summaryrefslogtreecommitdiff
path: root/fs/udf/super.c
AgeCommit message (Collapse)Author
2016-05-19udf: Use correct partition reference number for metadataAlden Tondettar
UDF/OSTA terminology is confusing. Partition Numbers (PNs) are arbitrary 16-bit values, one for each physical partition in the volume. Partition Reference Numbers (PRNs) are indices into the the Partition Map Table and do not necessarily equal the PN of the mapped partition. The current metadata code mistakenly uses the PN instead of the PRN when mapping metadata blocks to physical/sparable blocks. Windows-created UDF 2.5 discs for some reason use large, arbitrary PNs, resulting in mount failure and KASAN read warnings in udf_read_inode(). For example, a NetBSD UDF 2.5 partition might look like this: PRN PN Type --- -- ---- 0 0 Sparable 1 0 Metadata Since PRN == PN, we are fine. But Windows could gives us: PRN PN Type --- ---- ---- 0 8192 Sparable 1 8192 Metadata So udf_read_inode() will start out by checking the partition length in sbi->s_partmaps[8192], which is obviously out of bounds. Fix this by creating a new field (s_phys_partition_ref) in struct udf_meta_data, referencing whatever physical or sparable map has the same partition number as the metadata partition. [JK: Add comment about s_phys_partition_ref, change its name] Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-04-26udf: Prevent stack overflow on corrupted filesystem mountAlden Tondettar
Presently, a corrupted or malicious UDF filesystem containing a very large number (or cycle) of Logical Volume Integrity Descriptor extent indirections may trigger a stack overflow and kernel panic in udf_load_logicalvolint() on mount. Replace the unnecessary recursion in udf_load_logicalvolint() with simple iteration. Set an arbitrary limit of 1000 indirections (which would have almost certainly overflowed the stack without this fix), and treat such cases as if there were no LVID. Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-04-25udf: Fix conversion of 'dstring' fields to UTF8Andrew Gabbasov
Commit 9293fcfbc1812a22ad5ce1b542eb90c1bbe01be1 ("udf: Remove struct ustr as non-needed intermediate storage"), while getting rid of 'struct ustr', does not take any special care of 'dstring' fields and effectively use fixed field length instead of actual string length, encoded in the last byte of the field. Also, commit 484a10f49387e4386bf2708532e75bf78ffea2cb ("udf: Merge linux specific translation into CS0 conversion function") introduced checking of the length of the string being converted, requiring proper alignment to number of bytes constituing each character. The UDF volume identifier is represented as a 32-bytes 'dstring', and needs to be converted from CS0 to UTF8, while mounting UDF filesystem. The changes in mentioned commits can in some cases lead to incorrect handling of volume identifier: - if the actual string in 'dstring' is of maximal length and does not have zero bytes separating it from dstring encoded length in last byte, that last byte may be included in conversion, thus making incorrect resulting string; - if the identifier is encoded with 2-bytes characters (compression code is 16), the length of 31 bytes (32 bytes of field length minus 1 byte of compression code), taken as the string length, is reported as an incorrect (unaligned) length, and the conversion fails, which in its turn leads to volume mounting failure. This patch introduces handling of 'dstring' encoded length field in udf_CS0toUTF8 function, that is used in all and only cases when 'dstring' fields are converted. Currently these cases are processing of Volume Identifier and Volume Set Identifier fields. The function is also renamed to udf_dstrCS0toUTF8 to distinctly indicate that it handles 'dstring' input. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-02-09udf: Remove struct ustr as non-needed intermediate storageAndrew Gabbasov
Although 'struct ustr' tries to structurize the data by combining the string and its length, it doesn't actually make much benefit, since it saves only one parameter, but introduces an extra copying of the whole buffer, serving as an intermediate storage. It looks quite inefficient and not actually needed. This commit gets rid of the struct ustr by changing the parameters of some functions appropriately. Also, it removes using 'dstring' type, since it doesn't make much sense too. Just using the occasion, add a 'const' qualifier to udf_get_filename to make consistent parameters sets. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-02-09udf: Adjust UDF_NAME_LEN to better reflect actual restrictionsAndrew Gabbasov
Actual name length restriction is 254 bytes, this is used in 'ustr' structure, and this is what fits into UDF File Ident structures. And in most cases the constant is used as UDF_NAME_LEN-2. So, it's better to just modify the constant to make it closer to reality. Also, in some cases it's useful to have a separate constant for the maximum length of file name field in CS0 encoding in UDF File Ident structures. Also, remove the unused UDF_PATH_LEN constant. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jan Kara <jack@suse.cz>
