summaryrefslogtreecommitdiff
path: root/include/scsi/libfcoe.h
AgeCommit message (Collapse)Author
2016-07-20fcoe: implement FIP VLAN responderHannes Reinecke
When running in VN2VN mode there is no central instance which would send out any FIP VLAN discovery notifications. So this patch adds a new sysfs attribute 'fip_vlan_responder' which will activate a FIP VLAN discovery responder. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-13fcoe: use enum for fip_modeHannes Reinecke
The FIP mode is independent on the FIP state machine, so use a separate enum for that instead of overloading it with state machine values. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-12fcoe: convert to kworkerSebastian Andrzej Siewior
The driver creates its own per-CPU threads which are updated based on CPU hotplug events. It is also possible to use kworkers and remove some of the kthread infrastrucure. The code checked ->thread to decide if there is an active per-CPU thread. By using the kworker infrastructure this is no longer possible (or required). The thread pointer is saved in `kthread' instead of `thread' so anything trying to use thread is caught by the compiler. Currently only the bnx2fc driver is using struct fcoe_percpu_s and the kthread member. After a CPU went offline, we may still enqueue items on the "offline" CPU. This isn't much of a problem. The work will be done on a random CPU. The allocated crc_eof_page page won't be cleaned up. It is probably expected that the CPU comes up at some point so it should not be a problem. The crc_eof_page memory is released of course once the module is removed. This patch was only compile-tested due to -ENODEV. Cc: Vasu Dev <vasu.dev@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: fcoe-devel@open-fcoe.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2013-10-11libfcoe: Make fcoe_sysfs optional / fix fnic NULL exceptionRobert Love
fnic doesn't use any of the create/destroy/enable/disable interfaces either from the (legacy) module paramaters or the (new) fcoe_sysfs interfaces. When fcoe_sysfs was introduced fnic wasn't changed since it wasn't using the interfaces. libfcoe incorrectly assumed that that all of its users were using fcoe_sysfs and when adding and deleting FCFs would assume the existance of a fcoe_ctlr_device. fnic was not allocating this structure because it doesn't care about the standard user interfaces (fnic starts on link only). If/When libfcoe tried to use the fcoe_ctlr_device's lock for the first time a NULL pointer exception would be triggered. Since fnic doesn't care about sysfs or user interfaces, the solution is to drop libfcoe's assumption that all drivers are using fcoe_sysfs. This patch accomplishes this by changing some of the structure relationships. We need a way to determine when a LLD is using fcoe_sysfs or not and we can do that by checking for the existance of the fcoe_ctlr_device. Prior to this patch, it was assumed that the fcoe_ctlr structure was allocated with the fcoe_ctlr_device and immediately followed it in memory. To reach the fcoe_ctlr_device we would simply go back in memory from the fcoe_ctlr to get the fcoe_ctlr_device. Since fnic doesn't allocate the fcoe_ctlr_device, we cannot keep that assumption. This patch adds a pointer from the fcoe_ctlr to the fcoe_ctlr_device. For bnx2fc and fcoe we will continue to allocate the two structures together, but then we'll set the ctlr->cdev pointer to point at the fcoe_ctlr_device. fnic will not change and will continue to allocate the fcoe_ctlr itself, and ctlr->cdev will remain NULL. When libfcoe adds fcoe_fcf's to the fcoe_ctlr it will check if ctlr->cdev is set and only if so will it continue to interact with fcoe_sysfs. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Hiral Patel <hiralpat@cisco.com>
2012-12-14libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesbYi Zou
Similarly they can be moved into libfcoe instead of being private to fcoe now. Also add comments particularly on the term LESB to the corresponding function. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export itYi Zou
With the previous patch, fcoe_link_speed_update() can be moved into libfcoe and exported to used by fcoe, bnx2fc, and etc. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: add support to the get_netdev() for fcoe_interfaceYi Zou
Adds support to fcoe_port's newly added get_netdev fucntion pointer. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: prep work to start consolidate the usage of fcoe_netdevYi Zou
