summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2022-08-25selftests: forwarding: Fix failing tests with old libnetIdo Schimmel
commit 8bcfb4ae4d970b9a9724ddfbac26c387934e0e94 upstream. The custom multipath hash tests use mausezahn in order to test how changes in various packet fields affect the packet distribution across the available nexthops. The tool uses the libnet library for various low-level packet construction and injection. The library started using the "SO_BINDTODEVICE" socket option for IPv6 sockets in version 1.1.6 and for IPv4 sockets in version 1.2. When the option is not set, packets are not routed according to the table associated with the VRF master device and tests fail. Fix this by prefixing the command with "ip vrf exec", which will cause the route lookup to occur in the VRF routing table. This makes the tests pass regardless of the libnet library version. Fixes: 511e8db54036 ("selftests: forwarding: Add test for custom multipath hash") Fixes: 185b0c190bb6 ("selftests: forwarding: Add test for custom multipath hash with IPv4 GRE") Fixes: b7715acba4d3 ("selftests: forwarding: Add test for custom multipath hash with IPv6 GRE") Reported-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Link: https://lore.kernel.org/r/20220809113320.751413-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-17tools/thermal: Fix possible path truncationsFlorian Fainelli
[ Upstream commit 6c58cf40e3a1d2f47c09d3489857e9476316788a ] A build with -D_FORTIFY_SOURCE=2 enabled will produce the following warnings: sysfs.c:63:30: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-truncation=] snprintf(filepath, 256, "%s/%s", path, filename); ^~ Bump up the buffer to PATH_MAX which is the limit and account for all of the possible NUL and separators that could lead to exceeding the allocated buffer sizes. Fixes: 94f69966faf8 ("tools/thermal: Introduce tmon, a tool for thermal subsystem") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTOArnaldo Carvalho de Melo
[ Upstream commit 91cea6be90e436c55cde8770a15e4dac9d3032d0 ] When genelf was introduced it tested for HAVE_LIBCRYPTO not HAVE_LIBCRYPTO_SUPPORT, which is the define the feature test for openssl defines, fix it. This also adds disables the deprecation warning, someone has to fix this to build with openssl 3.0 before the warning becomes a hard error. Fixes: 9b07e27f88b9cd78 ("perf inject: Add jitdump mmap injection support") Reported-by: 谭梓煊 <tanzixuan.me@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Nick Terrell <terrelln@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/YulpPqXSOG0Q4J1o@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17perf symbol: Fail to read phdr workaroundIan Rogers
[ Upstream commit 6d518ac7be6223811ab947897273b1bbef846180 ] The perf jvmti agent doesn't create program headers, in this case fallback on section headers as happened previously. Committer notes: To test this, from a public post by Ian: 1) download a Java workload dacapo-9.12-MR1-bach.jar from https://sourceforge.net/projects/dacapobench/ 2) build perf such as "make -C tools/perf O=/tmp/perf NO_LIBBFD=1" it should detect Java and create /tmp/perf/libperf-jvmti.so 3) run perf with the jvmti agent: perf record -k 1 java -agentpath:/tmp/perf/libperf-jvmti.so -jar dacapo-9.12-MR1-bach.jar -n 10 fop 4) run perf inject: perf inject -i perf.data -o perf-injected.data -j 5) run perf report perf report -i perf-injected.data | grep org.apache.fop With this patch reverted I see lots of symbols like: 0.00% java jitted-388040-4656.so [.] org.apache.fop.fo.FObj.bind(org.apache.fop.fo.PropertyList) With the patch (2d86612aacb7805f ("perf symbol: Correct address for bss symbols")) I see lots of: dso__load_sym_internal: failed to find program header for symbol: Lorg/apache/fop/fo/FObj;bind(Lorg/apache/fop/fo/PropertyList;)V st_value: 0x40 Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220731164923.691193-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17perf tools: Fix dso_id inode generation comparisonAdrian Hunter
[ Upstream commit 68566a7cf56bf3148797c218ed45a9de078ef47c ] Synthesized MMAP events have zero ino_generation, so do not compare them to DSOs with a real ino_generation otherwise we end up with a DSO without a build id. Fixes: 0e3149f86b99ddab ("perf dso: Move dso_id from 'struct map' to 'struct dso'") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: kvm@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220711093218.10967-2-adrian.hunter@intel.com [ Added clarification to the comment from Ian + more detailed explanation from Adrian ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17selftests: kvm: set rax before vmcallAndrei Vagin