2016-01-22tree wide: use kvfree() than conditional kfree()/vfree()Tetsuo Handa
There are many locations that do if (memory_was_allocated_by_vmalloc) vfree(ptr); else kfree(ptr); but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory using is_vmalloc_addr(). Unless callers have special reasons, we can replace this branch with kvfree(). Please check and reply if you found problems. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: David Rientjes <rientjes@google.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Boris Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes and quota cleanups from Jan Kara: "Several UDF fixes and some minor quota cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Check output buffer length when converting name to CS0 udf: Prevent buffer overrun with multi-byte characters quota: constify qtree_fmt_operations structures udf: avoid uninitialized variable use udf: Fix lost indirect extent block udf: Factor out code for creating indirect extent udf: limit the maximum number of indirect extents in a row udf: limit the maximum number of TD redirections fs: make quota/dquot.c explicitly non-modular fs: make quota/netlink.c explicitly non-modular
2016-01-14kmemcg: account certain kmem allocations to memcgVladimir Davydov
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-14udf: limit the maximum number of TD redirectionsVegard Nossum
Filesystem fuzzing revealed that we could get stuck in the udf_process_sequence() loop. The maximum limit was chosen arbitrarily but fixes the problem I saw. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2015-08-20udf: Don't modify filesystem for read-only mountsJan Kara
When read-write mount of a filesystem is requested but we find out we can mount the filesystem only in read-only mode, we still modify LVID in udf_close_lvid(). That is both unnecessary and contrary to expectation that when we fall back to read-only mount we don't modify the filesystem. Make sure we call udf_close_lvid() only if we called udf_open_lvid() so that filesystem gets modified only if we verified we are allowed to write to it. Reported-by: Karel Zak <kzak@redhat.com> Signed-off-by: Jan Kara <jack@suse.com>
2015-05-21udf: fix udf_load_pvoldesc()Dan Carpenter
There are some missing braces here which means this function never succeeds. Fixes: e9d4cf411f75 ('udf: improve error management in udf_CS0toUTF8()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2015-05-18udf: improve error management in udf_CS0toUTF8()Fabian Frederick
udf_CS0toUTF8() now returns -EINVAL on error. udf_load_pvoldesc() and udf_get_filename() do the same. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-14udf: remove redundant buffer_head.h includesFabian Frederick
buffer_head.h was already included in udfdecl.h Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-02-05udf: use bool for doneFabian Frederick
variable 'done' is only used for true/false in loop. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-12udf: destroy sbi mutex in put_superFabian Frederick
Call mutex_destroy() on superblock mutex in udf_put_super() otherwise mutex debugging code isn't able to detect that mutex is used after being freed. (thanks to Jan Kara for complete definition). Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19udf: One function call less in udf_fill_super() after error detectionMarkus Elfring
The iput() function was called in up to three cases by the udf_fill_super() function during error handling even if the passed data structure element contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-19udf: Deletion of unnecessary checks before the function call "iput"Markus Elfring
The iput() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jan Kara <jack@suse.cz>
2014-10-09udf: Fix loading of special inodesJan Kara
Some UDF media have special inodes (like VAT or metadata partition inodes) whose link_count is 0. Thus commit 4071b9136223 (udf: Properly detect stale inodes) broke loading these inodes because udf_iget() started returning -ESTALE for them. Since we still need to properly detect stale inodes queried by NFS, create two variants of udf_iget() - one which is used for looking up special inodes (which ignores link_count == 0) and one which is used for other cases which return ESTALE when link_count == 0. Fixes: 4071b913622316970d0e1919f7d82b4403fec5f2 CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04udf: Make udf_read_inode() and udf_iget() return errorJan Kara
Currently __udf_read_inode() wasn't returning anything and we found out whether we succeeded reading inode by checking whether inode is bad or not. udf_iget() returned NULL on failure and inode pointer otherwise. Make these two functions properly propagate errors up the call stack and use the return value in callers. Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15udf: use linux/uaccess.hFabian Frederick