Currently, in the default kernel fcoe driver, it is needed to get to the underlying private per fcoe transport's private structure, e.g., fcoe_interface in fcoe.ko, and returns the associated netdev. The similar logic exists in other fcoe drivers, e.g., bnx2fc, so we add a function pointer into the common fcoe_port struct to allow individual fcoe transport implementaion (fcoe and bnx2fc) to get the corresponding netdev associated with a give lport. Then a inline fcoe_get_netdev() is added as part of libfcoe for all underlying fcoe transport drivers to use regardless of its individual fcoe transport driver, and also allows move more common code such as fcoe_link_speed_update or fcoe_ctlr_get_lesb to be in libfcoe, rather than specific to fcoe. This patch is a prep work that adds aforementioned fucntion pointer, and followed by the actual code changes to make use of it. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe, bnx2fc: Add new fcoe control interfaceRobert Love
This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-10-07[SCSI] fcoe: Fix write errors on NPIV portsNeerav Parikh
SCSI errors were generated while writing to LUNs connected via NPIV ports. Debugging this it was found that the FCoE packets transmitted via the NPIV ports were not tagged with correct user priority as negotiated with peer by DCB agent. This resulted in FCoE traffic going with priority zero(0) that did not have priority flow control (PFC) enabled for it. The initiator after transferring data to the target never saw any reply indicating the transfer was complete. This resulted in error recovery (ABTS) and SCSI command retries by the scsi-mid layer; eventually resulting in I/O errors. This patch fixes this issue by keeping the FCoE user priority information in the fcoe_interface instance that is common for both the physical port as well as NPIV ports connected to that physical port; instead of storing it in fcoe_port structure that has a per port instance. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Acked-by: Yi Zou <yi.zou@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] fcoe, bnx2fc, libfcoe: SW FCoE and bnx2fc use FCoE SyfsRobert Love
This patch has the SW FCoE driver and the bnx2fc driver make use of the new fcoe_sysfs API added earlier in this patch series. After this patch a fcoe_ctlr_device is allocated with private data in this order. +------------------+ +------------------+ | fcoe_ctlr_device | | fcoe_ctlr_device | +------------------+ +------------------+ | fcoe_ctlr | | fcoe_ctlr | +------------------+ +------------------+ | fcoe_interface | | bnx2fc_interface | +------------------+ +------------------+ libfcoe also takes part in this new model since it discovers and manages fcoe_fcf instances. The memory allocation is different for FCFs. I didn't want to impact libfcoe's fcoe_fcf processing, so this patch creates fcoe_fcf_device instances for each discovered fcoe_fcf. The two are paired using a (void * priv) member of the fcoe_ctlr_device. This allows libfcoe to continue maintaining its list of fcoe_fcf instances and simply attaches and detaches them from existing or new fcoe_fcf_device instances. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] libfcoe: Add fcoe_sysfsRobert Love
This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] fcoe: Allocate fcoe_ctlr with fcoe_interface, not as a memberRobert Love
Currently the fcoe_ctlr associated with an interface is allocated as a member of struct fcoe_interface. This causes problems when attempting to use the new fcoe_sysfs APIs which allow us to allocate the fcoe_interface as private data to the fcoe_ctlr_device instance. The problem is that libfcoe wants to be able use pointer math to find a fcoe_ctlr's fcoe_ctlr_device as well as finding a fcoe_ctlr_device's assocated fcoe_ctlr. To do this we need to allocate the fcoe_ctlr_device, with private data for the LLD. The private data contains the fcoe_ctlr and its private data is the fcoe_interface. This patch only allocates the fcoe_interface with the fcoe_ctlr, the fcoe_ctlr_device will be added in a later patch, which will complete the below diagram- +------------------+ | fcoe_ctlr_device | +------------------+ | fcoe_ctlr | +------------------+ | fcoe_interface | +------------------+ This prep work will allow us to go from a fcoe_ctlr_device instance to its fcoe_ctlr as well as from a fcoe_ctlr to its fcoe_ctlr_device once the fcoe_sysfs API is in use (later patches in this series). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] libfcoe: Support extra MAC descriptor to be used as FCoE MACBhanu Prakash Gollapudi
