summaryrefslogtreecommitdiff
path: root/include/linux/spi
AgeCommit message (Collapse)Author
2015-11-10Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "Again we have a sizable (but not huge) cleanup branch with a net delta of about -3k lines. Main contents here is: - A bunch of development/cleanup of a few PXA boards - Removal of bockw platforms on shmobile, since the platform has now gone completely multiplatform. Whee! - move of the 32kHz timer on OMAP to a proper timesource - Misc cleanup of older OMAP material (incl removal of one board file) - Switch over to new common PWM lookup support for several platforms There's also a handful of other cleanups across the tree, but the above are the major pieces" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits) ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs ARM: DRA7: hwmod data: Remove spinlock hwmod addrs ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data ARM: Remove __ref on hotplug cpu die path ARM: Remove open-coded version of IRQCHIP_DECLARE arm: omap2: board-generic: use omap4_local_timer_init for AM437x ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data ARM: OMAP: Remove duplicated operand in OR operation clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode ARM: pxa: raumfeld: make some variables static ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c ARM: OMAP2+: Rename cpu_is macros to soc_is arm: omap2: timer: limit hwmod usage to non-DT boots arm: omap2+: select 32k clocksource driver clocksource: add TI 32.768 Hz counter driver arm: omap2: timer: rename omap_sync32k_timer_init() arm: omap2: timer: always call clocksource_of_init() when DT arm: omap2: timer: move realtime_counter_init() around ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-11-04Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/bcm63xx', ↵Mark Brown
'spi/topic/bfin-sport', 'spi/topic/bfin5xx' and 'spi/topic/bitbang' into spi-next
2015-10-28spi: Add THIS_MODULE to spi_driver in SPI coreAndrew F. Davis
Add spi_register_driver helper macro that adds THIS_MODULE to spi_driver for the registering driver. We rename and modify the existing spi_register_driver to enable this. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23Merge tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux into next/cleanupOlof Johansson
This is the pxa changes for v4.4 cycle. This cycle is bigger than usual : - magician was greatly enhanced (new IPs discovered, ...) - almost all legacy board files have been updated to the new PWM API (mostly for backlight control) - some minor fixes in raumfeld, z2 and mioa701 * tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux: (44 commits) ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode ARM: pxa: raumfeld: make some variables static ARM: pxa: magician: Remove pdata for pasic3-leds ARM: pxa: magician: Add support for PXA27x UDC ARM: pxa: magician: Add support for MAX1587A Vcore regulator ARM: pxa: magician: Change comments to be more informative ARM: pxa: magician: Move platform_add_devices() to the end of magician_init() ARM: pxa: magician: Add missing regulator for PWM backlight ARM: pxa: magician: Add debug message for backlight brightness function ARM: pxa: magician: Remove definition of the STUART port ARM: pxa: magician: Fix wrongly enabled USB host ports ARM: pxa: magician: Fix support for Intel Strata NOR Flash ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers ARM: pxa: magician: Fix and add charging detection functions ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz ARM: pxa: magician: Rename charger cable detection EGPIOs ARM: pxa: magician: Optimize powerup delays for Samsung LCD ARM: pxa: magician: Rename abstract LCD GPIOs ARM: pxa: magician: Add new discovered EGPIO pins ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-24spi: fix kernel-doc warnings about missing return desc in spi.hJavier Martinez Canillas
When building docs with make htmldocs, warnings about not having a description for the return value are reported, i.e: warning: No description found for return value of 'spi_write' Fix these by following the kernel-doc conventions explained in Documentation/kernel-doc-nano-HOWTO.txt. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24Merge branches 'topic/core' and 'topic/stats' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-doc
2015-09-20ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_masterJarkko Nikula
Use for struct pxa2xx_spi_master clock_enable field was removed years ago from the pxa2xx-spi driver by the commit 2f1a74e5a2de ("[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()"). Therefore remove it from structure definition, documentation and from couple affected board files. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-19spi: add transfer histogram statistics via sysfsMartin Sperl
