Age | Commit message (Collapse) | Author |
|
This is the 5.15.33 stable release
Files which conflict can cause problem in future:
drivers/clk/imx/clk-imx8qxp-lpcg.c
reverted:
4b8a71f206c94445317179b79d7f91996f40dcfc clk: imx: off by one in imx_lpcg_parse_clks_from_dt()
drivers/mailbox/imx-mailbox.c
e8d90d8901e42f9ac039086af9f1829030204fa8 MLK-25649-4 mailbox: imx: Add support for identifying SCU wakeup source from sysfs
security/keys/trusted-keys/trusted_core.c
ae82e852ca1b899e936c02859c18a80467901b2f KEYS: trusted: allow use of TEE as backend without TCG_TPM support
Signed-off-by: Daiane Angolini <daiane.angolini@foundries.io>
|
|
There is a hardware bug that it will load
the first 128 bytes of configuration data twice,
it will led to some configure error.
so shift the configuration data 128 bytes,
and make the first 128 bytes all zero,
then hardware will load the 128 zero twice,
and ignore them as garbage.
then the configuration data can be loaded correctly
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
if don't soft reset the codec for each frame,
there may be two problems:
1. the decoder may hang
2. the decoded picture may be incorrect
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
[ 8.048049][ T223] Unexpected kernel BRK exception at E1
[ 8.051385][ T223] Internal error: BRK handler: f2000001 [#1]PREEMPT SMP
[ 8.287484][ T223] Call trace:
[ 8.290630][ T223] ov5640_probe+0x854/0x858 [ov5640_camera_mipi_v2]
[ 8.297077][ T223] i2c_device_probe+0x200/0x280
[ 8.301785][ T223] really_probe+0x1c0/0x4a8
[ 8.306143][ T223] driver_probe_device+0x68/0xc0
[ 8.310935][ T223] device_driver_attach+0x70/0xb4
[ 8.315814][ T223] __driver_attach+0xc8/0x150
[ 8.320346][ T223] bus_for_each_dev+0x84/0xd4
[ 8.324878][ T223] driver_attach+0x28/0x38
[ 8.329149][ T223] bus_add_driver+0x108/0x1e8
[ 8.333681][ T223] driver_register+0x7c/0x118
[ 8.338214][ T223] i2c_register_driver+0x48/0xa4
[ 8.343010][ T223] init_module+0x24/0xfe8 [ov5640_camera_mipi_v2]
[ 8.349280][ T223] do_one_initcall+0xec/0x318
[ 8.353814][ T223] do_init_module+0x60/0x3a0
[ 8.358262][ T223] load_module+0x2ad0/0x3248
[ 8.362708][ T223] __arm64_sys_finit_module+0xbc/0xfc
[ 8.367935][ T223] el0_svc_common+0xa4/0x180
[ 8.372380][ T223] do_el0_svc+0x28/0x7c
[ 8.376392][ T223] el0_svc+0x14/0x24
[ 8.380142][ T223] el0_sync_handler+0x6c/0xb4
[ 8.384673][ T223] el0_sync+0x19c/0x1c0
UBSAN is a runtime undefined behaviour checker.
Array ov5640_mode_info_data[2][5], and the value of mode and orig_mode
may be 0xff, so there is an undefined access problem.
Change-Id: I9e3487fa2fe2543e37018c494a159345b5ab991e
Signed-off-by: zhipeng.wang <zhipeng.wang_1@nxp.com>
(cherry picked from commit 5040dffc9e38255f8bedc9483e58989b6077fc2a)
|
|
Wait finishing jpeg job before system sleep,
otherwise the encoding/decoding can't be resumed after suspend.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
implement V4L2_CID_JPEG_COMPRESSION_QUALITY
to set jpeg quality
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
change MXC_JPEG_RGB to MXC_JPEG_BGR
fix some comments of bgr description
Signed-off-by: Ming Qian <ming.qian@nxp.com>
|
|
the arrangement of rgb format used by this jpeg codec
should be B,G,R, or B,G,R,A,
so the pixelformat should be V4L2_PIX_FMT_BGR24 and
V4L2_PIX_FMT_ABGR32
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
Fix Coverity Issue: 21141306 Out-of-bounds read
overrun-local: Overrunning array ov5640_mode_info_data[frame_rate] of at element index 255
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Reviewed-by: Alice Yuan <alice.yuan@nxp.com>
|
|
To support dynamic resolution change,
driver should meet the following conditions:
1. the previous pictures are all decoded before source change event.
