summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/pensando
AgeCommit message (Collapse)Author
2023-07-23ionic: remove WARN_ON to prevent panic_on_warnNitya Sunkad
[ Upstream commit abfb2a58a5377ebab717d4362d6180f901b6e5c1 ] Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. Fixes: 77ceb68e29cc ("ionic: Add notifyq support") Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ionic: catch failure from devlink_allocShannon Nelson
[ Upstream commit 4a54903ff68ddb33b6463c94b4eb37fc584ef760 ] Add a check for NULL on the alloc return. If devlink_alloc() fails and we try to use devlink_priv() on the NULL return, the kernel gets very unhappy and panics. With this fix, the driver load will still fail, but at least it won't panic the kernel. Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ionic: remove noise from ethtool rxnfc error msgShannon Nelson
[ Upstream commit 3711d44fac1f80ea69ecb7315fed05b3812a7401 ] It seems that ethtool is calling into .get_rxnfc more often with ETHTOOL_GRXCLSRLCNT which ionic doesn't know about. We don't need to log a message about it, just return not supported. Fixes: aa3198819bea6 ("ionic: Add RSS support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-03ionic: refactor use of ionic_rx_fill()Neel Patel
[ Upstream commit e55f0f5befc26e2ba6bb8c1f945ea8e37ee0e334 ] The same pre-work code is used before each call to ionic_rx_fill(), so bring it in and make it a part of the routine. Signed-off-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-14ionic: clean interrupt before enabling queue to avoid credit raceNeel Patel
[ Upstream commit e8797a058466b60fc5a3291b92430c93ba90eaff ] Clear the interrupt credits before enabling the queue rather than after to be sure that the enabled queue starts at 0 and that we don't wipe away possible credits after enabling the queue. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Neel Patel <neel.patel@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-26net: ionic: Fix error handling in ionic_init_module()Yuan Can
[ Upstream commit 280c0f7cd0aa4d190619b18243110e052a90775c ] A problem about ionic create debugfs failed is triggered with the following log given: [ 415.799514] debugfs: Directory 'ionic' with parent '/' already present! The reason is that ionic_init_module() returns ionic_bus_register_driver() directly without checking its return value, if ionic_bus_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ionic can never be created later. ionic_init_module() ionic_debugfs_create() # create debugfs directory ionic_bus_register_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when ionic_bus_register_driver() returns error. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29ionic: catch NULL pointer issue on reconfigBrett Creeley
[ Upstream commit aa1d7e1267c12e07d979aa34c613716a89029db2 ] It's possible that the driver will dereference a qcq that doesn't exist when calling ionic_reconfigure_queues(), which causes a page fault BUG. If a reduction in the number of queues is followed by a different reconfig such as changing the ring size, the driver can hit a NULL pointer when trying to clean up non-existent queues. Fix this by checking to make sure both the qcqs array and qcq entry exists bofore trying to use and free the entry. Fixes: 101b40a0171f ("ionic: change queue count with no reset") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31ionic: VF initial random MAC address if no assigned macR Mohamed Shah
[ Upstream commit 19058be7c48ceb3e60fa3948e24da1059bd68ee4 ] Assign a random mac address to the VF interface station address if it boots with a zero mac address in order to match similar behavior seen in other VF drivers. Handle the errors where the older firmware does not allow the VF to set its own station address. Newer firmware will allow the VF to set the station mac address if it hasn't already been set administratively through the PF. Setting it will also be allowed if the VF has trust. Fixes: fbb39807e9ae ("ionic: support sr-iov operations") Signed-off-by: R Mohamed Shah <mohamed@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31ionic: fix up issues with handling EAGAIN on FW cmdsShannon Nelson
[ Upstream commit 0fc4dd452d6c14828eed6369155c75c0ac15bab3 ] In looping on FW update tests we occasionally see the FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop waiting for the FW activate step to finsh inside the FW. The firmware is complaining that the done bit is set when a new dev_cmd is going to be processed. Doing a clean on the cmd registers and doorbell before exiting the wait-for-done and cleaning the done bit before the sleep prevents this from occurring. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31ionic: clear broken state on generation changeShannon Nelson