report transfer sizes as a histogram via the following files: /sys/class/spi_master/spi*/statistics/transfer_bytes_histo_* /sys/class/spi_master/spi*/spi*.*/statistics/transfer_bytes_histo_* Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17spi: bitbang: Replace spinlock by mutexNicolas Boichat
chipselect (in the case of spi-gpio: spi_gpio_chipselect, which calls gpiod_set_raw_value_cansleep) can sleep, so we should not hold a spinlock while calling it from spi_bitbang_setup. This issue was introduced by this commit, which converted spi-gpio to cansleep variants: d9dda5a191 "spi: spi-gpio: Use 'cansleep' variants to access GPIO" Replacing the lock variable by a mutex fixes the issue: This is safe as all instances where the lock is used are called from contexts that can sleep. Finally, update spi-ppc4xx and and spi-s3c24xx to use mutex functions, as they directly hold the lock for similar purpose. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-16spi: fix kernel-doc warnings in spi.hGeliang Tang
Fix the following 'make htmldocs' warnings: .//include/linux/spi/spi.h:71: warning: No description found for parameter 'lock' .//include/linux/spi/spi.h:71: warning: Excess struct/union/enum/typedef member 'clock' description in 'spi_statistics' Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07spi: expose spi_master and spi_device statistics via sysfsMartin Sperl
per spi-master statistics accessible as: /sys/class/spi_master/spi*/statistics/* per spi-device statistics accessible via: /sys/class/spi_master/spi*/spi*.*/statistics/* The following statistics are exposed as separate "files" inside these directories: * messages number of spi_messages * transfers number of spi_transfers * bytes number of bytes transferred * bytes_rx number of bytes transmitted * bytes_tx number of bytes received * errors number of errors encounterd * timedout number of messages that have timed out * spi_async number of spi_messages submitted using spi_async * spi_sync number of spi_messages submitted using spi_sync * spi_sync_immediate number of spi_messages submitted using spi_sync, that are handled immediately without a context switch to the spi_pump worker-thread Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-31cc2520: fix CC2591 handlingVarka Bhadram
This patch changes tha way of handling of cc2591-cc2520 combination by moving amplified variable from platform data to private data. This will be useful in other sections like tx power support. Signed-off-by: Varka Bhadram <varkab@cdac.in> Cc: Brad Campbell <bradjc5@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
2015-04-11Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/pl022', 'spi/topic/pm' and 'spi/topic/pxa2xx' into spi-next
2015-04-11Merge remote-tracking branches 'spi/topic/blackfin', 'spi/topic/cadence', ↵Mark Brown
'spi/topic/dw' and 'spi/topic/err' into spi-next
2015-04-11Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm2385', ↵Mark Brown
'spi/topic/bcm2835', 'spi/topic/bcm53xx' and 'spi/topic/bitbang' into spi-next
2015-04-07spi: Make master->handle_err() callback optional to avoid crashesGeert Uytterhoeven
If a driver doesn't implement the master->handle_err() callback and an SPI transfer fails, the kernel will crash with a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0003000 [00000000] *pgd=80000040004003, *pmd=00000000 Internal error: Oops: 80000206 [#1] SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc7-koelsch-05861-g1fc9fdd4add4f783 #1046 Hardware name: Generic R8A7791 (Flattened Device Tree) task: eec359c0 ti: eec54000 task.ti: eec54000 PC is at 0x0 LR is at spi_transfer_one_message+0x1cc/0x1f0 Make the master->handle_err() callback optional to avoid the crash. Also fix a spelling mistake in the callback documentation while we're at it. Fixes: b716c4ffc6a2b0bf ("spi: introduce master->handle_err() callback") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-18cc2520: Add support for CC2591 amplifier.Brad Campbell
The TI CC2521 is an RF power amplifier that is designed to interface with the CC2520. Conveniently, it directly interfaces with the CC2520 and does not require any pins to be connected to a microcontroller/processor. Adding a CC2591 increases the CC2520's range, which is useful for border router and other wall-powered applications. Using the CC2591 with the CC2520 requires configuring the CC2520 GPIOs that are connected to the CC2591 to correctly set the CC2591 into TX and RX modes. Further, TI recommends that the CC2520_TXPOWER and CC2520_AGCCTRL1 registers are set differently to maximize the CC2591's performance. These settings are covered in TI Application Note AN065. This patch adds an optional `amplified` field to the cc2520 entry in the device tree. If present, the CC2520 will be configured to operate with a CC2591. The expected pin mapping is: CC2520 GPIO0 --> CC2591 EN CC2520 GPIO5 --> CC2591 PAEN Signed-off-by: Brad Campbell <bradjc5@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cadence/macb.c Overlapping changes in macb driver, mostly fixes and cleanups in 'net' overlapping with the integration of at91_ether into macb in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08spi: Remove support for legacy PMLars-Peter Clausen
