summaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)Author
2018-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree: 1) Support for matching on ipsec policy already set in the route, from Florian Westphal. 2) Split set destruction into deactivate and destroy phase to make it fit better into the transaction infrastructure, also from Florian. This includes a patch to warn on imbalance when setting the new activate and deactivate interfaces. 3) Release transaction list from the workqueue to remove expensive synchronize_rcu() from configuration plane path. This speeds up configuration plane quite a bit. From Florian Westphal. 4) Add new xfrm/ipsec extension, this new extension allows you to match for ipsec tunnel keys such as source and destination address, spi and reqid. From Máté Eckl and Florian Westphal. 5) Add secmark support, this includes connsecmark too, patches from Christian Gottsche. 6) Allow to specify remaining bytes in xt_quota, from Chenbo Feng. One follow up patch to calm a clang warning for this one, from Nathan Chancellor. 7) Flush conntrack entries based on layer 3 family, from Kristian Evensen. 8) New revision for cgroups2 to shrink the path field. 9) Get rid of obsolete need_conntrack(), as a result from recent demodularization works. 10) Use WARN_ON instead of BUG_ON, from Florian Westphal. 11) Unused exported symbol in nf_nat_ipv4_fn(), from Florian. 12) Remove superfluous check for timeout netlink parser and dump functions in layer 4 conntrack helpers. 13) Unnecessary redundant rcu read side locks in NAT redirect, from Taehee Yoo. 14) Pass nf_hook_state structure to error handlers, patch from Florian Westphal. 15) Remove ->new() interface from layer 4 protocol trackers. Place them in the ->packet() interface. From Florian. 16) Place conntrack ->error() handling in the ->packet() interface. Patches from Florian Westphal. 17) Remove unused parameter in the pernet initialization path, also from Florian. 18) Remove additional parameter to specify layer 3 protocol when looking up for protocol tracker. From Florian. 19) Shrink array of layer 4 protocol trackers, from Florian. 20) Check for linear skb only once from the ALG NAT mangling codebase, from Taehee Yoo. 21) Use rhashtable_walk_enter() instead of deprecated rhashtable_walk_init(), also from Taehee. 22) No need to flush all conntracks when only one single address is gone, from Tan Hu. 23) Remove redundant check for NAT flags in flowtable code, from Taehee Yoo. 24) Use rhashtable_lookup() instead of rhashtable_lookup_fast() from netfilter codebase, since rcu read lock side is already assumed in this path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-10-04openvswitch: load NAT helperFlavio Leitner
Load the respective NAT helper module if the flow uses it. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Revert "openvswitch: Fix template leak in error cases."Flavio Leitner
This reverts commit 90c7afc96cbbd77f44094b5b651261968e97de67. When the commit was merged, the code used nf_ct_put() to free the entry, but later on commit 76644232e612 ("openvswitch: Free tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which is a more appropriate. Now the original problem is removed. Then 44d6e2f27328 ("net: Replace NF_CT_ASSERT() with WARN_ON().") replaced a debug assert with a WARN_ON() which is trigged now. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29openvswitch: Use correct reply values in datapath and vport opsYifeng Sun
This patch fixes the bug that all datapath and vport ops are returning wrong values (OVS_FLOW_CMD_NEW or OVS_DP_CMD_NEW) in their replies. Signed-off-by: Yifeng Sun <pkusunyifeng@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28net: ovs: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20netfilter: conntrack: pass nf_hook_state to packet and error handlersFlorian Westphal
nf_hook_state contains all the hook meta-information: netns, protocol family, hook location, and so on. Instead of only passing selected information, pass a pointer to entire structure. This will allow to merge the error and the packet handlers and remove the ->new() function in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-06openvswitch: Derive IP protocol number for IPv6 later fragsYi-Hung Wei
Currently, OVS only parses the IP protocol number for the first IPv6 fragment, but sets the IP protocol number for the later fragments to be NEXTHDF_FRAGMENT. This patch tries to derive the IP protocol number for the IPV6 later frags so that we can match that. Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29openvswitch: meter: Fix setting meter id for new entriesJustin Pettit