2. prevent decoding new resolution pictures with incorrect capture
buffer, until user handle source change event and setup capture.
3. report correct fmt and resolution during source change.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
Refine code to support dynamic resolution change
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
The GStreamer v4l2videodec only ever calls S_FMT on the output side
and then expects G_FMT on the capture side to return a valid format.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
The decoder will save the precision that was detected from jpeg header
and use it later, when choosing the pixel format and also calculate
bytesperline according to precision.
The 12bit jpeg is not supported yet,
but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg.
And the 12bit jpeg is supported by hardware, driver may support it later.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
Refine code to support dynamic resolution change
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
Don't change the output buffer's bytesused set by user.
Drop allow_zero_bytesused, since it's deprecated.
This should also guarantee it's the application's responsibility
to set bytesused for the output buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
The V4L2_EVENT_EOS event is a deprecated behavior,
the V4L2_BUF_FLAG_LAST buffer flag should be used instead.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
When error occurs in parsing jpeg, the slot isn't acquired yet, it may
be the default value MXC_MAX_SLOTS.
If the driver access the slot using the incorrect slot number, it will
access array out of bounds.
The result is the driver will change num_domains, which follows
slot_data in struct mxc_jpeg_dev.
Then the driver won't detach the pm domain at rmmod, which will lead to
kernel panic when trying to insmod again.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
|
|
[ Upstream commit 97558d170a1236280407e8d29a7d095d2c2ed554 ]
When error occurs in parsing jpeg, the slot isn't acquired yet, it may
be the default value MXC_MAX_SLOTS.
If the driver access the slot using the incorrect slot number, it will
access array out of bounds.
The result is the driver will change num_domains, which follows
slot_data in struct mxc_jpeg_dev.
Then the driver won't detach the pm domain at rmmod, which will lead to
kernel panic when trying to insmod again.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 417591a766b3c040c346044541ff949c0b2bb7b2 ]
If the application queues an NV12M jpeg as output buffer, but then
queues a single planar capture buffer, the kernel will crash with
"Unable to handle kernel NULL pointer dereference" in mxc_jpeg_addrs,
prevent this by finishing the job with error.
Signed-off-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72802a86e11c34e819fbfb38f58c5aef668f833d ]
The ISC supports a full broad range of frame sizes.
Until now, the subdevice was queried for possible frame sizes and these
were reported to the user space.
However, the ISC should not care about which frame sizes the subdev
supports, as long as this frame size is supported.
Thus, report a continuous range from smallest frame size up to the max
resolution.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
cal_ctx_v4l2_init_formats()
[ Upstream commit abd77889851d2ead0d0c9c4d29f1808801477b00 ]
In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to
ctx->active_fmt and there is a dereference of it after that, which could
lead to NULL pointer dereference on failure of devm_kzalloc().
Fix this bug by adding a NULL check of ctx->active_fmt.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings, and our static
analyzer no longer warns about this code.
Fixes: 7168155002cf ("media: ti-vpe: cal: Move format handling to cal.c and expose helpers")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79e8c421a099bfbcebe59740153e55aa0442ced6 ]
The CLIP, SRC & DST registers are coded to take the pixel/line start & end,
starting from 0. Thus the end should be the width/height minus 1.
It can be an issue with clipping and rotation, where it will add spurious
lines from uninitialized or unwanted data with a shift in the result.
Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b732a0016853eaff35944f900b0db66f3914374 ]
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca85d271531a1e1c86f24b892f57b7d0a3ddb5a6 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b52ce99e9f2dcda868a1a7026bfb58d04bd6bc8 ]
The ispck is not used for sama7g5 variant of the ISC.
Calls to ispck have to be removed also from module insert/removal.
Fixes: d7f26849ed7c ("media: atmel: fix the ispck initialization")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e25a89f743b18c029bfbe5e1663ae0c7190912b0 ]
The return value of devm_kzalloc() needs to be checked.
To avoid use of null pointer in case of thefailure of alloc.
Fixes: 46233e91fa24 ("media: mtk-vcodec: move firmware implementations into their own files")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ce8c48b06f249a9739e36c5d56883f6f49ce047 ]
This function waits for halt_complete but doesn't do anything to cause
it to complete, and always hits the "VFE halt timeout" error. Just delete
this code for now.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee780cd7be3b5608550bafe7d5f113db2140e99b ]
Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which
is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which
is set when disabling.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6da362491e409de0978d733441e59db6584d69f ]
csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14d510e040f85ff05734fd6db8bae44b47886464 ]
Use the decode_format/data_type from the "format" struct instead of a
hardcoded 10-bit format.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d42b3ad105b5d3481f6a56bc789aa2b27aa09325 upstream.
Make sure to disable runtime PM before returning on probe errors.
Fixes: 479f7a118105 ("[media] davinci: vpif: adaptions for DT support")
Cc: stable@vger.kernel.org
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4a321de239213300a714fa0353a5f1272d381a44 upstream.
Make sure to balance the runtime PM usage counter on driver unbind.
Fixes: 407ccc65bfd2 ("[media] davinci: vpif: add pm_runtime support")
Cc: stable@vger.kernel.org # 3.9
Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61b3317dd424a3488b6754d7ff8301944d9d17d7 upstream.
During encoder driver open controls are initialized via a call
to v4l2_ctrl_handler_setup which returns EINVAL error for
V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM v4l2 control. The control
default value is disabled and because of firmware limitations
8x8 transform cannot be disabled for the supported HIGH and
CONSTRAINED_HIGH profiles.
To fix the issue change the control default value to enabled
(this is fine because the firmware enables 8x8 transform for
high and constrained_high profiles by default). Also, correct
the checking of profile ids in s_ctrl from hfi to v4l2 ids.
cc: stable@vger.kernel.org # 5.15+
Fixes: bfee75f73c37 ("media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22beb839f48d841ec75974872863dc253d37c21c upstream.
The HFI_PROPERTY_PARAM_VENC_HDR10_PQ_SEI HFI property is not supported
on Venus v1 and v3.
cc: stable@vger.kernel.org # 5.13+
Fixes: 9172652d72f8 ("media: venus: venc: Add support for CLL and Mastering display controls")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 5.15.27 stable release
* tag 'v5.15.27': (3069 commits)
Linux 5.15.27
hamradio: fix macro redefine warning
KVM: x86/mmu: Passing up the error state of mmu_alloc_shadow_roots()
...
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Conflicts:
arch/arm/boot/dts/imx7ulp.dtsi
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
arch/arm64/boot/dts/freescale/imx8mq.dtsi
drivers/dma-buf/heaps/cma_heap.c
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
drivers/gpu/drm/mxsfb/mxsfb_kms.c
drivers/mmc/host/sdhci-esdhc-imx.c
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
drivers/rpmsg/rpmsg_char.c
drivers/soc/imx/gpcv2.c
drivers/thermal/imx_thermal.c
|
|
If the application queues an NV12M jpeg as output buffer, but then
queues a single planar capture buffer, the kernel will crash with
"Unable to handle kernel NULL pointer dereference" in mxc_jpeg_addrs,
prevent this by finishing the job with error.