[ Upstream commit 281106f938d3daaea6f8b6723a8217a2a1ef6936 ] kvm_hypercall has to place the hypercall number in rax. Trace events show that kvm_pv_test doesn't work properly: kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 With this change, it starts working as expected: kvm_pv_test-54285: kvm_hypercall: nr 0x5 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-54285: kvm_hypercall: nr 0xa a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-54285: kvm_hypercall: nr 0xb a0 0x0 a1 0x0 a2 0x0 a3 0x0 Signed-off-by: Andrei Vagin <avagin@google.com> Message-Id: <20220722230241.1944655-5-avagin@google.com> Fixes: ac4a4d6de22e ("selftests: kvm: test enforcement of paravirtual cpuid features") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17memremap: remove support for external pgmap refcountsChristoph Hellwig
[ Upstream commit b80892ca022e9eb484771a66eb68e12364695a2a ] No driver is left using the external pgmap refcount, so remove the code to support it. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20211028151017.50234-1-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17libbpf: fix an snprintf() overflow checkDan Carpenter
[ Upstream commit b77ffb30cfc5f58e957571d8541c6a7e3da19221 ] The snprintf() function returns the number of bytes it *would* have copied if there were enough space. So it can return > the sizeof(gen->attach_target). Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/YtZ+oAySqIhFl6/J@kili Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17selftests/bpf: fix a test for snprintf() overflowDan Carpenter
[ Upstream commit c5d22f4cfe8dfb93f1db0a1e7e2e7ebc41395d98 ] The snprintf() function returns the number of bytes which *would* have been copied if there were space. In other words, it can be > sizeof(pin_path). Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/YtZ+aD/tZMkgOUw+@kili Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17selftests: timers: clocksource-switch: fix passing errors from childWolfram Sang
[ Upstream commit 4d8f52ac5fa9eede7b7aa2f2d67c841d9eeb655f ] The return value from system() is a waitpid-style integer. Do not return it directly because with the implicit masking in exit() it will always return 0. Access it with appropriate macros to really pass on errors. Fixes: 7290ce1423c3 ("selftests/timers: Add clocksource-switch test from timetest suite") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: John Stultz <jstultz@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17selftests: timers: valid-adjtimex: build fix for newer toolchainsWolfram Sang
[ Upstream commit 9a162977d20436be5678a8e21a8e58eb4616d86a ] Toolchains with an include file 'sys/timex.h' based on 3.18 will have a 'clock_adjtime' definition added, so it can't be static in the code: valid-adjtimex.c:43:12: error: static declaration of ‘clock_adjtime’ follows non-static declaration Fixes: e03a58c320e1 ("kselftests: timers: Add adjtimex SETOFFSET validity tests") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: John Stultz <jstultz@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17libbpf: Fix the name of a reused mapAnquan Wu
[ Upstream commit bf3f00378524adae16628cbadbd11ba7211863bb ] BPF map name is limited to BPF_OBJ_NAME_LEN. A map name is defined as being longer than BPF_OBJ_NAME_LEN, it will be truncated to BPF_OBJ_NAME_LEN when a userspace program calls libbpf to create the map. A pinned map also generates a path in the /sys. If the previous program wanted to reuse the map， it can not get bpf_map by name, because the name of the map is only partially the same as the name which get from pinned path. The syscall information below show that map name "process_pinned_map" is truncated to "process_pinned_". bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/process_pinned_map", bpf_fd=0, file_flags=0}, 144) = -1 ENOENT (No such file or directory) bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4, value_size=4,max_entries=1024, map_flags=0, inner_map_fd=0, map_name="process_pinned_",map_ifindex=0, btf_fd=3, btf_key_type_id=6, btf_value_type_id=10,btf_vmlinux_value_type_id=0}, 72) = 4 This patch check that if the name of pinned map are the same as the actual name for the first (BPF_OBJ_NAME_LEN - 1), bpf map still uses the name which is included in bpf object. Fixes: 26736eb9a483 ("tools: libbpf: allow map reuse") Signed-off-by: Anquan Wu <leiqi96@hotmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/OSZP286MB1725CEA1C95C5CB8E7CCC53FB8869@OSZP286MB1725.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17selftests/xsk: Destroy BPF resources only when ctx refcount drops to 0Maciej Fijalkowski