The meter code would create an entry for each new meter. However, it would not set the meter id in the new entry, so every meter would appear to have a meter id of zero. This commit properly sets the meter id when adding the entry. Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Justin Pettit <jpettit@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18ipv6: remove dependency of nf_defrag_ipv6 on ipv6 moduleFlorian Westphal
IPV6=m DEFRAG_IPV6=m CONNTRACK=y yields: net/netfilter/nf_conntrack_proto.o: In function `nf_ct_netns_do_get': net/netfilter/nf_conntrack_proto.c:802: undefined reference to `nf_defrag_ipv6_enable' net/netfilter/nf_conntrack_proto.o:(.rodata+0x640): undefined reference to `nf_conntrack_l4proto_icmpv6' Setting DEFRAG_IPV6=y causes undefined references to ip6_rhash_params ip6_frag_init and ip6_expire_frag_queue so it would be needed to force IPV6=y too. This patch gets rid of the 'followup linker error' by removing the dependency of ipv6.ko symbols from netfilter ipv6 defrag. Shared code is placed into a header, then used from both. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-18netfilter: Remove useless param helper of nf_ct_helper_ext_addGao Feng
The param helper of nf_ct_helper_ext_add is useless now, then remove it now. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-16openvswitch: use nf_ct_get_tuplepr, invert_tupleprFlorian Westphal
These versions deal with the l3proto/l4proto details internally. It removes only caller of nf_ct_get_tuple, so make it static. After this, l3proto->get_l4proto() can be removed in a followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-08openvswitch: kernel datapath clone actionYifeng Sun
Add 'clone' action to kernel datapath by using existing functions. When actions within clone don't modify the current flow, the flow key is not cloned before executing clone actions. This is a follow up patch for this incomplete work: https://patchwork.ozlabs.org/patch/722096/ v1 -> v2: Refactor as advised by reviewer. Signed-off-by: Yifeng Sun <pkusunyifeng@gmail.com> Signed-off-by: Andy Zhou <azhou@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: check tunnel option type in tunnel flagsPieter Jansen van Vuuren
Check the tunnel option type stored in tunnel flags when creating options for tunnels. Thereby ensuring we do not set geneve, vxlan or erspan tunnel options on interfaces that are not associated with them. Make sure all users of the infrastructure set correct flags, for the BPF helper we have to set all bits to keep backward compatibility. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-25openvswitch: Support conntrack zone limitYi-Hung Wei
Currently, nf_conntrack_max is used to limit the maximum number of conntrack entries in the conntrack table for every network namespace. For the VMs and containers that reside in the same namespace, they share the same conntrack table, and the total # of conntrack entries for all the VMs and containers are limited by nf_conntrack_max. In this case, if one of the VM/container abuses the usage the conntrack entries, it blocks the others from committing valid conntrack entries into the conntrack table. Even if we can possibly put the VM in different network namespace, the current nf_conntrack_max configuration is kind of rigid that we cannot limit different VM/container to have different # conntrack entries. To address the aforementioned issue, this patch proposes to have a fine-grained mechanism that could further limit the # of conntrack entries per-zone. For example, we can designate different zone to different VM, and set conntrack limit to each zone. By providing this isolation, a mis-behaved VM only consumes the conntrack entries in its own zone, and it will not influence other well-behaved VMs. Moreover, the users can set various conntrack limit to different zone based on their preference. The proposed implementation utilizes Netfilter's nf_conncount backend to count the number of connections in a particular zone. If the number of connection is above a configured limitation, ovs will return ENOMEM to the userspace. If userspace does not configure the zone limit, the limit defaults to zero that is no limitation, which is backward compatible to the behavior without this patch. The following high leve APIs are provided to the userspace: - OVS_CT_LIMIT_CMD_SET: * set default connection limit for all zones * set the connection limit for a particular zone - OVS_CT_LIMIT_CMD_DEL: * remove the connection limit for a particular zone - OVS_CT_LIMIT_CMD_GET: * get the default connection limit for all zones * get the connection limit for a particular zone Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04openvswitch: Don't swap table in nlattr_set() after OVS_ATTR_NESTED is foundStefano Brivio