Signed-off-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4L2_PIX_FMT_NV12 requires num_planes equals to 1,
V4L2_PIX_FMT_NV12M requires num_planes equals to 2.
and mxc-jpeg supports 2 planes for nv12,
so we should use 4L2_PIX_FMT_NV12M instead of V4L2_PIX_FMT_NV12,
otherwise it will confuses gstreamer and prevent encoding and decoding.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
commit 549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream.
PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c2611e479f5d9b05108270e1ab423955486b4457 ]
While testing Rockchip RK3399 with both ISPs enabled, a dmesg error
was observed:
```
[ 15.559141] debugfs: Directory 'rkisp1' with parent '/' already present!
```
Fix it by using the device name for the debugfs subdirectory name
instead of the driver name, thus preventing name collision.
Link: https://lore.kernel.org/linux-media/20211010175457.438627-1-mike.rudenko@gmail.com
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da6911f330d40cfe115a37249e47643eff555e82 ]
This change fixes two issues with the size constraints for buffers.
- There is no width alignment constraint for RGB formats. Prior to this
change they were treated as YUV and as a result were more restricted
than needed. Add a new check to differentiate between the two.
- The minimum width and height supported is 5x2, not 2x4, this is an
artifact from the driver's soc-camera days. Fix this incorrect
assumption.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
concurrent video sessions
[ Upstream commit 91f2b7d269e5c885c38c7ffa261f5276bd42f907 ]
In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.
Crash logs:
[ 1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[ 1.908493] Modules linked in:
[ 1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[ 1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[ 1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[ 1.934608] pc : opp_debug_remove_one+0x2c/0x48
[ 1.939080] lr : opp_debug_remove_one+0x2c/0x48
[ 1.943560] sp : ffffffc011d7b7f0
[ 1.946836] pmr_save: 000000e0
[ 1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc
[ 1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00
[ 1.960355] x25: 0000000000000001 x24: 0000000000000000
[ 1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900
[ 1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800
[ 1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10
[ 1.981352] x17: ffffff80837a5620 x16: 00000000000000ec
[ 1.986601] x15: ffffffc010519ad4 x14: 0000000000000003
[ 1.991849] x13: 0000000000000004 x12: 0000000000000001
[ 1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff
[ 2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00
[ 2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00
[ 2.012845] x5 : 0000000000190004 x4 : 0000000000000000
[ 2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480
[ 2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017
[ 2.028594] Call trace:
[ 2.031022] opp_debug_remove_one+0x2c/0x48
[ 2.035160] dev_pm_opp_put+0x94/0xb0
[ 2.038780] _opp_remove_all+0x7c/0xc8
[ 2.042486] _opp_remove_all_static+0x54/0x7c
[ 2.046796] dev_pm_opp_remove_table+0x74/0x98
[ 2.051183] devm_pm_opp_of_table_release+0x18/0x24
[ 2.056001] devm_action_release+0x1c/0x28
[ 2.060053] release_nodes+0x23c/0x2b8
[ 2.063760] devres_release_group+0xcc/0xd0
[ 2.067900] component_bind+0xac/0x168
[ 2.071608] component_bind_all+0x98/0x124
[ 2.075664] msm_drm_bind+0x1e8/0x678
[ 2.079287] try_to_bring_up_master+0x60/0x134
[ 2.083674] component_master_add_with_match+0xd8/0x120
[ 2.088834] msm_pdev_probe+0x20c/0x2a0
[ 2.092629] platform_drv_probe+0x9c/0xbc
[ 2.096598] really_probe+0x11c/0x46c
[ 2.100217] driver_probe_device+0x8c/0xf0
[ 2.104270] device_driver_attach+0x54/0x78
