summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2018-10-15scsi: esp_scsi: move dma mapping into the core codeChristoph Hellwig
Except for the mac_esp driver, which uses PIO or pseudo DMA, all drivers share the same dma mapping calls. Move the dma mapping into the core code using the scsi_dma_map / scsi_dma_unmap helpers, with a special identify mapping variant triggered off a new ESP_FLAG_NO_DMA_MAP flag for mac_esp. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15scsi: esp_scsi: remove the dev argument to scsi_esp_registerChristoph Hellwig
We can simplify use esp->dev now. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15scsi: esp_scsi: use strong typing for the dev fieldChristoph Hellwig
esp->dev is a void pointer that points either to a struct device, or a struct platform_device. As we can easily get from the device to the platform_device if needed change it to always point to a struct device and properly type the pointer to avoid errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15scsi: sun_esp: don't use GFP_ATOMIC for command block allocationChristoph Hellwig
esp_sbus_map_command_block is called straight from the probe routine without any locks held, so we can safely use GFP_KERNEL here. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15scsi: am53c974: use the generic DMA APIChristoph Hellwig
Remove usage of the legacy PCI DMA API. To make this easier we also store a struct device instead of pci_dev in the dev field of struct esp. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15scsi: ufs: make UFS Tx lane1 clock optional for QCOM platformsVenkat Gopalakrishnan
Per Qcom's UFS host controller HW design, the UFS Tx lane1 clock could be muxed with Tx lane0 clock, hence keep Tx lane1 clock optional by ignoring it if it is not provided in device tree. This change also performs some cleanup to lanes per direction checks when enable/disable lane clocks just for symmetry. Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15scsi: lpfc: remove a bogus pci_dma_sync_single_for_device callChristoph Hellwig
dma_alloc_coherent allocates memory that can be used by the cpu and the device at the same time, calls to pci_dma_sync_* are not required, and in fact actively harmful on some architectures like arm. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15scsi: megaraid_mbox: remove bogus use of pci_dma_sync_sg_* APIsChristoph Hellwig
The dma_map_sg / dma_unmap_sg APIs called from scsi_dma_map / scsi_dma_unmap already transfer memory ownership to the device or cpu respectively. Adding additional calls to pci_dma_sync_sg_* will in fact lead to data corruption if we end up using swiotlb for some reason. Also remove the now pointless megaraid_mbox_sync_scb function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: arcmsr: clean up clang warning on extraneous parenthesesColin Ian King
There are extraneous parantheses that are causing clang to produce a warning so remove these. Clean up 3 clang warnings: equality comparison with extraneous parentheses [-Wparentheses-equality] Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: ufs-bsg: Add support for uic commands in ufs_bsg_request()Avri Altman
Make ufshcd_send_uic_cmd() public for that. Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: ufs-bsg: Add support for raw upiu in ufs_bsg_request()Avri Altman
Do that for the currently supported UPIUs: query, nop out, and task management. We do not support UPIU of type scsi command yet, while we are using the job's request and reply pointers to hold the payload. We will look into it in later patches. We might need to elaborate the raw upiu api for that. We also still not supporting uic commands: For first phase, we plan to use the existing api, and send only uic commands that are already supported. Anyway, all that will come in the next patch. Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: ufs: Add API to execute raw upiu commandsAvri Altman
The UFS host software uses a combination of a host register set and Transfer Request Descriptors in system memory to communicate with host controller hardware. In its mmio space, a separate places are assigned to UTP Transfer Request Descriptor ("utrd") list, and to UTP Task Management Request Descriptor ("utmrd") list. The provided API supports utrd-typed requests: nop out and device management commands. It also supports utmrd-type requests: task management requests. Other UPIU types are not supported for now. We utilize the already existing code for tag and task work queues. That is, all utrd-typed UPIUs are "disguised" as device management commands. Similarly, the utmrd-typed UPUIs uses the task management infrastructure. It is up to the caller to fill the upiu request properly, as it will be copied without any further input validations. Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: ufs: Use data structure size in pointer arithmeticAvri Altman
Use the structure size in pointer arithmetic instead of an opaque 32 bytes for the over-allocation of descriptors. Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: ufs: Add a bsg endpoint that supports UPIUsAvri Altman