All SPI drivers have been converted from legacy suspend/resume callbacks to dev_pm_ops. So we can finally remove support for legacy PM from the SPI core. Since there aren't any special bus specific things to do during suspend/resume and since the PM core will automatically fallback directly to using the device's PM ops if no bus PM ops are specified there is no need to have any special SPI bus PM ops. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-06spi: introduce master->handle_err() callbackAndy Shevchenko
This callback would be useful to handle an error that occurs in the generic implementation of transfer_one_message(). The good candidate for this is to drain FIFO and / or to terminate DMA transfers when timeout happened. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-03spi: fix a typo in comment.Marcin Bis
alway -> always Signed-off-by: Marcin Bis <marcin@bis.org.pl> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-27at86rf230: add support for external xtal trimAlexander Aring
This patch adds support for setting the xtal trim register. Some at86rf2xx transceiver boards needs fine tuning the xtal capacitor. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-08Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pxa2xx', ↵Mark Brown
'spi/topic/qup', 'spi/topic/rockchip' and 'spi/topic/samsung' into spi-next
2015-02-08Merge remote-tracking branches 'spi/topic/img-spfi', 'spi/topic/imx', ↵Mark Brown
'spi/topic/inline', 'spi/topic/meson' and 'spi/topic/mxs' into spi-next
2015-02-08Merge remote-tracking branches 'spi/topic/falcon', 'spi/topic/fsf', ↵Mark Brown
'spi/topic/fsl', 'spi/topic/fsl-dspi' and 'spi/topic/gpio' into spi-next
2015-02-04spi: spi-pxa2xx: only include mach/dma.h for legacy DMARob Herring
Move the include of mach/dma.h to the legacy PXA DMA code where it is used. This enables building spi-pxa2xx on ARM64. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24spi: sh-msiof: Configure MSIOF sync signal timing in device treeYoshihiro Shimoda
The MSIOF controller has DTDL and SYNCDL in SITMDR1 register. So, this patch adds new properties like the following commit: d0fb47a5237d8b9576113568bacfd27892308b62 (spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Remove FSF mailing addressesJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-11spi: Pump transfers inside calling context for spi_sync()Mark Brown
If we are using the standard SPI message pump (which all drivers should be transitioning over to) then special case the message enqueue and instead of starting the worker thread to push messages to the hardware do so in the context of the caller if the controller is idle. This avoids a context switch in the common case where the controller has a single user in a single thread, for short PIO transfers there may be no need to context switch away from the calling context to complete the transfer. The code is a bit more complex than is desirable in part due to the need to handle drivers not using the standard queue and in part due to handling the various combinations of bus locking and asynchronous submission in interrupt context. It is still suboptimal since it will still wake the message pump for each transfer in order to schedule idling of the hardware and if multiple contexts are using the controller simultaneously a caller may end up pumping a message for some random other thread rather than for itself, and if the thread ends up deferring due to another context idling the hardware then it will just busy wait. It can, however, have the benefit of aggregating power up and down of the hardware when a caller performs a series of transfers back to back without any need for the use of spi_async(). Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24spi: core: Add spi_transfer_is_last() helperBeniamino Galvani
This adds the function spi_transfer_is_last() which can be used by drivers to know whether a given transfer is the last one in the current message. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-09-18spi/pxa2xx: Don't use slave_id of dma_slave_configMika Westerberg
That field has been deprecated in favour of getting the necessary information from ACPI/DT. However, we still need to deal systems that are PCI only (no ACPI to back up). In order to support such systems, we allow the DMA filter function and its corresponding parameter via pxa2xx_spi_master platform data. Then when the pxa2xx_spi_dma_setup() doesn't find the channel via ACPI, it falls back to use the given filter function. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-04gpio: mcp23s08 to support both device tree and platform dataSonic Zhang
