From 6079a463cf95fafcc704a4e5e92a4da12444bd3c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 27 May 2008 06:22:38 -0700 Subject: dccp: Fix to handle short sequence numbers packet correctly RFC4340 said: 8.5. Pseudocode ... If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet has short sequence numbers), drop packet and return But DCCP has some mistake to handle short sequence numbers packet, now it drop packet only if P.type is Data, Ack, or DataAck and P.X == 0. Signed-off-by: Wei Yongjun Acked-by: Gerrit Renker Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/dccp/ipv4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index b348dd70c685..c22a3780c14e 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -739,8 +739,8 @@ int dccp_invalid_packet(struct sk_buff *skb) * If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet * has short sequence numbers), drop packet and return */ - if (dh->dccph_type >= DCCP_PKT_DATA && - dh->dccph_type <= DCCP_PKT_DATAACK && dh->dccph_x == 0) { + if ((dh->dccph_type < DCCP_PKT_DATA || + dh->dccph_type > DCCP_PKT_DATAACK) && dh->dccph_x == 0) { DCCP_WARN("P.type (%s) not Data || [Data]Ack, while P.X == 0\n", dccp_packet_name(dh->dccph_type)); return 1; -- cgit v1.2.3 From 825de27d9e40b3117b29a79d412b7a4b78c5d815 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 27 May 2008 06:33:54 -0700 Subject: dccp ccid-3: Fix "t_ipi explosion" bug The identification of this bug is thanks to Cheng Wei and Tomasz Grobelny. To avoid divide-by-zero, the implementation previously ignored RTTs smaller than 4 microseconds when performing integer division RTT/4. When the RTT reached a value less than 4 microseconds (as observed on loopback), this prevented the Window Counter CCVal value from advancing. As a result, the receiver stopped sending feedback. This in turn caused non-ending expiries of the nofeedback timer at the sender, so that the sending rate was progressively reduced until reaching the minimum of one packet per 64 seconds. The patch fixes this bug by handling integer division more intelligently. Due to consistent use of dccp_sample_rtt(), divide-by-zero-RTT is avoided. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller --- net/dccp/ccids/ccid3.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index cd61dea2eea1..f813077234b7 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -193,22 +193,17 @@ static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hctx, int len) /* * Update Window Counter using the algorithm from [RFC 4342, 8.1]. - * The algorithm is not applicable if RTT < 4 microseconds. + * As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt(). */ static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx, ktime_t now) { - u32 quarter_rtts; - - if (unlikely(hctx->ccid3hctx_rtt < 4)) /* avoid divide-by-zero */ - return; - - quarter_rtts = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count); - quarter_rtts /= hctx->ccid3hctx_rtt / 4; + u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count), + quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt; if (quarter_rtts > 0) { hctx->ccid3hctx_t_last_win_count = now; - hctx->ccid3hctx_last_win_count += min_t(u32, quarter_rtts, 5); + hctx->ccid3hctx_last_win_count += min(quarter_rtts, 5U); hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */ } } -- cgit v1.2.3 From 6f6c218f68e632e4596cae6e6d43658d26a5e0fe Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 27 May 2008 17:01:55 -0400 Subject: rtl8180: avoid NULL dereference in max2820_rf_set_channel The static function max2820_rf_set_channel is called with conf == NULL within its compilation unit. Originally this defaulted to b/g channel 1, but "cfg80211 API for channels/bitrates, mac80211 and driver conversion" (commit 8318d78a44d49ac1edf2bdec7299de3617c4232e) mistakenly dropped this check. This patch minimally restores the expected behavior. Reported-by: Colin Lai Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_max2820.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c index a34dfd382b6d..a140c802264a 100644 --- a/drivers/net/wireless/rtl8180_max2820.c +++ b/drivers/net/wireless/rtl8180_max2820.c @@ -78,7 +78,8 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct rtl8180_priv *priv = dev->priv; - int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + int channel = conf ? + ieee80211_frequency_to_channel(conf->channel->center_freq) : 1; unsigned int chan_idx = channel - 1; u32 txpw = priv->channels[chan_idx].hw_value & 0xFF; u32 chan = max2820_chan[chan_idx]; -- cgit v1.2.3 From 0823b2c3c10a4db21cd39a8c72cda96b4dd6d914 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:30:12 +0200 Subject: rtl8180: fix wrong parameter in sa2400_rf_set_channel The sa2400 RF code needs to invoke sa2400_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_sa2400.