If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one. However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes. For example, given this sequence: 1 OVS_KEY_ATTR_PRIORITY 2 OVS_KEY_ATTR_TUNNEL 3 OVS_TUNNEL_KEY_ATTR_ID 4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC 5 OVS_TUNNEL_KEY_ATTR_IPV4_DST 6 OVS_TUNNEL_KEY_ATTR_TTL 7 OVS_TUNNEL_KEY_ATTR_TP_SRC 8 OVS_TUNNEL_KEY_ATTR_TP_DST 9 OVS_KEY_ATTR_IN_PORT 10 OVS_KEY_ATTR_SKB_MARK 11 OVS_KEY_ATTR_MPLS we switch to the 'ovs_tunnel_key_lens' table on attribute #3, and we don't switch back to 'ovs_key_lens' while setting attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table: [ 7654.586496] ================================================================== [ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch] [ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430 [ 7654.610983] [ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1 [ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 7654.631379] Call Trace: [ 7654.634108] [<ffffffffb65a7c50>] dump_stack+0x19/0x1b [ 7654.639843] [<ffffffffb53ff373>] print_address_description+0x33/0x290 [ 7654.647129] [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch] [ 7654.654607] [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330 [ 7654.661406] [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40 [ 7654.668789] [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch] [ 7654.676076] [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch] [ 7654.684234] [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40 [ 7654.689968] [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590 [ 7654.696574] [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch] [ 7654.705122] [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0 [ 7654.712503] [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21 [ 7654.719401] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.726298] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.733195] [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50 [ 7654.740187] [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0 [ 7654.746406] [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20 [ 7654.752914] [<ffffffffb53fe711>] ? memset+0x31/0x40 [ 7654.758456] [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch] [snip] [ 7655.132484] The buggy address belongs to the variable: [ 7655.138226] ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch] [ 7655.145507] [ 7655.147166] Memory state around the buggy address: [ 7655.152514] ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa [ 7655.160585] ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa [ 7655.176701] ^ [ 7655.184372] ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05 [ 7655.192431] ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.200490] ================================================================== Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: 982b52700482 ("openvswitch: Fix mask generation for nested attributes.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24netfilter: add NAT support for shifted portmap rangesThierry Du Tre
This is a patch proposal to support shifted ranges in portmaps. (i.e. tcp/udp incoming port 5000-5100 on WAN redirected to LAN 192.168.1.5:2000-2100) Currently DNAT only works for single port or identical port ranges. (i.e. ports 5000-5100 on WAN interface redirected to a LAN host while original destination port is not altered) When different port ranges are configured, either 'random' mode should be used, or else all incoming connections are mapped onto the first port in the redirect range. (in described example WAN:5000-5100 will all be mapped to 192.168.1.5:2000) This patch introduces a new mode indicated by flag NF_NAT_RANGE_PROTO_OFFSET which uses a base port value to calculate an offset with the destination port present in the incoming stream. That offset is then applied as index within the redirect port range (index modulo rangewidth to handle range overflow). In described example the base port would be 5000. An incoming stream with destination port 5004 would result in an offset value 4 which means that the NAT'ed stream will be using destination port 2004. Other possibilities include deterministic mapping of larger or multiple ranges to a smaller range : WAN:5000-5999 -> LAN:5000-5099 (maps WAN port 5*xx to port 51xx) This patch does not change any current behavior. It just adds new NAT proto range functionality which must be selected via the specific flag when intended to use. A patch for iptables (libipt_DNAT.c + libip6t_DNAT.c) will also be proposed which makes this functionality immediately available. Signed-off-by: Thierry Du Tre <thierry@dtsystems.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-29ovs: Remove rtnl_lock() from ovs_exit_net()Kirill Tkhai
