summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-10-21Bluetooth: bpa10x: fix BT_HCIUART dependencyArnd Bergmann
The change to bpa10x to use the h4_recv_buf helper added a dependency on BT_HCIUART. This was incorrectly added to Kconfig by adding a 'select' statement, which now in turn causes build failures when CONFIG_TTY is not set: warning: (BT_HCIBPA10X) selects BT_HCIUART which has unmet direct dependencies (NET && BT && TTY) vers/built-in.o: In function `hci_uart_tty_receive': fpga-mgr.c:(.text+0x282824): undefined reference to `tty_unthrottle' drivers/built-in.o: In function `hci_uart_tty_ioctl': fpga-mgr.c:(.text+0x282aa0): undefined reference to `n_tty_ioctl_helper' drivers/built-in.o: In function `hci_uart_flush': This replaces the 'select BT_HCIUART' dependency with 'depends on', which does not have this kind of problem. Alternatively, one could add 'depends on TTY', but avoiding 'select' on user-visible options is generally the preferred choice as that does not introduce the potential for dependency loops or incomplete dependency chains. Fixes: 91489919247a ("Bluetooth: bpa10x: Fix missing BT_HCIUART dependency") Fixes: 943cc592195e ("Bluetooth: bpa10x: Use h4_recv_buf helper for frame reassembly") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21Bluetooth: btusb: Print information of Intel SfP lock statesMarcel Holtmann
The lock states from Intel SfP controllers can only be read once before loading the firmware. So for debugging purposes, print them out. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: btintel: Add support for enabling tracing functionalityMarcel Holtmann
For Intel controllers with firmware that allows tracing of baseband functionality this allows enabling it via set_diag driver callback. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: btusb: Add support for Broadcom LM_DIAG interfaceMarcel Holtmann
The Broadcom Bluetooth USB devices have a third interface that is dedicated for LM_DIAG messages. The If#= 2 describes this interface and it consists of one bulk in and one bulk endpoint. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 38 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=19ff ProdID=0239 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) For all Broadcom based devices with this interface, the driver now claims it and schedules URBs for it. This allows to capture the LM_DIAG messages and allows forwarding them via hci_recv_diag into the diagnostic channel of the Bluetooth subsystem. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21Bluetooth: bpa10x: Fix missing BT_HCIUART dependencyMarcel Holtmann
Selecting just BT_HCIUART_H4 is not enough and it also needs to select BT_HCIUART to avoid this warning: warning: (BT_HCIBPA10X) selects BT_HCIUART_H4 which has unmet direct dependencies (NET && BT && BT_HCIUART) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Account for extra headroom in ath9k driver, from Felix Fietkau. 2) Fix OOPS in pppoe driver due to incorrect socket state transition, from Guillaume Nault. 3) Kill memory leak in amd-xgbe debugfx, from Geliang Tang. 4) Power management fixes for iwlwifi, from Johannes Berg. 5) Fix races in reqsk_queue_unlink(), from Eric Dumazet. 6) Fix dst_entry usage in ARP replies, from Jiri Benc. 7) Cure OOPSes with SO_GET_FILTER, from Daniel Borkmann. 8) Missing allocation failure check in amd-xgbe, from Tom Lendacky. 9) Various resource allocation/freeing cures in DSA< from Neil Armstrong. 10) A series of bug fixes in the openvswitch conntrack support, from Joe Stringer. 11) Fix two cases (BPF and act_mirred) where we have to clean the sender cpu stored in the SKB before transmitting. From WANG Cong and Alexei Starovoitov. 12) Disable VLAN filtering in promiscuous mode in mlx5 driver, from Achiad Shochat. 13) Older bnx2x chips cannot do 4-tuple UDP hashing, so prevent this configuration via ethtool. From Yuval Mintz. 14) Don't call rt6_uncached_list_flush_dev() from rt6_ifdown() when 'dev' is NULL, from Eric Biederman. 15) Prevent stalled link synchronization in tipc, from Jon Paul Maloy. 16) kcalloc() gstrings ethtool buffer before having driver fill it in, in order to prevent kernel memory leaking. From Joe Perches. 17) Fix mixxing rt6_info initialization for blackhole routes, from Martin KaFai Lau. 18) Kill VLAN regression in via-rhine, from Andrej Ota. 19) Missing pfmemalloc check in sk_add_backlog(), from Eric Dumazet. 20) Fix spurious MSG_TRUNC signalling in netlink dumps, from Ronen Arad. 21) Scrube SKBs when pushing them between namespaces in openvswitch, from Joe Stringer. 