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c index 0311b4ea124c..cea4e0ccb92d 100644 --- a/drivers/net/wireless/rtl8180_sa2400.c +++ b/drivers/net/wireless/rtl8180_sa2400.c @@ -86,7 +86,7 @@ static void sa2400_rf_set_channel(struct ieee80211_hw *dev, write_sa2400(dev, 7, txpw); - sa2400_write_phy_antenna(dev, chan); + sa2400_write_phy_antenna(dev, channel); write_sa2400(dev, 0, chan); write_sa2400(dev, 1, 0xbb50); -- cgit v1.2.3 From 0a0ab41e833c8184c6d4ab663f137d5bbd50e049 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:32:34 +0200 Subject: rtl8180: fix wrong parameter in max2820_rf_set_channel The max2820 RF code needs to invoke max2820_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_max2820.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c index a140c802264a..6c825fd7f3b6 100644 --- a/drivers/net/wireless/rtl8180_max2820.c +++ b/drivers/net/wireless/rtl8180_max2820.c @@ -88,7 +88,7 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, * sa2400, for MAXIM we do this directly from BB */ rtl8180_write_phy(dev, 3, txpw); - max2820_write_phy_antenna(dev, chan); + max2820_write_phy_antenna(dev, channel); write_max2820(dev, 3, chan); } -- cgit v1.2.3 From bc1b1fb2753873314ad1bf56bc7d5b8dd447cd2a Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:34:16 +0200 Subject: rtl8180: fix wrong parameter in grf5101_rf_set_channel The grf5101 RF code needs to invoke grf5101_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8180_grf5101.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c index 5d47935dbac3..947ee55f18b2 100644 --- a/drivers/net/wireless/rtl8180_grf5101.c +++ b/drivers/net/wireless/rtl8180_grf5101.c @@ -88,7 +88,7 @@ static void grf5101_rf_set_channel(struct ieee80211_hw *dev, write_grf5101(dev, 0x0B, chan); write_grf5101(dev, 0x07, 0x1000); - grf5101_write_phy_antenna(dev, chan); + grf5101_write_phy_antenna(dev, channel); } static void grf5101_rf_stop(struct ieee80211_hw *dev) -- cgit v1.2.3 From 6b4bec010d888c5b8c731aa596635cd83dd3416c Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 20 May 2008 12:16:28 +0200 Subject: b43: Upload both beacon templates on initial load This updates the beacon template code to upload both templates, if we never uploaded one before. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/b43.h | 1 + drivers/net/wireless/b43/main.c | 58 +++++++++++++++++++++++++++++++---------- 2 files changed, 45 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 37783cdd301a..dfa4bdd5597c 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -737,6 +737,7 @@ struct b43_wl { struct ieee80211_tx_control beacon_txctl; bool beacon0_uploaded; bool beacon1_uploaded; + bool beacon_templates_virgin; /* Never wrote the templates? */ struct work_struct beacon_update_trigger; /* The current QOS parameters for the 4 queues. diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 8fdba9415c04..b8e77751065a 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1544,6 +1544,30 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev, kfree(probe_resp_data); } +static void b43_upload_beacon0(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + + if (wl->beacon0_uploaded) + return; + b43_write_beacon_template(dev, 0x68, 0x18); + /* FIXME: Probe resp upload doesn't really belong here, + * but we don't use that feature anyway. */ + b43_write_probe_resp_template(dev, 0x268, 0x4A, + &__b43_ratetable[3]); + wl->beacon0_uploaded = 1; +} + +static void b43_upload_beacon1(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + + if (wl->beacon1_uploaded) + return; + b43_write_beacon_template(dev, 0x468, 0x1A); + wl->beacon1_uploaded = 1; +} + static void handle_irq_beacon(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; @@ -1568,24 +1592,27 @@ static void handle_irq_beacon(struct b43_wldev *dev) return; } - if (!beacon0_valid) { - if (!wl->beacon0_uploaded) { - b43_write_beacon_template(dev, 0x68, 0x18); - b43_write_probe_resp_template(dev, 0x268, 0x4A, - &__b43_ratetable[3]); - wl->beacon0_uploaded = 1; - } + if (unlikely(wl->beacon_templates_virgin)) { + /* We never uploaded a beacon before. + * Upload both templates now, but only