[ Upstream commit 9cb9dadb8f45c67e4310e002c2f221b70312b293 ] There is a case found in heavy testing where a link flap happens just before a firmware Recovery event and the driver gets stuck in the BROKEN state. This comes from the driver getting interrupted by a FW generation change when coming back up from the link flap, and the call to ionic_start_queues() in ionic_link_status_check() fails. This can be addressed by having the fw_up code clear the BROKEN bit if seen, rather than waiting for a user to manually force the interface down and then back up. Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31ionic: widen queue_lock use around lif init and deinitShannon Nelson
[ Upstream commit 2624d95972dbebe5f226361bfc51a83bdb68c93b ] Widen the coverage of the queue_lock to be sure the lif init and lif deinit actions are protected. This addresses a hang seen when a Tx Timeout action was attempted at the same time as a FW Reset was started. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17net: ionic: fix error check for vlan flags in ionic_set_nic_features()Jian Shen
[ Upstream commit a86e86db5e6d72c82724a63ca1c5293409a21518 ] The prototype of input features of ionic_set_nic_features() is netdev_features_t, but the vlan_flags is using the private definition of ionic drivers. It should use the variable ctx.cmd.lif_setattr.features, rather than features to check the vlan flags. So fixes it. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18ionic: fix missing pci_release_regions() on error in ionic_probe()Yang Yingliang
[ Upstream commit e4b1045bf9cfec6f70ac6d3783be06c3a88dcb25 ] If ionic_map_bars() fails, pci_release_regions() need be called. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220506034040.2614129-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08ionic: Don't send reset commands if FW isn't runningBrett Creeley
[ Upstream commit b8fd0271dad00b953caaabe73474788d3d19e252 ] It's possible the FW is already shutting down while the driver is being removed and/or when the driver is going through reset. This can cause unexpected/unnecessary errors to be printed: eth0: DEV_CMD IONIC_CMD_PORT_RESET (12) error, IONIC_RC_ERROR (29) failed eth1: DEV_CMD IONIC_CMD_RESET (3) error, IONIC_RC_ERROR (29) failed Fix this by checking the FW status register before issuing the reset commands. Also, since err may not be assigned in ionic_port_reset(), assign it a default value of 0, and remove an unnecessary log message. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08ionic: start watchdog after all is setupShannon Nelson
[ Upstream commit 9ad2939a1525962a79a2fd974ec7e3a71455b964 ] The watchdog expects the lif to fully exist when it goes off, so lets not start the watchdog until all is ready in case there is some quirky time dialation that makes probe take multiple seconds. Fixes: 089406bc5ad6 ("ionic: add a watchdog timer to monitor heartbeat") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08ionic: fix type complaint in ionic_dev_cmd_clean()Shannon Nelson
[ Upstream commit bc0bf9de6f48268f4ee59e57fb42ac751be3ecda ] Sparse seems to have gotten a little more picky lately and we need to revisit this bit of code to make sparse happy. warning: incorrect type in initializer (different address spaces) expected union ionic_dev_cmd_regs *regs got union ionic_dev_cmd_regs [noderef] __iomem *dev_cmd_regs warning: incorrect type in argument 2 (different address spaces) expected void [noderef] __iomem * got unsigned int * warning: incorrect type in argument 1 (different address spaces) expected void volatile [noderef] __iomem * got union ionic_dev_cmd * Fixes: d701ec326a31 ("ionic: clean up sparse complaints") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-05ionic: Initialize the 'lif->dbid_inuse' bitmapChristophe JAILLET
[ Upstream commit 140c7bc7d1195750342ea0e6ab76179499ae7cd7 ] When allocated, this bitmap is not initialized. Only the first bit is set a few lines below. Use bitmap_zalloc() to make sure that it is cleared before being used. Fixes: 6461b446f2a0 ("ionic: Add interrupts and doorbells") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-09ionic: don't remove netdev->dev_addr when syncing uc listShannon Nelson
Bridging, and possibly other upper stack gizmos, adds the lower device's netdev->dev_addr to its own uc list, and then requests it be deleted when the upper bridge device is removed. This delete request also happens with the bridging vlan_filtering is enabled and then disabled. Bonding has a similar behavior with the uc list, but since it also uses set_mac to manage netdev->dev_addr, it doesn't have the same the failure case. Because we store our netdev->dev_addr in our uc list, we need to ignore the delete request from dev_uc_sync so as to not lose the address and all hope of communicating. Note that ndo_set_mac_address is expressly changing netdev->dev_addr, so no limitation is set there. Fixes: 2a654540be10 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06ionic: move filter sync_needed bit setShannon Nelson
