summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)Author
2024-01-25media: cx231xx: fix a memleak in cx231xx_init_isocZhipeng Lu
[ Upstream commit 5d3c8990e2bbf929cb211563dadd70708f42e4e6 ] The dma_q->p_left_data alloced by kzalloc should be freed in all the following error handling paths. However, it hasn't been freed in the allocation error paths of dev->video_mode.isoc_ctl.urb and dev->video_mode.isoc_ctl.transfer_buffer. On the other hand, the dma_q->p_left_data did be freed in the error-handling paths after that of dev->video_mode.isoc_ctl.urb and dev->video_mode.isoc_ctl.transfer_buffer, by calling cx231xx_uninit_isoc(dev). So the same free operation should be done in error-handling paths of those two allocation. Fixes: 64fbf4445526 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25media: pvrusb2: fix use after free on context disconnectionRicardo B. Marliere
[ Upstream commit ded85b0c0edd8f45fec88783d7555a5b982449c1 ] Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack. Reported-and-tested-by: syzbot+621409285c4156a009b3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a02a4205fff8eb92@google.com/ Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload") Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28media: gspca: cpia1: shift-out-of-bounds in set_flickerRajeshwar R Shinde
[ Upstream commit 099be1822d1f095433f4b08af9cc9d6308ec1953 ] Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added. Reported-by: syzbot+e27f3dbdab04e43b9f73@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/20230818164522.12806-1-coolrrsh@gmail.com Link: https://syzkaller.appspot.com/bug?extid=e27f3dbdab04e43b9f73 Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: dvb-usb-v2: af9035: fix missing unlockHans Verkuil
[ Upstream commit f31b2cb85f0ee165d78e1c43f6d69f82cc3b2145 ] Instead of returning an error, goto the mutex unlock at the end of the function. Fixes smatch warning: drivers/media/usb/dvb-usb-v2/af9035.c:467 af9035_i2c_master_xfer() warn: inconsistent returns '&d->i2c_mutex'. Locked on : 326,387 Unlocked on: 465,467 Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 7bf744f2de0a ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23media: dvb-usb-v2: gl861: Fix null-ptr-deref in gl861_i2c_master_xferZhang Shurong
[ Upstream commit b97719a66970601cd3151a3e2020f4454a1c4ff6 ] In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23media: az6007: Fix null-ptr-deref in az6007_i2c_xfer()Zhang Shurong
[ Upstream commit 1047f9343011f2cedc73c64829686206a7e9fc3f ] In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach az6007_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23media: anysee: fix null-ptr-deref in anysee_master_xferZhang Shurong
[ Upstream commit c30411266fd67ea3c02a05c157231654d5a3bdc9 ] In anysee_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach anysee_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: add spaces around +] Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23media: af9005: Fix null-ptr-deref in af9005_i2c_xferZhang Shurong
[ Upstream commit f4ee84f27625ce1fdf41e8483fa0561a1b837d10 ] In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer()Zhang Shurong
[ Upstream commit 5ae544d94abc8ff77b1b9bf8774def3fa5689b5b ] In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 950e252cb469 ("[media] dw2102: limit messages to buffer size") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xferZhang Shurong
[ Upstream commit 7bf744f2de0a848fb1d717f5831b03db96feae89 ] In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org> [ moved variable declaration to fix build issues in older kernels - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19media: go7007: Remove redundant if statementColin Ian King
[ Upstream commit f33cb49081da0ec5af0888f8ecbd566bd326eed1 ] The if statement that compares msgs[i].len != 3 is always false because it is in a code block where msg[i].len is equal to 3. The check is redundant and can be removed. As detected by cppcheck static analysis: drivers/media/usb/go7007/go7007-i2c.c:168:20: warning: Opposite inner 'if' condition leads to a dead code block. [oppositeInnerCondition] Link: https://lore.kernel.org/linux-media/20230727174007.635572-1-colin.i.king@gmail.com Fixes: 866b8695d67e ("Staging: add the go7007 video driver") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()Christophe JAILLET
[ Upstream commit ea9ef6c2e001c5dc94bee35ebd1c8a98621cf7b8 ] 'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. Fixes: a2ab06d7c4d6 ("media: m920x: don't use stack on USB reads") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19drivers: usb: smsusb: fix error handling code in smsusb_init_deviceDongliang Mu
[ Upstream commit b9c7141f384097fa4fa67d2f72e5731d628aef7c ] The previous commit 4b208f8b561f ("[media] siano: register media controller earlier")moves siano_media_device_register before smscore_register_device, and adds corresponding error handling code if smscore_register_device fails. However, it misses the following error handling code of smsusb_init_device. Fix this by moving error handling code at the end of smsusb_init_device and adding a goto statement in the following error handling parts. Fixes: 4b208f8b561f ("[media] siano: register media controller earlier") Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23media: usb: siano: Fix warning due to null work_func_t function pointerDuoming Zhou