mark one valid. */ + wl->beacon_templates_virgin = 0; + b43_upload_beacon0(dev); + b43_upload_beacon1(dev); cmd = b43_read32(dev, B43_MMIO_MACCMD); cmd |= B43_MACCMD_BEACON0_VALID; b43_write32(dev, B43_MMIO_MACCMD, cmd); - } else if (!beacon1_valid) { - if (!wl->beacon1_uploaded) { - b43_write_beacon_template(dev, 0x468, 0x1A); - wl->beacon1_uploaded = 1; + } else { + if (!beacon0_valid) { + b43_upload_beacon0(dev); + cmd = b43_read32(dev, B43_MMIO_MACCMD); + cmd |= B43_MACCMD_BEACON0_VALID; + b43_write32(dev, B43_MMIO_MACCMD, cmd); + } else if (!beacon1_valid) { + b43_upload_beacon1(dev); + cmd = b43_read32(dev, B43_MMIO_MACCMD); + cmd |= B43_MACCMD_BEACON1_VALID; + b43_write32(dev, B43_MMIO_MACCMD, cmd); } - cmd = b43_read32(dev, B43_MMIO_MACCMD); - cmd |= B43_MACCMD_BEACON1_VALID; - b43_write32(dev, B43_MMIO_MACCMD, cmd); } } @@ -4073,6 +4100,9 @@ static int b43_op_start(struct ieee80211_hw *hw) wl->filter_flags = 0; wl->radiotap_enabled = 0; b43_qos_clear(wl); + wl->beacon0_uploaded = 0; + wl->beacon1_uploaded = 0; + wl->beacon_templates_virgin = 1; /* First register RFkill. * LEDs that are registered later depend on it. */ -- cgit v1.2.3 From 679fda1aa49fddf938bb699df7867c01988371ab Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Tue, 20 May 2008 18:42:54 +0200 Subject: net/mac80211: always true conditionals Correct always true conditionals. Signed-off-by: Nicolas Kaiser Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 699d97b8de5e..a9fce4afdf21 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -672,7 +672,7 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, if (params->vlan) { sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN || + if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN && sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; } else @@ -760,7 +760,7 @@ static int ieee80211_change_station(struct wiphy *wiphy, if (params->vlan && params->vlan != sta->sdata->dev) { vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN || + if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN && vlansdata->vif.type != IEEE80211_IF_TYPE_AP) { rcu_read_unlock(); return -EINVAL; -- cgit v1.2.3 From 167ad6f7a2b2ae58dfaa46620b9b3212594f38e6 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 21 May 2008 18:17:05 +0300 Subject: mac80211: fix ieee80211_rx_bss_put/get imbalance This patch fixes iee80211_rx_bss_put/get imbalance introduced by 'mac80211: enable IBSS merging' patch. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7cfd12e0d1e2..0ef5993e785b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2479,8 +2479,6 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, ifsta->state = IEEE80211_IBSS_JOINED; mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL); - ieee80211_rx_bss_put(dev, bss); - return res; } @@ -3523,6 +3521,7 @@ static int ieee80211_sta_create_ibss(struct net_device *dev, struct ieee80211_supported_band *sband; u8 bssid[ETH_ALEN], *pos; int i; + int ret; DECLARE_MAC_BUF(mac); #if 0 @@ -3567,7 +3566,9 @@ static int ieee80211_sta_create_ibss(struct net_device *dev, *pos++ = (u8) (rate / 5); } - return ieee80211_sta_join_ibss(dev, ifsta, bss); + ret = ieee80211_sta_join_ibss(dev, ifsta, bss); + ieee80211_rx_bss_put(dev, bss); + return ret; } @@ -3615,10 +3616,13 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, (bss = ieee80211_rx_bss_get(dev, bssid, local->hw.conf.channel->center_freq, ifsta->ssid, ifsta->ssid_len))) { + int ret; printk(KERN_DEBUG "%s: Selected IBSS BSSID %s" " based on configured SSID\n", dev->name, print_mac(mac, bssid)); - return ieee80211_sta_join_ibss(dev, ifsta, bss); + ret = ieee80211_sta_join_ibss(dev, ifsta, bss); + ieee80211_rx_bss_put(dev, bss); + return ret; } #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG " did not try to join ibss\n"); -- cgit v1.2.3 From 3bf0a32e22fedc0b46443699db2d61ac2a883ac4 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 22 May 2008 16:32:16 +0200 Subject: b43: Fix controller restart crash This fixes a kernel crash on rmmod, in the case where the controller was restarted before doing the rmmod. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b8e77751065a..6c3d9ea0a9f8 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4271,7 +4271,9 @@ static void b43_chip_reset(struct work_struct *work) goto out; } } - out: +out: + if (err) + wl->current_dev = NULL; /* Failed to init the dev. */ mutex_unlock(&wl->mutex); if (err) b43err(wl, "Controller restart FAILED\n"); @@ -4412,9 +4414,11 @@ static void b43_one_core_detach(struct ssb_device *dev) struct b43_wldev *wldev; struct b43_wl *wl; + /* Do not cancel ieee80211-workqueue based work here. + * See comment in b43_remove(). */ + wldev = ssb_get_drvdata(dev); wl = wldev->wl; - cancel_work_sync(&wldev->restart_work); b43_debugfs_remove_device(wldev); b43_wireless_core_detach(wldev); list_del(&wldev->list); @@ -4599,6 +4603,10 @@ static void b43_remove(struct ssb_device *dev) struct b43_wl *wl = ssb_get_devtypedata(dev); struct b43_wldev *wldev = ssb_get_drvdata(dev); + /* We must cancel any work here before unregistering from ieee80211, + * as the ieee80211 unreg will destroy the workqueue. */ + cancel_work_sync(&wldev->restart_work); + B43_WARN_ON(!wl); if (wl->current_dev == wldev) ieee80211_unregister_hw(wl->hw); -- cgit v1.2.3 From 9381be059bf5831d259e8735005cfa35b7488543 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 23 May 2008 01:36:36 +0300 Subject: mac80211: reorder channel and freq reporting in wext scan report This patch switch order of channel and freq (SIOCGIWFREQ) reports in scan results in order to overcome wpa_supplicant inability to handle channel numbers in 5.2Ghz band. Wext reporting channel number is ambiguous as channels 7-12 (802.11j) exist on both bands. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Acked-by: Dan Williams Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0ef5993e785b..c29927c4977a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4099,18 +4099,17 @@ ieee80211_sta_scan_result(struct net_device *dev, memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = bss->freq; - iwe.u.freq.e = 6; + iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq); + iwe.u.freq.e = 0; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq); - iwe.u.freq.e = 0; + iwe.u.freq.m = bss->freq; + iwe.u.freq.e = 6; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); - memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVQUAL; iwe.u.qual.qual = bss->signal; -- cgit v1.2.3 From 0f3e63a55b1a7b695a79bf3eec2ff5ab6b336037 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:41 +0200 Subject: rt2x00: Fix memleak in tx() path When the tx() handler runs while the device has disapeared, we did return NETDEV_TX_OK but didn't free the skb. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c206b5092070..87e280a21971 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -93,6 +93,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, */ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) { ieee80211_stop_queues(hw); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v1.2.3 From 2088d4174e4292aef892bb7095fc3c3ea5bd117c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:49 +0200 Subject: rt2x00: Don't count retries as failure Link quality estimation became quite low for all rt2x00 drivers because the number of retries it took to send the frame were counted as failure. This does not correspond to the legacy driver link quality calculation, by not counting it we will send somewhat more optimistic values to mac80211. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b22c02737185..e0767f0cb3d4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -507,7 +507,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * Update TX statistics. */ rt2x00dev->link.qual.tx_success += success; - rt2x00dev->link.qual.tx_failed += txdesc->retry + fail; + rt2x00dev->link.qual.tx_failed += fail; /* * Initialize TX status -- cgit v1.2.3 From f06a0f486dc8bbe8808f46b81fbfd73241529fae Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:56 +0200 Subject: rt2x00: Reset antenna RSSI after switch When the antenna configuration has changed we should reset the antenna RSSI value. Otherwise the value will be influenced by the previous configuration quality which in turn will affect the antenna diversity. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 5 +++++ drivers/net/wireless/rt2x00/rt2x00config.c | 1 + 2 files changed, 6 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 57bdc153952f..611d98320593 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -328,6 +328,11 @@ static inline int rt2x00_get_link_ant_rssi(struct link *link) return DEFAULT_RSSI; } +static inline void rt2x00_reset_link_ant_rssi(struct link *link) +{ + link->ant.rssi_ant = 0; +} + static inline int rt2x00_get_link_ant_rssi_history(struct link *link, enum antenna ant) { diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index a9930a03f450..48608e8cc8b4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -129,6 +129,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, */ rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA); rt2x00lib_reset_link_tuner(rt2x00dev); + rt2x00_reset_link_ant_rssi(&rt2x00dev->link); rt2x00dev->link.ant.active.rx = libconf.ant.rx; rt2x00dev->link.ant.active.tx = libconf.ant.tx; -- cgit v1.2.3 From 633257d3db547e7553500f05e0aa2692c876d7a5 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:14:02 +0200 Subject: rt2x00: Use atomic interface iteration in irq context rt2x00lib_beacondone() is called from interrupt context, this means we cannot use the mac80211 interface iterator that uses the rtnl lock (since that uses a mutex which can sleep). Instead we should use the atomic mac80211 interface iterator. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index e0767f0cb3d4..2673d568bcac 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -483,9 +483,9 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) return; - ieee80211_iterate_active_interfaces(rt2x00dev->hw, - rt2x00lib_beacondone_iter, - rt2x00dev); + ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw, + rt2x00lib_beacondone_iter, + rt2x00dev); queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); } -- cgit v1.2.3 From d4231ca3e162387a2b6964dacaa83604e065c4e9 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 23 May 2008 10:15:26 -0700 Subject: mac80211 : Fixes the status message for iwconfig iwconfig was showing incorrect status messages when disassociated. Patch fixes this by always checking for association status in ioctl calls for getting ap address. Signed-off-by: Abhijeet Kolekar Acked-by: Dan Williams Signed-off-by: John W. Linville --- net/mac80211/wext.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 457ebf9e85ae..8311bb24f9f3 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -489,9 +489,14 @@ static int ieee80211_ioctl_giwap(struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA || sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - ap_addr->sa_family = ARPHRD_ETHER; - memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); - return 0; + if (sdata->u.sta.state == IEEE80211_ASSOCIATED) { + ap_addr->sa_family = ARPHRD_ETHER; + memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); + return 0; + } else { + memset(&ap_addr->sa_data, 0, ETH_ALEN); + return 0; + } } else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN); -- cgit v1.2.3 From 4364623cb79d02945ace7a4faa1f11e617dde198 Mon Sep 17 00:00:00 2001 From: Scott Ashcroft Date: Tue, 27 May 2008 00:06:15 +0300 Subject: rndis_wlan: Make connections to TKIP PSK networks work This patch allows the rndis_wlan driver to connect to TKIP PSK networks. It uses the ASSOCIATION_INFORMATION RNDIS call to pull back the IEs and sends them back to userspace using wireless events. Tested on a few wireless networks I have access to. Based on the similar code in ndiswrapper. Signed-off-by: Scott Ashcroft [edit: cleanups] Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 60 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 58 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index d0b1fb15c709..ac56f8d9a5e5 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -116,6 +116,7 @@ MODULE_PARM_DESC(workaround_interval, #define OID_802_11_ENCRYPTION_STATUS ccpu2(0x0d01011b) #define OID_802_11_ADD_KEY ccpu2(0x0d01011d) #define OID_802_11_REMOVE_KEY ccpu2(0x0d01011e) +#define OID_802_11_ASSOCIATION_INFORMATION ccpu2(0x0d01011f) #define OID_802_11_PMKID ccpu2(0x0d010123) #define OID_802_11_NETWORK_TYPES_SUPPORTED ccpu2(0x0d010203) #define OID_802_11_NETWORK_TYPE_IN_USE ccpu2(0x0d010204) @@ -271,6 +272,26 @@ struct ndis_config_param { __le32 value_length; } __attribute__((packed)); +struct ndis_80211_assoc_info { + __le32 length; + __le16 req_ies; + struct req_ie { + __le16 capa; + __le16 listen_interval; + u8 cur_ap_address[6]; + } req_ie; + __le32 req_ie_length; + __le32 offset_req_ies; + __le16 resp_ies; + struct resp_ie { + __le16 capa; + __le16 status_code; + __le16 assoc_id; + } resp_ie; + __le32 resp_ie_length; + __le32 offset_resp_ies; +} __attribute__((packed)); + /* these have to match what is in wpa_supplicant */ enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP }; enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, @@ -674,6 +695,12 @@ static int get_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN]) return ret; } +static int get_association_info(struct usbnet *usbdev, + struct ndis_80211_assoc_info *info, int len) +{ + return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION, + info, &len); +} static int is_associated(struct usbnet *usbdev) { @@ -2182,11 +2209,40 @@ static void rndis_wext_worker(struct work_struct *work) struct usbnet *usbdev = priv->usbdev; union iwreq_data evt; unsigned char bssid[ETH_ALEN]; - int ret; + struct ndis_80211_assoc_info *info; + int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32; + int ret, offset; if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) { - ret = get_bssid(usbdev, bssid); + info = kzalloc(assoc_size, GFP_KERNEL); + if (!info) + goto get_bssid; + /* Get association info IEs from device and send them back to + * userspace. */ + ret = get_association_info(usbdev, info, assoc_size); + if (!ret) { + evt.data.length = le32_to_cpu(info->req_ie_length); + if (evt.data.length > 0) { + offset = le32_to_cpu(info->offset_req_ies); + wireless_send_event(usbdev->net, + IWEVASSOCREQIE, &evt, + (char *)info + offset); + } + + evt.data.length = le32_to_cpu(info->resp_ie_length); + if (evt.data.length > 0) { + offset = le32_to_cpu(info->offset_resp_ies); + wireless_send_event(usbdev->net, + IWEVASSOCRESPIE, &evt, + (char *)info + offset); + } + } + + kfree(info); + +get_bssid: + ret = get_bssid(usbdev, bssid); if (!ret) { evt.data.flags = 0; evt.data.length = 0; -- cgit v1.2.3 From 47cfd463962ab0748ecbad761ff6ef2916b54aac Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Tue, 27 May 2008 11:29:34 +0800 Subject: iwlwifi: fix exit from stay_in_table state When exiting from stay in table state (e.g. timer expiration), all the statistics are reset and the RS flow should not continue but only after enough statistics are collected again. Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index c9847b1a67f7..02c4073f5a78 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -2009,7 +2009,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, * 2) Not just finishing up a search * 3) Allowing a new search */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl) { + if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { /* Save current throughput to compare with "search" throughput*/ lq_sta->last_tpt = current_tpt; -- cgit v1.2.3 From 135a5484c3e0c6710035630b630cef3c856b78e2 Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Tue, 27 May 2008 11:29:35 +0800 Subject: iwlwifi: fix rate scale TLC column selection bug This patch fixes a case that a wrong maximal rate is selected when searching for better configurations. Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 02c4073f5a78..3a7f0cb710ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -1162,7 +1162,6 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, /* Higher rate not available, use the original */ } else { - new_rate = rate; break; } } -- cgit v1.2.3 From a7624837261b55259d4a88309fd88529643fbb80 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 27 May 2008 11:15:08 +0300 Subject: rndis_wlan: add missing range check for power_output modparam Range check for power_output were missing. Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index ac56f8d9a5e5..18c9931e3267 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2470,6 +2470,11 @@ static int bcm4320_early_init(struct usbnet *dev) else if (priv->param_power_save > 2) priv->param_power_save = 2; + if (priv->param_power_output < 0) + priv->param_power_output = 0; + else if (priv->param_power_output > 3) + priv->param_power_output = 3; + if (priv->param_roamtrigger < -80) priv->param_roamtrigger = -80; else if (priv->param_roamtrigger > -60) -- cgit v1.2.3 From f6d97104890203ba9c2cf8e34894c4c8e64cb880 Mon Sep 17 00:00:00 2001 From: Yi Zhu Date: Tue, 27 May 2008 17:50:50 +0300 Subject: mac80211: fix a typo in ieee80211_handle_filtered_frame comment fix a typo in ieee80211_handle_filtered_frame comment Signed-off-by: Yi Zhu Signed-off-by: John W. Linville --- net/mac80211/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 915afadb0602..5c876450b14c 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1313,7 +1313,7 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, /* * Clear the TX filter mask for this STA when sending the next * packet. If the STA went to power save mode, this will happen - * happen when it wakes up for the next time. + * when it wakes up for the next time. */ sta->flags |= WLAN_STA_CLEAR_PS_FILT; -- cgit v1.2.3 From 70d251b24c44ab2fcba1807a5206e844cf10eb38 