Here we iterate for_each_net() and removes vport from alive net to the exiting net. ovs_net::dps are protected by ovs_mutex(), and the others, who change it (ovs_dp_cmd_new(), __dp_destroy()) also take it. The same with datapath::ports list. So, we remove rtnl_lock() here. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: Introduce net_rwsem to protect net_namespace_listKirill Tkhai
rtnl_lock() is used everywhere, and contention is very high. When someone wants to iterate over alive net namespaces, he/she has no a possibility to do that without exclusive lock. But the exclusive rtnl_lock() in such places is overkill, and it just increases the contention. Yes, there is already for_each_net_rcu() in kernel, but it requires rcu_read_lock(), and this can't be sleepable. Also, sometimes it may be need really prevent net_namespace_list growth, so for_each_net_rcu() is not fit there. This patch introduces new rw_semaphore, which will be used instead of rtnl_mutex to protect net_namespace_list. It is sleepable and allows not-exclusive iterations over net namespaces list. It allows to stop using rtnl_lock() in several places (what is made in next patches) and makes less the time, we keep rtnl_mutex. Here we just add new lock, while the explanation of we can remove rtnl_lock() there are in next patches. Fine grained locks generally are better, then one big lock, so let's do that with net_namespace_list, while the situation allows that. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17net: Convert ovs_net_opsKirill Tkhai
These pernet_operations initialize and destroy net_generic() data pointed by ovs_net_id. Exit method destroys vports from alive net to exiting net. Since they are only pernet_operations interested in this data, and exit method is executed under exclusive global lock (ovs_mutex), they are safe to be executed in parallel. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11openvswitch: meter: fix the incorrect calculation of max delta_tzhangliping
Max delat_t should be the full_bucket/rate instead of the full_bucket. Also report EINVAL if the rate is zero. Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: zhangliping <zhangliping02@baidu.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08openvswitch: fix vport packet length check.William Tu
When sending a packet to a tunnel device, the dev's hard_header_len could be larger than the skb->len in function packet_length(). In the case of ip6gretap/erspan, hard_header_len = LL_MAX_HEADER + t_hlen, which is around 180, and an ARP packet sent to this tunnel has skb->len = 42. This causes the 'unsign int length' to become super large because it is negative value, causing the later ovs_vport_send to drop it due to over-mtu size. The patch fixes it by setting it to 0. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-01openvswitch: Remove padding from packet before L3+ conntrack processingEd Swierk
IPv4 and IPv6 packets may arrive with lower-layer padding that is not included in the L3 length. For example, a short IPv4 packet may have up to 6 bytes of padding following the IP payload when received on an Ethernet device with a minimum packet length of 64 bytes. Higher-layer processing functions in netfilter (e.g. nf_ip_checksum(), and help() in nf_conntrack_ftp) assume skb->len reflects the length of the L3 header and payload, rather than referring back to ip_hdr->tot_len or ipv6_hdr->payload_len, and get confused by lower-layer padding. In the normal IPv4 receive path, ip_rcv() trims the packet to ip_hdr->tot_len before invoking netfilter hooks. In the IPv6 receive path, ip6_rcv() does the same using ipv6_hdr->payload_len. Similarly in the br_netfilter receive path, br_validate_ipv4() and br_validate_ipv6() trim the packet to the L3 length before invoking netfilter hooks. Currently in the OVS conntrack receive path, ovs_ct_execute() pulls the skb to the L3 header but does not trim it to the L3 length before calling nf_conntrack_in(NF_INET_PRE_ROUTING). When nf_conntrack_proto_tcp encounters a packet with lower-layer padding, nf_ip_checksum() fails causing a "nf_ct_tcp: bad TCP checksum" log message. While extra zero bytes don't affect the checksum, the length in the IP pseudoheader does. That length is based on skb->len, and without trimming, it doesn't match the length the sender used when computing the checksum. In ovs_ct_execute(), trim the skb to the L3 length before higher-layer processing. Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31openvswitch: meter: Use 64-bit arithmetic instead of 32-bitGustavo A. R. Silva