Some switch implementations (eg., HP virtual connect FlexFabric) send two MAC descriptors in FIP FLOGI response, with first MAC descriptor (granted_mac) used as FPMA, and the second one (fcoe_mac) used as destination address for sending/receiving FCoE packets. fip_mac continues to be used for FIP traffic. This patch introduces fcoe_mac in fcoe_fcf structure. For regular switches, both fcoe_mac and fip_mac will be the same. For the switches that send additional MAC descriptor, fcoe_mac is updated. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] fcoe: fix fcoe in a DCB environment by adding DCB notifiers to set ↵john fastabend
skb priority Use DCB notifiers to set the skb priority to allow packets to be steered and tagged correctly over DCB enabled drivers that setup traffic classes. This allows queue_mapping() routines to be removed in these drivers that were previously inspecting the ethertype of every skb to mark FCoE/FIP frames. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] fcoe,libfcoe: Move common code for fcoe_get_lesb to fcoe_transportBhanu Prakash Gollapudi
Except for obtaining the netdev from lport, fcoe_get_lesb is the common code for the LLDs. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] fcoe: Move common functions to fcoe_transport libraryBhanu Prakash Gollapudi
Export fcoe_get_wwn, fcoe_validate_vport_create and fcoe_wwn_to_str so that all LLDs can use these common function. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-02-28[SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.hBhanu Prakash Gollapudi
both fcoe and bnx2fc drivers can access the common definition of FCOE_MTU. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] libfcoe: Move common code from fcoe to libfcoe moduleBhanu Prakash Gollapudi
To facilitate LLDDs to reuse the code, skb queue related functions are moved to libfcoe, so that both fcoe and bnx2fc drivers can use them. The common structures fcoe_port, fcoe_percpu_s are moved to libfcoe. fcoe_port will now have an opaque pointer that points to corresponding driver's interface structure. Also, fcoe_start_io and fcoe_fc_crc are moved to libfcoe. As part of this change, fixed fcoe_start_io to return ENOMEM if skb_clone fails. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] libfcoe: add fcoe_transport structure defines to include/scsi/libfcoe.hYi Zou
add the fcoe_transport struct to the common libfcoe.h header so all fcoe transport provides can use it to attach itself as an fcoe transport. This is the header part, and the next patch will be the transport code itself. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] libfcoe: retry rejected FLOGI to another FCF if possibleJoe Eykholt
Switches using multiple-FCFs may reject FLOGI in order to balance the load between multiple FCFs. Even though the FCF was available, it may have more load at the point we actually send the FLOGI. If the FLOGI fails, select a different FCF if possible, among those with the same priority. If no other FCF is available, just deliver the reject to libfc for retry. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint supportJoe Eykholt
The FC-BB-6 committee is proposing a new FIP usage model called VN_port to VN_port mode. It allows VN_ports to discover each other over a loss-free L2 Ethernet without any FCF or Fibre-channel fabric services. This is point-to-multipoint. There is also a variant of this called point-to-point which provides for making sure there is just one pair of ports operating over the Ethernet fabric. We add these new states: VNMP_START, _PROBE1, _PROBE2, _CLAIM, and _UP. These usually go quickly in that sequence. After waiting a random amount of time up to 100 ms in START, we select a pseudo-random proposed locally-unique port ID and send out probes in states PROBE1 and PROBE2, 100 ms apart. If no probe responses are heard, we proceed to CLAIM state 400 ms later and send a claim notification. We wait another 400 ms to receive claim responses, which give us a list of the other nodes on the network, including their FC-4 capabilities. After another 400 ms we go to VNMP_UP state and should start interoperating with any of the nodes for whic we receivec claim responses. More details are in the spec.j Add the new mode as FIP_MODE_VN2VN. The driver must specify explicitly that it wants to operate in this mode. There is no automatic detection between point-to-multipoint and fabric mode, and the local port initialization is affected, so it isn't anticipated that there will ever be any such automatic switchover. It may eventually be possible to have both fabric and VN2VN modes on the same L2 network, which may be done by two separate local VN_ports (lports). When in VN2VN mode, FIP replaces libfc's fabric-oriented discovery module with its own simple code that adds remote ports as they are discovered from incoming claim notifications and responses. These hooks are placed by fcoe_disc_init(). A linear list of discovered vn_ports is maintained under the fcoe_ctlr struct. It is expected to be short for now, and accessed infrequently. It is kept under RCU for lock-ordering reasons. The lport and/or rport mutexes may be held when we need to lookup a fcoe_vnport during an ELS send. Change fcoe_ctlr_encaps() to lookup the destination vn_port in the list of peers for the destination MAC address of the FIP-encapsulated frame. Add a new function fcoe_disc_init() to initialize just the discovery portion of libfcoe for VN2VN mode. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify modeJoe Eykholt