For now, just provide an API to allocate and remove ufs-bsg node. We will use this framework to manage ufs devices by sending UPIU transactions. For the time being, implements an empty bsg_request() - will add some more functionality in coming patches. Nonetheless, we reveal here the protocol we are planning to use: UFS Transport Protocol Transactions. UFS transactions consist of packets called UFS Protocol Information Units (UPIU). There are UPIU’s defined for UFS SCSI commands, responses, data in and data out, task management, utility functions, vendor functions, transaction synchronization and control, and more. By using UPIUs, we get access to the most fine-grained internals of this protocol, and able to communicate with the device in ways, that are sometimes beyond the capacity of the ufs driver. Moreover and as a result, our core structure - ufs_bsg_node has a pretty lean structure: using upiu transactions that contains the outmost detailed info, so we don't really need complex constructs to support it. Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: uapi: ufs: Make utp_upiu_req visible to user spaceAvri Altman
in preparation to send UPIU requests via bsg. Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: ufs: add a low-level __ufshcd_issue_tm_cmd helperChristoph Hellwig
Add a helper that takes a utp_task_req_desc and issues it, which will be useful for UFS bsg support. Rewrite ufshcd_issue_tm_cmd0x to use this new helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: ufs: cleanup struct utp_task_req_descChristoph Hellwig
Remove the pointless task_req_upiu and task_rsp_upiu indirections, which are __le32 arrays always cast to given structures and just add the members directly. Also clean up variables names in use in the callers a bit to make the code more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: snic: Replace spin_is_locked() with lockdepLance Roy
lockdep_assert_held() is better suited to checking locking requirements, since it won't get confused when someone else holds the lock. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Cc: Karan Tilak Kumar <kartilak@cisco.com> Cc: Sesidhar Baddela <sebaddel@cisco.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: <linux-scsi@vger.kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Remove unnecessary parentheses and simplify null checksNathan Chancellor
Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((ioc == NULL)) ~~~~^~~~~~~ drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: note: remove extraneous parentheses around the comparison to silence this warning if ((ioc == NULL)) ~ ^ ~ drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: note: use '=' to turn this equality comparison into an assignment if ((ioc == NULL)) ^~ = drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((pdev == NULL)) ~~~~~^~~~~~~ drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: note: remove extraneous parentheses around the comparison to silence this warning if ((pdev == NULL)) ~ ^ ~ drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: note: use '=' to turn this equality comparison into an assignment if ((pdev == NULL)) ^~ = 2 warnings generated. Remove them and while we're at it, simplify the NULL checks as '!var' is used more than 'var == NULL'. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Use dma_pool_zallocSouptick Joarder
Replaced dma_pool_alloc + memset with dma_pool_zalloc. Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Remove unused macro MPT3SAS_FMTJoe Perches
All the uses have been removed, delete the macro. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Convert logging uses with MPT3SAS_FMT without logging levelsJoe Perches
Convert these uses to ioc_<level> where appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Remove KERN_WARNING from panic usesJoe Perches
Remove the logging level as panic calls stop the machine and should always be emitted regardless of requested logging level. These existing panic uses are perhaps inappropriate. Miscellanea: o Coalesce formats and convert MPT3SAS_FMT to "%s: " to improve clarity Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Convert logging uses with MPT3SAS_FMT and reply_q_name to %s:Joe Perches
Convert the existing 2 uses to make the format and arguments matching more obvious. Miscellanea: o Move the word "enabled" into the format to trivially reduce object size o Remove unnecessary parentheses Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Convert mlsleading uses of pr_<level> with MPT3SAS_FMTJoe Perches
These have misordered uses of __func__ and ioc->name that could mismatch MPT3SAS_FMT and "%s: ". Convert them to ioc_<level>. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Convert uses of pr_<level> with MPT3SAS_FMT to ioc_<level>Joe Perches
Use a more common logging style. Done using the perl script below and some typing $ git grep --name-only -w MPT3SAS_FMT -- "*.c" | \ xargs perl -i -e 'local $/; while (<>) { s/\bpr_(info|err|notice|warn)\s*\(\s*MPT3SAS_FMT\s*("[^"]+"(?:\s*\\?\s*"[^"]+"\s*){0,5}\s*),\s*ioc->name\s*/ioc_\1(ioc, \2/g; print;}' Miscellanea for these conversions: o Coalesce formats o Realign arguments o Remove unnecessary parentheses o Use casts to u64 instead of unsigned long long where appropriate o Convert broken pr_info uses to pr_cont o Fix broken format string concatenation with line continuations and excess whitespace Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Add ioc_<level> logging macrosJoe Perches
