog/ks8695_wdt.c | 4 ++-- 4 files changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index 1d640d075b7e..e0f911d9e021 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -16,6 +16,11 @@ #include +/* + * Clocks are derived from MCLK, which is 25Mhz + */ +#define KS8695_CLOCK_RATE 25000000 + /* * Physical RAM address. */ diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h index 4682e350369b..10f716371bd3 100644 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ b/arch/arm/mach-ks8695/include/mach/timex.h @@ -14,7 +14,8 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -/* timers are derived from MCLK, which is 25MHz */ -#define CLOCK_TICK_RATE 25000000 +#include + +#define CLOCK_TICK_RATE KS8695_CLOCK_RATE #endif diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index 998e89dc5aaf..e0665630e4da 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -549,7 +549,7 @@ static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = { .mapbase = KS8695_UART_VA, .iotype = SERIAL_IO_MEM, .irq = KS8695_IRQ_UART_TX, - .uartclk = CLOCK_TICK_RATE * 16, + .uartclk = KS8695_CLOCK_RATE * 16, .fifosize = 16, .ops = &ks8695uart_pops, .flags = ASYNC_BOOT_AUTOCONF, diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 00b03eb43bf0..e1c82769b08e 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -66,7 +66,7 @@ static inline void ks8695_wdt_stop(void) static inline void ks8695_wdt_start(void) { unsigned long tmcon; - unsigned long tval = wdt_time * CLOCK_TICK_RATE; + unsigned long tval = wdt_time * KS8695_CLOCK_RATE; spin_lock(&ks8695_lock); /* disable timer0 */ @@ -103,7 +103,7 @@ static inline void ks8695_wdt_reload(void) static int ks8695_wdt_settimeout(int new_time) { /* - * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz + * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz * * Since WDV is a 16-bit counter, the maximum period is * 65536 / 0.256 = 256 seconds. -- cgit v1.2.3 From 3d81277b65b5b356d81e54fa71f04868cee739e2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 23 Sep 2009 15:45:02 +0100 Subject: ARM: 5724/1: U300 AB3100 boardinfo v5 This defines regulator platform data and board power regulator hogs for the ST-Ericsson U300 platform. Cc: Mark Brown Cc: Liam Girdwood Cc: Samuel Ortiz Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/Makefile | 1 + arch/arm/mach-u300/i2c.c | 248 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-u300/regulator.c | 88 +++++++++++++++ 3 files changed, 337 insertions(+) create mode 100644 arch/arm/mach-u300/regulator.c diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 885b5c027c1e..fab46fe9a71f 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_MMC) += mmc.o obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_I2C_STU300) += i2c.o +obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index 10be1f888b27..7bc2503f6442 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -9,13 +9,256 @@ */ #include #include +#include +#include +#include #include +/* + * Initial settings of ab3100 registers. + * Common for below LDO regulator settings are that + * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0). + * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode. + */ + +/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */ +#define LDO_A_SETTING 0x16 +/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_C_SETTING 0x10 +/* LDO_D 0x10: 2.65V, ON, sleep mode not used */ +#define LDO_D_SETTING 0x10 +/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_E_SETTING 0x10 +/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */ +#define LDO_E_SLEEP_SETTING 0x00 +/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */ +#define LDO_F_SETTING 0xD0 +/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */ +#define LDO_G_SETTING 0x00 +/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */ +#define LDO_H_SETTING 0x18 +/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */ +#define LDO_K_SETTING 0x00 +/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */ +#define LDO_EXT_SETTING 0x00 +/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */ +#define BUCK_SETTING 0x7D +/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ +#define BUCK_SLEEP_SETTING 0xAC + +static struct regulator_consumer_supply supply_ldo_c[] = { + { + .dev_name = "ab3100-codec", + .supply = "vaudio", /* Powers the codec */ + }, +}; + +/* + * This one needs to be a supply so we can turn it off + * in order to shut down the system. + */ +static struct regulator_consumer_supply supply_ldo_d[] = { + { + .dev = NULL, + .supply = "vana15", /* Powers the SoC (CPU etc) */ + }, +}; + +static struct regulator_consumer_supply supply_ldo_g[] = { + { + .dev_name = "mmci", + .supply = "vmmc", /* Powers MMC/SD card */ + }, +}; + +static struct regulator_consumer_supply supply_ldo_h[] = { + { + .dev_name = "xgam_pdi", + .supply = "vdisp", /* Powers camera, display etc */ + }, +}; + +static struct regulator_consumer_supply supply_ldo_k[] = { + { + .dev_name = "irda", + .supply = "vir", /* Power IrDA */ + }, +}; + +/* + * This is a placeholder for whoever wish to use the + * external power. + */ +static struct regulator_consumer_supply supply_ldo_ext[] = { + { + .dev = NULL, + .supply = "vext", /* External power */ + }, +}; + +/* Preset (hardware defined) voltages for these regulators */ +#define LDO_A_VOLTAGE 2750000 +#define LDO_C_VOLTAGE 2650000 +#define LDO_D_VOLTAGE 2650000 + +static struct ab3100_platform_data ab3100_plf_data = { + .reg_constraints = { + /* LDO A routing and constraints */ + { + .constraints = { + .name = "vrad", + .min_uV = LDO_A_VOLTAGE, + .max_uV = LDO_A_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + .boot_on = 1, + }, + }, + /* LDO C routing and constraints */ + { + .constraints = { + .min_uV = LDO_C_VOLTAGE, + .max_uV = LDO_C_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c), + .consumer_supplies = supply_ldo_c, + }, + /* LDO D routing and constraints */ + { + .constraints = { + .min_uV = LDO_D_VOLTAGE, + .max_uV = LDO_D_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + /* + * Actually this is boot_on but we need + * to reference count it externally to + * be able to shut down the system. + */ + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d), + .consumer_supplies = supply_ldo_d, + }, + /* LDO E routing and constraints */ + { + .constraints = { + .name = "vio", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .always_on = 1, + .boot_on = 1, + }, + }, + /* LDO F routing and constraints */ + { + .constraints = { + .name = "vana25", + .min_uV = 2500000, + .max_uV = 2500000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .always_on = 1, + .boot_on = 1, + }, + }, + /* LDO G routing and constraints */ + { + .constraints = { + .min_uV = 1500000, + .max_uV = 2850000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g), + .consumer_supplies = supply_ldo_g, + }, + /* LDO H routing and constraints */ + { + .constraints = { + .min_uV = 1200000, + .max_uV = 2750000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h), + .consumer_supplies = supply_ldo_h, + }, + /* LDO K routing and constraints */ + { + .constraints = { + .min_uV = 1800000, + .max_uV = 2750000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k), + .consumer_supplies = supply_ldo_k, + }, + /* External regulator interface. No fixed voltage specified. + * If we knew the voltage of the external regulator and it + * was connected on the board, we could add the (fixed) + * voltage for it here. + */ + { + .constraints = { + .min_uV = 0, + .max_uV = 0, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext), + .consumer_supplies = supply_ldo_ext, + }, + /* Buck converter routing and constraints */ + { + .constraints = { + .name = "vcore", + .min_uV = 1200000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .always_on = 1, + .boot_on = 1, + }, + }, + }, + .reg_initvals = { + LDO_A_SETTING, + LDO_C_SETTING, + LDO_E_SETTING, + LDO_E_SLEEP_SETTING, + LDO_F_SETTING, + LDO_G_SETTING, + LDO_H_SETTING, + LDO_K_SETTING, + LDO_EXT_SETTING, + BUCK_SETTING, + BUCK_SLEEP_SETTING, + LDO_D_SETTING, + }, +}; + static struct i2c_board_info __initdata bus0_i2c_board_info[] = { { .type = "ab3100", .addr = 0x48, .irq = IRQ_U300_IRQ0_EXT, + .platform_data = &ab3100_plf_data, }, }; @@ -38,6 +281,11 @@ void __init u300_i2c_register_board_devices(void) { i2c_register_board_info(0, bus0_i2c_board_info, ARRAY_SIZE(bus0_i2c_board_info)); + /* + * This makes the core shut down all unused regulators + * after all the initcalls have completed. + */ + regulator_has_full_constraints(); i2c_register_board_info(1, bus1_i2c_board_info, ARRAY_SIZE(bus1_i2c_board_info)); } diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c new file mode 100644 index 000000000000..9c53f01c62eb --- /dev/null +++ b/arch/arm/mach-u300/regulator.c @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-u300/regulator.c + * + * Copyright (C) 2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Handle board-bound regulators and board power not related + * to any devices. + * Author: Linus Walleij + */ +#include +#include +#include +#include +/* Those are just for writing in syscon */ +#include +#include +#include + +/* + * Regulators that power the board and chip and which are + * not copuled to specific drivers are hogged in these + * instances. + */ +static struct regulator *main_power_15; + +/* + * This function is used from pm.h to shut down the system by + * resetting all regulators in turn and then disable regulator + * LDO D (main power). + */ +void u300_pm_poweroff(void) +{ + sigset_t old, all; + + sigfillset(&all); + if (!sigprocmask(SIG_BLOCK, &all, &old)) { + /* Disable LDO D to shut down the system */ + if (main_power_15) + regulator_disable(main_power_15); + else + pr_err("regulator not available to shut down system\n"); + (void) sigprocmask(SIG_SETMASK, &old, NULL); + } + return; +} + +/* + * Hog the regulators needed to power up the board. + */ +static int __init u300_init_boardpower(void) +{ + int err; + u32 val; + + pr_info("U300: setting up board power\n"); + main_power_15 = regulator_get(NULL, "vana15"); + if (IS_ERR(main_power_15)) { + pr_err("could not get vana15"); + return PTR_ERR(main_power_15); + } + err = regulator_enable(main_power_15); + if (err) { + pr_err("could not enable vana15\n"); + return err; + } + + /* + * On U300 a special system controller register pulls up the DC + * until the vana15 (LDO D) regulator comes up. At this point, all + * regulators are set and we do not need power control via + * DC ON anymore. This function will likely be moved whenever + * the rest of the U300 power management is implemented. + */ + pr_info("U300: disable system controller pull-up\n"); + val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); + val &= ~U300_SYSCON_PMCR_DCON_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); + + /* Register globally exported PM poweroff hook */ + pm_power_off = u300_pm_poweroff; + + return 0; +} + +/* + * So at module init time we hog the regulator! + */ +module_init(u300_init_boardpower); -- cgit v1.2.3 From f9e8eefc603c40d57e4579f1b202f784e8367fe4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 24 Sep 2009 21:42:44 +0100 Subject: ARM: 5725/2: U300 switch MMCI to use regulator This switches the U300 over from using a custom translate_vdd function (which was just flipping blind bits in the hardware) to using the regulator that actually controls the MMC voltage. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/mmc.c | 64 +++--------------------------------------------- 1 file changed, 4 insertions(+), 60 deletions(-) diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 7b6b016786bb..109f5a6e71c7 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -40,64 +40,6 @@ static unsigned int mmc_status(struct device *dev) return mmci_card->mmc_inserted; } -/* - * Here follows a large chunk of code which will only be enabled if you - * have both the AB3100 chip mounted and the MMC subsystem activated. - */ - -static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage) -{ - int v; - - /* - * MMC Spec: - * bit 7: 1.70 - 1.95V - * bit 8 - 14: 2.0 - 2.6V - * bit 15 - 23: 2.7 - 3.6V - * - * ab3100 voltages: - * 000 - 2.85V - * 001 - 2.75V - * 010 - 1.8V - * 011 - 1.5V - */ - switch (voltage) { - case 8: - v = 3; - break; - case 9: - case 10: - case 11: - case 12: - case 13: - case 14: - case 15: - v = 1; - break; - case 16: - v = 1; - break; - case 17: - case 18: - case 19: - case 20: - case 21: - case 22: - case 23: - case 24: - v = 0; - break; - default: - v = 0; - break; - } - - /* PL180 voltage register bits */ - return v << 2; -} - - - static int mmci_callback(void *data) { struct mmci_card_event *mmci_card = data; @@ -154,9 +96,11 @@ int __devinit mmc_init(struct amba_device *adev) if (!mmci_card) return -ENOMEM; + /* + * Do not set ocr_mask or voltage translation function, + * we have a regulator we can control instead. + */ /* Nominally 2.85V on our platform */ - mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29; - mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd; mmci_card->mmc0_plat_data.status = mmc_status; mmci_card->mmc0_plat_data.gpio_wp = -1; mmci_card->mmc0_plat_data.gpio_cd = -1; -- cgit v1.2.3 From f51f78c06c7fb442d304b93b68b3a1ebe3785a55 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 25 Sep 2009 12:11:32 +0100 Subject: ARM: 5726/1: at91/USB: at91sam9g45 series USB host integration This is the at91 specific part of USB host integration. The EHCI high speed controller has a companion OHCI controller to manage USB full and low speed. They are sharing the same IRQ line and vbus pin. Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91sam9g45_devices.c | 56 ++++++++++++++++++++++++++++++++ arch/arm/mach-at91/board-sam9m10g45ek.c | 1 + arch/arm/mach-at91/include/mach/board.h | 1 + 3 files changed, 58 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index d581cff80c4c..003f4f91fa52 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -130,6 +130,62 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {} #endif +/* -------------------------------------------------------------------- + * USB Host HS (EHCI) + * Needs an OHCI host for low and full speed management + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +static u64 ehci_dmamask = DMA_BIT_MASK(32); +static struct at91_usbh_data usbh_ehci_data; + +static struct resource usbh_ehci_resources[] = { + [0] = { + .start = AT91SAM9G45_EHCI_BASE, + .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_UHPHS, + .end = AT91SAM9G45_ID_UHPHS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_usbh_ehci_device = { + .name = "atmel-ehci", + .id = -1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &usbh_ehci_data, + }, + .resource = usbh_ehci_resources, + .num_resources = ARRAY_SIZE(usbh_ehci_resources), +}; + +void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) +{ + int i; + + if (!data) + return; + + /* Enable VBus control for UHP ports */ + for (i = 0; i < data->ports; i++) { + if (data->vbus_pin[i]) + at91_set_gpio_output(data->vbus_pin[i], 0); + } + + usbh_ehci_data = *data; + at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); + platform_device_register(&at91_usbh_ehci_device); +} +#else +void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {} +#endif + + /* -------------------------------------------------------------------- * USB HS Device (Gadget) * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 64c3843f323d..1cf4d8681078 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -366,6 +366,7 @@ static void __init ek_board_init(void) at91_add_device_serial(); /* USB HS Host */ at91_add_device_usbh_ohci(&ek_usbh_hs_data); + at91_add_device_usbh_ehci(&ek_usbh_hs_data); /* USB HS Device */ at91_add_device_usba(&ek_usba_udc_data); /* SPI */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2f4fcedc02ba..2295d80dd893 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -98,6 +98,7 @@ struct at91_usbh_data { }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); +extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); /* NAND / SmartMedia */ struct atmel_nand_data { -- cgit v1.2.3 From cd3abf98aeaec9b23a926159856b54a95707ee88 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Fri, 23 Oct 2009 11:27:59 +0100 Subject: ARM: 5770/1: Add DMA Engine support to at91sam9g45 Add at91sam9g45 dependency to drivers/dma/Kconfig Signed-off-by: Yegor Yefremov Acked-by: Nicolas Ferre Signed-off-by: Russell King --- drivers/dma/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 5903a88351bf..668151977b8a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -52,7 +52,7 @@ config DW_DMAC config AT_HDMAC tristate "Atmel AHB DMA support" - depends on ARCH_AT91SAM9RL + depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 select DMA_ENGINE help Support the Atmel AHB DMA controller. This can be integrated in -- cgit v1.2.3 From 1ea60cf7062271f0d53d09268726aa1544bf4836 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Sun, 1 Nov 2009 18:40:50 +0100 Subject: ARM: 5778/1: AT91: Add cpuidle support This patch adds the support for cpuidle on AT91 SoCs, taken from the cpuidle support in mach-kirkwood. cpuidle needs sdram_selfrefresh_enable and _disable, so move their definition to a separate header file instead of duplicating the code already used in pm.c. Tested-by: Nicolas Ferre Signed-off-by: Albin Tonnerre Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/cpuidle.c | 94 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-at91/pm.c | 62 ++--------------------------- arch/arm/mach-at91/pm.h | 67 +++++++++++++++++++++++++++++++ 4 files changed, 166 insertions(+), 58 deletions(-) create mode 100644 arch/arm/mach-at91/cpuidle.c create mode 100644 arch/arm/mach-at91/pm.h diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ada440aab0c5..f9e12bb3fb4e 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -77,6 +77,7 @@ obj-y += leds.o # Power Management obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c new file mode 100644 index 000000000000..1cfeac1483d6 --- /dev/null +++ b/arch/arm/mach-at91/cpuidle.c @@ -0,0 +1,94 @@ +/* + * based on arch/arm/mach-kirkwood/cpuidle.c + * + * CPU idle support for AT91 SoC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The cpu idle uses wait-for-interrupt and RAM self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and RAM self refresh + */ + +#include +#include +#include +#include +#include +#include + +#include "pm.h" + +#define AT91_MAX_STATES 2 + +static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device); + +static struct cpuidle_driver at91_idle_driver = { + .name = "at91_idle", + .owner = THIS_MODULE, +}; + +/* Actual code that puts the SoC in different idle states */ +static int at91_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + u32 saved_lpr; + + local_irq_disable(); + do_gettimeofday(&before); + if (state == &dev->states[0]) + /* Wait for interrupt state */ + cpu_do_idle(); + else if (state == &dev->states[1]) { + asm("b 1f; .align 5; 1:"); + asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ + saved_lpr = sdram_selfrefresh_enable(); + cpu_do_idle(); + sdram_selfrefresh_disable(saved_lpr); + } + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +/* Initialize CPU idle by registering the idle states */ +static int at91_init_cpuidle(void) +{ + struct cpuidle_device *device; + + cpuidle_register_driver(&at91_idle_driver); + + device = &per_cpu(at91_cpuidle_device, smp_processor_id()); + device->state_count = AT91_MAX_STATES; + + /* Wait for interrupt state */ + device->states[0].enter = at91_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and RAM self refresh state */ + device->states[1].enter = at91_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "RAM_SR"); + strcpy(device->states[1].desc, "WFI and RAM Self Refresh"); + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "at91_init_cpuidle: Failed registering\n"); + return -EIO; + } + return 0; +} + +device_initcall(at91_init_cpuidle); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 4028724d490d..615668986480 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -29,62 +29,7 @@ #include #include "generic.h" - -#ifdef CONFIG_ARCH_AT91RM9200 -#include - -/* - * The AT91RM9200 goes into self-refresh mode with this command, and will - * terminate self-refresh automatically on the next SDRAM access. - */ -#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1) -#define sdram_selfrefresh_disable() do {} while (0) - -#elif defined(CONFIG_ARCH_AT91CAP9) -#include - -static u32 saved_lpr; - -static inline void sdram_selfrefresh_enable(void) -{ - u32 lpr; - - saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); - - lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); -} - -#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) - -#else -#include - -#ifdef CONFIG_ARCH_AT91SAM9263 -/* - * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; - * handle those cases both here and in the Suspend-To-RAM support. - */ -#define AT91_SDRAMC AT91_SDRAMC0 -#warning Assuming EB1 SDRAM controller is *NOT* used -#endif - -static u32 saved_lpr; - -static inline void sdram_selfrefresh_enable(void) -{ - u32 lpr; - - saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); - - lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); -} - -#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) - -#endif - +#include "pm.h" /* * Show the reason for the previous system reset. @@ -260,6 +205,7 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { + u32 saved_lpr; at91_gpio_suspend(); at91_irq_suspend(); @@ -315,9 +261,9 @@ static int at91_pm_enter(suspend_state_t state) */ asm("b 1f; .align 5; 1:"); asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - sdram_selfrefresh_enable(); + saved_lpr = sdram_selfrefresh_enable(); asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ - sdram_selfrefresh_disable(); + sdram_selfrefresh_disable(saved_lpr); break; case PM_SUSPEND_ON: diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h new file mode 100644 index 000000000000..08322c44df1a --- /dev/null +++ b/arch/arm/mach-at91/pm.h @@ -0,0 +1,67 @@ +#ifdef CONFIG_ARCH_AT91RM9200 +#include + +/* + * The AT91RM9200 goes into self-refresh mode with this command, and will + * terminate self-refresh automatically on the next SDRAM access. + * + * Self-refresh mode is exited as soon as a memory access is made, but we don't + * know for sure when that happens. However, we need to restore the low-power + * mode if it was enabled before going idle. Restoring low-power mode while + * still in self-refresh is "not recommended", but seems to work. + */ + +static inline u32 sdram_selfrefresh_enable(void) +{ + u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + + at91_sys_write(AT91_SDRAMC_LPR, 0); + at91_sys_write(AT91_SDRAMC_SRR, 1); + return saved_lpr; +} + +#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) + +#elif defined(CONFIG_ARCH_AT91CAP9) +#include + + +static inline u32 sdram_selfrefresh_enable(void) +{ + u32 saved_lpr, lpr; + + saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); + + lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; + at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + return saved_lpr; +} + +#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) + +#else +#include + +#ifdef CONFIG_ARCH_AT91SAM9263 +/* + * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; + * handle those cases both here and in the Suspend-To-RAM support. + */ +#define AT91_SDRAMC AT91_SDRAMC0 +#warning Assuming EB1 SDRAM controller is *NOT* used +#endif + +static inline u32 sdram_selfrefresh_enable(void) +{ + u32 saved_lpr, lpr; + + saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + + lpr = saved_lpr & ~AT91_SDRAMC_LPCB; + at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); + return saved_lpr; +} + +#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) + +#endif -- cgit v1.2.3 From 01c62c9b32ec122bf5e3edeecec4d826cb8e81e5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 3 Nov 2009 20:39:02 +0100 Subject: ARM: 5782/1: at91: support for eco920 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_MACH_ECO920 is enabled in at91rm9200dk_defconfig. The name is wrong, but this is better than adding another defconfig or don't get compile coverage at all. Signed-off-by: Uwe Kleine-König Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/configs/at91rm9200dk_defconfig | 1 + arch/arm/mach-at91/Kconfig | 5 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/board-eco920.c | 158 ++++++++++++++++++++++++++++++++ 4 files changed, 165 insertions(+) create mode 100644 arch/arm/mach-at91/board-eco920.c diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 238b218394e3..c97e1022ada1 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -120,6 +120,7 @@ CONFIG_ARCH_AT91RM9200DK=y # CONFIG_MACH_CARMEVA is not set # CONFIG_MACH_KB9200 is not set # CONFIG_MACH_ATEB9200 is not set +CONFIG_MACH_ECO920=y # # AT91RM9200 Feature Selections diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index e35d54d43e70..7878e3312861 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -163,6 +163,11 @@ config MACH_CPUAT91 Select this if you are using the Eukrea Electromatique's CPUAT91 board . +config MACH_ECO920 + bool "eco920" + help + Select this if you are using the eco920 board + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index f9e12bb3fb4e..709fbad4a3ee 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o +obj-$(CONFIG_MACH_ECO920) += board-eco920.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c new file mode 100644 index 000000000000..295a96609e71 --- /dev/null +++ b/arch/arm/mach-at91/board-eco920.c @@ -0,0 +1,158 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include + +#include + +#include +#include + +#include +#include +#include "generic.h" + +static void __init eco920_map_io(void) +{ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); + + /* DBGU on ttyS0. (Rx & Tx only */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init eco920_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata eco920_eth_data = { + .phy_irq_pin = AT91_PIN_PC2, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata eco920_usbh_data = { + .ports = 1, +}; + +static struct at91_udc_data __initdata eco920_udc_data = { + .vbus_pin = AT91_PIN_PB12, + .pullup_pin = AT91_PIN_PB13, +}; + +static struct at91_mmc_data __initdata eco920_mmc_data = { + .slot_b = 0, + .wire4 = 0, +}; + +static struct physmap_flash_data eco920_flash_data = { + .width = 2, +}; + +static struct resource eco920_flash_resource = { + .start = 0x11000000, + .end = 0x11ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device eco920_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &eco920_flash_data, + }, + .resource = &eco920_flash_resource, + .num_resources = 1, +}; + +static struct resource at91_beeper_resources[] = { + [0] = { + .start = AT91RM9200_BASE_TC3, + .end = AT91RM9200_BASE_TC3 + 0x39, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device at91_beeper = { + .name = "at91_beeper", + .id = 0, + .resource = at91_beeper_resources, + .num_resources = ARRAY_SIZE(at91_beeper_resources), +}; + +static struct spi_board_info eco920_spi_devices[] = { + { /* CAN controller */ + .modalias = "tlv5638", + .chip_select = 3, + .max_speed_hz = 20 * 1000 * 1000, + .mode = SPI_CPHA, + }, +}; + +static void __init eco920_board_init(void) +{ + at91_add_device_serial(); + at91_add_device_eth(&eco920_eth_data); + at91_add_device_usbh(&eco920_usbh_data); + at91_add_device_udc(&eco920_udc_data); + + at91_add_device_mmc(0, &eco920_mmc_data); + platform_device_register(&eco920_flash); + + at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) + | AT91_SMC_RWSETUP_(1) + | AT91_SMC_DBW_8 + | AT91_SMC_WSEN + | AT91_SMC_NWS_(15)); + + at91_set_A_periph(AT91_PIN_PC6, 1); + + at91_set_gpio_input(AT91_PIN_PA23, 0); + at91_set_deglitch(AT91_PIN_PA23, 1); + +/* Initialization of the Static Memory Controller for Chip Select 3 */ + at91_sys_write(AT91_SMC_CSR(3), + AT91_SMC_DBW_16 | /* 16 bit */ + AT91_SMC_WSEN | + AT91_SMC_NWS_(5) | /* wait states */ + AT91_SMC_TDF_(1) /* float time */ + ); + + at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); + at91_set_B_periph(AT91_PIN_PB6, 0); + platform_device_register(&at91_beeper); + + at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); +} + +MACHINE_START(ECO920, "eco920") + /* Maintainer: Sascha Hauer */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = eco920_map_io, + .init_irq = eco920_init_irq, + .init_machine = eco920_board_init, +MACHINE_END -- cgit v1.2.3 From 6635529987cd01f9af0c3996cf2e7b9e2bbb4aa7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 4 Nov 2009 00:00:44 +0100 Subject: ARM: 5783/1: Make it possible for U300 LDO D to shut down This changes the regulator platform config for U300 so that the LDO D regulator can change status and shut down the system and the pm_shutdown() hook in regulator.c starts working. