summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)Author
2015-10-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This update contains: - Fix for a long standing race affecting /proc/irq/NNN - One line fix for ARM GICV3-ITS counting the wrong data - Warning silencing in ARM GICV3-ITS. Another GCC trying to be overly clever issue" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Count additional LPIs for the aliased devices irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined genirq: Fix race in register_irq_proc()
2015-10-02irqchip/gic-v3-its: Count additional LPIs for the aliased devicesMarc Zyngier
When configuring the interrupt mapping for a new device, we iterate over all the possible aliases to account for their maximum MSI allocation. This was introduced by e8137f4f5088 ("irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration"). Turns out that the code doing that is a bit braindead, and repeatedly accounts for the same device over and over. Fix this by counting the actual alias that is passed to us by the core code. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Alex Shi <alex.shi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlinedMarc Zyngier
More agressive inlining in recent versions of GCC have uncovered a new set of warnings: drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare: drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.lpi_base = lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here int lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.nr_lpis = nr_lpis; ^ drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here int nr_lpis; ^ The warning is fairly benign (there is no code path that could actually use uninitialized variables), but let's silence it anyway by zeroing the variables on the error path. Reported-by: Alex Shi <alex.shi@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: - Properly setup irq handling for ATH79 platforms - Fix bootmem mapstart calculation for contiguous maps - Handle little endian and older CPUs correct in BPF - Fix console for Fulong 2E systems - Handle FTLB correctly on R6 CPUs - Fixes for CM, GIC and MAAR support code * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Initialise MAARs on secondary CPUs MIPS: print MAAR configuration during boot MIPS: mm: compile maar_init unconditionally irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC. irqchip: mips-gic: Convert CPU numbers to VP IDs. MIPS: CM: Provide a function to map from CPU to VP ID. MIPS: Fix FTLB detection for R6 MIPS: cpu-features: Add cpu_has_ftlb MIPS: ATH79: Add irq chip ar7240-misc-intc MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip MIPS: BPF: Fix build on pre-R2 little endian CPUs MIPS: BPF: Avoid unreachable code on little endian MIPS: bootmem: Fix mapstart calculation for contiguous maps MIPS: Fix console output for Fulong2e system
2015-09-27irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC.Paul Burton
gic_handle_shared_int reads the GIC interrupt pending & mask registers directly into a bitmap, which is defined as an array of unsigned longs. The GIC pending registers may be 32 bits wide if the CM is older than CM3, regardless of the bit width of the CPU, but for MIPS64 kernels the unsigned longs in the bitmap will be 64 bits wide. In this case we need to perform 2 x 32 bit reads per 64 bit unsigned long in order to avoid missing interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11213/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-27irqchip: mips-gic: Convert CPU numbers to VP IDs.Paul Burton
Make use of the mips_cm_vp_id function to convert from Linux CPU numbers to the VP IDs used by hardware, which are not identical in all systems. Without doing so we map interrupts to incorrect VP(E)s. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11212/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-22irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()Ludovic Desroches
When masking/unmasking interrupts, mask_cache is updated and used later for suspend/resume. Unfortunately, it always was the mask_cache associated with the first irq chip which was updated. So when performing resume, only irqs 0-31 could be enabled. Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <sasha.levin@oracle.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <nicolas.ferre@atmel.com> Cc: <alexandre.belloni@free-electrons.com> Cc: <boris.brezillon@free-electrons.com> Cc: <Wenyou.Yang@atmel.com> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org #3.18 Link: http://lkml.kernel.org/r/1442843173-2390-1-git-send-email-ludovic.desroches@atmel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16irqchip: Kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Link: http://lkml.kernel.org/r/1440889285-5637-3-git-send-email-robh@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flagThomas Gleixner