There are three modes that libfcoe currently supports, and a new one is coming. Change the fcoe_ctlr_init() interface to add the mode desired. This should not change any functionality. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] libfcoe: convert FIP to lock with mutex instead of spin lockJoe Eykholt
It turns out most of the FIP work is now done from worker threads or process context now, so there's no need to use a spin lock. Change to use mutex instead of spin lock and delayed_work instead of a timer. This will make it nicer for the VN_port to VN_port feature that will interact more with the libfc layers requiring that spinlocks not be held. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] fcoe: adds src and dest mac address checking for fcoe framesVasu Dev
This is per FC-BB-5 Annex-D recommendation and per that if address checking fails then drop the frame. FIP code paths are already doing this so only needed for fcoe frames. The src address checking is limited to only fip mode since this might break non-fip mode used in p2p due to used OUI based addressing in some p2p code paths, going forward FIP will be the only mode, therefore limited this to only FIP mode so that it won't break non-fip p2p mode for now. -v2 Removes FCOE packet type checking since fcoe_rcv is registered to receive only FCoE type packets from netdev and it is already checked by netdev. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe.Vasu Dev
No reason to restrict CDB size to 12 bytes in fcoe, so increased to 16 so that 16 bytes SCSI CDB doesn't fail. Uses common define to set max_cmd_len for fcoe and fnic, fnic is already setting max_cmd_len to 16. sg_readcap -l fails without this fix. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] libfcoe: eliminate unused link and last_link fieldsJoe Eykholt
The link and last_link fields in the fcoe_ctlr struct are no longer useful, since they are always set to the same value, and FIP always calls libfc to pass link information to the lport. Eliminate those fields and rename link_work to timer_work, since it no longer has any link change work to do. Thanks to Brian Uchino for discovering this issue. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: add checking disable flag in FIP_FKA_ADVYi Zou
When the D bit is set if the FKA_ADV_Period of the FIP Discovery Advertisement, the ENode should not transmit period ENode FIP Keep Alive and VN_Port FIP Keep Alive (FC-BB-5 Rev2, 7.8.3.13). Note that fcf->flags is taken directly from the fip_header, I am claiming one bit for the purpose of the FIP_FKA_Period D bit as FIP_FL_FK_ADV_B, and use FIP_HEADER_FLAGS as bitmask for bits used in fip_header. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: fcoe: simplify receive FLOGI responseJoe Eykholt
There was a locking problem where the fip->lock was held during the call to update_mac(). The rtnl_lock() must be taken before the fip->lock, not the other way around. This fixes that. Now that fcoe_ctlr_recv_flog() is called only from the response handler to a FLOGI request, some checking can be eliminated. Instead of calling update_mac(), just fill in the granted_mac address for the passed-in frame (skb). Eliminate the passed-in source MAC address since it is also in the skb. Also, in fcoe, call fcoe_set_src_mac() directly instead of going thru the fip function pointer. This will generate less code. Then, since fip isn't needed for LOGO response, use lport as the arg. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: FIP should report link to libfc whether selected or notJoe Eykholt
The fnic driver with FIP is reporting link up, even though it's down. When the interface is shut down by the switch, we receive a clear virtual link, and set the state reported to libfc as down, although we still report it up. Clearly wrong. That causes the subsequent link down event not to be reported, and /sys shows the host "Online". Currently, in FIP mode, if an FCF times out, then link to libfc is reported as down, to stop FLOGIs. That interferes with the LLD link down being reported. Users really need to know the physical link information, to diagnose cabling issues, so physical link status should be reported to libfc. If the selected FCF needs to be reported, that should be done separately, in a later patch. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: Allow FIP to be disabled by the driverJoe Eykholt