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/i2c.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index 7bc2503f6442..c73ed06b6065 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -130,6 +130,7 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = LDO_D_VOLTAGE, .max_uV = LDO_D_VOLTAGE, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, /* * Actually this is boot_on but we need * to reference count it externally to -- cgit v1.2.3 From 12f56c6889b02453fe050268e9c676e0f8678560 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Wed, 28 Oct 2009 21:04:46 +0100 Subject: ARM: 5775/1: ep93xx: add keypad core support Add the core support needed by the ep93xx matrix keypad driver. The keypad driver unfortunately was merged early and the core support is missing. The clkdev support has been resolved and is now merged. This adds the platform device to the ep93xx core and supplies the functions needed to acquire/free the gpio pins and actually enable/disable the controller peripheral. Signed-off-by: H Hartley Sweeten Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 77 +++++++++++++++++++++++++ arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 + arch/arm/mach-ep93xx/include/mach/platform.h | 4 ++ 3 files changed, 82 insertions(+) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index b4357c388d2e..1f0d66561bbe 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,6 +31,7 @@ #include #include +#include #include #include @@ -728,6 +729,82 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) platform_device_register(&ep93xx_fb_device); } + +/************************************************************************* + * EP93xx matrix keypad peripheral handling + *************************************************************************/ +static struct resource ep93xx_keypad_resource[] = { + { + .start = EP93XX_KEY_MATRIX_PHYS_BASE, + .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_EP93XX_KEY, + .end = IRQ_EP93XX_KEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ep93xx_keypad_device = { + .name = "ep93xx-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), + .resource = ep93xx_keypad_resource, +}; + +void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) +{ + ep93xx_keypad_device.dev.platform_data = data; + platform_device_register(&ep93xx_keypad_device); +} + +int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) +{ + int err; + int i; + + for (i = 0; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_c; + err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_d; + } + + /* Enable the keypad controller; GPIO ports C and D used for keypad */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK); + + return 0; + +fail_gpio_d: + gpio_free(EP93XX_GPIO_LINE_C(i)); +fail_gpio_c: + for ( ; i >= 0; --i) { + gpio_free(EP93XX_GPIO_LINE_C(i)); + gpio_free(EP93XX_GPIO_LINE_D(i)); + } + return err; +} +EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio); + +void ep93xx_keypad_release_gpio(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < 8; i++) { + gpio_free(EP93XX_GPIO_LINE_C(i)); + gpio_free(EP93XX_GPIO_LINE_D(i)); + } + + /* Disable the keypad controller; GPIO ports C and D used for GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | + EP93XX_SYSCON_DEVCFG_GONK); +} +EXPORT_SYMBOL(ep93xx_keypad_release_gpio); + + extern void ep93xx_gpio_init(void); void __init ep93xx_init_devices(void) diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index b1f937eda29c..d55194a4c093 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -134,6 +134,7 @@ #define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) #define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) +#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) #define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) #define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 469fd968d517..c6dc14dbca18 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -8,6 +8,7 @@ struct i2c_gpio_platform_data; struct i2c_board_info; struct platform_device; struct ep93xxfb_mach_info; +struct ep93xx_keypad_platform_data; struct ep93xx_eth_data { @@ -39,6 +40,9 @@ void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); void ep93xx_pwm_release_gpio(struct platform_device *pdev); +void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); +int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); +void ep93xx_keypad_release_gpio(struct platform_device *pdev); void ep93xx_init_devices(void); extern struct sys_timer ep93xx_timer; -- cgit v1.2.3 From 5b642b4def8b963bb852b45c50653cd43c919f51 Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Tue, 17 Nov 2009 18:08:53 +0100 Subject: ARM: 5789/1: ep93xx: add missing file headers Just for the sake of consistency across the ep93xx-tree. Signed-off-by: Hubert Feurstein Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/include/mach/clkdev.h | 4 ++++ arch/arm/mach-ep93xx/include/mach/dma.h | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h index 04b37a89801c..50cb991eadeb 100644 --- a/arch/arm/mach-ep93xx/include/mach/clkdev.h +++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h @@ -1,3 +1,7 @@ +/* + * arch/arm/mach-ep93xx/include/mach/clkdev.h + */ + #ifndef __ASM_MACH_CLKDEV_H #define __ASM_MACH_CLKDEV_H diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index ef6bd9d13148..3a5961d3f3b1 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,3 +1,7 @@ +/* + * arch/arm/mach-ep93xx/include/mach/dma.h + */ + #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -- cgit v1.2.3 From 43234b1ef630388c2cffb34eeeaa84dd731602cc Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Tue, 17 Nov 2009 18:10:48 +0100 Subject: ARM: 5790/1: ep93xx: add missing newline between file header and code Just for the sake of consistency across the ep93xx-tree. Signed-off-by: Hubert Feurstein Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/include/mach/hardware.h | 1 + arch/arm/mach-ep93xx/include/mach/io.h | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 349fa7cb72d5..5a3ce024b593 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -1,6 +1,7 @@ /* * arch/arm/mach-ep93xx/include/mach/hardware.h */ + #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h index cebcc1c53d63..594b77f21054 100644 --- a/arch/arm/mach-ep93xx/include/mach/io.h +++ b/arch/arm/mach-ep93xx/include/mach/io.h @@ -1,6 +1,7 @@ /* * arch/arm/mach-ep93xx/include/mach/io.h */ + #ifndef __ASM_MACH_IO_H #define __ASM_MACH_IO_H -- cgit v1.2.3 From 59b559d7a39b590aecef583af58d123ff5876570 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Thu, 12 Nov 2009 06:20:54 +0100 Subject: ARM: 5786/1: Introduce plat-nomadik, MTU code re-organization Introduce the plat-nomadik folder for ST-Ericsson machines including the existing nomadik 8815 architecture. This also moves the existing MTU (MultiTimerUnit) of nomadik 8815 to the proposed plat-nomadik and adds HAS_MTU. The patch has been re-based to 2.6.32-rc6 Signed-off-by: srinidhi kasagar Acked-by: Alessandro Rubini Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/Makefile | 1 + arch/arm/mach-nomadik/Kconfig | 2 +- arch/arm/mach-nomadik/Makefile | 2 +- arch/arm/mach-nomadik/board-nhk8815.c | 27 +++++ arch/arm/mach-nomadik/include/mach/mtu.h | 45 -------- arch/arm/mach-nomadik/include/mach/setup.h | 2 +- arch/arm/mach-nomadik/timer.c | 164 ----------------------------- arch/arm/plat-nomadik/Kconfig | 22 ++++ arch/arm/plat-nomadik/Makefile | 5 + arch/arm/plat-nomadik/include/plat/mtu.h | 48 +++++++++ arch/arm/plat-nomadik/timer.c | 147 ++++++++++++++++++++++++++ 12 files changed, 254 insertions(+), 212 deletions(-) delete mode 100644 arch/arm/mach-nomadik/include/mach/mtu.h delete mode 100644 arch/arm/mach-nomadik/timer.c create mode 100644 arch/arm/plat-nomadik/Kconfig create mode 100644 arch/arm/plat-nomadik/Makefile create mode 100644 arch/arm/plat-nomadik/include/plat/mtu.h create mode 100644 arch/arm/plat-nomadik/timer.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1c4119c60040..76cd466ad48c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -787,6 +787,7 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/plat-mxc/Kconfig" source "arch/arm/mach-nomadik/Kconfig" +source "arch/arm/plat-nomadik/Kconfig" source "arch/arm/mach-netx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a73caaf66763..1bee36fa5fb1 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -176,6 +176,7 @@ machine-$(CONFIG_ARCH_MXC91231) := mxc91231 plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_PLAT_IOP) := iop +plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 2a02b49c40f0..3c5e0f522e9c 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -5,13 +5,13 @@ menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 + select HAS_MTU endmenu config NOMADIK_8815 bool - config I2C_BITBANG_8815NHK tristate "Driver for bit-bang busses found on the 8815 NHK" depends on I2C && MACH_NOMADIK_8815NHK diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 412040982a40..36f67fb207d2 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,7 +7,7 @@ # Object file lists. -obj-y += clock.o timer.o gpio.o +obj-y += clock.o gpio.o # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 6bfd537d5afb..116394484e71 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -25,11 +25,18 @@ #include #include #include + +#include + #include #include #include #include "clock.h" +/* Initial value for SRC control register: all timers use MXTAL/8 source */ +#define SRC_CR_INIT_MASK 0x00007fff +#define SRC_CR_INIT_VAL 0x2aaa8000 + /* These adresses span 16MB, so use three individual pages */ static struct resource nhk8815_nand_resources[] = { { @@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = { /* will add more devices */ }; +static void __init nomadik_timer_init(void) +{ + u32 src_cr; + + /* Configure timer sources in "system reset controller" ctrl reg */ + src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); + src_cr &= SRC_CR_INIT_MASK; + src_cr |= SRC_CR_INIT_VAL; + writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); + + /* Save global pointer to mtu, used by platform timer code */ + mtu_base = io_p2v(NOMADIK_MTU0_BASE); + + nmdk_timer_init(); +} + +static struct sys_timer nomadik_timer = { + .init = nomadik_timer_init, +}; + static void __init nhk8815_platform_init(void) { int i; diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h deleted file mode 100644 index 76da7f085330..000000000000 --- a/arch/arm/mach-nomadik/include/mach/mtu.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __ASM_ARCH_MTU_H -#define __ASM_ARCH_MTU_H - -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC - -#endif /* __ASM_ARCH_MTU_H */ - diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h index a4e468cf63da..b7897edf1f35 100644 --- a/arch/arm/mach-nomadik/include/mach/setup.h +++ b/arch/arm/mach-nomadik/include/mach/setup.h @@ -15,7 +15,7 @@ extern void cpu8815_map_io(void); extern void cpu8815_platform_init(void); extern void cpu8815_init_irq(void); -extern struct sys_timer nomadik_timer; +extern void nmdk_timer_init(void); #endif /* NOMADIK_8815 */ diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c deleted file mode 100644 index d1738e7061d4..000000000000 --- a/arch/arm/mach-nomadik/timer.