[ Upstream commit 6f489a966fbeb0da63d45c2c66a8957eab604bf6 ] The previous commit ebad8e731c1c ("media: usb: siano: Fix use after free bugs caused by do_submit_urb") adds cancel_work_sync() in smsusb_stop_streaming(). But smsusb_stop_streaming() may be called, even if the work_struct surb->wq has not been initialized. As a result, the warning will occur. One of the processes that could lead to warning is shown below: smsusb_probe() smsusb_init_device() if (!dev->in_ep || !dev->out_ep || align < 0) { smsusb_term_device(intf); smsusb_stop_streaming() cancel_work_sync(&dev->surbs[i].wq); __cancel_work_timer() __flush_work() if (WARN_ON(!work->func)) // work->func is null The log reported by syzbot is shown below: WARNING: CPU: 0 PID: 897 at kernel/workqueue.c:3066 __flush_work+0x798/0xa80 kernel/workqueue.c:3063 Modules linked in: CPU: 0 PID: 897 Comm: kworker/0:2 Not tainted 6.2.0-rc1-syzkaller #0 RIP: 0010:__flush_work+0x798/0xa80 kernel/workqueue.c:3066 ... RSP: 0018:ffffc9000464ebf8 EFLAGS: 00010246 RAX: 1ffff11002dbb420 RBX: 0000000000000021 RCX: 1ffffffff204fa4e RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff888016dda0e8 RBP: ffffc9000464ed98 R08: 0000000000000001 R09: ffffffff90253b2f R10: 0000000000000001 R11: 0000000000000000 R12: ffff888016dda0e8 R13: ffff888016dda0e8 R14: ffff888016dda100 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd4331efe8 CR3: 000000000b48e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __cancel_work_timer+0x315/0x460 kernel/workqueue.c:3160 smsusb_stop_streaming drivers/media/usb/siano/smsusb.c:182 [inline] smsusb_term_device+0xda/0x2d0 drivers/media/usb/siano/smsusb.c:344 smsusb_init_device+0x400/0x9ce drivers/media/usb/siano/smsusb.c:419 smsusb_probe+0xbbd/0xc55 drivers/media/usb/siano/smsusb.c:567 ... This patch adds check before cancel_work_sync(). If surb->wq has not been initialized, the cancel_work_sync() will not be executed. Reported-by: syzbot+27b0b464864741b18b99@syzkaller.appspotmail.com Fixes: ebad8e731c1c ("media: usb: siano: Fix use after free bugs caused by do_submit_urb") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23media: usb: Check az6007_read() return valueDaniil Dulov
[ Upstream commit fdaca63186f59fc664b346c45b76576624b48e57 ] If az6007_read() returns error, there is no sence to continue. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 3af2f4f15a61 ("[media] az6007: Change the az6007 read/write routine parameter") Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: uvcvideo: Don't expose unsupported formats to userspaceLaurent Pinchart
[ Upstream commit 81f3affa19d6ab0c32aef46b053838219eef7e71 ] When the uvcvideo driver encounters a format descriptor with an unknown format GUID, it creates a corresponding struct uvc_format instance with the fcc field set to 0. Since commit 50459f103edf ("media: uvcvideo: Remove format descriptions"), the driver relies on the V4L2 core to provide the format description string, which the V4L2 core can't do without a valid 4CC. This triggers a WARN_ON. As a format with a zero 4CC can't be selected, it is unusable for applications. Ignore the format completely without creating a uvc_format instance, which fixes the warning. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217252 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2180107 Fixes: 50459f103edf ("media: uvcvideo: Remove format descriptions") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()Hyunwoo Kim
[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ] Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(), which is called when the device is disconnected, dvb_frontend_free() is not finally called. This causes a memory leak just by repeatedly plugging and unplugging the device. Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb(). Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_addressWei Chen
[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ] In su3000_read_mac_address, if i2c_transfer fails to execute two messages, array mac address will not be initialized. Without handling such error, later in function dvb_usb_adapter_dvb_init, proposed_mac is accessed before initialization. Fix this error by returning a negative value if message execution fails. Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()Wei Chen
[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ] In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach digitv_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xferZhang Shurong
[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ] In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()Wei Chen
[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ] In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()Wei Chen