Allow FIP to be disabled by the driver for devices that want to use libfcoe in non-FIP mode. The driver merely sets the fcoe_ctlr mode to the state which should be entered when the link comes up. The default is auto. No change is needed for fcoe.c which uses auto mode. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: formatting and comment cleanupsRobert Love
Ensures that there are kernel-doc style comments for all routines and structures. There were also a few instances of fc_lport's named 'lp' which were switched to 'lport' as per the libfc/libfcoe/fcoe naming convention. Also, emacs 'indent-region' and 'tabify' were ran on libfcoe.c. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe, fcoe: libfcoe NPIV supportChris Leech
The FIP code in libfcoe needed several changes to support NPIV 1) dst_src_addr needs to be managed per-n_port-ID for FPMA fabrics with NPIV enabled. Managing the MAC address is now handled in fcoe, with some slight changes to update_mac() and a new get_src_addr() function pointer. 2) The libfc elsct_send() hook is used to setup FCoE specific response handlers for FIP encapsulated ELS exchanges. This lets the FCoE specific handling know which VN_Port the exchange is for, and doesn't require tracking OX_IDs. It might be possible to roll back to the full FIP frame in these, but for now I've just stashed the contents of the MAC address descriptor in the skb context block for later use. Also, because fcoe_elsct_send() just passes control on to fc_elsct_send(), all transmits still come through the normal frame_send() path. 3) The NPIV changes added a mutex hold in the keep alive sending, the lport mutex is protecting the vport list. We can't take a mutex from a timer, so move the FIP keep alive logic to the link work struct. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-05-17fcoe: adds spma mode supportVasu Dev
If we can find a type NETDEV_HW_ADDR_T_SAN mac address from the corresponding netdev for a fcoe interface then sets up added the fc->ctlr.spma flag and stores spma mode address in ctl_src_addr. In case the spma flag is set then:- 1. Adds spma mode MAC address in ctl_src_addr as secondary MAC address, the FLOGI for FIP and pre-FIP will go out using this address. 2. Cleans up stored spma MAC address in ctl_src_addr in fcoe_netdev_cleanup. 3. Sets up spma bit in fip_flags for FIP solicitations along with exiting FPMA bit setting. 4. Initialize the FLOGI FIP MAC descriptor to stored spma MAC address in ctl_src_addr. This is used as proposed FCoE MAC address from initiator along with both SPMA and FPMA bit set in FIP solicitation, in response the switch may grant any FPMA or SPMA mode MAC address to initiator. Removes FIP descriptor type checking against ELS type ELS_FLOGI in fcoe_ctlr_encaps to update a FIP MAC descriptor, instead now checks against FIP_DT_FLOGI. I've tested this with available FPMA-only FCoE switch but since data_src_addr is updated using same old code for both FPMA and SPMA modes with FIP or pre-FIP links, so added SPMA mode will work with SPMA-only switch also provided that switch grants a valid MAC address. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-03[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.Joe Eykholt
FIP is the new standard way to discover Fibre-Channel Forwarders (FCFs) by sending solicitations and listening for advertisements from FCFs. It also provides for keep-alives and period advertisements so that both parties know they have connectivity. If the FCF loses connectivity to the storage fabric, it can send a Link Reset to inform the E_node. This version is also compatible with pre-FIP implementations, so no configured selection between FIP mode and non-FIP mode is required. We wait a couple seconds after sending the initial solicitation and then send an old-style FLOGI. If we receive any FIP frames, we use FIP only mode. If the old FLOGI receives a response, we disable FIP mode. After every reset or link up, this determination is repeated. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe moduleVasu Dev