Add suffix LL to constant 1000 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type long long int (64 bits, signed). The expression (band->burst_size + band->rate) * 1000 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1461563 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25openvswitch: add erspan version I and II supportWilliam Tu
The patch adds support for openvswitch to configure erspan v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added to uapi as a binary blob to support all ERSPAN v1 and v2's fields. Note that Previous commit "openvswitch: Add erspan tunnel support." was reverted since it does not design properly. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18flow_netlink: Remove unneeded semicolonsChristopher Díaz Riveros
Trivial fix removes unneeded semicolons after if blocks. This issue was detected by using the Coccinelle software. Signed-off-by: Christopher Díaz Riveros <chrisadr@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15Revert "openvswitch: Add erspan tunnel support."William Tu
This reverts commit ceaa001a170e43608854d5290a48064f57b565ed. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr should be designed as a nested attribute to support all ERSPAN v1 and v2's fields. The current attr is a be32 supporting only one field. Thus, this patch reverts it and later patch will redo it using nested attr. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: ovs: remove unused hardirq.hYang Shi
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by openvswitch at all. So, remove the unused hardirq.h. Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: dev@openvswitch.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02openvswitch: drop unneeded newlineJulia Lawall
OVS_NLERR prints a newline at the end of the message string, so the message string does not need to include a newline explicitly. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21openvswitch: Fix pop_vlan action for double tagged framesEric Garver
skb_vlan_pop() expects skb->protocol to be a valid TPID for double tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop() shift the true ethertype into position for us. Fixes: 5108bbaddc37 ("openvswitch: add processing of L3 packets") Signed-off-by: Eric Garver <e@erig.me> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: erspan: refactor existing erspan codeWilliam Tu
The patch refactors the existing erspan implementation in order to support erspan version 2, which has additional metadata. So, in stead of having one 'struct erspanhdr' holding erspan version 1, breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02openvswitch: do not propagate headroom updates to internal portPaolo Abeni
After commit 3a927bc7cf9d ("ovs: propagate per dp max headroom to all vports") the need_headroom for the internal vport is updated accordingly to the max needed headroom in its datapath. That avoids the pskb_expand_head() costs when sending/forwarding packets towards tunnel devices, at least for some scenarios. We still require such copy when using the ovs-preferred configuration for vxlan tunnels: br_int / \ tap vxlan (remote_ip:X) br_phy \ NIC where the route towards the IP 'X' is via 'br_phy'. When forwarding traffic from the tap towards the vxlan device, we will call pskb_expand_head() in vxlan_build_skb() because br-phy->needed_headroom is equal to tun->needed_headroom. With this change we avoid updating the internal vport needed_headroom, so that in the above scenario no head copy is needed, giving 5% performance improvement in UDP throughput test. As a trade-off, packets sent from the internal port towards a tunnel device will now experience the head copy overhead. The rationale is that the latter use-case is less relevant performance-wise. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30openvswitch: use ktime_get_ts64() instead of ktime_get_ts()Arnd Bergmann
timespec is deprecated because of the y2038 overflow, so let's convert this one to ktime_get_ts64(). The code is already safe even on 32-bit architectures, since it uses monotonic times. On 64-bit architectures, nothing changes, while on 32-bit architectures this avoids one type conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-26openvswitch: fix the incorrect flow action alloc sizezhangliping