Get rid of the handler_data abuse. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flagThomas Gleixner
Get rid of the handler_data abuse. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-15irqchip/renesas-irqc: Propagate wake-up settings to parentGeert Uytterhoeven
The renesas-irqc interrupt controller is cascaded to the GIC, but its driver doesn't propagate wake-up settings to the parent interrupt controller. Since commit aec89ef72ba6c944 ("irqchip/gic: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND"), the GIC driver masks interrupts during suspend, and wake-up through gpio-keys now fails on r8a73a4/ape6evm. Fix this by propagating wake-up settings to the parent interrupt controller. There's no need to handle irq_set_irq_wake() failures, as the renesas-irqc interrupt controller is always cascaded to a GIC, and the GIC driver always sets SKIP_SET_WAKE since the aforementioned commit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1441731636-17610-3-git-send-email-geert%2Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/renesas-intc-irqpin: Propagate wake-up settings to parentGeert Uytterhoeven
The renesas-intc-irqpin interrupt controller is cascaded to the GIC, but its driver doesn't propagate wake-up settings to the parent interrupt controller. Since commit aec89ef72ba6c944 ("irqchip/gic: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND"), the GIC driver masks interrupts during suspend, and wake-up through gpio-keys now fails on r8a7740/armadillo and sh73a0/kzm9g. Fix this by propagating wake-up settings to the parent interrupt controller. There's no need to handle irq_set_irq_wake() failures, as the renesas-intc-irqpin interrupt controller is always cascaded to a GIC, and the GIC driver always sets SKIP_SET_WAKE since the aforementioned commit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1441731636-17610-2-git-send-email-geert%2Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/renesas-intc-irqpin: Use a separate lockdep classGeert Uytterhoeven
The renesas-intc-irqpin interrupt controller is cascaded to the GIC. Hence when propagating wake-up settings to its parent interrupt controller, the following lockdep warning is printed: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-armadillo-10725-g50fcd7643c034198 #781 Not tainted --------------------------------------------- s2ram/1179 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by s2ram/1179: #0: (sb_writers#7){.+.+.+}, at: [<c00c9708>] __sb_start_write+0x64/0xb8 #1: (&of->mutex){+.+.+.}, at: [<c0125a00>] kernfs_fop_write+0x78/0x1a0 #2: (s_active#23){.+.+.+}, at: [<c0125a08>] kernfs_fop_write+0x80/0x1a0 #3: (autosleep_lock){+.+.+.}, at: [<c0058244>] pm_autosleep_lock+0x18/0x20 #4: (pm_mutex){+.+.+.}, at: [<c0057e50>] pm_suspend+0x54/0x248 #5: (&dev->mutex){......}, at: [<c0243a20>] __device_suspend+0xdc/0x240 #6: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 stack backtrace: CPU: 0 PID: 1179 Comm: s2ram Not tainted 4.2.0-armadillo-10725-g50fcd7643c034198 Hardware name: Generic R8A7740 (Flattened Device Tree) [<c00129f4>] (dump_backtrace) from [<c0012bec>] (show_stack+0x18/0x1c) [<c0012bd4>] (show_stack) from [<c03f5d94>] (dump_stack+0x20/0x28) [<c03f5d74>] (dump_stack) from [<c00514d4>] (__lock_acquire+0x67c/0x1b88) [<c0050e58>] (__lock_acquire) from [<c0052df8>] (lock_acquire+0x9c/0xbc) [<c0052d5c>] (lock_acquire) from [<c03fb068>] (_raw_spin_lock_irqsave+0x44/0x58) [<c03fb024>] (_raw_spin_lock_irqsave) from [<c005bb54>] (__irq_get_desc_lock+0x78/0x94 [<c005badc>] (__irq_get_desc_lock) from [<c005c3d8>] (irq_set_irq_wake+0x28/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c01e50d0>] (intc_irqpin_irq_set_wake+0x24/0x4c) [<c01e50ac>] (intc_irqpin_irq_set_wake) from [<c005c17c>] (set_irq_wake_real+0x3c/0x50 [<c005c140>] (set_irq_wake_real) from [<c005c414>] (irq_set_irq_wake+0x64/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c02a19b4>] (gpio_keys_suspend+0x60/0xa0) [<c02a1954>] (gpio_keys_suspend) from [<c023b750>] (platform_pm_suspend+0x3c/0x5c) Avoid this false positive by using a separate lockdep class for INTC External IRQ Pin interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1441798974-25716-3-git-send-email-geert%2Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/renesas-irqc: Use a separate lockdep classGeert Uytterhoeven