[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ] In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. If accessing msg[i].buf[0] without sanity check, null pointer deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()Wei Chen
[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ] In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null, commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99. However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0. We add check on msg[i].len to prevent null-ptr-deref. Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24media: Prefer designated initializers over memset for subdev pad opsLaurent Pinchart
[ Upstream commit e3a69496a1cde364c74a600d7a370179b58aed29 ] Structures passed to subdev pad operations are all zero-initialized, but not always with the same kind of code constructs. While most drivers used designated initializers, which zero all the fields that are not specified, when declaring variables, some use memset(). Those two methods lead to the same end result, and, depending on compiler optimizations, may even be completely equivalent, but they're not consistent. Improve coding style consistency by using designated initializers instead of calling memset(). Where applicable, also move the variables to inner scopes of for loops to ensure correct initialization in all iterations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11media: uvcvideo: Fix race condition with usb_kill_urbRicardo Ribalda
commit 619d9b710cf06f7a00a17120ca92333684ac45a8 upstream. usb_kill_urb warranties that all the handlers are finished when it returns, but does not protect against threads that might be handling asynchronously the urb. For UVC, the function uvc_ctrl_status_event_async() takes care of control changes asynchronously. If the code is executed in the following order: CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_ctrl_status_event_work() uvc_status_start() -> FAIL Then uvc_status_start will keep failing and this error will be shown: <4>[ 5.540139] URB 0000000000000000 submitted while active drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528 Let's improve the current situation, by not re-submiting the urb if we are stopping the status event. Also process the queued work (if any) during stop. CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_status_start() uvc_ctrl_status_event_work() -> FAIL Hopefully, with the usb layer protection this should be enough to cover all the cases. Cc: stable@vger.kernel.org Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Reviewed-by: Yunke Cao <yunkec@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11media: uvcvideo: Silence memcpy() run-time false positive warningsKees Cook
[ Upstream commit b839212988575c701aab4d3d9ca15e44c87e383c ] The memcpy() in uvc_video_decode_meta() intentionally copies across the length and flags members and into the trailing buf flexible array. Split the copy so that the compiler can better reason about (the lack of) buffer overflows here. Avoid the run-time false positive warning: memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1) Additionally fix a typo in the documentation for struct uvc_meta_buf. Reported-by: ionut_n2001@yahoo.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910Ricardo Ribalda
[ Upstream commit 136effa754b57632f99574fc4a3433e0cfc031d9 ] Logitech B910 and C910 firmware are unable to recover from a USB autosuspend. When it resumes, the device is in a state where it only produces invalid frames. Eg: $ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log $ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1 [350438.435219] uvcvideo: uvc_v4l2_open [350438.529794] uvcvideo: Resuming interface 2 [350438.529801] uvcvideo: Resuming interface 3 [350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080. [350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps). [350438.551496] uvcvideo: uvc_v4l2_mmap [350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth. [350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth). [350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each. [350439.316468] uvcvideo: Marking buffer as bad (error bit set). [350439.316475] uvcvideo: Frame complete (EOF found). [350439.316477] uvcvideo: EOF in empty payload. [350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249 [350439.384510] uvcvideo: Marking buffer as bad (error bit set). [350439.384516] uvcvideo: Frame complete (EOF found). [350439.384518] uvcvideo: EOF in empty payload. [350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316 [350439.448472] uvcvideo: Marking buffer as bad (error bit set). [350439.448478] uvcvideo: Frame complete (EOF found). [350439.448480] uvcvideo: EOF in empty payload. [350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382 ...(loop)... The devices can leave this invalid state if the alternate setting of the streaming interface is toggled. This patch adds a quirk for this device so it can be autosuspended properly. lsusb -v: Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x0821 HD Webcam C910 bcdDevice 0.10 iManufacturer 0 iProduct 0 iSerial 1 390022B0 bNumConfigurations 1 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11media: uvcvideo: Handle errors from calls to usb_stringGuenter Roeck