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * linux/arch/arm/mach-nomadik/timer.c - * - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#define TIMER_CTRL 0x80 /* No divisor */ -#define TIMER_PERIODIC 0x40 -#define TIMER_SZ32BIT 0x02 - -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 - -static u32 nmdk_count; /* accumulated count */ -static u32 nmdk_cycle; /* write-once */ -static __iomem void *mtu_base; - -/* - * clocksource: the MTU device is a decrementing counters, so we negate - * the value being read. - */ -static cycle_t nmdk_read_timer(struct clocksource *cs) -{ - u32 count = readl(mtu_base + MTU_VAL(0)); - return nmdk_count + nmdk_cycle - count; - -} - -static struct clocksource nmdk_clksrc = { - .name = "mtu_0", - .rating = 120, - .read = nmdk_read_timer, - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * Clockevent device: currently only periodic mode is supported - */ -static void nmdk_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *dev) -{ - unsigned long flags; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* enable interrupts -- and count current value? */ - raw_local_irq_save(flags); - writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); - raw_local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_ONESHOT: - BUG(); /* Not supported, yet */ - /* FALLTHROUGH */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - /* disable irq */ - raw_local_irq_save(flags); - writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); - raw_local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device nmdk_clkevt = { - .name = "mtu_0", - .features = CLOCK_EVT_FEAT_PERIODIC, - .shift = 32, - .rating = 100, - .set_mode = nmdk_clkevt_mode, -}; - -/* - * IRQ Handler for the timer 0 of the MTU block. The irq is not shared - * as we are the only users of mtu0 by now. - */ -static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) -{ - /* ack: "interrupt clear register" */ - writel( 1 << 0, mtu_base + MTU_ICR); - - /* we can't count lost ticks, unfortunately */ - nmdk_count += nmdk_cycle; - nmdk_clkevt.event_handler(&nmdk_clkevt); - - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -static struct irqaction nmdk_timer_irq = { - .name = "Nomadik Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = nmdk_timer_interrupt, -}; - -static void nmdk_timer_reset(void) -{ - u32 cr; - - writel(0, mtu_base + MTU_CR(0)); /* off */ - - /* configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; - writel(cr, mtu_base + MTU_CR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); -} - -static void __init nmdk_timer_init(void) -{ - u32 src_cr; - unsigned long rate; - int bits; - - rate = CLOCK_TICK_RATE; /* 2.4MHz */ - nmdk_cycle = (rate + HZ/2) / HZ; - - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); - - /* Save global pointer to mtu, used by functions above */ - mtu_base = io_p2v(NOMADIK_MTU0_BASE); - - /* Init the timer and register clocksource */ - nmdk_timer_reset(); - - nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); - bits = 8*sizeof(nmdk_count); - nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); - - clocksource_register(&nmdk_clksrc); - - /* Register irq and clockevents */ - setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); - nmdk_clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&nmdk_clkevt); -} - -struct sys_timer nomadik_timer = { - .init = nmdk_timer_init, -}; diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig new file mode 100644 index 000000000000..e27ee3134056 --- /dev/null +++ b/arch/arm/plat-nomadik/Kconfig @@ -0,0 +1,22 @@ +# We keep common IP's here for Nomadik and other similar +# familiy of processors from ST-Ericsson. At the moment we have +# just MTU, others to follow soon. + +config PLAT_NOMADIK + bool + depends on ARCH_NOMADIK + default y + help + Common platform code for Nomadik and other ST-Ericsson + platforms. + +if PLAT_NOMADIK + +config HAS_MTU + bool + help + Support for Multi Timer Unit. MTU provides access + to multiple interrupt generating programmable + 32-bit free running decrementing counters. + +endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile new file mode 100644 index 000000000000..37c7cdd0f8f0 --- /dev/null +++ b/arch/arm/plat-nomadik/Makefile @@ -0,0 +1,5 @@ +# arch/arm/plat-nomadik/Makefile +# Copyright 2009 ST-Ericsson +# Licensed under GPLv2 + +obj-$(CONFIG_HAS_MTU) += timer.o diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h new file mode 100644 index 000000000000..42c907258b14 --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/mtu.h @@ -0,0 +1,48 @@ +#ifndef __PLAT_MTU_H +#define __PLAT_MTU_H + +/* should be set by the platform code */ +extern void __iomem *mtu_base; + +/* + * The MTU device hosts four different counters, with 4 set of + * registers. These are register names. + */ + +#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ +#define MTU_RIS 0x04 /* Raw interrupt status */ +#define MTU_MIS 0x08 /* Masked interrupt status */ +#define MTU_ICR 0x0C /* Interrupt clear register */ + +/* per-timer registers take 0..3 as argument */ +#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ +#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ +#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ +#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ + +/* bits for the control register */ +#define MTU_CRn_ENA 0x80 +#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ +#define MTU_CRn_PRESCALE_MASK 0x0c +#define MTU_CRn_PRESCALE_1 0x00 +#define MTU_CRn_PRESCALE_16 0x04 +#define MTU_CRn_PRESCALE_256 0x08 +#define MTU_CRn_32BITS 0x02 +#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ + +/* Other registers are usual amba/primecell registers, currently not used */ +#define MTU_ITCR 0xff0 +#define MTU_ITOP 0xff4 + +#define MTU_PERIPH_ID0 0xfe0 +#define MTU_PERIPH_ID1 0xfe4 +#define MTU_PERIPH_ID2 0xfe8 +#define MTU_PERIPH_ID3 0xfeC + +#define MTU_PCELL0 0xff0 +#define MTU_PCELL1 0xff4 +#define MTU_PCELL2 0xff8 +#define MTU_PCELL3 0xffC + +#endif /* __PLAT_MTU_H */ + diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c new file mode 100644 index 000000000000..62f18ad43a28 --- /dev/null +++ b/arch/arm/plat-nomadik/timer.c @@ -0,0 +1,147 @@ +/* + * linux/arch/arm/mach-nomadik/timer.c + * + * Copyright (C) 2008 STMicroelectronics + * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +static u32 nmdk_count; /* accumulated count */ +static u32 nmdk_cycle; /* write-once */ + +/* setup by the platform code */ +void __iomem *mtu_base; + +/* + * clocksource: the MTU device is a decrementing counters, so we negate + * the value being read. + */ +static cycle_t nmdk_read_timer(struct clocksource *cs) +{ + u32 count = readl(mtu_base + MTU_VAL(0)); + return nmdk_count + nmdk_cycle - count; + +} + +static struct clocksource nmdk_clksrc = { + .name = "mtu_0", + .rating = 120, + .read = nmdk_read_timer, + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/* + * Clockevent device: currently only periodic mode is supported + */ +static void nmdk_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ + unsigned long flags; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* enable interrupts -- and count current value? */ + raw_local_irq_save(flags); + writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); + raw_local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_ONESHOT: + BUG(); /* Not supported, yet */ + /* FALLTHROUGH */ + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* disable irq */ + raw_local_irq_save(flags); + writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); + raw_local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device nmdk_clkevt = { + .name = "mtu_0", + .features = CLOCK_EVT_FEAT_PERIODIC, + .shift = 32, + .rating = 100, + .set_mode = nmdk_clkevt_mode, +}; + +/* + * IRQ Handler for the timer 0 of the MTU block. The irq is not shared + * as we are the only users of mtu0 by now. + */ +static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) +{ + /* ack: "interrupt clear register" */ + writel(1 << 0, mtu_base + MTU_ICR); + + /* we can't count lost ticks, unfortunately */ + nmdk_count += nmdk_cycle; + nmdk_clkevt.event_handler(&nmdk_clkevt); + + return IRQ_HANDLED; +} + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static struct irqaction nmdk_timer_irq = { + .name = "Nomadik Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = nmdk_timer_interrupt, +}; + +static void nmdk_timer_reset(void) +{ + u32 cr; + + writel(0, mtu_base + MTU_CR(0)); /* off */ + + /* configure load and background-load, and fire it up */ + writel(nmdk_cycle, mtu_base + MTU_LR(0)); + writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); + cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; + writel(cr, mtu_base + MTU_CR(0)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); +} + +void __init nmdk_timer_init(void) +{ + unsigned long rate; + int bits; + + rate = CLOCK_TICK_RATE; /* 2.4MHz */ + nmdk_cycle = (rate + HZ/2) / HZ; + + /* Init the timer and register clocksource */ + nmdk_timer_reset(); + + nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); + bits = 8*sizeof(nmdk_count); + nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); + + if (clocksource_register(&nmdk_clksrc)) + printk(KERN_ERR "timer: failed to initialize clock " + "source %s\n", nmdk_clksrc.name); + + /* Register irq and clockevents */ + setup_irq(IRQ_MTU0, &nmdk_timer_irq); + nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.cpumask = cpumask_of(0); + clockevents_register_device(&nmdk_clkevt); +} -- cgit v1.2.3 From ffae4e014a4bff7b904e4b5ace2ae453b9d93519 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Sat, 28 Nov 2009 08:10:40 +0100 Subject: ARM: 5829/1: ARM: U8500 register definitions Adds register definitions, shared peripheral interrupt numbers (SHPI) and IO mappings for the U8500 core support. SHPI are assigned to [160:32] where first 32 interrupts are reserved. Reviewed-by: Alessandro Rubin Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/mach-ux500/include/mach/hardware.h | 131 ++++++++++++++++++++++++++++ arch/arm/mach-ux500/include/mach/io.h | 22 +++++ arch/arm/mach-ux500/include/mach/irqs.h | 71 +++++++++++++++ 3 files changed, 224 insertions(+) create mode 100644 arch/arm/mach-ux500/include/mach/hardware.h create mode 100644 arch/arm/mach-ux500/include/mach/io.h create mode 100644 arch/arm/mach-ux500/include/mach/irqs.h diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h new file mode 100644 index 000000000000..6da650202dc7 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2009 ST-Ericsson. + * + * U8500 hardware definitions + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +/* macros to get at IO space when running virtually + * We dont map all the peripherals, let ioremap do + * this for us. We map only very basic peripherals here. + */ +#define U8500_IO_VIRTUAL 0xf0000000 +#define U8500_IO_PHYSICAL 0xa0000000 + +/* this macro is used in assembly, so no cast */ +#define IO_ADDRESS(x) \ + (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) + +/* typesafe io address */ +#define __io_address(n) __io(IO_ADDRESS(n)) + +/* + * Base address definitions for U8500 Onchip IPs. All the + * peripherals are contained in a single 1 Mbyte region, with + * AHB peripherals at the bottom and APB peripherals at the + * top of the region. PER stands for PERIPHERAL region which + * itself divided into sub regions. + */ +#define U8500_PER3_BASE 0x80000000 +#define U8500_PER2_BASE 0x80110000 +#define U8500_PER1_BASE 0x80120000 +#define U8500_PER4_BASE 0x80150000 + +#define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER5_BASE 0xa03e0000 +#define U8500_PER7_BASE 0xa03d0000 + +#define U8500_SVA_BASE 0xa0100000 +#define U8500_SIA_BASE 0xa0200000 + +#define U8500_SGA_BASE 0xa0300000 +#define U8500_MCDE_BASE 0xa0350000 +#define U8500_DMA_BASE 0xa0362000 + +#define U8500_SCU_BASE 0xa0410000 +#define U8500_GIC_CPU_BASE 0xa0410100 +#define U8500_TWD_BASE 0xa0410600 +#define U8500_GIC_DIST_BASE 0xa0411000 +#define U8500_L2CC_BASE 0xa0412000 + +#define U8500_TWD_SIZE 0x100 + +/* per7 base addressess */ +#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000) +#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000) +#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000) +#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000) +#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) + +/* per6 base addressess */ +#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000) + +/* per5 base addressess */ +#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) +#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000) +#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000) + +/* per4 base addressess */ +#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000) +#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000) +#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000) +#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000) +#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000) +#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000) +#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000) +#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000) + +/* per3 base addressess */ +#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) +#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) +#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) +#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) +#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) +#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) +#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) +#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) +#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000) +#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000) + +/* per2 base addressess */ +#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) +#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) +#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) +#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) +#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) +#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) +#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) +#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) +#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) +#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) +#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) +#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000) +#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) + +/* per1 base addresses */ +#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) +#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) +#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) +#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) +#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) +#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) +#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) +#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000) +#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) +#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000) + +/* ST-Ericsson modified pl022 id */ +#define SSP_PER_ID 0x01080022 + +#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h new file mode 100644 index 000000000000..1cf3f44ce5b2 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-u8500/include/mach/io.h + * + * Copyright (C) 1997-1999 Russell King + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h new file mode 100644 index 000000000000..394b5dd2200f --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2008 STMicroelectronics + * Copyright (C) 2009 ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef ASM_ARCH_IRQS_H +#define ASM_ARCH_IRQS_H + +#include + +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 + +/* Shared Peripheral Interrupt (SHPI) */ +#define IRQ_SHPI_START 32 + +/* Interrupt numbers generic for shared peripheral */ +#define IRQ_MTU0 (IRQ_SHPI_START + 4) +#define IRQ_SPI2 (IRQ_SHPI_START + 6) +#define IRQ_SPI0 (IRQ_SHPI_START + 8) +#define IRQ_UART0 (IRQ_SHPI_START + 11) +#define IRQ_I2C3 (IRQ_SHPI_START + 12) +#define IRQ_SSP0 (IRQ_SHPI_START + 14) +#define IRQ_MTU1 (IRQ_SHPI_START + 17) +#define IRQ_RTC_RTT (IRQ_SHPI_START + 18) +#define IRQ_UART1 (IRQ_SHPI_START + 19) +#define IRQ_I2C0 (IRQ_SHPI_START + 21) +#define IRQ_I2C1 (IRQ_SHPI_START + 22) +#define IRQ_USBOTG (IRQ_SHPI_START + 23) +#define IRQ_DMA (IRQ_SHPI_START + 25) +#define IRQ_UART2 (IRQ_SHPI_START + 26) +#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29) +#define IRQ_MSP0 (IRQ_SHPI_START + 31) +#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) +#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) +#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) +#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) +#define IRQ_AB4500 (IRQ_SHPI_START + 40) +#define IRQ_DISP (IRQ_SHPI_START + 48) +#define IRQ_SiPI3 (IRQ_SHPI_START + 49) +#define IRQ_SSP1 (IRQ_SHPI_START + 52) +#define IRQ_I2C2 (IRQ_SHPI_START + 55) +#define IRQ_SDMMC0 (IRQ_SHPI_START + 60) +#define IRQ_MSP1 (IRQ_SHPI_START + 62) +#define IRQ_SPI1 (IRQ_SHPI_START + 96) +#define IRQ_MSP2 (IRQ_SHPI_START + 98) +#define IRQ_SDMMC4 (IRQ_SHPI_START + 99) +#define IRQ_HSIRD0 (IRQ_SHPI_START + 104) +#define IRQ_HSIRD1 (IRQ_SHPI_START + 105) +#define IRQ_HSITD0 (IRQ_SHPI_START + 106) +#define IRQ_HSITD1 (IRQ_SHPI_START + 107) +#define IRQ_GPIO0 (IRQ_SHPI_START + 119) +#define IRQ_GPIO1 (IRQ_SHPI_START + 120) +#define IRQ_GPIO2 (IRQ_SHPI_START + 121) +#define IRQ_GPIO3 (IRQ_SHPI_START + 122) +#define IRQ_GPIO4 (IRQ_SHPI_START + 123) +#define IRQ_GPIO5 (IRQ_SHPI_START + 124) +#define IRQ_GPIO6 (IRQ_SHPI_START + 125) +#define IRQ_GPIO7 (IRQ_SHPI_START + 126) +#define IRQ_GPIO8 (IRQ_SHPI_START + 127) + +/* There are 128 shared peripheral interrupts assigned to + * INTID[160:32]. The first 32 interrupts are reserved. + */ +#define NR_IRQS 161 + +#endif /*ASM_ARCH_IRQS_H*/ -- cgit v1.2.3 From c6b503caef9abefb2e90ac83f672b75dc14bacd0 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Sat, 28 Nov 2009 08:15:01 +0100 Subject: ARM: 5830/1: ARM: U8500 clock framework Adds basic clock framework to the U8500 platform. Currently it just uses the clock lookup table and add the each entry to the clkdevice. More complex clock management to follow soon Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/mach-ux500/clock.c | 95 +++++++++++++++++++++++++++++++ arch/arm/mach-ux500/include/mach/clkdev.h | 7 +++ 2 files changed, 102 insertions(+) create mode 100644 arch/arm/mach-ux500/clock.c create mode 100644 arch/arm/mach-ux500/include/mach/clkdev.h diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c new file mode 100644 index 000000000000..20b6ebb6783a --- /dev/null +++ b/arch/arm/mach-ux500/clock.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * heavily based on realview platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +/* currently the clk structure + * just supports rate. This would + * be extended as and when new devices are + * added - TODO + */ +struct clk { + unsigned long rate; +}; + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + /*TODO*/ + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +/* ssp clock */ +static struct clk ssp_clk = { + .rate = 48000000, +}; + +/* fixed clock */ +static struct clk f38_clk = { + .rate = 38400000, +}; + +static struct clk_lookup lookups[] = { + { + /* UART0 */ + .dev_id = "uart0", + .clk = &f38_clk, + }, { /* UART1 */ + .dev_id = "uart1", + .clk = &f38_clk, + }, { /* UART2 */ + .dev_id = "uart2", + .clk = &f38_clk, + }, { /* SSP */ + .dev_id = "pl022", + .clk = &ssp_clk, + } +}; + +static int __init clk_init(void) +{ + int i; + + /* register the clock lookups */ + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h new file mode 100644 index 000000000000..04b37a89801c --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif -- cgit v1.2.3 From aa44ef4d43b200c0e318ade2a3c24d00a6fd942a Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Sat, 28 Nov 2009 08:17:18 +0100 Subject: ARM: 5831/1: ARM: U8500 core machine support Adds core support for the ST-Ericsson U8500 platform. It supports memory mappings, binds to the existing modules like GIC, SCU, TWD and local timers and sets up the infrastructure for the secondary core. Reviewed-by: Alessandro Rubini Reviewed-by: Linus Walleij Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/mach-ux500/Kconfig | 15 +++ arch/arm/mach-ux500/Makefile | 8 ++ arch/arm/mach-ux500/board-mop500.c | 158 ++++++++++++++++++++++ arch/arm/mach-ux500/cpu-u8500.c | 64 +++++++++ arch/arm/mach-ux500/headsmp.S | 38 ++++++ arch/arm/mach-ux500/include/mach/debug-macro.S | 19 +++ arch/arm/mach-ux500/include/mach/entry-macro.S | 89 +++++++++++++ arch/arm/mach-ux500/include/mach/memory.h | 18 +++ arch/arm/mach-ux500/include/mach/setup.h | 23 ++++ arch/arm/mach-ux500/include/mach/smp.h | 32 +++++ arch/arm/mach-ux500/include/mach/system.h | 25 ++++ arch/arm/mach-ux500/include/mach/timex.h | 6 + arch/arm/mach-ux500/include/mach/uncompress.h | 58 ++++++++ arch/arm/mach-ux500/include/mach/vmalloc.h | 18 +++ arch/arm/mach-ux500/localtimer.c | 28 ++++ arch/arm/mach-ux500/platsmp.c | 177 +++++++++++++++++++++++++ 16 files changed, 776 insertions(+) create mode 100644 arch/arm/mach-ux500/Kconfig create mode 100644 arch/arm/mach-ux500/Makefile create mode 100644 arch/arm/mach-ux500/board-mop500.c create mode 100644 arch/arm/mach-ux500/cpu-u8500.c create mode 100644 arch/arm/mach-ux500/headsmp.S create mode 100644 arch/arm/mach-ux500/include/mach/debug-macro.S create mode 100644 arch/arm/mach-ux500/include/mach/entry-macro.S create mode 100644 arch/arm/mach-ux500/include/mach/memory.h create mode 100644 arch/arm/mach-ux500/include/mach/setup.h create mode 100644 arch/arm/mach-ux500/include/mach/smp.h create mode 100644 arch/arm/mach-ux500/include/mach/system.h create mode 100644 arch/arm/mach-ux500/include/mach/timex.h create mode 100644 arch/arm/mach-ux500/include/mach/uncompress.h create mode 100644 arch/arm/mach-ux500/include/mach/vmalloc.h create mode 100644 arch/arm/mach-ux500/localtimer.c create mode 100644 arch/arm/mach-ux500/platsmp.c diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig new file mode 100644 index 000000000000..03625d744857 --- /dev/null +++ b/arch/arm/mach-ux500/Kconfig @@ -0,0 +1,15 @@ +menu "ST-Ericsson platform type" + depends on ARCH_U8500 + +comment "ST-Ericsson Multicore Mobile Platforms" + +config MACH_U8500_MOP + bool "U8500 Early Development platform" + default y + select ARM_GIC + select HAS_MTU + help + Include support for mop500 development platform + based on U8500 architecture. The platform is based + on early drop silicon version of 8500. +endmenu diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile new file mode 100644 index 000000000000..95e6e24c0042 --- /dev/null +++ b/arch/arm/mach-ux500/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel, U8500 machine. +# + +obj-y := clock.o +obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o +obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c new file mode 100644 index 000000000000..aa5afbcc90f9 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson + * + * Author: Srinidhi KASAGAR + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include + +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + +/* These are active devices on this board */ +static struct amba_device uart0_device = { + .dev = { .init_name = "uart0" }, + __MEM_4K_RESOURCE(U8500_UART0_BASE), + .irq = {IRQ_UART0, NO_IRQ}, +}; + +static struct amba_device uart1_device = { + .dev = { .init_name = "uart1" }, + __MEM_4K_RESOURCE(U8500_UART1_BASE), + .irq = {IRQ_UART1, NO_IRQ}, +}; + +static struct amba_device uart2_device = { + .dev = { .init_name = "uart2" }, + __MEM_4K_RESOURCE(U8500_UART2_BASE), + .irq = {IRQ_UART2, NO_IRQ}, +}; + +static void ab4500_spi_cs_control(u32 command) +{ + /* set the FRM signal, which is CS - TODO */ +} + +struct pl022_config_chip ab4500_chip_info = { + .lbm = LOOPBACK_DISABLED, + .com_mode = INTERRUPT_TRANSFER, + .iface = SSP_INTERFACE_MOTOROLA_SPI, + /* we can act as master only */ + .hierarchy = SSP_MASTER, + .slave_tx_disable = 0, + .endian_rx = SSP_RX_MSB, + .endian_tx = SSP_TX_MSB, + .data_size = SSP_DATA_BITS_24, + .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .clk_phase = SSP_CLK_SECOND_EDGE, + .clk_pol = SSP_CLK_POL_IDLE_HIGH, + .cs_control = ab4500_spi_cs_control, +}; + +static struct spi_board_info u8500_spi_devices[] = { + { + .modalias = "ab4500", + .controller_data = &ab4500_chip_info, + .max_speed_hz = 12000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .irq = IRQ_AB4500, + }, +}; + +static struct pl022_ssp_controller ssp0_platform_data = { + .bus_id = 0, + /* pl022 not yet supports dma */ + .enable_dma = 0, + /* on this platform, gpio 31,142,144,214 & + * 224 are connected as chip selects + */ + .num_chipselect = 5, +}; + +static struct amba_device pl022_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "pl022", + .platform_data = &ssp0_platform_data, + }, + .res = { + .start = U8500_SSP0_BASE, + .end = U8500_SSP0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_SSP0, NO_IRQ }, + /* ST-Ericsson modified id */ + .periphid = SSP_PER_ID, +}; + +static struct amba_device *amba_devs[] __initdata = { + &uart0_device, + &uart1_device, + &uart2_device, + &pl022_device, +}; + +static void __init u8500_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + /* Setup the local timer base */ + twd_base = __io_address(U8500_TWD_BASE); +#endif + /* Setup the MTU base */ + mtu_base = __io_address(U8500_MTU0_BASE); + + nmdk_timer_init(); +} + +static struct sys_timer u8500_timer = { + .init = u8500_timer_init, +}; + +static void __init u8500_init_machine(void) +{ + int i; + + /* Register the active AMBA devices on this board */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); + + spi_register_board_info(u8500_spi_devices, + ARRAY_SIZE(u8500_spi_devices)); + + u8500_init_devices(); +} + +MACHINE_START(U8500, "ST-Ericsson MOP500 platform") + /* Maintainer: Srinidhi Kasagar */ + .phys_io = U8500_UART2_BASE, + .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc, + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = u8500_init_irq, + /* we re-use nomadik timer here */ + .timer = &u8500_timer, + .init_machine = u8500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c new file mode 100644 index 000000000000..5f05e5850f71 --- /dev/null +++ b/arch/arm/mach-ux500/cpu-u8500.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson + * + * Author: Srinidhi KASAGAR + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* add any platform devices here - TODO */ +static struct platform_device *platform_devs[] __initdata = { + /* yet to be added, add i2c0, gpio.. */ +}; + +#define __IO_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_DEVICE, \ +} + +/* minimum static i/o mapping required to boot U8500 platforms */ +static struct map_desc u8500_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), +}; + +void __init u8500_map_io(void) +{ + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); +} + +void __init u8500_init_irq(void) +{ + gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29); + gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); +} + +/* + * This function is called from the board init + */ +void __init u8500_init_devices(void) +{ + /* Register the platform devices */ + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + + return ; +} diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S new file mode 100644 index 000000000000..a6be2cdf2b2f --- /dev/null +++ b/arch/arm/mach-ux500/headsmp.S @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2009 ST-Ericsson + * This file is based ARM Realview platform + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + + __INIT + +/* + * U8500 specific entry point for secondary CPUs. + */ +ENTRY(u8500_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 + dsb +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S new file mode 100644 index 000000000000..8f21b6a95dce --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -0,0 +1,19 @@ +/* + * Debugging macro include header + * + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @MMU enabled? + moveq \rx, #0x80000000 @MMU off, Physical address + movne \rx, #0xF0000000 @MMU on, Virtual address + orr \rx, \rx, #0x7000 + .endm + +#include diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S new file mode 100644 index 000000000000..eece3301fef7 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -0,0 +1,89 @@ +/* + * Low-level IRQ helper macros for U8500 platforms + * + * Copyright (C) 2009 ST-Ericsson. + * + * This file is a copy of ARM Realview platform. + * -just satisfied checkpatch script. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE) + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an + * interrupt if it's between 30 and 1020. The test_for_ipi + * routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number + * of the highest priority enabled interrupt. We then just + * need to check whether it is in the valid range for an + * IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + /* bits 12-10 = src CPU, 9-0 = int # */ + ldr \irqstat, [\base, #GIC_CPU_INTACK] + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ + * acknowledge register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of + * interrupt on the controller, since this requires the + * original irqstat value which we won't easily be able + * to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base + * are preserved.. + */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h new file mode 100644 index 000000000000..510571a59e25 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/memory.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) +#define BUS_OFFSET UL(0x00000000) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h new file mode 100644 index 000000000000..cf0ce1687f24 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2009 ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * These symbols are needed for board-specific files to call their + * own cpu-specific files + */ +#ifndef __ASM_ARCH_SETUP_H +#define __ASM_ARCH_SETUP_H + +#include +#include + +extern void u8500_map_io(void); +extern void u8500_init_devices(void); +extern void u8500_init_irq(void); +/* We re-use nomadik_timer for this platform */ +extern void nmdk_timer_init(void); + +#endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h new file mode 100644 index 000000000000..b59f7bc9725d --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/smp.h @@ -0,0 +1,32 @@ +/* + * This file is based ARM realview platform. + * Copyright (C) ARM Limited. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef ASMARM_ARCH_SMP_H +#define ASMARM_ARCH_SMP_H + +#include + +/* This is required to wakeup the secondary core */ +extern void u8500_secondary_startup(void); + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} +#endif diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h new file mode 100644 index 000000000000..c0cd8006f1a2 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/system.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2009 ST-Ericsson. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* yet to be implemented - TODO */ +} + +#endif diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h new file mode 100644 index 000000000000..d0942c174018 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/timex.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 110000000 + +#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h new file mode 100644 index 000000000000..8552eb188b50 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include +#include +#include + +#define U8500_UART_DR 0x80007000 +#define U8500_UART_LCRH 0x8000702c +#define U8500_UART_CR 0x80007030 +#define U8500_UART_FR 0x80007018 + +static void putc(const char c) +{ + /* Do nothing if the UART is not enabled. */ + if (!(readb(U8500_UART_CR) & 0x1)) + return; + + if (c == '\n') + putc('\r'); + + while (readb(U8500_UART_FR) & (1 << 5)) + barrier(); + writeb(c, U8500_UART_DR); +} + +static void flush(void) +{ + if (!(readb(U8500_UART_CR) & 0x1)) + return; + while (readb(U8500_UART_FR) & (1 << 3)) + barrier(); +} + +static inline void arch_decomp_setup(void) +{ +} + +#define arch_decomp_wdog() /* nothing to do here */ + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h new file mode 100644 index 000000000000..86cdbbce1842 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/vmalloc.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END 0xf0000000 diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c new file mode 100644 index 000000000000..2288f6a7c518 --- /dev/null +++ b/arch/arm/mach-ux500/localtimer.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson + * Srinidhi Kasagar + * + * This file is heavily based on relaview platform, almost a copy. + * + * Copyright (C) 2002 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#include +#include +#include + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c new file mode 100644 index 000000000000..8dfe7ca245d8 --- /dev/null +++ b/arch/arm/mach-ux500/platsmp.c @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2002 ARM Ltd. + * Copyright (C) 2008 STMicroelctronics. + * Copyright (C) 2009 ST-Ericsson. + * Author: Srinidhi Kasagar + * + * This file is based on arm realview platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static unsigned int __init get_core_count(void) +{ + return scu_get_core_count(__io_address(U8500_SCU_BASE)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + */ + pen_release = cpu; + flush_cache_all(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init wakeup_secondary(void) +{ + /* nobody is to be released from the pen yet */ + pen_release = -1; + + /* + * write the address of secondary startup into the backup ram register + * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the + * backup ram register at offset 0x1FF0, which is what boot rom code + * is waiting for. This would wake up the secondary core from WFE + */ +#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4 + __raw_writel(virt_to_phys(u8500_secondary_startup), + (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + U8500_CPU1_JUMPADDR_OFFSET); + +#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 + __raw_writel(0xA1FEED01, + (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + U8500_CPU1_WAKEMAGIC_OFFSET); + + /* make sure write buffer is drained */ + mb(); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "U8500: strange CM count of 0? Default to 1\n"); + ncores = 1; + } + + if (ncores > num_possible_cpus()) { + printk(KERN_WARNING + "U8500: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, num_possible_cpus()); + ncores = num_possible_cpus(); + } + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + scu_enable(__io_address(U8500_SCU_BASE)); + wakeup_secondary(); + } +} -- cgit v1.2.3 From 4e4eb42999ae155c3ac1cdb5dacbd419184064fb Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Sat, 28 Nov 2009 08:19:07 +0100 Subject: ARM: 5832/1: ARM: U8500 Makefile.boot The Makefile.boot for the U8500 platform Signed-off-by: srinidhi kasagar Signed-off-by: Russell King --- arch/arm/mach-ux500/Makefile.boot | 4 ++++ 1 file changed, 4 insertions(+) create mode 100644 arch/arm/mach-ux500/Makefile.boot diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot new file mode 100644 index 000000000000..c7e75acfe6c9 --- /dev/null +++ b/arch/arm/mach-ux500/Makefile.boot @@ -0,0 +1,4 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 + -- cgit v1.2.3 From e3fd17458e4721d4ae0f0aab1c79b039575ac9c6 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Sat, 28 Nov 2009 08:22:58 +0100 Subject: ARM: 5833/1: ARM nomadik: enable U8500 for common platform Enable U8500 architecture to get access to the common code shared across various ST-Ericsson's machines like nomadik. Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/plat-nomadik/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index e27ee3134056..159daf583f85 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -4,7 +4,7 @@ config PLAT_NOMADIK bool - depends on ARCH_NOMADIK + depends on ARCH_NOMADIK || ARCH_U8500 default y help Common platform code for Nomadik and other ST-Ericsson -- cgit v1.2.3 From 850265e84d1040e769d8762640e4e5f34ae2f45d Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Sat, 28 Nov 2009 08:24:47 +0100 Subject: ARM: 5834/1: ARM: U8500 integrate to ARM architecture This hooks the U8500 support into the ARM kbuild system. This integration also enables SMP and its helper functions for U8500 platform Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/Kconfig | 20 ++++++++++++++++---- arch/arm/Makefile | 1 + 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 76cd466ad48c..1ae18d879e12 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -702,6 +702,16 @@ config ARCH_BCMRING help Support for Broadcom's BCMRing platform. +config ARCH_U8500 + bool "ST-Ericsson U8500 Series" + select CPU_V7 + select ARM_AMBA + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select COMMON_CLKDEV + help + Support for ST-Ericsson's Ux500 architecture + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -805,6 +815,8 @@ source "arch/arm/mach-w90x900/Kconfig" source "arch/arm/mach-bcmring/Kconfig" +source "arch/arm/mach-ux500/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -956,10 +968,10 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4) + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4) + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1028,9 +1040,9 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ - REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4) + REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) default y - select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4) + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1bee36fa5fb1..7603eba7c0cd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -166,6 +166,7 @@ machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_STMP378X) := stmp378x machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_U300) := u300 +machine-$(CONFIG_ARCH_U8500) := ux500 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge -- cgit v1.2.3 From 71abe6f5cea3be6819f93907b37bb4ec826720ae Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Tue, 1 Dec 2009 05:43:53 +0100 Subject: ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Signed-off-by: Russell King --- arch/arm/configs/u8500_defconfig | 680 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 680 insertions(+) create mode 100644 arch/arm/configs/u8500_defconfig diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig new file mode 100644 index 000000000000..15fde22ce3f3 --- /dev/null +++ b/arch/arm/configs/u8500_defconfig @@ -0,0 +1,680 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Mon Nov 30 11:11:29 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_ARCH_U8500=y +CONFIG_PLAT_NOMADIK=y +CONFIG_HAS_MTU=y + +# +# ST-Ericsson platform type +# + +# +# ST-Ericsson Multicore Mobile Platforms +# +CONFIG_MACH_U8500_MOP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_ARM_GIC=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_LOCAL_TIMERS=y +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PL022=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 870725d9fcdecb23eab696d405fa90df46151865 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Tue, 1 Dec 2009 13:41:24 +0100 Subject: ARM: 5836/1: add MAINTAINERS entry Add MAINTAINERS entry for U8500 SoC Signed-off-by: srinidhi kasagar Acked-by: Andrea Gallo Signed-off-by: Russell King --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d62754..2c719e1fca71 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -893,6 +893,12 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.mcuos.com S: Maintained +ARM/U8500 ARM ARCHITECTURE +M: Srinidhi Kasagar +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-ux500/ + ARM/VFP SUPPORT M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v1.2.3 From 9b5b495281821167f67ca82070a631fbde46ce61 Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Tue, 1 Dec 2009 13:55:19 +0100 Subject: ARM: 5838/1: add nuc950_defconfig add nuc950_defconfig Signed-off-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/configs/nuc950_defconfig | 922 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 922 insertions(+) create mode 100644 arch/arm/configs/nuc950_defconfig diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig new file mode 100644 index 000000000000..df1de9b45ca4 --- /dev/null +++ b/arch/arm/configs/nuc950_defconfig @@ -0,0 +1,922 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc7 +# Tue Nov 17 12:31:33 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +CONFIG_USER_NS=y +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_W90X900=y +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_CPU_NUC950=y + +# +# W90P910 Machines +# +# CONFIG_MACH_W90P910EVB is not set + +# +# NUC950 Machines +# +CONFIG_MACH_W90P950EVB=y + +# +# NUC960 Machines +# +# CONFIG_MACH_W90N960EVB is not set + +# +# NUC932 Machines +# +# CONFIG_MACH_NUC932EVB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 6aeb4e4a9d3e5c53ebaaeee6bd9cce41a3b8eb09 Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Tue, 1 Dec 2009 13:57:28 +0100 Subject: ARM: 5839/1: add nuc960_defconfig add nuc960_defconfig Signed-off-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/configs/nuc960_defconfig | 922 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 922 insertions(+) create mode 100644 arch/arm/configs/nuc960_defconfig diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig new file mode 100644 index 000000000000..4b2cd9eae9bc --- /dev/null +++ b/arch/arm/configs/nuc960_defconfig @@ -0,0 +1,922 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc7 +# Tue Nov 17 12:20:11 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +CONFIG_USER_NS=y +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_W90X900=y +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_CPU_NUC960=y + +# +# W90P910 Machines +# +# CONFIG_MACH_W90P910EVB is not set + +# +# NUC950 Machines +# +# CONFIG_MACH_W90P950EVB is not set + +# +# NUC960 Machines +# +CONFIG_MACH_W90N960EVB=y + +# +# NUC932 Machines +# +# CONFIG_MACH_NUC932EVB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 39986ca6bd8a8584d6bc9a52dcdf4653a905c611 Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Tue, 1 Dec 2009 14:01:55 +0100 Subject: ARM: 5842/1: add spi resource support for nuc900 add spi resource support Signed-off-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/mach-w90x900/dev.