summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-05-07viafb: replace inb/outbFlorian Tobias Schandinat
viafb: replace inb/outb This patch replaces occurences of inb/outb with via_write_reg and via_write_reg_mask where this is possible to improve code readability. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-05-07viafb: move some modesetting functions to a seperate fileFlorian Tobias Schandinat
viafb: move some modesetting functions to a seperate file This patch moves the modesetting functions which are already cleaned up to a seperate file. Just the beginning to bring some structure in this mess. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-05-07viafb: unify modesetting functionsFlorian Tobias Schandinat
viafb: unify modesetting functions This patch unifies some cleaned up modesetting functions to prepare for moving them to an extra file. This includes make them use via_io and changing there names to reflect that they do not depend on anything framebuffer specific. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-05-07viafb: Reserve framebuffer memory for the upcoming camera driverJonathan Corbet
The camera engine captures to framebuffer memory, so we need to set some aside for that purpose. There is no proper memory allocator for fbmem; instead, accel.c just trims some space off the top. Alas, without creating that proper memory allocator, the only way to make this work is to hack it into the same bit of code in accel.c. The allocation must happen *after* the others (some code, including user-space XV stuff, makes assumptions on where the cursor space is), and before the rest of the framebuffer is set up. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: Add a simple VX855 DMA engine driverJonathan Corbet
This code provides a minimal amount of access to the DMA engine as needed by the camera driver. VX855 only; it's guaranteed not to work on other chipsets, so it won't try. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: Add a simple interrupt management infrastructureJonathan Corbet
The viafb device shares a single interrupt control register among several distinct subunits. This adds a simple layer for management of that register. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07via: Rationalize vt1636 detectionJonathan Corbet
The code was ugly and didn't check whether i2c operations were succeeding; make it a little better. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: Introduce viafb_find_i2c_adapter()Jonathan Corbet
The camera driver will need this to look up a specific adapter. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07via: Do not attempt I/O on inactive I2C adaptersJonathan Corbet
If an adapter has been configured for GPIO (or off), we should not try to use it as an I2C port. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: Turn GPIO and i2c into proper platform devicesJonathan Corbet
Another step toward making this thing a real multifunction device driver. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: Convert GPIO and i2c to the new indexed port opsJonathan Corbet
Also add low-level locking to the i2c driver. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: package often used basic io functionsFlorian Tobias Schandinat
This patch puts redesigned versions of the basic io functions that are used overall the driver in an extra header. It is prefixed with via_ as no framebuffer dependend stuff is in there. They were inlined as they are really simple which reduced the module size about 2.5%. The parameter order of read and write was fixed as it really doesn't make sense to change the order as they are parts of the same address and not source and destination. Wrapper which use the new functions were added to hw.h to replicate the old interface and avoid changing all old code. [jc: added one comment] Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-05-07viafb: add a driver for GPIO linesJonathan Corbet
This is a simple gpiolib driver giving access to the GPIO lines in the VIA framebuffer system. A simple mechanism exists for switching lines between GPIO and I2C, but it's only compile-time for now. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: Separate global and fb-specific dataJonathan Corbet
This patch moves data of interest into a new viafb_dev structure which describes the device as a whole; the idea here is to create a separation between what all devices may need and what the framebuffer device in particular needs. I've also made some small steps toward thinning out the global.h mess. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-05-07viafb: Move core stuff into via-core.cJonathan Corbet
The first step toward turning viafb into a multifunction driver. This patch creates a new via-core.c file which serves as the main PCI driver; everything else comes below that. Some work has been done to rationalize the i2c drivers in this new scheme. Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-27viafb: Only establish i2c busses on ports that always had themJonathan Corbet
...otherwise it seems we run into conflicts with shadowy other users which don't expect to see i2c taking control of ports it never used to do anything with. Reported-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-27suppress verbose debug messages: change printk() to DEBUG_MSG()Paul Fox
[jc: no signoff, added my own] Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-27viafb: rework the I2C support in the VIA framebuffer driverHarald Welte
This patch changes the way how the various I2C busses are used internally inside the viafb driver: Previosuly, only a single i2c_adapter was created, even though two different hardware I2C busses are accessed: A structure member in a global variable was modified to indicate the bus to be used. Now, all existing hardware busses are registered with the i2c core, and the viafb_i2c_{read,write}byte[s]() function take the adapter number as function call parameter, rather than referring to the global structure member. [jc: even more painful merge with mainline changes ->2.6.34] [jc: painful merge with OLPC changes] Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20viafb: Add 1200x900 DCON/LCD panel modes for OLPC XO-1.5Chris Ball
