summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-tegra30.c
AgeCommit message (Collapse)Author
2015-03-09pinctrl: tegra: some bits move between registersStephen Warren
Some of the pinmux configuration bits that exist in "drive group" registers in Tegra30..Tegra124 move to the "pinmux" registers on future chips. Add a flag to support this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09pinctrl: tegra: driver layout/consistency fixesStephen Warren
Various non-semantic tweaks and layout/consistency fixes for existing Tegra pinctrl drivers. Move the definition of DRV_PINGROUP_REG() before the definition of PINGROUP() so that a future SoC driver can invoke the former from the latter. PINGROUP_BIT_Y(n) is just n, so replace it with n. Re-wrap the parameters to *PINGROUP(). Keep various enums sorted in the Tegra124 driver. Various white-space consistency fixes. These changes aim to update existing drivers to be consistent with future SoC drivers. While we could ignore these tweaks to the existing drivers, I'd like to keep everything as consistent as possible for easy comparison. Besides, I auto-generate the drivers, and maintaining special-cases to keep the differences in place is annoying. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-20pinctrl: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-29pinctrl: Make of_device_id array constKiran Padwal
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Kiran Padwal <kiran.padwal21@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22pinctrl: tegra: remove fsafe from data tablesStephen Warren
The fsafe value in the pingroup data tables is only used to implement tegra_pinctrl_disable(). The only reason this function is called is when dynamically switching between pinmux states, i.e. when disabling the old state before programming the new state. It's simpler to have the new target state define the expected value of each pin (and all current DTs do that). This also gives more flexibility, since it allows individual boards explicit control over the "inactive" mux function for each pin, rather than requiring it to be an SoC-specific value. Assuming this, we can get rid of the fsafe value from the driver completely, thus saving some more space in the driver tables. While re-writing the content of tegra124_pingroups[], fix the indentation to use a TAB instead of spaces. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22pinctrl: tegra: remove redundant data table fieldsStephen Warren
Any SoC which supports the einput, odrain, lock, ioreset, or rcv_sel options has the relevant HW register fields in the same register as the mux function selection. Similarly, the drvtype option is always in the drive register, if it is supported at all. Hence, we don't need to have struct *_reg fields in the pin group table to define which register and bank to use for those options. Delete this to save space in the driver's data tables. However, many of those options are not supported on all SoCs, or not supported on some pingroups. We need a way to detect when they are supported. Previously, this was indicated by setting the struct *_reg field to -1. With the struct *_reg fields removed, we use the struct *_bit fields for this purpose instead. The struct *_bit fields need to be expanded from 5 to 6 bits in order to store a value outside the valid HW bit range of 0..31. Even without removing the struct *_reg fields, we still need to add code to validate the struct *_bit fields, since some struct *_bit fields were already being set to -1, without an option-specific struct *_reg field to "guard" them. In other words, before this change, the pinmux driver might allow some unsupported options to be written to HW. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: tegra: consistency cleanupStephen Warren
Fix Tegra30/114/124 pinmux drivers consistency issues. * Sort all lists of the same object type (e.g. #defines for pins, and the array that defines their names) in the same order. * Whitespace fixes. * Consistency in layout between the 3 drivers. These driver files were also auto-generated, which should allow us to make e.g. the U-Boot drivers completely consistent with the kernel in the future:-) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: tegra: dynamically calculate function list of groupsStephen Warren
The per-SoC data structures for Tegra pinctrl stored some information in a redundant way. Specifically, the list of groups that each function could be muxed onto was stored once explicitly, and also as part of the definition of each group. Eliminate this redundancy, and calculate each function's list of valid groups at pinctrl probe time. This removes thousands of lines of code from the pinctrl driver and ~16K from the vmlinux binary size, and adds only about 500uS to the boot process (on Tegra30; newer SoCs will likely be faster still). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: tegra: init Tegra20/30 at module_init timeStephen Warren
The Tegra20/30 pinctrl drivers currently initializes at arch_initcall, whereas Tegra114/124 pinctrl drivers initialize at module_init time. Convert Tegra20/30 to work the same way as the other drivers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-18pinctrl: tegra: add support for rcv-sel and drive typePritesh Raithatha
NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e. rcv-sel and drive type. rcv-sel: Select between High and Normal VIL/VIH receivers. RCVR_SEL=1: High VIL/VIH RCVR_SEL=0: Normal VIL/VIH drv_type: Ouptput drive type: 33-50 ohm driver: 0x1 66-100ohm driver: 0x0 Add support of these parameters to be configure from DTS file. Tegra20 and Tegra30 does not support this configuration and hence initialize their pinmux structure with reg = -1. Originally written by Pritesh Raithatha. Changes by ldewangan: - remove drvtype_width as it is always 2. - Better describe the change. Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-03Drivers: pinctrl: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Barry Song <baohua.song@csr.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pinctrl: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pinctrl: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17pinctrl: tegra: correct bank for pingroup and drv pingroupPritesh Raithatha
Cc: stable@kernel.org Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: tegra: refactor probe handlingStephen Warren
Rather than having a single tegra-pinctrl driver that determines whether it's running on Tegra20 or Tegra30, instead have separate drivers for each that call into utility functions to implement the majority of the driver. This change is based on review feedback of the SPEAr pinctrl driver, which had originally copied to Tegra driver structure. This requires that the two drivers have unique names. Update a couple spots in arch/arm/mach-tegra for the name change. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-06pinctrl: add a driver for NVIDIA TegraStephen Warren
This adds a driver for the Tegra pinmux, and required parameterization data for Tegra20 and Tegra30. The driver is initially added with driver name and device tree compatible value that won't cause this driver to be used. A later change will switch the pinctrl driver to use the correct values, switch the old pinmux driver to be disabled, and update all code that uses the old pinmux APIs to use the new pinctrl APIs. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> [squashed "fix case of Tegra30's foo_groups[] arrays"] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>