These macros can help identify specific logging uses and eventually perhaps reduce object sizes. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: qla2xxx: Return switch command on a timeoutHimanshu Madhani
This patch fixes commit bcc71cc3cde1 ("scsi: qla2xxx: Fix for double free of SRB structure") which placed code in wrong routines. Also updated the use of WARN_ON() to WARN_ON_ONCE() to prevent flooding log messages. Fixes: bcc71cc3cde1 ("scsi: qla2xxx: Fix for double free of SRB structure") Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Check for bus resetFinn Thain
The SR_RST bit isn't latched. Hence, detecting a bus reset isn't reliable. When it is detected, the right thing to do is to drop all connected and disconnected commands. The code for that is already present so refactor it and call it when SR_RST is set. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Handle BUS FREE during reselectionFinn Thain
The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out procedure", that a target may assert RST or go to BUS FREE phase if the initiator does not respond within 200 us. Something like this has been observed with AztecMonster II target. When it happens, all we can do is wait for the target to try again. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Don't call dsprintk() following reselection interruptFinn Thain
The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", ... The reselected initiator shall then assert the BSY signal within a selection abort time of its most recent detection of being reselected; this is required for correct operation of the time-out procedure. The selection abort time is only 200 us which may be insufficient time for a printk() call. Move the diagnostics to the error paths. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Don't clear busy flag when abort failsFinn Thain
When NCR5380_abort() returns FAILED, the driver forgets that the target is still busy. Hence, further commands may be sent to the target, which may fail during selection and produce the error message, "reselection after won arbitration?". Prevent this by leaving the busy flag set when NCR5380_abort() fails. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Check for invalid reselection targetFinn Thain
The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", that "the initiator shall not respond to a RESELECTION phase if other than two SCSI ID bits are on the DATA BUS." This issue (too many bits set) has been observed in the wild, so add a check. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense dataFinn Thain
When sense data is valid, call set_driver_byte(cmd, DRIVER_SENSE). Otherwise some callers of scsi_execute() will ignore sense data. Don't set DID_ERROR or DID_RESET just because sense data is missing. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSEFinn Thain
This is mostly needed because an AztecMonster II target has been observed disconnecting REQUEST SENSE commands and then failing to reselect properly. Suggested-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Have NCR5380_select() return a boolFinn Thain
The return value is taken to mean "retry" or "don't retry". Change it to bool to improve readability. Fix related comments. No functional change. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Reduce goto statements in NCR5380_select()Finn Thain
Replace a 'goto' statement with a simple 'return' where possible. This improves readability. No functional change. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: NCR5380: Clear all unissued commands on host resetHannes Reinecke
When doing a host reset we should be clearing all outstanding commands, not just the command triggering the reset. [mkp: adjusted Hannes' SoB address] Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Ondrey Zary <linux@rainbow-software.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: qla4xxx: Remove redundant check on drvr_waitColin Ian King
The check for a non-zero drvr_wait is redundant as the same check is performed earlier in the outer while loop, the inner check will always be true if we reached this point inside the while loop. Remove the redundant if check. Detected by cppcheck: (warning) Identical inner 'if' condition is always true. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Move log messages before issuing command to firmwareGiridhar Malavali
There is a probability that the SRB structure might have been released by the time the debug log message dereferences it. This patch moved the log messages before the command is issued to the firmware to prevent unknown behavior and kernel crash Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix for double free of SRB structureGiridhar Malavali