If we want to add a datapath flow, which has more than 500 vxlan outputs' action, we will get the following error reports: openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Actions may not be safe on all matching packets ... ... It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but this is not the root cause. For example, for a vxlan output action, we need about 60 bytes for the nlattr, but after it is converted to the flow action, it only occupies 24 bytes. This means that we can still support more than 1000 vxlan output actions for a single datapath flow under the the current 32k max limitation. So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we shouldn't report EINVAL and keep it move on, as the judgement can be done by the reserve_sfa_size. Signed-off-by: zhangliping <zhangliping02@baidu.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-27net: openvswitch: datapath: fix data type in queue_gso_packetsGustavo A. R. Silva
gso_type is being used in binary AND operations together with SKB_GSO_UDP. The issue is that variable gso_type is of type unsigned short and SKB_GSO_UDP expands to more than 16 bits: SKB_GSO_UDP = 1 << 16 this makes any binary AND operation between gso_type and SKB_GSO_UDP to be always zero, hence making some code unreachable and likely causing undesired behavior. Fix this by changing the data type of variable gso_type to unsigned int. Addresses-Coverity-ID: 1462223 Fixes: 0c19f846d582 ("net: accept UFO datagrams from tuntap and packet") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-24net: accept UFO datagrams from tuntap and packetWillem de Bruijn
Tuntap and similar devices can inject GSO packets. Accept type VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively. Processes are expected to use feature negotiation such as TUNSETOFFLOAD to detect supported offload types and refrain from injecting other packets. This process breaks down with live migration: guest kernels do not renegotiate flags, so destination hosts need to expose all features that the source host does. Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677. This patch introduces nearly(*) no new code to simplify verification. It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP insertion and software UFO segmentation. It does not reinstate protocol stack support, hardware offload (NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception of VIRTIO_NET_HDR_GSO_UDP packets in tuntap. To support SKB_GSO_UDP reappearing in the stack, also reinstate logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD by squashing in commit 939912216fa8 ("net: skb_needs_check() removes CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1 ("net: avoid skb_warn_bad_offload false positives on UFO"). (*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id, ipv6_proxy_select_ident is changed to return a __be32 and this is assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted at the end of the enum to minimize code churn. Tested Booted a v4.13 guest kernel with QEMU. On a host kernel before this patch `ethtool -k eth0` shows UFO disabled. After the patch, it is enabled, same as on a v4.13 host kernel. A UFO packet sent from the guest appears on the tap device: host: nc -l -p -u 8000 & tcpdump -n -i tap0 guest: dd if=/dev/zero of=payload.txt bs=1 count=2000 nc -u 192.16.1.1 8000 < payload.txt Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds, packets arriving fragmented: ./with_tap_pair.sh ./tap_send_ufo tap0 tap1 (from https://github.com/wdebruij/kerneltools/tree/master/tests) Changes v1 -> v2 - simplified set_offload change (review comment) - documented test procedure Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com> Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_startGustavo A. R. Silva
It seems that the intention of the code is to null check the value returned by function genlmsg_put. But the current code is null checking the address of the pointer that holds the value returned by genlmsg_put. Fix this by properly null checking the value returned by function genlmsg_put in order to avoid a pontential null pointer dereference. Addresses-Coverity-ID: 1461561 ("Dereference before null check") Addresses-Coverity-ID: 1461562 ("Dereference null return value") Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14openvswitch: Using kfree_rcu() to simplify the codeWei Yongjun
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14openvswitch: Make local function ovs_nsh_key_attr_size() staticWei Yongjun
Fixes the following sparse warnings: net/openvswitch/flow_netlink.c:340:8: warning: symbol 'ovs_nsh_key_attr_size' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14openvswitch: Fix return value check in ovs_meter_cmd_features()Wei Yongjun
In case of error, the function ovs_meter_cmd_reply_start() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13openvswitch: Add meter action supportAndy Zhou
Implements OVS kernel meter action support. Signed-off-by: Andy Zhou <azhou@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>