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 28 May 2008 20:08:12 +0530 Subject: mac80211: Fix for NULL pointer dereference in sta_info_get() This addresses a NULL pointer dereference in sta_info_get(). TID and sta_info are extracted in ADDBA Timer expiry function through the timer handler's argument. The problem is extracging the TID (which was stored in timer_to_tid[] array of type "u8") through "int *" typecast which may also yield unwanted bytes for the MSB of TID that results in incorrect sta_info and ieee80211_local pointers. ieee80211_local pointer is NULL as illustrated below, it crashes in sta_info_get(). The problem started when extracting ieee80211_local pointer out of sta_info iteself and eventually crashed in stat_info_get(). The proper way to fix is to change the data type of TID to u8 instead of u16. However changing all the occurences requires some prototype changes as well. We should fix this in upcoming patches. Signed-off-by: Senthil Balasubramanian Signed-off-by: Luis Rodriguez Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c29927c4977a..33a356e7b66f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1614,7 +1614,7 @@ void sta_addba_resp_timer_expired(unsigned long data) * only one argument, and both sta_info and TID are needed, so init * flow in sta_info_create gives the TID as data, while the timer_to_id * array gives the sta through container_of */ - u16 tid = *(int *)data; + u16 tid = *(u8 *)data; struct sta_info *temp_sta = container_of((void *)data, struct sta_info, timer_to_tid[tid]); @@ -1662,7 +1662,7 @@ timer_expired_exit: void sta_rx_agg_session_timer_expired(unsigned long data) { /* not an elegant detour, but there is no choice as the timer passes - * only one argument, and verious sta_info are needed here, so init + * only one argument, and various sta_info are needed here, so init * flow in sta_info_create gives the TID as data, while the timer_to_id * array gives the sta through container_of */ u8 *ptid = (u8 *)data; -- cgit v1.2.3 From c97c23e38625f59e3e9869664eeeb0cab1822948 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 28 May 2008 23:15:32 +0530 Subject: mac80211: fix alignment issue with compare_ether_addr() This addresses an alignment issue with compare_ether_addr(). The addresses passed to compare_ether_addr should be two bytes aligned. It may function properly in x86 platform. However may not work properly on IA-64 or ARM processor. This also fixes a typo in mlme.c where the sk_buff struct name is incorect. Though sizeof() works for any incorrect structure pointer name as its just a pointer length that we want, lets just fix it. Signed-off-by: Senthil Balasubramanian Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 4 ++-- net/mac80211/rx.c | 4 ++-- net/mac80211/util.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 33a356e7b66f..841278f1df8e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1325,7 +1325,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, /* prepare reordering buffer */ tid_agg_rx->reorder_buf = - kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC); + kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC); if (!tid_agg_rx->reorder_buf) { if (net_ratelimit()) printk(KERN_ERR "can not allocate reordering buffer " @@ -1334,7 +1334,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, goto end; } memset(tid_agg_rx->reorder_buf, 0, - buf_size * sizeof(struct sk_buf *)); + buf_size * sizeof(struct sk_buff *)); if (local->ops->ampdu_action) ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1958bfb361c6..0941e5d6a522 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1091,7 +1091,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx) u16 fc, hdrlen, ethertype; u8 *payload; u8 dst[ETH_ALEN]; - u8 src[ETH_ALEN]; + u8 src[ETH_ALEN] __aligned(2); struct sk_buff *skb = rx->skb; struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); DECLARE_MAC_BUF(mac); @@ -1234,7 +1234,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx) */ static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx) { - static const u8 pae_group_addr[ETH_ALEN] + static const u8 pae_group_addr[ETH_ALEN] __aligned(2) = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 }; struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 131e9e6c8a32..4e97b266f907 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -34,11 +34,11 @@ void *mac80211_wiphy_privid = &mac80211_wiphy_privid; /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ -const unsigned char