[ Upstream commit 4867bb590ae445bcfaa711a86b603c97e94574b3 ] On a Webcam from Quanta, we see the following error. usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03 usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 3-5: Product: USB2.0 HD UVC WebCam usb 3-5: Manufacturer: Quanta usb 3-5: SerialNumber: 0x0001 ... uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2) uvcvideo: Failed to initialize entity for entity 5 uvcvideo: Failed to register entities (-22). The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a string index of '7' associated with that entity. The attempt to read that string from the camera fails with error -32 (-EPIPE). usb_string() returns that error, but it is ignored. As result, the entity name is empty. This later causes v4l2_device_register_subdev() to return -EINVAL, and no entities are registered as result. While this appears to be a firmware problem with the camera, the kernel should still handle the situation gracefully. To do that, check the return value from usb_string(). If it reports an error, assign the entity's default name. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11media: uvcvideo: Handle cameras with invalid descriptorsRicardo Ribalda
[ Upstream commit 41ddb251c68ac75c101d3a50a68c4629c9055e4c ] If the source entity does not contain any pads, do not create a link. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11media: uvcvideo: Remove format descriptionsLaurent Pinchart
[ Upstream commit 50459f103edfe47c9a599d766a850ef6014936c5 ] The V4L2 core overwrites format descriptions in v4l_fill_fmtdesc(), there's no need to manually set the descriptions in the driver. This prepares for removal of the format descriptions from the uvc_fmts table. Unlike V4L2, UVC makes a distinction between the SD-DV, SDL-DV and HD-DV formats. It also indicates whether the DV format uses 50Hz or 60Hz. This information is parsed by the driver to construct a format name string that is printed in a debug message, but serves no other purpose as V4L2 has a single V4L2_PIX_FMT_DV pixel format that covers all those cases. As the information is available in the UVC descriptors, and thus accessible to users with lsusb if they really care, don't log it in a debug message and drop the format name string to simplify the code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: Fix memory leak of object map on error exit pathColin Ian King
commit 4b065060555b14c7a9b86c013a1c9bee8e8b6fbd upstream. Currently when the allocation of map->name fails the error exit path does not kfree the previously allocated object map. Fix this by setting ret to -ENOMEM and taking the free_map exit error path to ensure map is kfree'd. Addresses-Coverity: ("Resource leak") Fixes: 70fa906d6fce ("media: uvcvideo: Use control names from framework") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10media: usb: siano: Fix use after free bugs caused by do_submit_urbDuoming Zhou
[ Upstream commit ebad8e731c1c06adf04621d6fd327b860c0861b5 ] There are UAF bugs caused by do_submit_urb(). One of the KASan reports is shown below: [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890 [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49 [ 36.408316] [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8 [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.416157] Workqueue: 0x0 (events) [ 36.417654] Call Trace: [ 36.418546] <TASK> [ 36.419320] dump_stack_lvl+0x96/0xd0 [ 36.420522] print_address_description+0x75/0x350 [ 36.421992] print_report+0x11b/0x250 [ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0 [ 36.424806] ? __virt_addr_valid+0xcf/0x170 [ 36.426069] ? worker_thread+0x4a2/0x890 [ 36.427355] kasan_report+0x131/0x160 [ 36.428556] ? worker_thread+0x4a2/0x890 [ 36.430053] worker_thread+0x4a2/0x890 [ 36.431297] ? worker_clr_flags+0x90/0x90 [ 36.432479] kthread+0x166/0x190 [ 36.433493] ? kthread_blkcg+0x50/0x50 [ 36.434669] ret_from_fork+0x22/0x30 [ 36.435923] </TASK> [ 36.436684] [ 36.437215] Allocated by task 24: [ 36.438289] kasan_set_track+0x50/0x80 [ 36.439436] __kasan_kmalloc+0x89/0xa0 [ 36.440566] smsusb_probe+0x374/0xc90 [ 36.441920] usb_probe_interface+0x2d1/0x4c0 [ 36.443253] really_probe+0x1d5/0x580 [ 36.444539] __driver_probe_device+0xe3/0x130 [ 36.446085] driver_probe_device+0x49/0x220 [ 36.447423] __device_attach_driver+0x19e/0x1b0 [ 36.448931] bus_for_each_drv+0xcb/0x110 [ 36.450217] __device_attach+0x132/0x1f0 [ 36.451470] bus_probe_device+0x59/0xf0 [ 36.452563] device_add+0x4ec/0x7b0 [ 36.453830] usb_set_configuration+0xc63/0xe10 [ 36.455230] usb_generic_driver_probe+0x3b/0x80 [ 36.456166] printk: console [ttyGS0] disabled [ 36.456569] usb_probe_device+0x90/0x110 [ 36.459523] really_probe+0x1d5/0x580 [ 36.461027] __driver_probe_device+0xe3/0x130 [ 36.462465] driver_probe_device+0x49/0x220 [ 36.463847] __device_attach_driver+0x19e/0x1b0 [ 36.465229] bus_for_each_drv+0xcb/0x110 [ 36.466466] __device_attach+0x132/0x1f0 [ 36.467799] bus_probe_device+0x59/0xf0 [ 36.469010] device_add+0x4ec/0x7b0 [ 36.470125] usb_new_device+0x863/0xa00 [ 36.471374] hub_event+0x18c7/0x2220 [ 36.472746] process_one_work+0x34c/0x5b0 [ 36.474041] worker_thread+0x4b7/0x890 [ 36.475216] kthread+0x166/0x190 [ 36.476267] ret_from_fork+0x22/0x30 [ 36.477447] [ 36.478160] Freed by task 24: [ 36.479239] kasan_set_track+0x50/0x80 [ 36.480512] kasan_save_free_info+0x2b/0x40 [ 36.481808] ____kasan_slab_free+0x122/0x1a0 [ 36.483173] __kmem_cache_free+0xc4/0x200 [ 36.484563] smsusb_term_device+0xcd/0xf0 [ 36.485896] smsusb_probe+0xc85/0xc90 [ 36.486976] usb_probe_interface+0x2d1/0x4c0 [ 36.488303] really_probe+0x1d5/0x580 [ 36.489498] __driver_probe_device+0xe3/0x130 [ 36.491140] driver_probe_device+0x49/0x220 [ 36.492475] __device_attach_driver+0x19e/0x1b0 [ 36.493988] bus_for_each_drv+0xcb/0x110 [ 36.495171] __device_attach+0x132/0x1f0 [ 36.496617] bus_probe_device+0x59/0xf0 [ 36.497875] device_add+0x4ec/0x7b0 [ 36.498972] usb_set_configuration+0xc63/0xe10 [ 36.500264] usb_generic_driver_probe+0x3b/0x80 [ 36.501740] usb_probe_device+0x90/0x110 [ 36.503084] really_probe+0x1d5/0x580 [ 36.504241] __driver_probe_device+0xe3/0x130 [ 36.505548] driver_probe_device+0x49/0x220 [ 36.506766] __device_attach_driver+0x19e/0x1b0 [ 36.508368] bus_for_each_drv+0xcb/0x110 [ 36.509646] __device_attach+0x132/0x1f0 [ 36.510911] bus_probe_device+0x59/0xf0 [ 36.512103] device_add+0x4ec/0x7b0 [ 36.513215] usb_new_device+0x863/0xa00 [ 36.514736] hub_event+0x18c7/0x2220 [ 36.516130] process_one_work+0x34c/0x5b0 [ 36.517396] worker_thread+0x4b7/0x890 [ 36.518591] kthread+0x166/0x190 [ 36.519599] ret_from_fork+0x22/0x30 [ 36.520851] [ 36.521405] Last potentially related work creation: [ 36.523143] kasan_save_stack+0x3f/0x60 [ 36.524275] kasan_record_aux_stack_noalloc+0x9d/0xb0 [ 36.525831] insert_work+0x25/0x130 [ 36.527039] __queue_work+0x4d4/0x620 [ 36.528236] queue_work_on+0x72/0xb0 [ 36.529344] __usb_hcd_giveback_urb+0x13f/0x1b0 [ 36.530819] dummy_timer+0x350/0x1a40 [ 36.532149] call_timer_fn+0x2c/0x190 [ 36.533567] expire_timers+0x69/0x1f0 [ 36.534736] __run_timers+0x289/0x2d0 [ 36.535841] run_timer_softirq+0x2d/0x60 [ 36.537110] __do_softirq+0x116/0x380 [ 36.538377] [ 36.538950] Second to last potentially related work creation: [ 36.540855] kasan_save_stack+0x3f/0x60 [ 36.542084] kasan_record_aux_stack_noalloc+0x9d/0xb0 [ 36.543592] insert_work+0x25/0x130 [ 36.544891] __queue_work+0x4d4/0x620 [ 36.546168] queue_work_on+0x72/0xb0 [ 36.547328] __usb_hcd_giveback_urb+0x13f/0x1b0 [ 36.548805] dummy_timer+0x350/0x1a40 [ 36.550116] call_timer_fn+0x2c/0x190 [ 36.551570] expire_timers+0x69/0x1f0 [ 36.552762] __run_timers+0x289/0x2d0 [ 36.553916] run_timer_softirq+0x2d/0x60 [ 36.555118] __do_softirq+0x116/0x380 [ 36.556239] [ 36.556807] The buggy address belongs to the object at ffff888005960000 [ 36.556807] which belongs to the cache kmalloc-4k of size 4096 [ 36.560652] The buggy address is located 232 bytes inside of [ 36.560652] 4096-byte region [ffff888005960000, ffff888005961000) [ 36.564791] [ 36.565355] The buggy address belongs to the physical page: [ 36.567212] page:000000004f0a0731 refcount:1 mapcount:0 mapping:0000000000000000 index:0x00 [ 36.570534] head:000000004f0a0731 order:3 compound_mapcount:0 subpages_mapcount:0 compound0 [ 36.573717] flags: 0x100000000010200(slab|head|node=0|zone=1) [ 36.575481] raw: 0100000000010200 ffff888001042140 dead000000000122 0000000000000000 [ 36.577842] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 [ 36.580175] page dumped because: kasan: bad access detected [ 36.581994] [ 36.582548] Memory state around the buggy address: [ 36.583983] ffff88800595ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 36.586240] ffff888005960000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.588884] >ffff888005960080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.591071] ^ [ 36.593295] ffff888005960100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.595705] ffff888005960180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 36.598026] ================================================================== [ 36.600224] Disabling lock debugging due to kernel taint [ 36.602681] general protection fault, probably for non-canonical address 0x43600a000000060I [ 36.607129] CPU: 0 PID: 49 Comm: kworker/0:2 Tainted: G B 6.2.0-rc3-15798-8 [ 36.611115] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.615026] Workqueue: events do_submit_urb [ 36.616290] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0 [ 36.618107] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5 [ 36.623522] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046 [ 36.625072] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7 [ 36.627206] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0 [ 36.629813] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f [ 36.631974] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020 [ 