[ 2.108407] __driver_attach+0x48/0x148
[ 2.112201] bus_for_each_dev+0x88/0xd4
[ 2.115998] driver_attach+0x2c/0x38
[ 2.119534] bus_add_driver+0x10c/0x200
[ 2.123330] driver_register+0x6c/0x104
[ 2.127122] __platform_driver_register+0x4c/0x58
[ 2.131767] msm_drm_register+0x6c/0x70
[ 2.135560] do_one_initcall+0x64/0x23c
[ 2.139357] do_initcall_level+0xac/0x15c
[ 2.143321] do_initcalls+0x5c/0x9c
[ 2.146778] do_basic_setup+0x2c/0x38
[ 2.150401] kernel_init_freeable+0xf8/0x15c
[ 2.154622] kernel_init+0x1c/0x11c
[ 2.158079] ret_from_fork+0x10/0x30
[ 2.161615] ---[ end trace a2cc45a0f784b212 ]---
[ 2.166272] Removing OPP: 300000000
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43f0633f89947df57fe0b5025bdd741768007708 ]
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Link: https://lore.kernel.org/linux-media/20211206022201.1639460-1-jiasheng@iscas.ac.cn
Fixes: b0444f18e0b1 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
'venus_probe()'
[ Upstream commit 8cc7a1b2aca067397a016cdb971a5e6ad9b640c7 ]
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4bb ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
handling path
[ Upstream commit e4debea9be7d5db52bc6a565a4c02c3c6560d093 ]
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb57879 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1f9bb8020783a48151e3a2864fbdc70548566dd ]
In exististing implimentation, in min_loaded_core() for low_power
vpp frequency value is considering as vpp_freq instead of low_power_freq.
Fixed this by correcting vpp frequency calculation for encoder.
Fixes: 3cfe5815ce0e (media: venus: Enable low power setting for encoder)
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a59cd88f55068710f6549bee548846661673780 ]
Stop the CODA960 JPEG encoder from overflowing capture buffers.
The bitstream buffer overflow interrupt doesn't seem to be connected,
so this has to be handled via timeout instead.
Reported-by: Martin Weber <martin.weber@br-automation.com>
Fixes: 96f6f62c4656 ("media: coda: jpeg: add CODA960 JPEG encoder support")
Tested-by: Martin Weber <martin.weber@br-automation.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f89c881bffbdffe4060ffaef3489a2830a6dd9c ]
The func v4l2_m2m_ctx_release waits for currently running jobs
to finish and then stop streaming both queues and frees the buffers.
All this should be done before the call to mtk_vcodec_enc_release
which frees the encoder handler. This fixes null-pointer dereference bug:
[ 638.028076] Mem abort info:
[ 638.030932] ESR = 0x96000004
[ 638.033978] EC = 0x25: DABT (current EL), IL = 32 bits
[ 638.039293] SET = 0, FnV = 0
[ 638.042338] EA = 0, S1PTW = 0
[ 638.045474] FSC = 0x04: level 0 translation fault
[ 638.050349] Data abort info:
[ 638.053224] ISV = 0, ISS = 0x00000004
[ 638.057055] CM = 0, WnR = 0
[ 638.060018] user pgtable: 4k pages, 48-bit VAs, pgdp=000000012b6db000
[ 638.066485] [00000000000001a0] pgd=0000000000000000, p4d=0000000000000000
[ 638.073277] Internal error: Oops: 96000004 [#1] SMP
[ 638.078145] Modules linked in: rfkill mtk_vcodec_dec mtk_vcodec_enc uvcvideo mtk_mdp mtk_vcodec_common videobuf2_dma_contig v4l2_h264 cdc_ether v4l2_mem2mem videobuf2_vmalloc usbnet videobuf2_memops videobuf2_v4l2 r8152 videobuf2_common videodev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf elan_i2c elants_i2c sbs_battery mc cros_usbpd_charger cros_ec_chardev cros_usbpd_logger crct10dif_ce mtk_vpu fuse ip_tables x_tables ipv6
[ 638.118583] CPU: 0 PID: 212 Comm: kworker/u8:5 Not tainted 5.15.0-06427-g58a1d4dcfc74-dirty #109
[ 638.127357] Hardware name: Google Elm (DT)
[ 638.131444] Workqueue: mtk-vcodec-enc mtk_venc_worker [mtk_vcodec_enc]