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 2a6f98de48d2..51f17b753348 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -32,6 +32,7 @@ #include #include +#include #include #include "cpu.h" @@ -196,6 +197,18 @@ static struct platform_device nuc900_device_emc = { /* SPI device */ +static struct w90p910_spi_info nuc900_spiflash_data = { + .num_cs = 1, + .lsb = 0, + .txneg = 1, + .rxneg = 0, + .divider = 24, + .sleep = 0, + .txnum = 0, + .txbitlen = 1, + .bus_num = 0, +}; + static struct resource nuc900_spi_resource[] = { [0] = { .start = W90X900_PA_I2C + SPIOFFSET, @@ -214,6 +227,9 @@ static struct platform_device nuc900_device_spi = { .id = -1, .num_resources = ARRAY_SIZE(nuc900_spi_resource), .resource = nuc900_spi_resource, + .dev = { + .platform_data = &nuc900_spiflash_data, + } }; /* spi device, spi flash info */ -- cgit v1.2.3 From 045868df2c5eee2330c052f8237b428afa9394fd Mon Sep 17 00:00:00 2001 From: wanzongshun Date: Tue, 1 Dec 2009 14:08:47 +0100 Subject: ARM: 5844/1: rename w90p910_defconfig to n uc910_defconfig rename w90p910_defconfig Signed-off-by: Wan ZongShun Signed-off-by: Russell King --- arch/arm/configs/nuc910_defconfig | 905 +++++++++++++++++++++++++++++++++++++ arch/arm/configs/w90p910_defconfig | 905 ------------------------------------- 2 files changed, 905 insertions(+), 905 deletions(-) create mode 100644 arch/arm/configs/nuc910_defconfig delete mode 100644 arch/arm/configs/w90p910_defconfig diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig new file mode 100644 index 000000000000..5245655a0ad3 --- /dev/null +++ b/arch/arm/configs/nuc910_defconfig @@ -0,0 +1,905 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30 +# Wed Jun 10 22:09:25 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +CONFIG_USER_NS=y +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +CONFIG_ARCH_W90X900=y +CONFIG_CPU_W90P910=y + +# +# W90P910 Machines +# +CONFIG_MACH_W90P910EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig deleted file mode 100644 index 5245655a0ad3..000000000000 --- a/arch/arm/configs/w90p910_defconfig +++ /dev/null @@ -1,905 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Wed Jun 10 22:09:25 2009 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -CONFIG_USER_NS=y -# CONFIG_PID_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -# CONFIG_INITRAMFS_COMPRESSION_NONE is not set -# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set -# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set -# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -# CONFIG_EMBEDDED is not set -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_COMPAT_BRK=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_SLOW_WORK is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -CONFIG_BLK_DEV_BSG=y -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -CONFIG_ARCH_W90X900=y -CONFIG_CPU_W90P910=y - -# -# W90P910 Machines -# -CONFIG_MACH_W90P910EVB=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_COMMON_CLKDEV=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_HIGHMEM is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPU Power Management -# -# CONFIG_CPU_IDLE is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_HAVE_AOUT=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_NET is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_NOP_USB_XCEIV is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -CONFIG_ROMFS_FS=y -CONFIG_ROMFS_BACKED_BY_BLOCK=y -# CONFIG_ROMFS_BACKED_BY_MTD is not set -# CONFIG_ROMFS_BACKED_BY_BOTH is not set -CONFIG_ROMFS_ON_BLOCK=y -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_STACKTRACE=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_LATENCYTOP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_RING_BUFFER=y -CONFIG_TRACING=y -CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -CONFIG_BLK_DEV_IO_TRACE=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_ARM_UNWIND=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -- cgit v1.2.3 From c5d6c7708c3e58015b2e4e13e6cea02c8567a94e Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 1 Dec 2009 14:00:51 +0100 Subject: ARM: 5841/1: a driver for on-chip ETM and ETB This driver implements support for on-chip Embedded Tracing Macrocell and Embedded Trace Buffer. It allows to trigger tracing of kernel execution flow and exporting trace output to userspace via character device and a sysrq combo. Trace output can then be decoded by a fairly simple open source tool [1] which is already sufficient to get the idea of what the kernel is doing. [1]: http://github.com/virtuoso/etm2human Signed-off-by: Alexander Shishkin Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 8 + arch/arm/include/asm/hardware/coresight.h | 165 ++++++++ arch/arm/kernel/Makefile | 2 + arch/arm/kernel/etm.c | 641 ++++++++++++++++++++++++++++++ 4 files changed, 816 insertions(+) create mode 100644 arch/arm/include/asm/hardware/coresight.h create mode 100644 arch/arm/kernel/etm.c diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 1a6f70e52921..ff54c23d085e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -83,6 +83,14 @@ config DEBUG_ICEDCC It does include a timeout to ensure that the system does not totally freeze when there is nothing connected to read. +config OC_ETM + bool "On-chip ETM and ETB" + select ARM_AMBA + help + Enables the on-chip embedded trace macrocell and embedded trace + buffer driver that will allow you to collect traces of the + kernel code. + config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on DEBUG_LL && FOOTBRIDGE diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h new file mode 100644 index 000000000000..f82b25d4f73e --- /dev/null +++ b/arch/arm/include/asm/hardware/coresight.h @@ -0,0 +1,165 @@ +/* + * linux/arch/arm/include/asm/hardware/coresight.h + * + * CoreSight components' registers + * + * Copyright (C) 2009 Nokia Corporation. + * Alexander Shishkin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_HARDWARE_CORESIGHT_H +#define __ASM_HARDWARE_CORESIGHT_H + +#define TRACER_ACCESSED_BIT 0 +#define TRACER_RUNNING_BIT 1 +#define TRACER_CYCLE_ACC_BIT 2 +#define TRACER_ACCESSED BIT(TRACER_ACCESSED_BIT) +#define TRACER_RUNNING BIT(TRACER_RUNNING_BIT) +#define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT) + +struct tracectx { + unsigned int etb_bufsz; + void __iomem *etb_regs; + void __iomem *etm_regs; + unsigned long flags; + int ncmppairs; + int etm_portsz; + struct device *dev; + struct clk *emu_clk; + struct mutex mutex; +}; + +#define TRACER_TIMEOUT 10000 + +#define etm_writel(t, v, x) \ + (__raw_writel((v), (t)->etm_regs + (x))) +#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x))) + +/* CoreSight Management Registers */ +#define CSMR_LOCKACCESS 0xfb0 +#define CSMR_LOCKSTATUS 0xfb4 +#define CSMR_AUTHSTATUS 0xfb8 +#define CSMR_DEVID 0xfc8 +#define CSMR_DEVTYPE 0xfcc +/* CoreSight Component Registers */ +#define CSCR_CLASS 0xff4 + +#define CSCR_PRSR 0x314 + +#define UNLOCK_MAGIC 0xc5acce55 + +/* ETM control register, "ETM Architecture", 3.3.1 */ +#define ETMR_CTRL 0 +#define ETMCTRL_POWERDOWN 1 +#define ETMCTRL_PROGRAM (1 << 10) +#define ETMCTRL_PORTSEL (1 << 11) +#define ETMCTRL_DO_CONTEXTID (3 << 14) +#define ETMCTRL_PORTMASK1 (7 << 4) +#define ETMCTRL_PORTMASK2 (1 << 21) +#define ETMCTRL_PORTMASK (ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2) +#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21) +#define ETMCTRL_DO_CPRT (1 << 1) +#define ETMCTRL_DATAMASK (3 << 2) +#define ETMCTRL_DATA_DO_DATA (1 << 2) +#define ETMCTRL_DATA_DO_ADDR (1 << 3) +#define ETMCTRL_DATA_DO_BOTH (ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR) +#define ETMCTRL_BRANCH_OUTPUT (1 << 8) +#define ETMCTRL_CYCLEACCURATE (1 << 12) + +/* ETM configuration code register */ +#define ETMR_CONFCODE (0x04) + +/* ETM trace start/stop resource control register */ +#define ETMR_TRACESSCTRL (0x18) + +/* ETM trigger event register */ +#define ETMR_TRIGEVT (0x08) + +/* address access type register bits, "ETM architecture", + * table 3-27 */ +/* - access type */ +#define ETMAAT_IFETCH 0 +#define ETMAAT_IEXEC 1 +#define ETMAAT_IEXECPASS 2 +#define ETMAAT_IEXECFAIL 3 +#define ETMAAT_DLOADSTORE 4 +#define ETMAAT_DLOAD 5 +#define ETMAAT_DSTORE 6 +/* - comparison access size */ +#define ETMAAT_JAVA (0 << 3) +#define ETMAAT_THUMB (1 << 3) +#define ETMAAT_ARM (3 << 3) +/* - data value comparison control */ +#define ETMAAT_NOVALCMP (0 << 5) +#define ETMAAT_VALMATCH (1 << 5) +#define ETMAAT_VALNOMATCH (3 << 5) +/* - exact match */ +#define ETMAAT_EXACTMATCH (1 << 7) +/* - context id comparator control */ +#define ETMAAT_IGNCONTEXTID (0 << 8) +#define ETMAAT_VALUE1 (1 << 8) +#define ETMAAT_VALUE2 (2 << 8) +#define ETMAAT_VALUE3 (3 << 8) +/* - security level control */ +#define ETMAAT_IGNSECURITY (0 << 10) +#define ETMAAT_NSONLY (1 << 10) +#define ETMAAT_SONLY (2 << 10) + +#define ETMR_COMP_VAL(x) (0x40 + (x) * 4) +#define ETMR_COMP_ACC_TYPE(x) (0x80 + (x) * 4) + +/* ETM status register, "ETM Architecture", 3.3.2 */ +#define ETMR_STATUS (0x10) +#define ETMST_OVERFLOW (1 << 0) +#define ETMST_PROGBIT (1 << 1) +#define ETMST_STARTSTOP (1 << 2) +#define ETMST_TRIGGER (1 << 3) + +#define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT) +#define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP) +#define etm_triggered(t) (etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER) + +#define ETMR_TRACEENCTRL2 0x1c +#define ETMR_TRACEENCTRL 0x24 +#define ETMTE_INCLEXCL (1 << 24) +#define ETMR_TRACEENEVT 0x20 +#define ETMCTRL_OPTS (ETMCTRL_DO_CPRT | \ + ETMCTRL_DATA_DO_ADDR | \ + ETMCTRL_BRANCH_OUTPUT | \ + ETMCTRL_DO_CONTEXTID) + +/* ETB registers, "CoreSight Components TRM", 9.3 */ +#define ETBR_DEPTH 0x04 +#define ETBR_STATUS 0x0c +#define ETBR_READMEM 0x10 +#define ETBR_READADDR 0x14 +#define ETBR_WRITEADDR 0x18 +#define ETBR_TRIGGERCOUNT 0x1c +#define ETBR_CTRL 0x20 +#define ETBR_FORMATTERCTRL 0x304 +#define ETBFF_ENFTC 1 +#define ETBFF_ENFCONT (1 << 1) +#define ETBFF_FONFLIN (1 << 4) +#define ETBFF_MANUAL_FLUSH (1 << 6) +#define ETBFF_TRIGIN (1 << 8) +#define ETBFF_TRIGEVT (1 << 9) +#define ETBFF_TRIGFL (1 << 10) + +#define etb_writel(t, v, x) \ + (__raw_writel((v), (t)->etb_regs + (x))) +#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x))) + +#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0) +#define etm_unlock(t) \ + do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + +#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0) +#define etb_unlock(t) \ + do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + +#endif /* __ASM_HARDWARE_CORESIGHT_H */ + diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 79087dd6d869..e7ccf7e697ce 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -17,6 +17,8 @@ obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o return_address.o setup.o signal.o \ sys_arm.o stacktrace.o time.o traps.o +obj-$(CONFIG_OC_ETM) += etm.o + obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c new file mode 100644 index 000000000000..827753966301 --- /dev/null +++ b/arch/arm/kernel/etm.c @@ -0,0 +1,641 @@ +/* + * linux/arch/arm/kernel/etm.c + * + * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer. + * + * Copyright (C) 2009 Nokia Corporation. + * Alexander Shishkin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shishkin"); + +static struct tracectx tracer; + +static inline bool trace_isrunning(struct tracectx *t) +{ + return !!