[jc: extensive merge conflict fixes] Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Chris Ball <cjb@laptop.org>
2010-04-20viafb: complete support for VX800/VX855 accelerated framebufferJonathan Corbet
This patch is a painful merge of change a90bab567ece3e915d0ccd55ab00c9bb333fa8c0 (viafb: Add support for 2D accelerated framebuffer on VX800/VX855) in the OLPC tree, originally by Harald Welte. Harald's changelog read: The VX800/VX820 and the VX855/VX875 chipsets have a different 2D acceleration engine called "M1". The M1 engine has some subtle (and some not-so-subtle) differences to the previous engines, so support for accelerated framebuffer on those chipsets was disabled so far. This merge tries to preserve Harald's changes in the framework of the much-changed 2.6.34 viafb code. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20viafb: Determine type of 2D engine and store it in chip_infoHarald Welte
This will help us for the upcoming support for 2D acceleration using the M1 engine. [jc: fixed merge conflicts] Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
2010-04-20viafb: Unify duplicated set_bpp() codeJonathan Corbet
As suggested by Florian: make both mode-setting paths use the same code. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20viafb: Retain GEMODE reserved bitsJonathan Corbet
Commit c3e25673843153ea75fda79a47cf12f10a25ca37 (viafb: 2D engine rewrite) changed the setting of the GEMODE register so that the reserved bits are no longer preserved. Fix that; at the same time, move this code to its own function and restore the use of symbolic constants. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20viafb: Unmap the frame buffer on initialization errorJonathan Corbet
This was part of Harald's "make viafb a first-class citizen using pci_driver" patch, but somehow got dropped when that patch went into mainline. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2010-04-20viafb: use proper pci config APIHarald Welte
This patch alters viafb to use the proper Linux in-kernel API to access PCI configuration space, rather than poking at I/O ports by itself. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
2010-04-20viafb: Fix various resource leaks during module_init()Harald Welte
The current code executed from module_init() in viafb does not have proper error checking and [partial] resoure release paths in case an error happens half way through driver initialization. This patch adresses the most obvious of those issues, such as a leftover i2c bus if module_init (and thus module load) fails. [jc: fixed merge conflicts] [jc: also restored -ENOMEM return on ioremap() fail] Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: ScottFang@viatech.com.cn Cc: JosephChan@via.com.tw Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
2010-03-29Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (asc7621) Add X58 entry in Kconfig hwmon: (w83793) Saving negative errors in unsigned hwmon: (coretemp) Add missing newline to dev_warn() message hwmon: (coretemp) Fix cpu model output
2010-03-29Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_via: fix VT6410/6415/6330 detection issue
2010-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) r8169: offical fix for CVE-2009-4537 (overlength frame DMAs) ipv6: Don't drop cache route entry unless timer actually expired. tulip: Add missing parens. r8169: fix broken register writes pcnet_cs: add new id bonding: fix broken multicast with round-robin mode drivers/net: Fix continuation lines e1000: do not modify tx_queue_len on link speed change net: ipmr/ip6mr: prevent out-of-bounds vif_table access ixgbe: Do not run all Diagnostic offline tests when VFs are active igb: use correct bits to identify if managability is enabled benet: Fix compile warnnings in drivers/net/benet/be_ethtool.c net: Add MSG_WAITFORONE flag to recvmmsg e1000e: do not modify tx_queue_len on link speed change igbvf: do not modify tx_queue_len on link speed change ipv4: Restart rt_intern_hash after emergency rebuild (v2) ipv4: Cleanup struct net dereference in rt_intern_hash net: fix netlink address dumping in IPv4/IPv6 tulip: Fix null dereference in uli526x_rx_packet() gianfar: fix undo of reserve() ...
2010-03-29r8169: offical fix for CVE-2009-4537 (overlength frame DMAs)Neil Horman
Official patch to fix the r8169 frame length check error. Based on this initial thread: http://marc.info/?l=linux-netdev&m=126202972828626&w=1 This is the official patch to fix the frame length problems in the r8169 driver. As noted in the previous thread, while this patch incurs a performance hit on the driver, its possible to improve performance dynamically by updating the mtu and rx_copybreak values at runtime to return performance to what it was for those NICS which are unaffected by the ideosyncracy (if there are any). Summary: A while back Eric submitted a patch for r8169 in which the proper allocated frame size was written to RXMaxSize to prevent the NIC from dmaing too much data. This was done in commit fdd7b4c3302c93f6833e338903ea77245eb510b4. A long time prior to that however, Francois posted 126fa4b9ca5d9d7cb7d46f779ad3bd3631ca387c, which expiclitly disabled the MaxSize setting due to the fact that the hardware behaved in odd ways when overlong frames were received on NIC's supported by this driver. This was mentioned in a security conference recently: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html It seems that if we can't enable frame size filtering, then, as Eric correctly noticed, we can find ourselves DMA-ing too much data to a buffer, causing corruption. As a result is seems that we are forced to allocate a frame which is ready to handle a maximally sized receive. This obviously has performance issues with it, so to mitigate that issue, this patch does two things: 1) Raises the copybreak value to the frame allocation size, which should force appropriately sized packets to get allocated on rx, rather than a full new 16k buffer. 2) This patch only disables frame filtering initially (i.e., during the NIC open), changing the MTU results in ring buffer allocation of a size in relation to the new mtu (along with a warning indicating that this is dangerous). Because of item (2), individuals who can't cope with the performance hit (or can otherwise filter frames to prevent the bug), or who have hardware they are sure is unaffected by this issue, can manually lower the copybreak and reset the mtu such that performance is restored easily. Signed-off-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-29hwmon: (asc7621) Add X58 entry in KconfigJaswinder Singh Rajput