Move the setting of the filter-sync-needed bit to the error case in the filter add routine to be sure we're checking the live filter status rather than a copy of the pre-sync status. Fixes: 969f84394604 ("ionic: sync the filters in the work task") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28ionic: fix gathering of debug statsShannon Nelson
Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993b1e5 ("ionic: pull per-q stats work out of queue loops") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-03ionic: fix a sleeping in atomic bugDan Carpenter
This code is holding spin_lock_bh(&lif->rx_filters.lock); so the allocation needs to be atomic. Fixes: 969f84394604 ("ionic: sync the filters in the work task") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20210903131856.GA25934@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-03ionic: fix double use of queue-lockShannon Nelson
Deadlock seen in an instance where the hwstamp configuration is changed while the driver is running: [ 3988.736671] schedule_preempt_disabled+0xe/0x10 [ 3988.736676] __mutex_lock.isra.5+0x276/0x4e0 [ 3988.736683] __mutex_lock_slowpath+0x13/0x20 [ 3988.736687] ? __mutex_lock_slowpath+0x13/0x20 [ 3988.736692] mutex_lock+0x2f/0x40 [ 3988.736711] ionic_stop_queues_reconfig+0x16/0x40 [ionic] [ 3988.736726] ionic_reconfigure_queues+0x43e/0xc90 [ionic] [ 3988.736738] ionic_lif_config_hwstamp_rxq_all+0x85/0x90 [ionic] [ 3988.736751] ionic_lif_hwstamp_set_ts_config+0x29c/0x360 [ionic] [ 3988.736763] ionic_lif_hwstamp_set+0x76/0xf0 [ionic] [ 3988.736776] ionic_eth_ioctl+0x33/0x40 [ionic] [ 3988.736781] dev_ifsioc+0x12c/0x420 [ 3988.736785] dev_ioctl+0x316/0x720 This can be demonstrated with "ptp4l -m -i <intf>" To fix this, we pull the use of the queue_lock further up above the callers of ionic_reconfigure_queues() and ionic_stop_queues_reconfig(). Fixes: 7ee99fc5ed2e ("ionic: pull hwstamp queue_lock up a level") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: recreate hwstamp queues on ifupShannon Nelson
The queues can be freed in ionic_close(). They need to be recreated after ionic_open(). It doesn't need to replay the whole config. It only needs to create the timestamping queues again. Signed-off-by: Allen Hubbe <allenbh@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: pull hwstamp queue_lock up a levelShannon Nelson
Move the hwstamp configuration use of queue_lock up a level to simplify use and error handling. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: add queue lock around open and stopShannon Nelson
Add the queue configuration lock to ionic_open() and ionic_stop() so that they don't collide with other in parallel queue configuration actions such as MTU changes as can be demonstrated with a tight loop of ifup/change-mtu/ifdown. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: fill mac addr earlier in add_addrShannon Nelson
Make sure the ctx struct has the new mac address before any save operations happen. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: squelch unnecessary fw halted messageShannon Nelson
Since the heartbeat check will already have complained about the firmware status, don't bother complaining about the DEVCMD failing. We'll keep the print message but demote it to a debug messages so that we normally no longer see it. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: fire watchdog again after fw_downShannon Nelson
In some cases of fw_down it was called because there was a fw_generation change, and the firmware is already back up. In order to keep the down time to a minimum, don't wait for the next watchdog polling cycle, fire another watchdog off as soon as we can - an out-of-cycle check won't hurt, and may well speed up the recovery. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ionic: handle mac filter overflowShannon Nelson
Make sure we go into PROMISC mode when we have too many filters by specifically counting the filters that successfully get saved to the firmware. The device advertises max_ucast_filters and max_mcast_filters, but really only has max_ucast_filters slots available for uc and mc filters combined. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ionic: refactor ionic_lif_addr to remove a layerShannon Nelson
The filter counting in ionic_lif_addr() really isn't useful, and potentially misleading, especially when we're checking in ionic_lif_rx_mode() to see if we need to go into PROMISC mode. We can safely refactor this and remove a calling layer. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ionic: sync the filters in the work taskShannon Nelson