[ Upstream commit 39e940d4abfabb08b6937a315546b24d10be67e3 ] Currently, xsk_socket__delete frees BPF resources regardless of ctx refcount. Xdpxceiver has a test to verify whether underlying BPF resources would not be wiped out after closing XSK socket that was bound to interface with other active sockets. From library's xsk part perspective it also means that the internal xsk context is shared and its refcount is bumped accordingly. After a switch to loading XDP prog based on previously opened XSK socket, mentioned xdpxceiver test fails with: not ok 16 [xdpxceiver.c:swap_xsk_resources:1334]: ERROR: 9/"Bad file descriptor which means that in swap_xsk_resources(), xsk_socket__delete() released xskmap which in turn caused a failure of xsk_socket__update_xskmap(). To fix this, when deleting socket, decrement ctx refcount before releasing BPF resources and do so only when refcount dropped to 0 which means there are no more active sockets for this ctx so BPF resources can be freed safely. Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20220629143458.934337-5-maciej.fijalkowski@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17thermal/tools/tmon: Include pthread and time headers in tmon.hMarkus Mayer
[ Upstream commit 0cf51bfe999524377fbb71becb583b4ca6d07cfc ] Include sys/time.h and pthread.h in tmon.h, so that types "pthread_mutex_t" and "struct timeval tv" are known when tmon.h references them. Without these headers, compiling tmon against musl-libc will fail with these errors: In file included from sysfs.c:31:0: tmon.h:47:8: error: unknown type name 'pthread_mutex_t' extern pthread_mutex_t input_lock; ^~~~~~~~~~~~~~~ make[3]: *** [<builtin>: sysfs.o] Error 1 make[3]: *** Waiting for unfinished jobs.... In file included from tui.c:31:0: tmon.h:54:17: error: field 'tv' has incomplete type struct timeval tv; ^~ make[3]: *** [<builtin>: tui.o] Error 1 make[2]: *** [Makefile:83: tmon] Error 2 Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Acked-by: Alejandro González <alejandro.gonzalez.correo@gmail.com> Tested-by: Alejandro González <alejandro.gonzalez.correo@gmail.com> Fixes: 94f69966faf8 ("tools/thermal: Introduce tmon, a tool for thermal subsystem") Link: https://lore.kernel.org/r/20220718031040.44714-1-f.fainelli@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17selftests/seccomp: Fix compile warning when CC=clangYiFei Zhu
[ Upstream commit 3ce4b78f73e8e00fb86bad67ee7f6fe12019707e ] clang has -Wconstant-conversion by default, and the constant 0xAAAAAAAAA (9 As) being converted to an int, which is generally 32 bits, results in the compile warning: clang -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/ -lpthread seccomp_bpf.c -lcap -o seccomp_bpf seccomp_bpf.c:812:67: warning: implicit conversion from 'long' to 'int' changes value from 45812984490 to -1431655766 [-Wconstant-conversion] int kill = kill_how == KILL_PROCESS ? SECCOMP_RET_KILL_PROCESS : 0xAAAAAAAAA; ~~~~ ^~~~~~~~~~~ 1 warning generated. -1431655766 is the expected truncation, 0xAAAAAAAA (8 As), so use this directly in the code to avoid the warning. Fixes: 3932fcecd962 ("selftests/seccomp: Add test for unknown SECCOMP_RET kill behavior") Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220526223407.1686936-1-zhuyifei@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-11x86/speculation: Add RSB VM Exit protectionsDaniel Sneddon
commit 2b1299322016731d56807aa49254a5ea3080b6b3 upstream. tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as documented for RET instructions after VM exits. Mitigate it with a new one-entry RSB stuffing mechanism and a new LFENCE. == Background == Indirect Branch Restricted Speculation (IBRS) was designed to help mitigate Branch Target Injection and Speculative Store Bypass, i.e. Spectre, attacks. IBRS prevents software run in less privileged modes from affecting branch prediction in more privileged modes. IBRS requires the MSR to be written on every privilege level change. To overcome some of the performance issues of IBRS, Enhanced IBRS was introduced. eIBRS is an "always on" IBRS, in other words, just turn it on once instead of writing the MSR on every privilege level change. When eIBRS is enabled, more privileged modes should be protected from less privileged modes, including protecting VMMs from guests. == Problem == Here's a simplification of how guests are run on Linux' KVM: void run_kvm_guest(void) { // Prepare to run guest VMRESUME(); // Clean up after guest runs } The execution flow for that would look something like this to the processor: 1. Host-side: call run_kvm_guest() 2. Host-side: VMRESUME 3. Guest runs, does "CALL guest_function" 4. VM exit, host runs again 5. Host might make some "cleanup" function calls 6. Host-side: RET from run_kvm_guest() Now, when back on the host, there are a couple of possible scenarios of post-guest activity the host needs to do before executing host code: * on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not touched and Linux has to do a 32-entry stuffing. * on eIBRS hardware, VM exit with IBRS enabled, or restoring the host IBRS=1 shortly after VM exit, has a documented side effect of flushing the RSB except in this PBRSB situation where the software needs to stuff the last RSB entry "by hand". IOW, with eIBRS supported, host RET instructions should no longer be influenced by guest behavior after the host retires a single CALL instruction. However, if the RET instructions are "unbalanced" with CALLs after a VM exit as is the RET in #6, it might speculatively use the address for the instruction after the CALL in #3 as an RSB prediction. This is a problem since the (untrusted) guest controls this address. Balanced CALL/RET instruction pairs such as in step #5 are not affected. == Solution == The PBRSB issue affects a wide variety of Intel processors which support eIBRS. But not all of them need mitigation. Today, X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e., eIBRS systems which enable legacy IBRS explicitly. However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT and most of them need a new mitigation. Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT. The lighter-weight mitigation performs a CALL instruction which is immediately followed by a speculative execution barrier (INT3). This steers speculative execution to the barrier -- just like a retpoline -- which ensures that speculation can never reach an unbalanced RET. Then, ensure this CALL is retired before continuing execution with an LFENCE. In other words, the window of exposure is opened at VM exit where RET behavior is troublesome. While the window is open, force RSB predictions sampling for RET targets to a dead end at the INT3. Close the window with the LFENCE. There is a subset of eIBRS systems which are not vulnerable to PBRSB. Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB. Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO. [ bp: Massage, incorporate review comments from Andy Cooper. ] Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-11selftests: KVM: Handle compiler optimizations in ucallRaghavendra Rao Ananta
[ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol@google.com> Suggested-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Message-Id: <20220615185706.1099208-1-rananta@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-11tools/kvm_stat: fix display of error when multiple processes are foundDmitry Klochkov
[ Upstream commit 933b5f9f98da29af646b51b36a0753692908ef64 ] Instead of printing an error message, kvm_stat script fails when we restrict statistics to a guest by its name and there are multiple guests with such name: # kvm_stat -g my_vm Traceback (most recent call last): File "/usr/bin/kvm_stat", line 1819, in <module> main() File "/usr/bin/kvm_stat", line 1779, in main options = get_options() File "/usr/bin/kvm_stat", line 1718, in get_options options = argparser.parse_args() File "/usr/lib64/python3.10/argparse.py", line 1825, in parse_args args, argv = self.parse_known_args(args, namespace) File "/usr/lib64/python3.10/argparse.py", line 1858, in parse_known_args namespace, args = self._parse_known_args(args, namespace) File "/usr/lib64/python3.10/argparse.py", line 2067, in _parse_known_args start_index = consume_optional(start_index) File "/usr/lib64/python3.10/argparse.py", line 2007, in consume_optional take_action(action, args, option_string) File "/usr/lib64/python3.10/argparse.py", line 1935, in take_action action(self, namespace, argument_values, option_string) File "/usr/bin/kvm_stat", line 1649, in __call__ ' to specify the desired pid'.format(" ".join(pids))) TypeError: sequence item 0: expected str instance, int found To avoid this, it's needed to convert pids int values to strings before pass them to join(). Signed-off-by: Dmitry Klochkov <kdmitry556@gmail.com> Message-Id: <20220614121141.160689-1-kdmitry556@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-11KVM: selftests: Make hyperv_clock selftest more stableVitaly Kuznetsov
[ Upstream commit eae260be3a0111a28fe95923e117a55dddec0384 ] hyperv_clock doesn't always give a stable test result, especially with AMD CPUs. The test compares Hyper-V MSR clocksource (acquired either with rdmsr() from within the guest or KVM_GET_MSRS from the host) against rdtsc(). To increase the accuracy, increase the measured delay (done with nop loop) by two orders of magnitude and take the mean rdtsc() value before and after rdmsr()/KVM_GET_MSRS. Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220601144322.1968742-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-11tools/vm/slabinfo: Handle files in debugfsStéphane Graber
commit 0c7e0d699ef1430d7f4cf12b4b1d097af58b5515 upstream. Commit 64dd68497be76 relocated and renamed the alloc_calls and free_calls files from /sys/kernel/slab/NAME/*_calls over to /sys/kernel/debug/slab/NAME/*_calls but didn't update the slabinfo tool with the new location. This change will now have slabinfo look at the new location (and filenames) with a fallback to the prior files. Fixes: 64dd68497be76 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Cc: stable@vger.kernel.org Signed-off-by: Stéphane Graber <stgraber@ubuntu.com> Tested-by: Stéphane Graber <stgraber@ubuntu.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-11selftests/bpf: Check dst_port only on the client socketJakub Sitnicki