[ 638.137974] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 638.144925] pc : vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.150493] lr : venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.156060] sp : ffff8000124d3c40
[ 638.159364] x29: ffff8000124d3c40 x28: 0000000000000000 x27: 0000000000000000
[ 638.166493] x26: 0000000000000000 x25: ffff0000e7f252d0 x24: ffff8000124d3d58
[ 638.173621] x23: ffff8000124d3d58 x22: ffff8000124d3d60 x21: 0000000000000001
[ 638.180750] x20: ffff80001137e000 x19: 0000000000000000 x18: 0000000000000001
[ 638.187878] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000
[ 638.195006] x14: ffff8000118536c0 x13: ffff8000ee1da000 x12: 0000000030d4d91d
[ 638.202134] x11: 0000000000000000 x10: 0000000000000980 x9 : ffff8000124d3b20
[ 638.209262] x8 : ffff0000c18d4ea0 x7 : ffff0000c18d44c0 x6 : ffff0000c18d44c0
[ 638.216391] x5 : ffff80000904a3b0 x4 : ffff8000124d3d58 x3 : ffff8000124d3d60
[ 638.223519] x2 : ffff8000124d3d78 x1 : 0000000000000001 x0 : ffff80001137efb8
[ 638.230648] Call trace:
[ 638.233084] vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.238304] venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.243525] mtk_venc_worker+0x110/0x250 [mtk_vcodec_enc]
[ 638.248918] process_one_work+0x1f8/0x498
[ 638.252923] worker_thread+0x140/0x538
[ 638.256664] kthread+0x148/0x158
[ 638.259884] ret_from_fork+0x10/0x20
[ 638.263455] Code: f90023f9 2a0103f5 aa0303f6 aa0403f8 (f940d277)
[ 638.269538] ---[ end trace e374fc10f8e181f5 ]---
[gst-master] root@debian:~/gst-build# [ 638.019193] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a0
Fixes: 4e855a6efa547 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed2f97ad4b21072f849cf4ae6645d1f2b1d3f550 ]
After devm_request_threaded_irq() is called there is a chance that an
interrupt may occur before the spinlock is initialized, which will trigger
a kernel oops.
To prevent that, move the initialization of the spinlock prior to
requesting the interrupts.
Fixes: 51abcf7fdb70 ("media: imx-pxp: add i.MX Pixel Pipeline driver")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cee44d4fbacbbdfe62697ec94e76c6e4f726c5df ]
hsfreqrange should be chosen based on the calculated mbps which
is closer to the default bit rate and within the range as per
table[1]. But current calculation always selects first value which
is greater than or equal to the calculated mbps which may lead
to chosing a wrong range in some cases.
For example for 360 mbps for H3/M3N
Existing logic selects
Calculated value 360Mbps : Default 400Mbps Range [368.125 -433.125 mbps]
This hsfreqrange is out of range.
The logic is changed to get the default value which is closest to the
calculated value [1]
Calculated value 360Mbps : Default 350Mbps Range [320.625 -380.625 mpbs]
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]
Please note that According to Renesas in Table 25.9 the range for
220 default value is corrected as below
|Range (Mbps) | Default Bit rate (Mbps) |
-----------------------------------------------
| 197.125-244.125 | 220 |
-----------------------------------------------
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Kazuyoshi Akiyama <akiyama@nds-osk.co.jp>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af6d1bde395cac174ee71adcd3fa43f6435c7206 ]
If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
v4l2_input_status won't be updated to no-signal immediately until
aspeed_video_get_resolution() in aspeed_video_resolution_work().
During the period of time, aspeed_video_start_frame() could be called
because it doesn't know signal becomes unstable now. If it goes with
aspeed_video_init_regs() of aspeed_video_irq_res_change()
simultaneously, it will mess up hw state.
To fix this problem, v4l2_input_status is updated to no-signal
immediately for VE_INTERRUPT_MODE_DETECT_WD irq.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|