36.634285] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001 [ 36.636438] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 [ 36.639092] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.640951] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0 [ 36.643411] Call Trace: [ 36.644215] <TASK> [ 36.644902] smscore_getbuffer+0x3e/0x1e0 [ 36.646147] do_submit_urb+0x4f/0x190 [ 36.647449] process_one_work+0x34c/0x5b0 [ 36.648777] worker_thread+0x4b7/0x890 [ 36.649984] ? worker_clr_flags+0x90/0x90 [ 36.651166] kthread+0x166/0x190 [ 36.652151] ? kthread_blkcg+0x50/0x50 [ 36.653547] ret_from_fork+0x22/0x30 [ 36.655051] </TASK> [ 36.655733] Modules linked in: [ 36.656787] ---[ end trace 0000000000000000 ]--- [ 36.658328] RIP: 0010:_raw_spin_lock_irqsave+0x8a/0xd0 [ 36.660045] Code: 24 00 00 00 00 48 89 df be 04 00 00 00 e8 9e b5 c6 fe 48 89 ef be 04 00 5 [ 36.665730] RSP: 0018:ffff888004b6fcf0 EFLAGS: 00010046 [ 36.667448] RAX: 0000000000000000 RBX: 043600a000000060 RCX: ffffffff9fc0e0d7 [ 36.669675] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff888004b6fcf0 [ 36.672645] RBP: ffff888004b6fcf0 R08: dffffc0000000000 R09: ffffed100096df9f [ 36.674921] R10: dfffe9100096dfa0 R11: 1ffff1100096df9e R12: ffff888005960020 [ 36.677034] R13: ffff8880059600f0 R14: 0000000000000246 R15: 0000000000000001 [ 36.679184] FS: 0000000000000000(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 [ 36.681655] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.683383] CR2: 00007f07476819a3 CR3: 0000000004a34000 CR4: 00000000000006f0 [ 36.685733] Kernel panic - not syncing: Fatal exception [ 36.688585] Kernel Offset: 0x1d400000 from 0xffffffff81000000 (relocation range: 0xfffffff) [ 36.692199] ---[ end Kernel panic - not syncing: Fatal exception ]--- When the siano device is plugged in, it may call the following functions to initialize the device. smsusb_probe()-->smsusb_init_device()-->smscore_start_device(). When smscore_start_device() gets failed, the function smsusb_term_device() will be called and smsusb_device_t will be deallocated. Although we use usb_kill_urb() in smsusb_stop_streaming() to cancel transfer requests and wait for them to finish, the worker threads that are scheduled by smsusb_onresponse() may be still running. As a result, the UAF bugs could happen. We add cancel_work_sync() in smsusb_stop_streaming() in order that the worker threads could finish before the smsusb_device_t is deallocated. Fixes: dd47fbd40e6e ("[media] smsusb: don't sleep while atomic") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()Hans Verkuil
[ Upstream commit 9f582f0418ed1c18f92c9e4628075d6ec9a7d9fb ] Check for inactive controls in uvc_ctrl_is_accessible(). Use the new value for the master_id controls if present, otherwise use the existing value to determine if it is OK to set the control. Doing this here avoids attempting to set an inactive control, which will return an error from the USB device, which returns an invalid errorcode. This fixes: warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO   warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO test VIDIOC_G/S_CTRL: OK   warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO   warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO   warn: v4l2-test-controls.cpp(816): s_ext_ctrls returned EIO test VIDIOC_G/S/TRY_EXT_CTRLS: OK Tested with: v4l2-ctl -c auto_exposure=1 OK v4l2-ctl -c exposure_time_absolute=251 OK v4l2-ctl -c auto_exposure=3 OK v4l2-ctl -c exposure_time_absolute=251 VIDIOC_S_EXT_CTRLS: failed: Input/output error exposure_time_absolute: Input/output error ERROR v4l2-ctl -c auto_exposure=3,exposure_time_absolute=251,auto_exposure=1 v4l2-ctl -C auto_exposure,exposure_time_absolute   auto_exposure: 1 exposure_time_absolute: 251 Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: Check controls flags before accessing themRicardo Ribalda
[ Upstream commit ee929d5a10ca433a1c21b9aaeb70a67c5507c101 ] We can figure out if reading/writing a set of controls can fail without accessing them by checking their flags. This way we can honor the API closer: If an error is found when validating the list of controls passed with VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to indicate to userspace that no actual hardware was touched. Fixes v4l2-compliance: Control ioctls (Input 0): warn: v4l2-test-controls.cpp(765): g_ext_ctrls(0) invalid error_idx 0 fail: v4l2-test-controls.cpp(645): invalid error index write only control test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: Use control names from frameworkRicardo Ribalda
[ Upstream commit 70fa906d6fceb07a49198d2f31cadecc76787419 ] The framework already contains a map of IDs to names, lets use it when possible. Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Suggested-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: Add support for V4L2_CTRL_TYPE_CTRL_CLASSRicardo Ribalda