commit 2d2202ba858c112b03f84d546e260c61425831a1 upstream. cgroup_skb/egress programs which sock_fields test installs process packets flying in both directions, from the client to the server, and in reverse direction. Recently added dst_port check relies on the fact that destination port (remote peer port) of the socket which sends the packet is known ahead of time. This holds true only for the client socket, which connects to the known server port. Filter out any traffic that is not egressing from the client socket in the BPF program that tests reading the dst_port. Fixes: 8f50f16ff39d ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-11selftests/bpf: Extend verifier and bpf_sock tests for dst_port loadsJakub Sitnicki
commit 8f50f16ff39dd4e2d43d1548ca66925652f8aff7 upstream. Add coverage to the verifier tests and tests for reading bpf_sock fields to ensure that 32-bit, 16-bit, and 8-bit loads from dst_port field are allowed only at intended offsets and produce expected values. While 16-bit and 8-bit access to dst_port field is straight-forward, 32-bit wide loads need be allowed and produce a zero-padded 16-bit value for backward compatibility. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20220130115518.213259-3-jakub@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03libbpf: add Tx headroom support for AF_XDP buffersRobert-Ionut Alexa
Reserve frame headroom within the buffers used on the Tx side. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
2022-08-03selftests: xsk: Move num_frames and frame_headroom to xsk_umem_infoMagnus Karlsson
Move the global variables num_frames and frame_headroom to struct xsk_umem_info. They describe properties of the umem so no reason for them to be global. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20210907071928.9750-5-magnus.karlsson@gmail.com (cherry picked from commit 83f4ae2f26bd67c58d528c3967c5ad3e58098be3) Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
2022-08-03perf symbol: Correct address for bss symbolsLeo Yan
[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ] When using 'perf mem' and 'perf c2c', an issue is observed that tool reports the wrong offset for global data symbols. This is a common issue on both x86 and Arm64 platforms. Let's see an example, for a test program, below is the disassembly for its .bss section which is dumped with objdump: ... Disassembly of section .bss: 0000000000004040 <completed.0>: ... 0000000000004080 <buf1>: ... 00000000000040c0 <buf2>: ... 0000000000004100 <thread>: ... First we used 'perf mem record' to run the test program and then used 'perf --debug verbose=4 mem report' to observe what's the symbol info for 'buf1' and 'buf2' structures. # ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8 # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf2 0x30a8-0x30e8 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf1 0x3068-0x30a8 ... The perf tool relies on libelf to parse symbols, in executable and shared object files, 'st_value' holds a virtual address; 'sh_addr' is the address at which section's first byte should reside in memory, and 'sh_offset' is the byte offset from the beginning of the file to the first byte in the section. The perf tool uses below formula to convert a symbol's memory address to a file address: file_address = st_value - sh_addr + sh_offset ^ ` Memory address We can see the final adjusted address ranges for buf1 and buf2 are [0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is incorrect, in the code, the structure for 'buf1' and 'buf2' specifies compiler attribute with 64-byte alignment. The problem happens for 'sh_offset', libelf returns it as 0x3028 which is not 64-byte aligned, combining with disassembly, it's likely libelf doesn't respect the alignment for .bss section, therefore, it doesn't return the aligned value for 'sh_offset'. Suggested by Fangrui Song, ELF file contains program header which contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD segments contain the execution info. A better choice for converting memory address to file address is using the formula: file_address = st_value - p_vaddr + p_offset This patch introduces elf_read_program_header() which returns the program header based on the passed 'st_value', then it uses the formula above to calculate the symbol file address; and the debugging log is updated respectively. After applying the change: # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf2 0x30c0-0x3100 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf1 0x3080-0x30c0 ... Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing") Reported-by: Chang Rui <changruinj@gmail.com> Suggested-by: Fangrui Song <maskray@google.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29KVM: selftests: Fix target thread to be migrated in rseq_testGavin Shan