Fix checkpatch warning WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-04-07Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3 improvements, cleanups, reiserfs fix from Jan Kara: "various cleanups for ext2, ext3, udf, isofs, a documentation update for quota, and a fix of a race in reiserfs readdir implementation" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: fix race in readdir ext2: acl: remove unneeded include of linux/capability.h ext3: explicitly remove inode from orphan list after failed direct io fs/isofs/inode.c add __init to init_inodecache() ext3: Speedup WB_SYNC_ALL pass fs/quota/Kconfig: Update filesystems ext3: Update outdated comment before ext3_ordered_writepage() ext3: Update PF_MEMALLOC handling in ext3_write_inode() ext2/3: use prandom_u32() instead of get_random_bytes() ext3: remove an unneeded check in ext3_new_blocks() ext3: remove unneeded check in ext3_ordered_writepage() fs: Mark function as static in ext3/xattr_security.c fs: Mark function as static in ext3/dir.c fs: Mark function as static in ext2/xattr_security.c ext3: Add __init macro to init_inodecache ext2: Add __init macro to init_inodecache udf: Add __init macro to init_inodecache fs: udf: parse_options: blocksize check
2014-03-13fs: push sync_filesystem() down to the file system's remount_fs()Theodore Ts'o
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
2014-03-03udf: Add __init macro to init_inodecacheFabian Frederick
init_inodecache is only called by __init init_udf_fs. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-03-03fs: udf: parse_options: blocksize checkFabian Frederick
Both affs and isofs check for blocksize integrity during parse_options.Do the same thing for udf. Valid values : 512, 1024, 2048 or 4096 bytes. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2013-10-18udf: fix for pathetic mount times in case of invalid file systemPeter A. Felvegi
The UDF driver was not strict enough about checking the IDs in the VSDs when mounting, which resulted in reading through all the sectors of the block device in some unfortunate cases. Eg, trying to mount my uninitialized 200G SSD partition (all 0xFF bytes) took ~350 minutes to fail, because the code expected some of the valid IDs or a zero byte. During this, the mount couldn't be killed, sync from the cmdline blocked, and the machine froze into the shutdown. Valid filesystems (extX, btrfs, ntfs) were rejected by the mere accident of having a zero byte at just the right place in some of their sectors, close enough to the beginning not to generate excess I/O. The fix adds a hard limit on the VSD sector offset, adds the two missing VSD IDs, and stops scanning when encountering an invalid ID. Also replaced the magic number 32768 with a more meaningful #define, and supressed the bogus message about failing to read the first sector if no UDF fs was detected. Signed-off-by: Peter A. Felvegi <petschy@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-09-24udf: Fortify LVID loadingJan Kara
A user has reported an oops in udf_statfs() that was caused by numOfPartitions entry in LVID structure being corrupted. Fix the problem by verifying whether numOfPartitions makes sense at least to the extent that LVID fits into a single block as it should. Reported-by: Juergen Weigert <jw@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-07-31udf: Refuse RW mount of the filesystem instead of making it ROJan Kara
Refuse RW mount of udf filesystem. So far we just silently changed it to RO mount but when the media is writeable, block layer won't notice this change and thus will think device is used RW and will block eject button of the drive. That is unexpected by users because for non-writeable media eject button works just fine. Userspace mount(8) command handles this just fine and retries mounting with MS_RDONLY set so userspace shouldn't see any regression. Plus any tool mounting udf is likely confronted with the case of read-only media where block layer already refuses to mount the filesystem without MS_RDONLY set so our behavior shouldn't be anything new for it. Reported-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-07-31udf: Standardize return values in mount sequenceJan Kara
Change all function used in filesystem discovery during mount to user standard kernel return values - -errno on error, 0 on success instead of 1 on failure and 0 on success. This allows us to pass error number (not just failure / success) so we can abort device scanning earlier in case of errors like EIO or ENOMEM . Also we will be able to return EROFS in case writeable mount is requested but writing isn't supported. Signed-off-by: Jan Kara <jack@suse.cz>
2013-03-11fs: Limit sys_mount to only request filesystem modules. (Part 3)Eric W. Biederman
Somehow I failed to add the MODULE_ALIAS_FS for cifs, hostfs, hpfs, squashfs, and udf despite what I thought were my careful checks :( Add them now. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-05udf: Remove unused s_extLength from udf_bitmapJan Kara