[ Upstream commit 9b31ea808a4468d5d606d1f82c58b7e7bfb99f66 ] Create all the class controls for the device defined controls. Fixes v4l2-compliance: Control ioctls (Input 0): fail: v4l2-test-controls.cpp(216): missing control class for class 00980000 fail: v4l2-test-controls.cpp(216): missing control tclass for class 009a0000 test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: refactor __uvc_ctrl_add_mappingRicardo Ribalda
[ Upstream commit 866c6bdd5663d4df7cf384b381b6ef8ba9ffd0e4 ] Pass the chain instead of the device. We want to keep the reference to the chain that controls belong to. We need to delay the initialization of the controls after the chains have been initialized. This is a cleanup needed for the next patches. Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: Remove s_ctrl and g_ctrlRicardo Ribalda
[ Upstream commit 0c6bcbdfefa83b8a1e9659b3c127758dce0fe7ac ] If we do not implement these callbacks the framework will call the ext_ctrl callbaks instead, which are a superset of this functions. Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10media: uvcvideo: Do not check for V4L2_CTRL_WHICH_DEF_VALRicardo Ribalda
[ Upstream commit a2f8a484fbc96b8209a760cb3f2c95ca49c2cdb1 ] The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is written. Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31media: dvb-usb: fix memory leak in dvb_usb_adapter_init()Mazin Al Haddad
[ Upstream commit 94d90fb06b94a90c176270d38861bcba34ce377d ] Syzbot reports a memory leak in "dvb_usb_adapter_init()". The leak is due to not accounting for and freeing current iteration's adapter->priv in case of an error. Currently if an error occurs, it will exit before incrementing "num_adapters_initalized", which is used as a reference counter to free all adap->priv in "dvb_usb_adapter_exit()". There are multiple error paths that can exit from before incrementing the counter. Including the error handling paths for "dvb_usb_adapter_stream_init()", "dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()" within "dvb_usb_adapter_init()". This means that in case of an error in any of these functions the current iteration is not accounted for and the current iteration's adap->priv is not freed. Fix this by freeing the current iteration's adap->priv in the "stream_init_err:" label in the error path. The rest of the (accounted for) adap->priv objects are freed in dvb_usb_adapter_exit() as expected using the num_adapters_initalized variable. Syzbot report: BUG: memory leak unreferenced object 0xffff8881172f1a00 (size 512): comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline] [<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline] [<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308 [<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883 [<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline] [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621 [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline] [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752 [<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782 [<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899 [<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970 [<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405 [<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170 [<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline] [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621 [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline] [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752 Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()Baisong Zhong
[ Upstream commit 0ed554fd769a19ea8464bb83e9ac201002ef74ad ] Wei Chen reports a kernel bug as blew: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] ... Call Trace: <TASK> __i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109 i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170 i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297 i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd834a8bded In az6027_i2c_xfer(), if msg[i].addr is 0x99, a null-ptr-deref will caused when accessing msg[i].buf. For msg[i].len is 0 and msg[i].buf is null. Fix this by checking msg[i].len in az6027_i2c_xfer(). Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/ Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver") Reported-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26media: uvcvideo: Use entity get_cur in uvc_ctrl_setYunke Cao
[ Upstream commit 5f36851c36b30f713f588ed2b60aa7b4512e2c76 ] Entity controls should get_cur using an entity-defined function instead of via a query. Fix this in uvc_ctrl_set. Fixes: 65900c581d01 ("media: uvcvideo: Allow entity-defined get_info and get_cur") Signed-off-by: Yunke Cao <yunkec@google.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26media: uvcvideo: Fix memory leak in uvc_gpio_parseJosé Expósito
[ Upstream commit f0f078457f18f10696888f8d0e6aba9deb9cde92 ] Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 ("Resource leak") Fixes: 2886477ff987 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28media: flexcop-usb: fix endpoint type checkJohan Hovold