commit e923b0537d28e15c9d31ce8b38f810b325816903 upstream. In rseq_test, there are two threads, which are vCPU thread and migration worker separately. Unfortunately, the test has the wrong PID passed to sched_setaffinity() in the migration worker. It forces migration on the migration worker because zeroed PID represents the calling thread, which is the migration worker itself. It means the vCPU thread is never enforced to migration and it can migrate at any time, which eventually leads to failure as the following logs show. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; do \ echo "--------> $i"; ./rseq_test; done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 Fix the issue by passing correct parameter, TID of the vCPU thread, to sched_setaffinity() in the migration worker. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Message-Id: <20220719020830.3479482-1-gshan@redhat.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29perf tests: Fix Convert perf time to TSC test for hybridAdrian Hunter
[ Upstream commit deb44a6249f696106645c63c0603eab08a6122af ] The test does not always correctly determine the number of events for hybrids, nor allow for more than 1 evsel when parsing. Fix by iterating the events actually created and getting the correct evsel for the events processed. Fixes: d9da6f70eb235110 ("perf tests: Support 'Convert perf time to TSC' test for hybrid") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220713123459.24145-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29Revert "selftest/vm: verify mmap addr in mremap_test"Oleksandr Tymoshenko
This reverts commit e8b9989597daac896b3400b7005f24bf15233d9a. The upstream commit 9c85a9bae267 ("selftest/vm: verify mmap addr in mremap_test") was backported as commit a17404fcbfd0 ("selftest/vm: verify mmap addr in mremap_test"). Repeated backport introduced the duplicate of function get_mmap_min_addr to the file breakign the vm selftest build. Fixes: e8b9989597da ("selftest/vm: verify mmap addr in mremap_test") Signed-off-by: Oleksandr Tymoshenko <ovt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29Revert "selftest/vm: verify remap destination address in mremap_test"Oleksandr Tymoshenko
This reverts commit 0b4e16093e081a3ab08b0d6cedf79b249f41b248. The upstream commit 18d609daa546 ("selftest/vm: verify remap destination address in mremap_test") was backported as commit 2688d967ec65 ("selftest/vm: verify remap destination address in mremap_test"). Repeated backport introduced the duplicate of function is_remap_region_valid to the file breakign the vm selftest build. Fixes: 0b4e16093e08 ("selftest/vm: verify remap destination address in mremap_test") Signed-off-by: Oleksandr Tymoshenko <ovt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-26MLK-25963 tools: perf: add imx93 ddr perfmon metricXu Yang
Add imx93 ddr perfmon metric root@imx8mmevk:~# ./perf list metric List of pre-defined events (to be used in -e): Metrics: imx93_bandwidth_usage.lpddr4x [bandwidth usage for lpddr4x evk board. Unit: uncore_imx9_ddr ] imx93_ddr_read.all [bytes all masters read from ddr. Unit: uncore_imx9_ddr ] imx93_ddr_write.all [bytes all masters write to ddr. Unit: uncore_imx9_ddr ] Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
2022-07-23tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo
commit f098addbdb44c8a565367f5162f3ab170ed9404a upstream. To pick the changes from: f43b9876e857c739 ("x86/retbleed: Add fine grained Kconfig knobs") a149180fbcf336e9 ("x86: Add magic AMD return-thunk") 15e67227c49a5783 ("x86: Undo return-thunk damage") 369ae6ffc41a3c11 ("x86/retpoline: Cleanup some #ifdefery") 4ad3278df6fe2b08 x86/speculation: Disable RRSBA behavior 26aae8ccbc197223 x86/cpu/amd: Enumerate BTC_NO 9756bba28470722d x86/speculation: Fill RSB on vmexit for IBRS 3ebc170068885b6f x86/bugs: Add retbleed=ibpb 2dbb887e875b1de3 x86/entry: Add kernel IBRS implementation 6b80b59b35557065 x86/bugs: Report AMD retbleed vulnerability a149180fbcf336e9 x86: Add magic AMD return-thunk 15e67227c49a5783 x86: Undo return-thunk damage a883d624aed463c8 x86/cpufeatures: Move RETPOLINE flags to word 11 51802186158c74a0 x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org Link: https://lore.kernel.org/lkml/YtQM40VmiLTkPND2@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
commit 91d248c3b903b46a58cbc7e8d38d684d3e4007c2 upstream. To pick up the changes from these csets: 4ad3278df6fe2b08 ("x86/speculation: Disable RRSBA behavior") d7caac991feeef1b ("x86/cpu/amd: Add Spectral Chicken") That cause no changes to tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ Just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YtQTm9wsB3hxQWvy@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23x86/speculation: Disable RRSBA behaviorPawan Gupta