22) bcmgenet enables link interrupts too early, fix from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits) net: bcmgenet: Fix early link interrupt enabling tunnels: Don't require remote endpoint or ID during creation. openvswitch: Scrub skb between namespaces xen-netback: correctly check failed allocation net: asix: add support for the Billionton GUSB2AM-1G-B USB adapter netlink: Trim skb to alloc size to avoid MSG_TRUNC net: add pfmemalloc check in sk_add_backlog() via-rhine: fix VLAN receive handling regression. ipv6: Initialize rt6_info properly in ip6_blackhole_route() ipv6: Move common init code for rt6_info to a new function rt6_info_init() Bluetooth: Fix initializing conn_params in scan phase Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanup Bluetooth: Fix remove_device behavior for explicit connects Bluetooth: Fix LE reconnection logic Bluetooth: Fix reference counting for LE-scan based connections Bluetooth: Fix double scan updates mlxsw: core: Fix race condition in __mlxsw_emad_transmit tipc: move fragment importance field to new header position ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings tipc: eliminate risk of stalled link synchronization ...
2015-10-18net: bcmgenet: Fix early link interrupt enablingFlorian Fainelli
Link interrupts are enabled in init_umac(), which is too early for us to process them since we do not yet have a valid PHY device pointer. On BCM7425 chips for instance, we will crash calling phy_mac_interrupt() because phydev is NULL. Fix this by moving the link interrupts enabling in bcmgenet_netif_start(), under a specific function: bcmgenet_link_intr_enable() and while at it, update the comments surrounding the code. Fixes: 6cc8e6d4dcb36 ("net: bcmgenet: Delay PHY initialization to bcmgenet_open()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge tag 'wireless-drivers-for-davem-2015-10-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * mvm: flush fw_dump_wk when mvm fails to start * mvm: init card correctly on ctkill exit check * pci: add a few more PCI subvendor IDs for the 7265 series * fix firmware filename for 3160 * mvm: clear csa countdown when AP is stopped * mvm: fix D3 firmware PN programming * dvm: fix D3 firmware PN programming * mvm: fix D3 CCMP TX PN assignment rtlwifi: * rtl8821ae: Fix system lockups on boot ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18tunnels: Don't require remote endpoint or ID during creation.Jesse Gross
Before lightweight tunnels existed, it really didn't make sense to create a tunnel that was not fully specified, such as without a destination IP address - the resulting packets would go nowhere. However, with lightweight tunnels, the opposite is true - it doesn't make sense to require this information when it will be provided later on by the route. This loosens the requirements for this information. An alternative would be to allow the relaxed version only when COLLECT_METADATA is enabled. However, since there are several variations on this theme (such as NBMA tunnels in GRE), just dropping the restrictions seems the most consistent across tunnels and with the existing configuration. CC: John Linville <linville@tuxdriver.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hix5hd2_gmac: avoid integer overload warningArnd Bergmann
BITS_RX_EN is an 'unsigned long' constant, so the ones complement of that has bits set that do not fit into a 32-bit variable on 64-bit architectures, which causes a harmless gcc warning: drivers/net/ethernet/hisilicon/hix5hd2_gmac.c: In function 'hix5hd2_port_disable': drivers/net/ethernet/hisilicon/hix5hd2_gmac.c:374:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~(BITS_RX_EN | BITS_TX_EN), priv->base + PORT_EN); This adds a cast to (u32) to tell gcc that the code is indeed fine. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon: add OF dependencyArnd Bergmann
The HNS MDIO driver fails to build on older ARM machines that are not yet converted to CONFIG_OF: drivers/net/ethernet/hisilicon/hns_mdio.c: In function 'hns_mdio_bus_name': drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: error: 'OF_BAD_ADDR' undeclared (first use in this function) u64 taddr = OF_BAD_ADDR; ^ drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/hisilicon/hns_mdio.c:409:11: error: implicit declaration of function 'of_translate_address' [-Werror=implicit-function-declaration] taddr = of_translate_address(np, addr); ^ This clarifies the dependency to ensure we don't attempt to build these drivers without CONFIG_OF, but also adds a COMPILE_TEST alternative to give us better build coverage testing. Build-tested on x86 as well to ensure this actually works. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon: include linux/vmalloc.h in dsafArnd Bergmann