commit 763679f0eeff0185fc431498849bbc1c24460875 upstream. Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") tried to add an endpoint type sanity check for the single isochronous endpoint but instead broke the driver by checking the wrong descriptor or random data beyond the last endpoint descriptor. Make sure to check the right endpoint descriptor. Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") Cc: Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org # 5.9 Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151027.27026-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05media: pvrusb2: fix memory leak in pvr_probeDongliang Mu
commit 945a9a8e448b65bec055d37eba58f711b39f66f0 upstream. The error handling code in pvr2_hdw_create forgets to unregister the v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create, it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL, which leads to that pvr2_hdw_destroy directly returns. Fix this by adding v4l2_device_unregister to decrease the refcount of usb interface. Reported-by: syzbot+77b432d57c4791183ed4@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-17media: hdpvr: fix error value returns in hdpvr_readNiels Dossche
[ Upstream commit 359c27c6ddbde404f44a9c0d3ec88ccd1e2042f2 ] Error return values are supposed to be negative in hdpvr_read. Most error returns are currently handled via an unsigned integer "ret". When setting a negative error value to "ret", the value actually becomes a large positive value, because "ret" is unsigned. Later on, the "ret" value is returned. But as ssize_t is a 64-bit signed number, the error return value stays a large positive integer instead of a negative integer. This can cause an error value to be interpreted as the read size, which can cause a buffer overread for applications relying on the returned size. Fixes: 9aba42efe85b ("V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_initPavel Skripkin
[ Upstream commit 471bec68457aaf981add77b4f590d65dd7da1059 ] Syzbot reported that -1 is used as array index. The problem was in missing validation check. hdw->unit_number is initialized with -1 and then if init table walk fails this value remains unchanged. Since code blindly uses this member for array indexing adding sanity check is the easiest fix for that. hdw->workpoll initialization moved upper to prevent warning in __flush_work. Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09media: uvcvideo: Fix missing check to determine if element is found in listXiaomeng Tong
[ Upstream commit 261f33388c29f6f3c12a724e6d89172b7f6d5996 ] The list iterator will point to a bogus position containing HEAD if the list is empty or the element is not found in list. This case should be checked before any use of the iterator, otherwise it will lead to a invalid memory access. The missing check here is before "pin = iterm->id;", just add check here to fix the security bug. In addition, the list iterator value will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the element is not found in list, considering the (mis)use here: "if (iterm == NULL". Use a new value 'it' as the list iterator, while use the old value 'iterm' as a dedicated pointer to point to the found element, which 1. can fix this bug, due to 'iterm' is NULL only if it's not found. 2. do not need to change all the uses of 'iterm' after the loop. 3. can also limit the scope of the list iterator 'it' *only inside* the traversal loop by simply declaring 'it' inside the loop in the future, as usage of the iterator outside of the list_for_each_entry is considered harmful. https://lkml.org/lkml/2022/2/17/1032 Fixes: d5e90b7a6cd1c ("[media] uvcvideo: Move to video_ioctl2") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08media: hdpvr: initialize dev->worker at hdpvr_register_videodevDongliang Mu
[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ] hdpvr_register_videodev is responsible to initialize a worker in hdpvr_device. However, the worker is only initialized at hdpvr_start_streaming other than hdpvr_register_videodev. When hdpvr_probe does not initialize its worker, the hdpvr_disconnect will encounter one WARN in flush_work.The stack trace is as follows: hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458 __device_release_driver drivers/base/dd.c:1206 [inline] device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237 bus_remove_device+0x108/0x160 drivers/base/bus.c:529 device_del+0x1fe/0x510 drivers/base/core.c:3592 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228 Fix this by moving the initialization of dev->worker to the starting of hdpvr_register_videodev Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08media: Revert "media: em28xx: add missing em28xx_close_extension"Pavel Skripkin
[ Upstream commit fde18c3bac3f964d8333ae53b304d8fee430502b ] This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938. Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian reported [1]. Since quick solution didn't come up let's just revert it to make this device work with upstream kernels. Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ [1] Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-06 02:37:52 +0000