commit 4ad3278df6fe2b0852b00d5757fc2ccd8e92c26e upstream. Some Intel processors may use alternate predictors for RETs on RSB-underflow. This condition may be vulnerable to Branch History Injection (BHI) and intramode-BTI. Kernel earlier added spectre_v2 mitigation modes (eIBRS+Retpolines, eIBRS+LFENCE, Retpolines) which protect indirect CALLs and JMPs against such attacks. However, on RSB-underflow, RET target prediction may fallback to alternate predictors. As a result, RET's predicted target may get influenced by branch history. A new MSR_IA32_SPEC_CTRL bit (RRSBA_DIS_S) controls this fallback behavior when in kernel mode. When set, RETs will not take predictions from alternate predictors, hence mitigating RETs as well. Support for this is enumerated by CPUID.7.2.EDX[RRSBA_CTRL] (bit2). For spectre v2 mitigation, when a user selects a mitigation that protects indirect CALLs and JMPs against BHI and intramode-BTI, set RRSBA_DIS_S also to protect RETs for RSB-underflow case. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> [cascardo: no X86_FEATURE_INTEL_PPIN] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23x86/retbleed: Add fine grained Kconfig knobsPeter Zijlstra
commit f43b9876e857c739d407bc56df288b0ebe1a9164 upstream. Do fine-grained Kconfig for all the various retbleed parts. NOTE: if your compiler doesn't support return thunks this will silently 'upgrade' your mitigation to IBPB, you might not like this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> [cascardo: there is no CONFIG_OBJTOOL] [cascardo: objtool calling and option parsing has changed] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}Josh Poimboeuf
commit 8faea26e611189e933ea2281975ff4dc7c1106b6 upstream. Commit c536ed2fffd5 ("objtool: Remove SAVE/RESTORE hints") removed the save/restore unwind hints because they were no longer needed. Now they're going to be needed again so re-add them. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Add entry UNRET validationPeter Zijlstra
commit a09a6e2399ba0595c3042b3164f3ca68a3cff33e upstream. Since entry asm is tricky, add a validation pass that ensures the retbleed mitigation has been done before the first actual RET instruction. Entry points are those that either have UNWIND_HINT_ENTRY, which acts as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or those that have UWIND_HINT_IRET_REGS at +0. This is basically a variant of validate_branch() that is intra-function and it will simply follow all branches from marked entry points and ensures that all paths lead to ANNOTATE_UNRET_END. If a path hits RET or an indirection the path is a fail and will be reported. There are 3 ANNOTATE_UNRET_END instances: - UNTRAIN_RET itself - exception from-kernel; this path doesn't need UNTRAIN_RET - all early exceptions; these also don't need UNTRAIN_RET Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> [cascardo: tools/objtool/builtin-check.c no link option validation] [cascardo: tools/objtool/check.c opts.ibt is ibt] [cascardo: tools/objtool/include/objtool/builtin.h leave unret option as bool, no struct opts] [cascardo: objtool is still called from scripts/link-vmlinux.sh] [cascardo: no IBT support] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Update Retpoline validationPeter Zijlstra
commit 9bb2ec608a209018080ca262f771e6a9ff203b6f upstream. Update retpoline validation with the new CONFIG_RETPOLINE requirement of not having bare naked RET instructions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> [cascardo: conflict fixup at arch/x86/xen/xen-head.S] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23x86: Add magic AMD return-thunkPeter Zijlstra
commit a149180fbcf336e97ce4eb2cdc13672727feb94d upstream. Note: needs to be in a section distinct from Retpolines such that the Retpoline RET substitution cannot possibly use immediate jumps. ORC unwinding for zen_untrain_ret() and __x86_return_thunk() is a little tricky but works due to the fact that zen_untrain_ret() doesn't have any stack ops and as such will emit a single ORC entry at the start (+0x3f). Meanwhile, unwinding an IP, including the __x86_return_thunk() one (+0x40) will search for the largest ORC entry smaller or equal to the IP, these will find the one ORC entry (+0x3f) and all works. [ Alexandre: SVM part. ] [ bp: Build fix, massages. ] Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> [cascardo: conflicts at arch/x86/entry/entry_64_compat.S] [cascardo: there is no ANNOTATE_NOENDBR] [cascardo: objtool commit 34c861e806478ac2ea4032721defbf1d6967df08 missing] [cascardo: conflict fixup] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Treat .text.__x86.* as noinstrPeter Zijlstra
commit 951ddecf435659553ed15a9214e153a3af43a9a1 upstream. Needed because zen_untrain_ret() will be called from noinstr code. Also makes sense since the thunks MUST NOT contain instrumentation nor be poked with dynamic instrumentation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: skip non-text sections when adding return-thunk sitesThadeu Lima de Souza Cascardo
The .discard.text section is added in order to reserve BRK, with a temporary function just so it can give it a size. This adds a relocation to the return thunk, which objtool will add to the .return_sites section. Linking will then fail as there are references to the .discard.text section. Do not add instructions from non-text sections to the list of return thunk calls, avoiding the reference to .discard.text. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23x86,objtool: Create .return_sitesPeter Zijlstra