Some configurations fail to build the hns dsaf code because of a missing header file: ethernet/hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_init': ethernet/hisilicon/hns/hns_dsaf_main.c:1096:2: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] priv->soft_mac_tbl = vzalloc(sizeof(*priv->soft_mac_tbl) This adds the correct #include. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hns: fixes a bug about timeout by pause framelisheng
this patch fixes the bug triggered timeout sequence. when the connective ports cannot accept the packets with higher speed, they will send out the pause frame to the Soc's mac. At that time, the driver resets the relevant of the Soc, then it causes the packets cannot be sent out immediately. this patch fixes the issue. Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: lisheng <lisheng011@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hns: fixes the issue by using ethtool -sChenny Xu
before this patch, hns driver only permits user to set the net device by using ethtool -s when the device is link up. it is obviously not so good. it needs to be set no matter it is link up or down. so this patch fixes this issue. Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: lisheng <lisheng011@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Chenny Xu <chenny.xu@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon fix a bug on Hisilicon Network Subsystemhuangdaode
This patch fixes the wrong judgement of mac_id when get port num. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon rm hnae sysfs interfacehuangdaode
This patch removes the hns driver hnae sysfs interface according to Arnd's review comments. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18xen-netback: correctly check failed allocationInsu Yun
Since vzalloc can be failed in memory pressure, writes -ENOMEM to xenstore to indicate error. Signed-off-by: Insu Yun <wuninsu@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: asix: add support for the Billionton GUSB2AM-1G-B USB adapterChia-Sheng Chang
Just another AX88178-based 10/100/1000 USB-to-Ethernet dongle. This one shows up in lsusb as: "ID 08dd:0114 Billionton Systems, Inc". Signed-off-by: Chia-Sheng Chang <changchias@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Christoph Jaeger <cj@linux.com> Cc: "Woojung.Huh@microchip.com" <Woojung.Huh@microchip.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: netdev@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: phy: bcm-phy-lib: Fix module license issueArun Parameswaran
The 'bcm-phy-lib.c', added as a part of the commit "net: phy: Add Broadcom phy library for common interfaces" was missing the module license. This was causing an issue when the library is built as a module; "module license 'unspecified' taints kernel". This patch fixes the issue by adding the module license, author and description to the bcm-phy-lib.c file. Fixes: a1cba5613edf5 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Here are some bugfixes for the I2C subsystem. Kieran found a flaw in the recently renewed wake irq handling. Mika handled a user bug report where the ACPI info turned out to be unusable. I updated MAINTAINERS so that such bug reports will sooner get to the right people. Geert pointed me to a problem of some i2c drivers regarding PM which I fixed" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 MAINTAINERS: add maintainers for Synopsis Designware I2C drivers i2c: designware-platdrv: enable RuntimePM before registering to the core i2c: s3c2410: enable RuntimePM before registering to the core i2c: rcar: enable RuntimePM before registering to the core i2c: return probe deferred status on dev_pm_domain_attach
2015-10-18i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348Mika Westerberg
ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-10-17Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq/timer fixes from Thomas Gleixner: "irq: a fix for the new hierarchical MSI interrupt handling which unbreaks PCI=n configurations. timers: a fix for the new hrtimer clock offset update mechanism to ensure that the boot time offset is respected" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Do not use pci_msi_[un]mask_irq as default methods * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Increment clock_was_set_seq in timekeeping_init()