Removes no where used several inline functions prefixed with skb_* and be16_to_cpu. Moves fcoe module specific func prototypes to fcoe.c from libfcoe.h, moved only need for build. Adds fcoe module header file fcoe.h and then moves fcoe module specific fcoe_percpu_s and fcoe_softc to fcoe.h from libfcoe.h. Moves all defines from fcoe.c to fcoe.h since now fcoe module has its own header file fcoe.h. [jejb: removed EXPORT_SYMBOL_GPL(fcoe_fc_crc) which caused a section mismatch] Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: removes default sw transport code file fcoe_sw.cVasu Dev
Moves only required code from fcoe_sw.c to libfcoe.c towards having just one source file for fcoe module, this gets rid off default sw transport code in a separate fcoe_sw.c file. Very minor renaming along this move, dropped _sw_ or _SW_ use in names and replaced them by _if_ as a auxiliary interface functions. Now some of these funcs can be removed or merged with other func after fcoe transport is gone, but that should be in another patch to keep this patch simple. Now the libfcoe.c file name for fcoe module doesn't go along well, so the libfcoe.c file renaming to fcoe.c as the only single fcoe module file is done in next patch to keep this patch clean and small for review. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: prep work to completely remove fc_transport_fcoe codeVasu Dev
The fcoe transport code was added for generic FCoE transport infrastructure to allow additional offload related module loading on demand, this is not required anymore after recently added different offload approach by having offload related func ops in netdev. This patch removes fcoe transport related code use, calls functions directly between existing libfcoe.c and fcoe_sw.c for now, for example fcoe_sw_destroy and fcoe_sw_create calling. The fcoe_sw.c and libfcoe.c code will be further consolidated in later patches and then also the default fcoe sw transport code file fcoe_sw.c will be completely removed. The fcoe transport code files are completely removed in next patch to keep this patch simple for reviewing. [This patch is an update to a previous patch. This update resolves a build error as well as fixes a defect related to not calling fc_release_transport().] Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Use percpu kernel funcs for struct fcoe_percpu_sRobert Love
Convert fcoe_percpu array to use the per-cpu variables that the kernel provides. Use the kernel's functions to access this structure. The cpu member of the fcoe_percpu_s is no longer needed, so this patch removes it too. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Initialize all possilbe skb_queue(s) when module is loadedRobert Love
Currently the skb_queue is initialized every time the associated CPU goes online. This patch has libfcoe initializing the skb_queue for all possible CPUs when the module is loaded. This patch also re-orders some declarations in the fcoe_rcv() function so the structure declarations are grouped before the primitive declarations. Lastly, this patch converts all CPU indicies to use unsigned int since CPU indicies should not be negative. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] libfc: add support of large receive offload by ddp in fc_fcpYi Zou
When LLD supports direct data placement (ddp) for large receive of an scsi i/o coming into fc_fcp, we call into libfc_function_template's ddp_setup() to prepare for a ddp of large receive for this read I/O. When I/O is complete, we call the corresponding ddp_done() to get the length of data ddped as well as to let LLD do clean up. fc_fcp_ddp_setup()/fc_fcp_ddp_done() are added to setup and complete a ddped read I/O described by the given fc_fcp_pkt. They would call into corresponding ddp_setup/ddp_done implemented by the fcoe layer. Eventually, fcoe layer calls into LLD's ddp_setup/ddp_done provided through net_device Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: Out of order tx frames was causing several check condition SCSI ↵Vasu Dev
status frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapperRobert Love
Comment from "Andrew Morton <akpm@linux-foundation.org>" > +{ > + return (struct fcoe_softc *)lport_priv(lp); unneeded/undesirable cast of void*. There are probably zillions of instances of this - there always are. This whole inline function was unnecessary. The FCoE layer knows that it's data structure is stored in the lport private data, it can just access it from lport_priv(). Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] fcoe: Fibre Channel over EthernetRobert Love
Encapsulation protocol for running Fibre Channel over Ethernet interfaces. Creates virtual Fibre Channel host adapters using libfc. This layer is the LLD to the scsi-ml. It allocates the Scsi_Host, utilizes libfc for Fibre Channel protocol processing and interacts with netdev to send/receive Ethernet packets. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>