commit d9e9d2300681d68a775c28de6aa6e5290ae17796 upstream. Find all the return-thunk sites and record them in a .return_sites section such that the kernel can undo this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> [cascardo: conflict fixup because of functions added to support IBT] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Default ignore INT3 for unreachablePeter Zijlstra
commit 1ffbe4e935f9b7308615c75be990aec07464d1e7 upstream. Ignore all INT3 instructions for unreachable code warnings, similar to NOP. This allows using INT3 for various paddings instead of NOPs. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154317.343312938@infradead.org Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Introduce CFI hashPeter Zijlstra
commit 8b946cc38e063f0f7bb67789478c38f6d7d457c9 upstream. Andi reported that objtool on vmlinux.o consumes more memory than his system has, leading to horrific performance. This is in part because we keep a struct instruction for every instruction in the file in-memory. Shrink struct instruction by removing the CFI state (which includes full register state) from it and demand allocating it. Given most instructions don't actually change CFI state, there's lots of repetition there, so add a hash table to find previous CFI instances. Reduces memory consumption (and runtime) for processing an x86_64-allyesconfig: pre: 4:40.84 real, 143.99 user, 44.18 sys, 30624988 mem post: 2:14.61 real, 108.58 user, 25.04 sys, 16396184 mem Suggested-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210624095147.756759107@infradead.org Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool,x86: Replace alternatives with .retpoline_sitesPeter Zijlstra
commit 134ab5bd1883312d7a4b3033b05c6b5a1bb8889b upstream. Instead of writing complete alternatives, simply provide a list of all the retpoline thunk calls. Then the kernel is free to do with them as it pleases. Simpler code all-round. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.850007165@infradead.org [cascardo: fixed conflict because of missing 8b946cc38e063f0f7bb67789478c38f6d7d457c9] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Shrink struct instructionPeter Zijlstra
commit c509331b41b7365e17396c246e8c5797bccc8074 upstream. Any one instruction can only ever call a single function, therefore insn->mcount_loc_node is superfluous and can use insn->call_node. This shrinks struct instruction, which is by far the most numerous structure objtool creates. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.785456706@infradead.org Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Explicitly avoid self modifying code in .altinstr_replacementPeter Zijlstra
commit dd003edeffa3cb87bc9862582004f405d77d7670 upstream. Assume ALTERNATIVE()s know what they're doing and do not change, or cause to change, instructions in .altinstr_replacement sections. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.722511775@infradead.org [cascardo: context adjustment] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-23objtool: Classify symbolsPeter Zijlstra
commit 1739c66eb7bd5f27f1b69a5a26e10e8327d1e136 upstream. In order to avoid calling str*cmp() on symbol names, over and over, do them all once upfront and store the result. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.658539311@infradead.org [cascardo: no pv_target on struct symbol, because of missing db2b0c5d7b6f19b3c2cab08c531b65342eb5252b] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12selftests/net: fix section name when using xdp_dummy.oHangbin Liu
commit d28b25a62a47a8c8aa19bd543863aab6717e68c9 upstream. Since commit 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests") the xdp_dummy.o's section name has changed to xdp. But some tests are still using "section xdp_dummy", which make the tests failed. Fix them by updating to the new section name. Fixes: 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20220630062228.3453016-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12selftests: forwarding: fix error message in learning_testVladimir Oltean
[ Upstream commit 83844aacab2015da1dba1df0cc61fc4b4c4e8076 ] When packets are not received, they aren't received on $host1_if, so the message talking about the second host not receiving them is incorrect. Fix it. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLTVladimir Oltean
[ Upstream commit 1a635d3e1c80626237fdae47a5545b6655d8d81c ] The first host interface has by default no interest in receiving packets MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc filter and this might confuse the selftest. Enable promiscuous mode such that the filter properly counts received packets. Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-04 23:34:48 +0000