2015-10-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI
2015-10-16Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "Just one revert for Armada XP devices: the conversion to of_clk_get_parent_name() wasn't a direct translation, so we revert back to of_clk_get() + __clk_get_name(). We could make of_clk_get_parent_name() more robust, but that may have unintended side-effects, so we'll do that in the next version" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"
2015-10-16Merge tag 'dm-4.3-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Two DM target error path cleanup fixes (one for stable in DM thinp and one for a v4.3-rc5 thinko in DM snapshot)" * tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: fix missing pool reference count decrement in pool_ctr error path dm snapshot persistent: fix missing cleanup in persistent_ctr error path
2015-10-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "Just two small items from Ilya: The first patch fixes the RBD readahead to grab full objects. The second fixes the write ops to prevent undue promotion when a cache tier is configured on the server side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use writefull op for object size writes rbd: set max_sectors explicitly
2015-10-16Merge tag 'pm+acpi-4.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These fix two recent regressions (ACPICA, the generic power domains framework) and one crash that may happen on specific hardware supported since 4.1 (intel_pstate). Specifics: - Fix a regression introduced by a recent ACPICA cleanup that uncovered a latent bug (Lv Zheng). - Fix a recent regression in the generic power domains framework that may cause it to violate PM QoS latency constraints in some cases (Ulf Hansson). - Fix an intel_pstate driver crash on the Knights Landing chips that do not update the MPERF counter as often as expected by the driver which may result in a divide by 0 (Srinivas Pandruvada)" * tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) ACPICA: Tables: Fix FADT dependency regression PM / Domains: Fix validation of latency constraints in genpd governor
2015-10-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too crazy or exciting: - two MAINTAINERS entries that I didn't see the point in delaying. - one drm mst fix to stop sending uninitialised data to monitors - two amdgpu fixes - one radeon mst tiling fix - one vmwgfx regression fix - one virtio warning fix. I have found one locking problem that needs a bit of reorg to fix, but I'm not sure it's worth putting in -fixes as I don't think we've seen it hit in the real world ever, I just found it using the virtio-gpu driver when working on it. I'll possibly send it next week once I've time to discuss with Daniel" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/virtio: use %llu format string form atomic64_t MAINTAINERS: Add myself as maintainer for the gma500 driver MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver drm/amdgpu: Keep the pflip interrupts always enabled v7 drm/amdgpu: adjust default dispclk (v2) drm/dp/mst: make mst i2c transfer code more robust. drm/radeon: attach tile property to mst connector drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware
2015-10-16Merge tag 'powerpc-4.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Re-enable CONFIG_SCSI_DH in our defconfigs - Remove unused os_area_db_id_video_mode - cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew - cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew - cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew - cxl: Workaround malformed pcie packets on some cards from Philippe - cxl: Fix number of allocated pages in SPA from Christophe Lombard - Fix checkstop in native_hpte_clear() with lockdep from Cyril - Panic on unhandled Machine Check on powernv from Daniel - selftests/powerpc: Fix build failure of load_unaligned_zeropad test * tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure of load_unaligned_zeropad test powerpc/powernv: Panic on unhandled Machine Check powerpc: Fix checkstop in native_hpte_clear() with lockdep cxl: Fix number of allocated pages in SPA cxl: Workaround malformed pcie packets on some cards cxl: fix leak of ctx->mapping when releasing kernel API contexts cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API cxl: fix leak of IRQ names in cxl_free_afu_irqs() powerpc/ps3: Remove unused os_area_db_id_video_mode powerpc/configs: Re-enable CONFIG_SCSI_DH