Intel X58 have asc7621a chip. So added X58 entry in Kconfig for asc7621. Also arranged existing models in ascending order. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-29hwmon: (w83793) Saving negative errors in unsignedDan Carpenter
"ret" is used to store the return value for watchdog_trigger() and it should be signed for the error handling to work. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-29hwmon: (coretemp) Add missing newline to dev_warn() messageDean Nelson
Add missing newline to dev_warn() message string. This is more of an issue with older kernels that don't automatically add a newline if it was missing from the end of the previous line. Signed-off-by: Dean Nelson <dnelson@redhat.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-29hwmon: (coretemp) Fix cpu model outputPrarit Bhargava
Avoid hex and decimal confusion when printing out the cpu model. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: Revert "ide: skip probe if there are no devices on the port (v2)" Revert "via82cxxx: workaround h/w bugs"
2010-03-29Staging: et131x: Properly disable FC in txmac.Nick Bowler
FC disable is bit 3 of the txmac ctl register, but commit 6720949d5562 ("Staging: et131x: Kil the txmac type") accidentally changed the code to set bit 2 instead. Signed-off-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-28Revert "ide: skip probe if there are no devices on the port (v2)"David S. Miller
This reverts commit a20b2a44eca52818ef52a94959480b7e6ea2f528. As requested by David Fries. This makes CDROMs which are slave drives on a ribbon without a master disappear and causes other similar kinds of badness. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-28tulip: Add missing parens.David S. Miller
As reported by Stephen Rothwell. drivers/net/tulip/uli526x.c: In function 'uli526x_rx_packet': drivers/net/tulip/uli526x.c:861: warning: assignment makes pointer from integer without a cast Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-28pata_via: fix VT6410/6415/6330 detection issueJosephChan@via.com.tw
When using VT6410/6415/6330 chips on some VIA's platforms, the HDD connection to VT6410/6415/6330 cannot be detected. It is because the driver detects wrong via_isa_bridge ID, and then causes this issue to happen. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-27r8169: fix broken register writesFrancois Romieu
This is quite similar to b39fe41f481d20c201012e4483e76c203802dda7 though said registers are not even documented as 64-bit registers - as opposed to the initial TxDescStartAddress ones - but as single bytes which must be combined into 32 bits at the MMIO read/write level before being merged into a 64 bit logical entity. Credits go to Ben Hutchings <ben@decadent.org.uk> for the MAR registers (aka "multicast is broken for ages on ARM) and to Timo Teräs <timo.teras@iki.fi> for the MAC registers. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27pcnet_cs: add new idKen Kawasaki
pcnet_cs: *add new id (Allied Telesis LM33-PCM-T Lan&Modem multifunction card) *use PROD_ID for LA-PCM.(because LA-PCM and LM33-PCM-T use the same MANF_ID). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27bonding: fix broken multicast with round-robin modeAndy Gospodarek
Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27drivers/net: Fix continuation linesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27e1000: do not modify tx_queue_len on link speed changeEmil Tantilov
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. This patch removes all instances of tx_queue_len in the driver. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27ixgbe: Do not run all Diagnostic offline tests when VFs are activeGreg Rose
When running the offline diagnostic tests check to see if any VFs are online. If so then only run the link test. This is necessary because the VFs running in guest VMs aren't aware of when the PF is taken offline for a diagnostic test. Also put a message to the system log telling the system administrator to take the VFs offline manually if (s)he wants to run a full diagnostic. Return 1 on each of the tests not run to alert the user of the condition. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27igb: use correct bits to identify if managability is enabledAlexander Duyck
igb was previously checking the wrong bits in the MANC register to determine if managability was enabled. As a result it was incorrectly powering down and resetting the phy when it didn't need to. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27benet: Fix compile warnnings in drivers/net/benet/be_ethtool.cwzt wzt
Fix the following warnings: be_ethtool.c:493: warning: integer constant is too large for 'long' type be_ethtool.c:493: warning: integer constant is too large for 'long' type Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com> Acked-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27Revert "via82cxxx: workaround h/w bugs"David S. Miller
This reverts commit f931a5d5785d7b7c44871bd7ad2762e29dfddf29. It causes regressions for some users. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26e1000e: do not modify tx_queue_len on link speed changeEmil Tantilov
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. This patch removes all instances of tx_queue_len in the driver. Originally reported and patched by Franco Fichtner CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26igbvf: do not modify tx_queue_len on link speed changeEmil Tantilov
Previously the driver tweaked txqueuelen to avoid false Tx hang reports seen at half duplex. This had the effect of overriding user set values on link change/reset. Testing shows that adjusting only the timeout factor is sufficient to prevent Tx hang reports at half duplex. Based on e1000e patch by Franco Fichtner <franco@lastsummer.de> CC: Franco Fichtner <franco@lastsummer.de> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-22 05:28:47 +0000