This patch fixes issue during switch command query where driver was freeing SRB resources multiple times Following stack trace will be seen [ 853.436234] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 853.436348] IP: [<ffffffff811df514>] kmem_cache_alloc+0x74/0x1e0 [ 853.436476] PGD 0 [ 853.436601] Oops: 0000 [#1] SMP [ 853.454700] [<ffffffff81099f6a>] ? mod_timer+0x14a/0x220 [ 853.455543] [<ffffffff81185465>] mempool_alloc_slab+0x15/0x20 [ 853.456395] [<ffffffff811855a9>] mempool_alloc+0x69/0x170 [ 853.457257] [<ffffffff81098af2>] ? internal_add_timer+0x32/0x70 [ 853.458136] [<ffffffffc0092d2b>] qla2xxx_queuecommand+0x29b/0x3f0 [qla2xxx] [ 853.459024] [<ffffffff8146535a>] scsi_dispatch_cmd+0xaa/0x230 [ 853.459923] [<ffffffff8146e11f>] scsi_request_fn+0x4df/0x680 [ 853.460829] [<ffffffff81029557>] ? __switch_to+0xd7/0x510 [ 853.461747] [<ffffffff812f7113>] __blk_run_queue+0x33/0x40 [ 853.462670] [<ffffffff812f7735>] blk_delay_work+0x25/0x40 [ 853.463603] [<ffffffff810a882a>] process_one_work+0x17a/0x440 [ 853.464546] [<ffffffff810a94f6>] worker_thread+0x126/0x3c0 [ 853.465501] [<ffffffff810a93d0>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 853.466447] [<ffffffff810b099f>] kthread+0xcf/0xe0 [ 853.467379] [<ffffffff810b08d0>] ? insert_kthread_work+0x40/0x40 [ 853.470172] Code: db e2 7e 49 8b 50 08 4d 8b 20 49 8b 40 10 4d 85 e4 0f 84 20 01 00 00 48 85 c0 0f 84 17 01 00 00 49 63 46 20 48 8d 4a 01 4d 8b 06 <49> 8b 1c 04 4c 89 e0 65 49 0f c7 08 0f 94 c0 84 c0 74 ba 49 63 [ 853.472072] RIP [<ffffffff811df514>] kmem_cache_alloc+0x74/0x1e0 [ 853.472971] RSP <ffff88103726fc50> Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix recursive mailbox timeoutQuinn Tran
This patch prevents user space mailbox request from doing chip reset if the mailbox timed out. The chip reset is only reserved for the DPC thread to ensure all mailbox requests are flushed properly. The DPC thread is responsible for the flushing all MBs and chip reset. Fixes: b2000805a975 ("scsi: qla2xxx: Flush mailbox commands on chip reset") Cc: <stable@ger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix driver hang when FC-NVMe LUNs are configuredHimanshu Madhani
This patch fixes multiple call for qla_nvme_unregister_remote_port() as part of qlt_schedule_session_for_deletion(), Do not call it again during qla_nvme_delete() Fixes: e473b3074104 ("scsi: qla2xxx: Add FC-NVMe abort processing") Cc: <stable@vger.kernel.org> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix re-using LoopID when handle is in useQuinn Tran
This patch fixes issue where driver clears NPort ID map instead of marking handle in use. Once driver clears NPort ID from the database, it can reuse the same NPort ID resulting in a PLOGI failure. [mkp: fixed Himanshu's SoB] Fixes: a084fd68e1d2 ("scsi: qla2xxx: Fix re-login for Nport Handle in use") Cc: <stable@vger.kernel.org> Signed-of-by: Quinn Tran <quinn.tran@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <hmadhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix duplicate switch database entriesQuinn Tran
The response data buffer used in switch scan is reused 4 times. (For example, for commands GPN_FT, GNN_FT for FCP and FC-NVME) Before driver reuses this buffer, clear it to prevent duplicate entries in our database. Fixes: a4239945b8ad1 ("scsi: qla2xxx: Add switch command to simplify fabric discovery" Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix NVMe Target discoveryQuinn Tran
This patch fixes issue when remoteport registers itself as both FCP and FC-NVMe with the switch, driver will pick FC-NVMe personality as default when scanning for targets. Driver was using comaprative operator instead of bitwise operator to check for fc4_type for both FCP and FC-NVME. Fixes: 2b5b96473efc ("scsi: qla2xxx: Fix FC-NVMe LUN discovery") Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix NVMe session hang on unloadQuinn Tran
Send aborts only when chip is active. Fixes: 623ee824e579 ("scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset") Cc: <stable@vger.kernel.org> # 4.14 Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: don't allow negative thresholdsDan Carpenter
We shouldn't allow negative thresholds. I don't know what it would do but it can't be good. Fixes: 8b4673ba3a1b ("scsi: qla2xxx: Add support for ZIO6 interrupt threshold") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-27scsi: qla2xxx: Fix comment in MODULE_PARM_DESC in qla2xxxMasanari Iida
Default value of ql2xasynctmfenable for qla2xxx driver was set to 1 in commit 043dc1d7e850 ("scsi: qla2xxx: Enable Async TMF processing") but comment in MODULE_PARAM_DESC was not modified. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-25scsi: libsas: fix a race condition when smp task timeoutJason Yan
When the lldd is processing the complete sas task in interrupt and set the task stat as SAS_TASK_STATE_DONE, the smp timeout timer is able to be triggered at the same time. And smp_task_timedout() will complete the task wheter the SAS_TASK_STATE_DONE is set or not. Then the sas task may freed before lldd end the interrupt process. Thus a use-after-free will happen. Fix this by calling the complete() only when SAS_TASK_STATE_DONE is not set. And remove the check of the return value of the del_timer(). Once the LLDD sets DONE, it must call task->done(), which will call smp_task_done()->complete() and the task will be completed and freed correctly. Reported-by: chenxiang <chenxiang66@hisilicon.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-26 05:37:25 +0000