Device tree is not enabled in some architecture where gpio driver mcp23s08 is still required. v2-changes: - Parse device tree properties into platform data other than individual variables. v3-changes: - Use of_node in gpio_chip device structure, because the struct device * always has an of_node which is NULL when OF is not used. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-30Merge remote-tracking branches 'spi/fix/au1550', 'spi/fix/davinci', ↵Mark Brown
'spi/fix/doc', 'spi/fix/dw', 'spi/fix/omap-mcspi', 'spi/fix/pxa2xx', 'spi/fix/rockchip' and 'spi/fix/rspi' into spi-linus
2014-08-13spi: Add missing kerneldoc bitsThierry Reding
These are all arguments or fields that got added without updating the kerneldoc comments. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-06-30spi: sh-msiof: Add DMA supportGeert Uytterhoeven
Add DMA support to the MSIOF driver using platform data. As MSIOF DMA is limited to 32-bit words (requiring byte/wordswapping for smaller wordsizes), and the group length is limited to 256 words, DMA is performed on two fixed pages, allocated and mapped at driver initialization time. Performance figures (in Mbps) on r8a7791/koelsch at different SPI clock frequencies for 1024-byte and 4096-byte transfers: 1024 bytes 4096 bytes - 3.25 MHz: PIO 2.1, DMA 2.6 | PIO 2.8, DMA 3.1 - 6.5 MHz: PIO 3.2, DMA 4.4 | PIO 5.0, DMA 5.9 - 13 MHz: PIO 4.2, DMA 6.6 | PIO 8.2, DMA 10.7 - 26 MHz: PIO 5.9, DMA 10.4 | PIO 12.4, DMA 18.4 Note that DMA is only faster than PIO for transfers that exceed the FIFO size (typically 64 words / 256 bytes). Also note that large transfers (larger than the group length for DMA, or larger than the FIFO size for PIO), should use cs-gpio (with the appropriate pinmux setup), as the hardware chipselect will be deasserted in between chunks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-22ieee802154: cc2520: adds driver for TI CC2520 radioVarka Bhadram
This patch adds the driver support for the cc2520 radio. Driver support: - Tx and Rx of IEEE-802.15.4 packets - Energy Detection on channel - Setting the Channel for the radio. [b/w 11 - 26 channels] - Start and Stop the radio - h/w address filtering Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-02Merge remote-tracking branches 'spi/topic/oom', 'spi/topic/pxa2xx', ↵Mark Brown
'spi/topic/rspi' and 'spi/topic/sirf' into spi-next
2014-06-02spi: rspi: Remove unused 16-bit DMA supportGeert Uytterhoeven
The 16-bit DMA support doesn't fit well within the SPI core DMA framework, as it needs to manage its own double-sized temporary buffers, for handling the interleaved data. Remove it, as there is no in-tree board code that sets rspi_plat_data.dma_width_16bit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-26at86rf230: use irq_get_trigger_typeAlexander Aring
This patch removes the platform data for the irq_type. We use instead the irq_get_trigger_type function to get these flags which should already configured by the interrupt controller. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14spi: convert spi-bfin-v3.c to a multiplatform driverScott Jiang
Spi v3 controller is not only used on Blackfin. So rename it and use ioread/iowrite api to make it work on other platform. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science -- mostly documentation and comment updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sparse: fix comment doc: fix double words isdn: capi: fix "CAPI_VERSION" comment doc: DocBook: Fix typos in xml and template file Bluetooth: add module name for btwilink driver core: unexport static function create_syslog_header mmc: core: typo fix in printk specifier ARM: spear: clean up editing mistake net-sysfs: fix comment typo 'CONFIG_SYFS' doc: Insert MODULE_ in module-signing macros Documentation: update URL to hfsplus Technote 1150 gpio: update path to documentation ixgbe: Fix format string in ixgbe_fcoe. Kconfig: Remove useless "default N" lines user_namespace.c: Remove duplicated word in comment CREDITS: fix formatting treewide: Fix typo in Documentation/DocBook mm: Fix warning on make htmldocs caused by slab.c ata: ata-samsung_cf: cleanup in header file idr: remove unused prototype of idr_free()
2014-03-30Merge remote-tracking branches 'spi/topic/altera', 'spi/topic/atmel', ↵Mark Brown
'spi/topic/au1550', 'spi/topic/bcm63xx', 'spi/topic/bcm63xx-hsspi', 'spi/topic/bfin5xx', 'spi/topic/bitbang' and 'spi/topic/bpw' into spi-next
2014-03-30Merge remote-tracking branch 'spi/topic/dma' into spi-nextMark Brown
2014-03-29spi: bitbang: Make spi_bitbang_stop() return voidAxel Lin
spi_bitbang_stop() never fails, so make it return void. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>