rfc1042_header[] = +const unsigned char rfc1042_header[] __aligned(2) = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -const unsigned char bridge_tunnel_header[] = +const unsigned char bridge_tunnel_header[] __aligned(2) = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; -- cgit v1.2.3 From 4c8411f8c115def968820a4df6658ccfd55d7f1a Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 29 May 2008 01:32:47 -0700 Subject: bluetooth: fix locking bug in the rfcomm socket cleanup handling in net/bluetooth/rfcomm/sock.c, rfcomm_sk_state_change() does the following operation: if (parent && sock_flag(sk, SOCK_ZAPPED)) { /* We have to drop DLC lock here, otherwise * rfcomm_sock_destruct() will dead lock. */ rfcomm_dlc_unlock(d); rfcomm_sock_kill(sk); rfcomm_dlc_lock(d); } } which is fine, since rfcomm_sock_kill() will call sk_free() which will call rfcomm_sock_destruct() which takes the rfcomm_dlc_lock()... so far so good. HOWEVER, this assumes that the rfcomm_sk_state_change() function always gets called with the rfcomm_dlc_lock() taken. This is the case for all but one case, and in that case where we don't have the lock, we do a double unlock followed by an attempt to take the lock, which due to underflow isn't going anywhere fast. This patch fixes this by moving the stragling case inside the lock, like the other usages of the same call are doing in this code. This was found with the help of the www.kerneloops.org project, where this deadlock was observed 51 times at this point in time: http://www.kerneloops.org/search.php?search=rfcomm_sock_destruct Signed-off-by: Arjan van de Ven Acked-by: Marcel Holtmann Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index eb62558e9b09..0c2c93735e93 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -423,8 +423,8 @@ static int __rfcomm_dlc_close(struct rfcomm_dlc *d, int err) rfcomm_dlc_lock(d); d->state = BT_CLOSED; - rfcomm_dlc_unlock(d); d->state_change(d, err); + rfcomm_dlc_unlock(d); skb_queue_purge(&d->tx_queue); rfcomm_dlc_unlink(d); -- cgit v1.2.3 From 12293bf91126ad253a25e2840b307fdc7c2754c3 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 29 May 2008 03:19:37 -0700 Subject: netfilter: nf_conntrack_expect: fix error path unwind in nf_conntrack_expect_init() Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_expect.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index e31beeb33b2b..e8f0dead267f 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -587,10 +587,10 @@ int __init nf_conntrack_expect_init(void) return 0; err3: + kmem_cache_destroy(nf_ct_expect_cachep); +err2: nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc, nf_ct_expect_hsize); -err2: - kmem_cache_destroy(nf_ct_expect_cachep); err1: return err; } -- cgit v1.2.3 From 3446b9d57edd0b96a89715fef222879e4919a115 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 30 May 2008 02:57:29 -0700 Subject: llc: Fix double accounting of received packets llc_sap_rcv was being preceded by skb_set_owner_r, then calling llc_state_process that calls sock_queue_rcv_skb, that in turn calls skb_set_owner_r again making the space allowed to be used by the socket to be leaked, making the socket to get stuck. Fix it by setting skb->sk at llc_sap_rcv and leave the accounting to be done only at sock_queue_rcv_skb. Reported-by: Dmitry Petukhov Tested-by: Dmitry Petukhov Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/llc/llc_sap.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c index e2ddde755019..008de1fc42ca 100644 --- a/net/llc/llc_sap.c +++ b/net/llc/llc_sap.c @@ -286,12 +286,14 @@ void llc_build_and_send_xid_pkt(struct llc_sap *sap, struct sk_buff *skb, * * Sends received pdus to the sap state machine. */ -static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb) +static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb, + struct sock *sk) { struct llc_sap_state_ev *ev = llc_sap_ev(skb); ev->type = LLC_SAP_EV_TYPE_PDU; ev->reason = 0; + skb->sk = sk; llc_sap_state_process(sap, skb); } @@ -360,8 +362,7 @@ static void llc_sap_mcast(struct llc_sap *sap, break; sock_hold(sk); - skb_set_owner_r(skb1, sk); - llc_sap_rcv(sap, skb1); + llc_sap_rcv(sap, skb1, sk); sock_put(sk); } read_unlock_bh(&sap->sk_list.lock); @@ -381,8 +382,7 @@ void llc_sap_handler(struct llc_sap *sap, struct sk_buff *skb) } else { struct sock *sk = llc_lookup_dgram(sap, &laddr); if (sk) { - skb_set_owner_r(skb, sk); - llc_sap_rcv(sap, skb); + llc_sap_rcv(sap, skb, sk); sock_put(sk); } else kfree_skb(skb); -- cgit v1.2.3