In order to separate the atomic needs of __dev_uc_sync() and __dev_mc_sync() from the safe rx_mode handling, we need to have the ndo handler manipulate the driver's filter list, and later have the driver sync the filters to the firmware, outside of the atomic context. Here we put __dev_mc_sync() and __dev_uc_sync() back into the ndo callback to give them their netif_addr_lock context and have them update the driver's filter list, flagging changes that should be made to the device filter list. Later, in the rx_mode handler, we read those hints and sync up the device's list as needed. It is possible for multiple add/delete requests to come from the stack before the rx_mode task processes the list, but the handling of the sync status flag should keep everything sorted correctly. For example, if a delete of an existing filter is followed by another add before the rx_mode task is run, as can happen when going in and out of a bond, the add will cancel the delete and no actual changes will be sent to the device. We also add a check in the watchdog to see if there are any stray unsync'd filters, possibly left over from a filter overflow and waiting to get sync'd after some other filter gets removed to make room. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ionic: flatten calls to set-rx-modeShannon Nelson
Since only two functions call through ionic_set_rx_mode(), one that can sleep and one that can't, we can split the function and put the bits of code into the callers. This removes an unnecessary calling layer. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ionic: remove old work task typesShannon Nelson
With the move of mac filter handling to outside of the ndo_rx_mode context using the IONIC_DW_TYPE_RX_MODE, we no longer are using IONIC_DW_TYPE_RX_ADDR_ADD and IONIC_DW_TYPE_RX_ADDR_DEL and they can be removed. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27ionic: add function tag to debug stringShannon Nelson
Prefix the log output with the function string as in other debug messages. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: enable rxhash only with multiple queuesShannon Nelson
If there's only one queue, there is no need to enable the rxhashing. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: block some ethtool operations when fw in resetShannon Nelson
There are a few things that we can't safely do when the fw is resetting, as the driver may be in the middle of rebuilding queue structures. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: remove unneeded comp union fieldsShannon Nelson
We don't use these fields, so remove them from the definition. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: increment num-vfs before configureShannon Nelson
Add the new VF to our internal count before we start configuring it. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: use fewer inits on the buf_info structShannon Nelson
Based on Alex's review notes on [1], we don't need to write to the buf_info elements as often, and can tighten up how they are used. Also, use prefetchw() to warm up the page struct for a later get_page(). [1] https://lore.kernel.org/netdev/CAKgT0UfyjoAN7LTnq0NMZfXRv4v7iTCPyAb9pVr3qWMhop_BVw@mail.gmail.com/ Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: init reconfig err to 0Shannon Nelson
Initialize err to 0 instead of ENOMEM, and specifically set err to ENOMEM in the devm_kcalloc() failure cases. Also, add an error message to the end of reconfig. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: print firmware version on identifyShannon Nelson
Print the version of the DSC firmware seen when we do a fresh ident check. Because the FW can be updated by the external orchestration system, this helps us track that FW has been updated on the DSC. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: monitor fw status generationShannon Nelson
The top 4 bits of the fw_status in dev_info_regs is reserved for the status generation. This generation number is an arbitrary value defined when firmware starts up. If the FW is killed/crashed/stopped and then restarted, it will create a different generation number. With this mechanism, the host driver can detect that the FW has crashed and restarted, and the driver can then take steps to re-initialize its connection. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27ionic: minimize resources when under kdumpShannon Nelson
When running in a small kdump kernel, we can play nice and minimize our resource use to help make sure that kdump is successful in its mission. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ionic: count csum_none when offload enabledShannon Nelson
Be sure to count the csum_none cases when csum offload is enabled. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ionic: fix up dim accounting for tx and rxShannon Nelson
We need to count the correct Tx and/or Rx packets for dynamic interrupt moderation, depending on which we're processing on the queue interrupt. Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-29 11:37:17 +0000