s_extLength was assigned to but the value was never really used. So just remove the field. Signed-off-by: Jan Kara <jack@suse.cz>
2013-02-05udf: Make s_block_bitmap standard arrayJan Kara
struct udf_bitmap has array of buffer pointers attached to it. The code unnecessarily used s_block_bitmap as a pointer to the array instead of the standard trick of using 0 length array in the declaration. Change that to make code more readable and actually shrink the structure by one pointer. Signed-off-by: Jan Kara <jack@suse.cz>
2013-01-22udf: add extent cache support in case of file readingNamjae Jeon
This patch implements extent caching in case of file reading. While reading a file, currently, UDF reads metadata serially which takes a lot of time depending on the number of extents present in the file. Caching last accessd extent improves metadata read time. Instead of reading file metadata from start, now we read from the cached extent. This patch considerably improves the time spent by CPU in kernel mode. For example, while reading a 10.9 GB file using dd: Time before applying patch: 11677022208 bytes (10.9GB) copied, 1529.748921 seconds, 7.3MB/s real 25m 29.85s user 0m 12.41s sys 15m 34.75s Time after applying patch: 11677022208 bytes (10.9GB) copied, 1469.338231 seconds, 7.6MB/s real 24m 29.44s user 0m 15.73s sys 3m 27.61s [JK: Fix bh refcounting issues, simplify initialization] Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: Bonggil Bak <bgbak@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-01-21udf: Write LVID to disk after opening / closingJan Kara
So far we just marked the buffer as dirty and left writing on flusher thread but especially on opening that opens possible race window where we could write other modified fs structures to disk before we mark filesystem as open. So sync LVID buffer to disk after opening and closing fs. Reported-by: Steve Nickel <snickel58@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-01-14UDF: Fix a null pointer dereference in udf_sb_free_partitionsNamjae Jeon
This patch fixes a regression caused by commit bff943af6fe "udf: Fix memory leak when mounting" due to which it was triggering a kernel null point dereference in case of interrupted mount OR when allocating memory to sbi->s_partmaps failed in function udf_sb_alloc_partition_maps. Reported-and-tested-by: James Hogan <james@albanarts.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs update from Al Viro: - big one - consolidation of descriptor-related logics; almost all of that is moved to fs/file.c (BTW, I'm seriously tempted to rename the result to fd.c. As it is, we have a situation when file_table.c is about handling of struct file and file.c is about handling of descriptor tables; the reasons are historical - file_table.c used to be about a static array of struct file we used to have way back). A lot of stray ends got cleaned up and converted to saner primitives, disgusting mess in android/binder.c is still disgusting, but at least doesn't poke so much in descriptor table guts anymore. A bunch of relatively minor races got fixed in process, plus an ext4 struct file leak. - related thing - fget_light() partially unuglified; see fdget() in there (and yes, it generates the code as good as we used to have). - also related - bits of Cyrill's procfs stuff that got entangled into that work; _not_ all of it, just the initial move to fs/proc/fd.c and switch of fdinfo to seq_file. - Alex's fs/coredump.c spiltoff - the same story, had been easier to take that commit than mess with conflicts. The rest is a separate pile, this was just a mechanical code movement. - a few misc patches all over the place. Not all for this cycle, there'll be more (and quite a few currently sit in akpm's tree)." Fix up trivial conflicts in the android binder driver, and some fairly simple conflicts due to two different changes to the sock_alloc_file() interface ("take descriptor handling from sock_alloc_file() to callers" vs "net: Providing protocol type via system.sockprotoname xattr of /proc/PID/fd entries" adding a dentry name to the socket) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits) MAX_LFS_FILESIZE should be a loff_t compat: fs: Generic compat_sys_sendfile implementation fs: push rcu_barrier() from deactivate_locked_super() to filesystems btrfs: reada_extent doesn't need kref for refcount coredump: move core dump functionality into its own file coredump: prevent double-free on an error path in core dumper usb/gadget: fix misannotations fcntl: fix misannotations ceph: don't abuse d_delete() on failure exits hypfs: ->d_parent is never NULL or negative vfs: delete surplus inode NULL check switch simple cases of fget_light to fdget new helpers: fdget()/fdput() switch o2hb_region_dev_write() to fget_light() proc_map_files_readdir(): don't bother with grabbing files make get_file() return its argument vhost_set_vring(): turn pollstart/pollstop into bool switch prctl_set_mm_exe_file() to fget_light() switch xfs_find_handle() to fget_light() switch xfs_swapext() to fget_light() ...