2015-10-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: sh: add copy_user_page() alias for __copy_user() lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE mm, dax: fix DAX deadlocks memcg: convert threshold to bytes builddeb: remove debian/files before build mm, fs: obey gfp_mapping for add_to_page_cache()
2015-10-16mm, fs: obey gfp_mapping for add_to_page_cache()Michal Hocko
Commit 6afdb859b710 ("mm: do not ignore mapping_gfp_mask in page cache allocation paths") has caught some users of hardcoded GFP_KERNEL used in the page cache allocation paths. This, however, wasn't complete and there were others which went unnoticed. Dave Chinner has reported the following deadlock for xfs on loop device: : With the recent merge of the loop device changes, I'm now seeing : XFS deadlock on my single CPU, 1GB RAM VM running xfs/073. : : The deadlocked is as follows: : : kloopd1: loop_queue_read_work : xfs_file_iter_read : lock XFS inode XFS_IOLOCK_SHARED (on image file) : page cache read (GFP_KERNEL) : radix tree alloc : memory reclaim : reclaim XFS inodes : log force to unpin inodes : <wait for log IO completion> : : xfs-cil/loop1: <does log force IO work> : xlog_cil_push : xlog_write : <loop issuing log writes> : xlog_state_get_iclog_space() : <blocks due to all log buffers under write io> : <waits for IO completion> : : kloopd1: loop_queue_write_work : xfs_file_write_iter : lock XFS inode XFS_IOLOCK_EXCL (on image file) : <wait for inode to be unlocked> : : i.e. the kloopd, with it's split read and write work queues, has : introduced a dependency through memory reclaim. i.e. that writes : need to be able to progress for reads make progress. : : The problem, fundamentally, is that mpage_readpages() does a : GFP_KERNEL allocation, rather than paying attention to the inode's : mapping gfp mask, which is set to GFP_NOFS. : : The didn't used to happen, because the loop device used to issue : reads through the splice path and that does: : : error = add_to_page_cache_lru(page, mapping, index, : GFP_KERNEL & mapping_gfp_mask(mapping)); This has changed by commit aa4d86163e4 ("block: loop: switch to VFS ITER_BVEC"). This patch changes mpage_readpage{s} to follow gfp mask set for the mapping. There are, however, other places which are doing basically the same. lustre:ll_dir_filler is doing GFP_KERNEL from the function which apparently uses GFP_NOFS for other allocations so let's make this consistent. cifs:readpages_get_pages is called from cifs_readpages and __cifs_readpages_from_fscache called from the same path obeys mapping gfp. ramfs_nommu_expand_for_mapping is hardcoding GFP_KERNEL as well regardless it uses mapping_gfp_mask for the page allocation. ext4_mpage_readpages is the called from the page cache allocation path same as read_pages and read_cache_pages As I've noticed in my previous post I cannot say I would be happy about sprinkling mapping_gfp_mask all over the place and it sounds like we should drop gfp_mask argument altogether and use it internally in __add_to_page_cache_locked that would require all the filesystems to use mapping gfp consistently which I am not sure is the case here. From a quick glance it seems that some file system use it all the time while others are selective. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dave Chinner <david@fromorbit.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Ming Lei <ming.lei@canonical.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-16rbd: use writefull op for object size writesIlya Dryomov
This covers only the simplest case - an object size sized write, but it's still useful in tiering setups when EC is used for the base tier as writefull op can be proxied, saving an object promotion. Even though updating ceph_osdc_new_request() to allow writefull should just be a matter of fixing an assert, I didn't do it because its only user is cephfs. All other sites were updated. Reflects ceph.git commit 7bfb7f9025a8ee0d2305f49bf0336d2424da5b5b. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-10-16rbd: set max_sectors explicitlyIlya Dryomov
Commit 30e2bc08b2bb ("Revert "block: remove artifical max_hw_sectors cap"") restored a clamp on max_sectors. It's now 2560 sectors instead of 1024, but it's not good enough: we set max_hw_sectors to rbd object size because we don't want object sized I/Os to be split, and the default object size is 4M. So, set max_sectors to max_hw_sectors in rbd at queue init time. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-10-16mlxsw: spectrum: Add initial support for Spectrum ASICJiri Pirko