(t->flags & TRACER_RUNNING); +} + +static int etm_setup_address_range(struct tracectx *t, int n, + unsigned long start, unsigned long end, int exclude, int data) +{ + u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_NSONLY | \ + ETMAAT_NOVALCMP; + + if (n < 1 || n > t->ncmppairs) + return -EINVAL; + + /* comparators and ranges are numbered starting with 1 as opposed + * to bits in a word */ + n--; + + if (data) + flags |= ETMAAT_DLOADSTORE; + else + flags |= ETMAAT_IEXEC; + + /* first comparator for the range */ + etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2)); + etm_writel(t, start, ETMR_COMP_VAL(n * 2)); + + /* second comparator is right next to it */ + etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1)); + etm_writel(t, end, ETMR_COMP_VAL(n * 2 + 1)); + + flags = exclude ? ETMTE_INCLEXCL : 0; + etm_writel(t, flags | (1 << n), ETMR_TRACEENCTRL); + + return 0; +} + +static int trace_start(struct tracectx *t) +{ + u32 v; + unsigned long timeout = TRACER_TIMEOUT; + + etb_unlock(t); + + etb_writel(t, 0, ETBR_FORMATTERCTRL); + etb_writel(t, 1, ETBR_CTRL); + + etb_lock(t); + + /* configure etm */ + v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz); + + if (t->flags & TRACER_CYCLE_ACC) + v |= ETMCTRL_CYCLEACCURATE; + + etm_unlock(t); + + etm_writel(t, v, ETMR_CTRL); + + while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for progbit to assert timed out\n"); + etm_lock(t); + return -EFAULT; + } + + etm_setup_address_range(t, 1, (unsigned long)_stext, + (unsigned long)_etext, 0, 0); + etm_writel(t, 0, ETMR_TRACEENCTRL2); + etm_writel(t, 0, ETMR_TRACESSCTRL); + etm_writel(t, 0x6f, ETMR_TRACEENEVT); + + v &= ~ETMCTRL_PROGRAM; + v |= ETMCTRL_PORTSEL; + + etm_writel(t, v, ETMR_CTRL); + + timeout = TRACER_TIMEOUT; + while (etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n"); + etm_lock(t); + return -EFAULT; + } + + etm_lock(t); + + t->flags |= TRACER_RUNNING; + + return 0; +} + +static int trace_stop(struct tracectx *t) +{ + unsigned long timeout = TRACER_TIMEOUT; + + etm_unlock(t); + + etm_writel(t, 0x440, ETMR_CTRL); + while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for progbit to assert timed out\n"); + etm_lock(t); + return -EFAULT; + } + + etm_lock(t); + + etb_unlock(t); + etb_writel(t, ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL); + + timeout = TRACER_TIMEOUT; + while (etb_readl(t, ETBR_FORMATTERCTRL) & + ETBFF_MANUAL_FLUSH && --timeout) + ; + if (!timeout) { + dev_dbg(t->dev, "Waiting for formatter flush to commence " + "timed out\n"); + etb_lock(t); + return -EFAULT; + } + + etb_writel(t, 0, ETBR_CTRL); + + etb_lock(t); + + t->flags &= ~TRACER_RUNNING; + + return 0; +} + +static int etb_getdatalen(struct tracectx *t) +{ + u32 v; + int rp, wp; + + v = etb_readl(t, ETBR_STATUS); + + if (v & 1) + return t->etb_bufsz; + + rp = etb_readl(t, ETBR_READADDR); + wp = etb_readl(t, ETBR_WRITEADDR); + + if (rp > wp) { + etb_writel(t, 0, ETBR_READADDR); + etb_writel(t, 0, ETBR_WRITEADDR); + + return 0; + } + + return wp - rp; +} + +/* sysrq+v will always stop the running trace and leave it at that */ +static void etm_dump(void) +{ + struct tracectx *t = &tracer; + u32 first = 0; + int length; + + if (!t->etb_regs) { + printk(KERN_INFO "No tracing hardware found\n"); + return; + } + + if (trace_isrunning(t)) + trace_stop(t); + + etb_unlock(t); + + length = etb_getdatalen(t); + + if (length == t->etb_bufsz) + first = etb_readl(t, ETBR_WRITEADDR); + + etb_writel(t, first, ETBR_READADDR); + + printk(KERN_INFO "Trace buffer contents length: %d\n", length); + printk(KERN_INFO "--- ETB buffer begin ---\n"); + for (; length; length--) + printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM))); + printk(KERN_INFO "\n--- ETB buffer end ---\n"); + + /* deassert the overflow bit */ + etb_writel(t, 1, ETBR_CTRL); + etb_writel(t, 0, ETBR_CTRL); + + etb_writel(t, 0, ETBR_TRIGGERCOUNT); + etb_writel(t, 0, ETBR_READADDR); + etb_writel(t, 0, ETBR_WRITEADDR); + + etb_lock(t); +} + +static void sysrq_etm_dump(int key, struct tty_struct *tty) +{ + dev_dbg(tracer.dev, "Dumping ETB buffer\n"); + etm_dump(); +} + +static struct sysrq_key_op sysrq_etm_op = { + .handler = sysrq_etm_dump, + .help_msg = "ETM buffer dump", + .action_msg = "etm", +}; + +static int etb_open(struct inode *inode, struct file *file) +{ + if (!tracer.etb_regs) + return -ENODEV; + + file->private_data = &tracer; + + return nonseekable_open(inode, file); +} + +static ssize_t etb_read(struct file *file, char __user *data, + size_t len, loff_t *ppos) +{ + int total, i; + long length; + struct tracectx *t = file->private_data; + u32 first = 0; + u32 *buf; + + mutex_lock(&t->mutex); + + if (trace_isrunning(t)) { + length = 0; + goto out; + } + + etb_unlock(t); + + total = etb_getdatalen(t); + if (total == t->etb_bufsz) + first = etb_readl(t, ETBR_WRITEADDR); + + etb_writel(t, first, ETBR_READADDR); + + length = min(total * 4, (int)len); + buf = vmalloc(length); + + dev_dbg(t->dev, "ETB buffer length: %d\n", total); + dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS)); + for (i = 0; i < length / 4; i++) + buf[i] = etb_readl(t, ETBR_READMEM); + + /* the only way to deassert overflow bit in ETB status is this */ + etb_writel(t, 1, ETBR_CTRL); + etb_writel(t, 0, ETBR_CTRL); + + etb_writel(t, 0, ETBR_WRITEADDR); + etb_writel(t, 0, ETBR_READADDR); + etb_writel(t, 0, ETBR_TRIGGERCOUNT); + + etb_lock(t); + + length -= copy_to_user(data, buf, length); + vfree(buf); + +out: + mutex_unlock(&t->mutex); + + return length; +} + +static int etb_release(struct inode *inode, struct file *file) +{ + /* there's nothing to do here, actually */ + return 0; +} + +static const struct file_operations etb_fops = { + .owner = THIS_MODULE, + .read = etb_read, + .open = etb_open, + .release = etb_release, +}; + +static struct miscdevice etb_miscdev = { + .name = "tracebuf", + .minor = 0, + .fops = &etb_fops, +}; + +static int __init etb_probe(struct amba_device *dev, struct amba_id *id) +{ + struct tracectx *t = &tracer; + int ret = 0; + + ret = amba_request_regions(dev, NULL); + if (ret) + goto out; + + t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res)); + if (!t->etb_regs) { + ret = -ENOMEM; + goto out_release; + } + + amba_set_drvdata(dev, t); + + etb_miscdev.parent = &dev->dev; + + ret = misc_register(&etb_miscdev); + if (ret) + goto out_unmap; + + t->emu_clk = clk_get(&dev->dev, "emu_src_ck"); + if (IS_ERR(t->emu_clk)) { + dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n"); + return -EFAULT; + } + + clk_enable(t->emu_clk); + + etb_unlock(t); + t->etb_bufsz = etb_readl(t, ETBR_DEPTH); + dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz); + + /* make sure trace capture is disabled */ + etb_writel(t, 0, ETBR_CTRL); + etb_writel(t, 0x1000, ETBR_FORMATTERCTRL); + etb_lock(t); + + dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n"); + +out: + return ret; + +out_unmap: + amba_set_drvdata(dev, NULL); + iounmap(t->etb_regs); + +out_release: + amba_release_regions(dev); + + return ret; +} + +static int etb_remove(struct amba_device *dev) +{ + struct tracectx *t = amba_get_drvdata(dev); + + amba_set_drvdata(dev, NULL); + + iounmap(t->etb_regs); + t->etb_regs = NULL; + + clk_disable(t->emu_clk); + clk_put(t->emu_clk); + + amba_release_regions(dev); + + return 0; +} + +static struct amba_id etb_ids[] = { + { + .id = 0x0003b907, + .mask = 0x0007ffff, + }, + { 0, 0 }, +}; + +static struct amba_driver etb_driver = { + .drv = { + .name = "etb", + .owner = THIS_MODULE, + }, + .probe = etb_probe, + .remove = etb_remove, + .id_table = etb_ids, +}; + +/* use a sysfs file "trace_running" to start/stop tracing */ +static ssize_t trace_running_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%x\n", trace_isrunning(&tracer)); +} + +static ssize_t trace_running_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned int value; + int ret; + + if (sscanf(buf, "%u", &value) != 1) + return -EINVAL; + + mutex_lock(&tracer.mutex); + ret = value ? trace_start(&tracer) : trace_stop(&tracer); + mutex_unlock(&tracer.mutex); + + return ret ? : n; +} + +static struct kobj_attribute trace_running_attr = + __ATTR(trace_running, 0644, trace_running_show, trace_running_store); + +static ssize_t trace_info_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st; + int datalen; + + etb_unlock(&tracer); + datalen = etb_getdatalen(&tracer); + etb_wa = etb_readl(&tracer, ETBR_WRITEADDR); + etb_ra = etb_readl(&tracer, ETBR_READADDR); + etb_st = etb_readl(&tracer, ETBR_STATUS); + etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL); + etb_lock(&tracer); + + etm_unlock(&tracer); + etm_ctrl = etm_readl(&tracer, ETMR_CTRL); + etm_st = etm_readl(&tracer, ETMR_STATUS); + etm_lock(&tracer); + + return sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n" + "ETBR_WRITEADDR:\t%08x\n" + "ETBR_READADDR:\t%08x\n" + "ETBR_STATUS:\t%08x\n" + "ETBR_FORMATTERCTRL:\t%08x\n" + "ETMR_CTRL:\t%08x\n" + "ETMR_STATUS:\t%08x\n", + datalen, + tracer.ncmppairs, + etb_wa, + etb_ra, + etb_st, + etb_fc, + etm_ctrl, + etm_st + ); +} + +static struct kobj_attribute trace_info_attr = + __ATTR(trace_info, 0444, trace_info_show, NULL); + +static ssize_t trace_mode_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d %d\n", + !!(tracer.flags & TRACER_CYCLE_ACC), + tracer.etm_portsz); +} + +static ssize_t trace_mode_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned int cycacc, portsz; + + if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2) + return -EINVAL; + + mutex_lock(&tracer.mutex); + if (cycacc) + tracer.flags |= TRACER_CYCLE_ACC; + else + tracer.flags &= ~TRACER_CYCLE_ACC; + + tracer.etm_portsz = portsz & 0x0f; + mutex_unlock(&tracer.mutex); + + return n; +} + +static struct kobj_attribute trace_mode_attr = + __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store); + +static int __init etm_probe(struct amba_device *dev, struct amba_id *id) +{ + struct tracectx *t = &tracer; + int ret = 0; + + if (t->etm_regs) { + dev_dbg(&dev->dev, "ETM already initialized\n"); + ret = -EBUSY; + goto out; + } + + ret = amba_request_regions(dev, NULL); + if (ret) + goto out; + + t->etm_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res)); + if (!t->etm_regs) { + ret = -ENOMEM; + goto out_release; + } + + amba_set_drvdata(dev, t); + + mutex_init(&t->mutex); + t->dev = &dev->dev; + t->flags = TRACER_CYCLE_ACC; + t->etm_portsz = 1; + + etm_unlock(t); + ret = etm_readl(t, CSCR_PRSR); + + t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf; + etm_writel(t, 0x440, ETMR_CTRL); + etm_lock(t); + + ret = sysfs_create_file(&dev->dev.kobj, + &trace_running_attr.attr); + if (ret) + goto out_unmap; + + /* failing to create any of these two is not fatal */ + ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr); + if (ret) + dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n"); + + ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr); + if (ret) + dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n"); + + dev_dbg(t->dev, "ETM AMBA driver initialized.\n"); + +out: + return ret; + +out_unmap: + amba_set_drvdata(dev, NULL); + iounmap(t->etm_regs); + +out_release: + amba_release_regions(dev); + + return ret; +} + +static int etm_remove(struct amba_device *dev) +{ + struct tracectx *t = amba_get_drvdata(dev); + + amba_set_drvdata(dev, NULL); + + iounmap(t->etm_regs); + t->etm_regs = NULL; + + amba_release_regions(dev); + + sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr); + sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr); + sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr); + + return 0; +} + +static struct amba_id etm_ids[] = { + { + .id = 0x0003b921, + .mask = 0x0007ffff, + }, + { 0, 0 }, +}; + +static struct amba_driver etm_driver = { + .drv = { + .name = "etm", + .owner = THIS_MODULE, + }, + .probe = etm_probe, + .remove = etm_remove, + .id_table = etm_ids, +}; + +static int __init etm_init(void) +{ + int retval; + + retval = amba_driver_register(&etb_driver); + if (retval) { + printk(KERN_ERR "Failed to register etb\n"); + return retval; + } + + retval = amba_driver_register(&etm_driver); + if (retval) { + amba_driver_unregister(&etb_driver); + printk(KERN_ERR "Failed to probe etm\n"); + return retval; + } + + /* not being able to install this handler is not fatal */ + (void)register_sysrq_key('v', &sysrq_etm_op); + + return 0; +} + +device_initcall(etm_init); + -- cgit v1.2.3 From 183bd50f4fe6cd49c1790a90163e3d1ece80f344 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 1 Dec 2009 14:03:31 +0100 Subject: ARM: 5843/1: OMAP3: add AMBA devices for ETM and ETB This enables on-chip tracing components found in omap3xxx. Signed-off-by: Alexander Shishkin Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap2/Kconfig | 8 +++++ arch/arm/mach-omap2/Makefile | 3 ++ arch/arm/mach-omap2/clock34xx.c | 8 ++--- arch/arm/mach-omap2/emu.c | 66 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 81 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-omap2/emu.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index aad194f61a33..6f1bbbc4d15f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -100,3 +100,11 @@ config MACH_OMAP_ZOOM2 config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 + +config OMAP3_EMU + bool "OMAP3 debugging peripherals" + depends on ARCH_OMAP3 + select OC_ETM + help + Say Y here to enable debugging hardware of omap3 + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8cb16777661a..e141cabcfcce 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -44,6 +44,9 @@ obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +# EMU peripherals +obj-$(CONFIG_OMAP3_EMU) += emu.o + iommu-y += iommu2.o iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 7c5c00df3c70..066e88a18824 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -119,7 +119,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), - CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), @@ -138,7 +138,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), - CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), @@ -147,7 +147,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), CLK(NULL, "arm_fck", &arm_fck, CK_343X), - CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), CLK(NULL, "l3_ick", &l3_ick, CK_343X), @@ -302,7 +302,7 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), - CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X), + CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c new file mode 100644 index 000000000000..ec0d984a26fc --- /dev/null +++ b/arch/arm/mach-omap2/emu.c @@ -0,0 +1,66 @@ +/* + * emu.c + * + * ETM and ETB CoreSight components' resources as found in OMAP3xxx. + * + * Copyright (C) 2009 Nokia Corporation. + * Alexander Shishkin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shishkin"); + +/* Cortex CoreSight components within omap3xxx EMU */ +#define ETM_BASE (L4_EMU_34XX_PHYS + 0x10000) +#define DBG_BASE (L4_EMU_34XX_PHYS + 0x11000) +#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000) +#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000) + +static struct amba_device omap3_etb_device = { + .dev = { + .init_name = "etb", + }, + .res = { + .start = ETB_BASE, + .end = ETB_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .periphid = 0x000bb907, +}; + +static struct amba_device omap3_etm_device = { + .dev = { + .init_name = "etm", + }, + .res = { + .start = ETM_BASE, + .end = ETM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .periphid = 0x102bb921, +}; + +static int __init emu_init(void) +{ + amba_device_register(&omap3_etb_device, &iomem_resource); + amba_device_register(&omap3_etm_device, &iomem_resource); + + return 0; +} + +subsys_initcall(emu_init); + -- cgit v1.2.3