2012-10-02fs: push rcu_barrier() from deactivate_locked_super() to filesystemsKirill A. Shutemov
There's no reason to call rcu_barrier() on every deactivate_locked_super(). We only need to make sure that all delayed rcu free inodes are flushed before we destroy related cache. Removing rcu_barrier() from deactivate_locked_super() affects some fast paths. E.g. on my machine exit_group() of a last process in IPC namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
2012-09-21userns: Convert the udf filesystem to use kuid/kgid where appropriateEric W. Biederman
Cc: Jan Kara <jack@suse.cz> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-08-15udf: fix retun value on error path in udf_load_logicalvolNikola Pajkovsky
In case we detect a problem and bail out, we fail to set "ret" to a nonzero value, and udf_load_logicalvol will mistakenly report success. Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-08-15UDF: During mount free lvid_bh before rescanning with different blocksizeAshish Sangwan
If s_lvid_bh is not freed and set to NULL before re-scanning partition with default block size, we might end up using wrong lvid in case s_lvid_bh is not updated in udf_load_logicalvolint during rescan. Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-07-10udf: Improve table length check to avoid possible overflowJan Kara
When a partition table length is corrupted to be close to 1 << 32, the check for its length may overflow on 32-bit systems and we will think the length is valid. Later on the kernel can crash trying to read beyond end of buffer. Fix the check to avoid possible overflow. CC: stable@vger.kernel.org Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jan Kara <jack@suse.cz>
2012-07-09udf: Fix memory leak when mountingJan Kara
When we are mounting filesystem, we can load one partition table before finding out that we cannot complete processing of logical volume descriptor and trying the reserve descriptor. Free the table properly before trying the reserve descriptor. Signed-off-by: Jan Kara <jack@suse.cz>
2012-07-09udf: stop using s_dirtArtem Bityutskiy
The UDF file-system does not need the 's_dirt' superblock flag because it does not define the 'write_super()' method. This flag was set to 1 in few places and set to 0 in '->sync_fs()' and was basically useless. Stop using it because it is on its way out. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-06-28udf: Fortify loading of sparing tableJan Kara
Add sanity checks when loading sparing table from disk to avoid accessing unallocated memory or writing to it. Signed-off-by: Jan Kara <jack@suse.cz>
2012-06-28udf: Avoid run away loop when partition table length is corruptedJan Kara
Check provided length of partition table so that (possibly maliciously) corrupted partition table cannot cause accessing data beyond current buffer. Signed-off-by: Jan Kara <jack@suse.cz>
2012-06-28udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()Jan Kara
Signed-off-by: Jan Kara <jack@suse.cz>
2012-03-28Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3, UDF, and quota fixes from Jan Kara: "A couple of ext3 & UDF fixes and also one improvement in quota locking." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext3: fix start and len arguments handling in ext3_trim_fs() udf: Fix deadlock in udf_release_file() udf: Fix file entry logicalBlocksRecorded udf: Fix handling of i_blocks quota: Make quota code not call tty layer with dqptr_sem held udf: Init/maintain file entry checkpoint field ext3: Update ctime in ext3_splice_branch() only when needed ext3: Don't call dquot_free_block() if we don't update anything udf: Remove unnecessary OOM messages
2012-03-20switch open-coded instances of d_make_root() to new helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20vfs: check i_nlink limits in vfs_{mkdir,rename_dir,link}Al Viro
New field of struct super_block - ->s_max_links. Maximal allowed value of ->i_nlink or 0; in the latter case all checks still need to be done in ->link/->mkdir/->rename instances. Note that this limit applies both to directoris and to non-directories. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-02-29udf: Remove unnecessary OOM messagesJoe Perches
Per call site OOM messages are unnecessary. k.alloc and v.alloc failures use dump_stack(). Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>