Add support for new generation Mellanox Spectrum ASIC, 10/25/40/50 and 100Gb/s Ethernet Switch. The initial driver implements bridge forwarding offload including bridge internal VLAN support, FDB static entries, FDB learning and HW ageing including their setup. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Port VLAN MAC Learning register definitionIdo Schimmel
Since we currently do not support the offloading of 802.1D bridges, we need to be able to let the device know it should not learn MAC addresses on specific {Port, VID} pairs. Add the SPVMLR register, which controls the learning enablement of {Port, VID} pairs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Filtering Database Aging Time register definitionJiri Pirko
Add SFDAT which is used to control switch ageing time. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Virtual-Port Enabling register definitionIdo Schimmel
In order for a port to support {Port, VID} to FID mapping it needs to be configured to a virtual port mode (as opposed to VLAN mode). Add the SVPE register, which enables port virtualization. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch VID to FID Allocation register definitionIdo Schimmel
An incoming packet can be classified into a filtering identifer (FID) based on its VID or incoming port and VID ({Port, VID}). Add the SVFA register, which controls this mapping. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FID Management register definitionIdo Schimmel
Filtering identifiers (FIDs) are unique identifers of bridge instances in the hardware. Add the SFMR register, which is responsible for the creation and configuration of these FIDs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add shared buffer configuration registers definitionsJiri Pirko
Add definitions of SBPR, SBCM, SBPM, SBMM and PBMC registers that are used to configure shared buffers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers ↵Elad Raz
definitions Add SPVID and SPVM registers responsible for default port VID configuration and VLAN membership of a port. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FDB Notification register definitionJiri Pirko
Add SFN register which is used to poll for newly added and aged-out FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Filtering Database register definitionJiri Pirko
Add the SFD register which is responsible for filtering database manipulation, including static and dynamic FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Add MLXSW_ITEM_BUF_INDEXED helperJiri Pirko
Add missing item helper which allows to access char bufs on multiple offsets. This is needed by SFD and SFN register definitions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Make src arg of memcpy_to helper constJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce FID-offset flooding tablesIdo Schimmel
Packets destined to offloaded netdevs will be classified to FIDs in the device and flooded in case of BUM. The flooding table used is of type FID-offset, which allows one to create different flooding domains for different FIDs and specify the offset in the flooding table for each FID (not necessarily equal to FID or VID). Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce per-FID flooding tablesIdo Schimmel
In the newly introduced Spectrum switch ASIC, packets destined to not offloaded netdevs will be classified to special FIDs (vFIDs) in the device and flooded to the CPU port. The flooding table used is of type per-FID, which allows one to create different flooding domains for different vFIDs. While using a simple single-entry flood table is certainly sufficient at this point, we do plan to offload 802.1D bridges involving VLAN interfaces, thus making this change necessary. Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Enable configuration of flooding domainsIdo Schimmel
As part of the introduction of L2 offloads, allow different ports to join/leave the flooding domain, according to user configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16Merge branches 'acpica', 'pm-domains' and 'pm-cpufreq'Rafael J. Wysocki
* acpica: ACPICA: Tables: Fix FADT dependency regression * pm-domains: PM / Domains: Fix validation of latency constraints in genpd governor * pm-cpufreq: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL)
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-10 01:24:40 +0000