The renesas-irqc interrupt controller is cascaded to the GIC. Hence when propagating wake-up settings to its parent interrupt controller, the following lockdep warning is printed: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-ape6evm-10725-g50fcd7643c034198 #280 Not tainted --------------------------------------------- s2ram/1072 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by s2ram/1072: #0: (sb_writers#7){.+.+.+}, at: [<c012eb14>] __sb_start_write+0xa0/0xa8 #1: (&of->mutex){+.+.+.}, at: [<c019396c>] kernfs_fop_write+0x4c/0x1bc #2: (s_active#24){.+.+.+}, at: [<c0193974>] kernfs_fop_write+0x54/0x1bc #3: (pm_mutex){+.+.+.}, at: [<c008213c>] pm_suspend+0x10c/0x510 #4: (&dev->mutex){......}, at: [<c02af3c4>] __device_suspend+0xdc/0x2cc #5: (&irq_desc_lock_class){-.-...}, at: [<c008d3fc>] __irq_get_desc_lock+0x58/0x98 stack backtrace: CPU: 0 PID: 1072 Comm: s2ram Not tainted 4.2.0-ape6evm-10725-g50fcd7643c034198 #280 Hardware name: Generic R8A73A4 (Flattened Device Tree) [<c0018078>] (unwind_backtrace) from [<c00144f0>] (show_stack+0x10/0x14) [<c00144f0>] (show_stack) from [<c0451f14>] (dump_stack+0x88/0x98) [<c0451f14>] (dump_stack) from [<c007b29c>] (__lock_acquire+0x15cc/0x20e4) [<c007b29c>] (__lock_acquire) from [<c007c6e0>] (lock_acquire+0xac/0x12c) [<c007c6e0>] (lock_acquire) from [<c0457c00>] (_raw_spin_lock_irqsave+0x40/0x54) [<c0457c00>] (_raw_spin_lock_irqsave) from [<c008d3fc>] (__irq_get_desc_lock+0x58/0x98) [<c008d3fc>] (__irq_get_desc_lock) from [<c008ebbc>] (irq_set_irq_wake+0x20/0xf8) [<c008ebbc>] (irq_set_irq_wake) from [<c0260770>] (irqc_irq_set_wake+0x20/0x4c) [<c0260770>] (irqc_irq_set_wake) from [<c008ec28>] (irq_set_irq_wake+0x8c/0xf8) [<c008ec28>] (irq_set_irq_wake) from [<c02cb8c0>] (gpio_keys_suspend+0x74/0xc0) [<c02cb8c0>] (gpio_keys_suspend) from [<c02ae8cc>] (dpm_run_callback+0x54/0x124) Avoid this false positive by using a separate lockdep class for IRQC interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1441798974-25716-2-git-send-email-geert%2Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/GICv2m: Fix GICv2m build warning on 32 bitsPavel Fedin
After GICv2m was enabled for 32-bit ARM kernel, a warning popped up: drivers/irqchip/irq-gic-v2m.c: In function gicv2m_compose_msi_msg: drivers/irqchip/irq-gic-v2m.c:100:2: warning: right shift count >= width of type [enabled by default] msg->address_hi = (u32) (addr >> 32); ^ This patch fixes it by using proper macros for splitting up the value. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Stuart Yoder <stuart.yoder@freescale.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442142873-20213-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/gic-v3-its: Add missing cache flushesMarc Zyngier
When the ITS is configured for non-cacheable transactions, make sure that the allocated, zeroed memory is flushed to the Point of Coherency, allowing the ITS to observe the zeros instead of random garbage (or even get its own data overwritten by zeros being evicted from the cache...). Fixes: 241a386c7dbb "irqchip: gicv3-its: Use non-cacheable accesses when no shareability" Reported-and-tested-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Pavel Fedin <p.fedin@samsung.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442142873-20213-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/GIC: Add workaround for aliased GIC400Marc Zyngier
The GICv2 architecture mandates that the two 4kB GIC regions are contiguous, and on two separate physical pages (so that access to the second page can be trapped by a hypervisor). This doesn't work very well when PAGE_SIZE is 64kB. A relatively common hack^Wway to work around this is to alias each 4kB region over its own 64kB page. Of course in this case, the base address you want to use is not really the begining of the region, but base + 60kB (so that you get a contiguous 8kB region over two distinct pages). Normally, this would be described in DT with a new property, but some HW is already out there, and the firmware makes sure that it will override whatever you put in the GIC node. Duh. And of course, said firmware source code is not available, despite being based on u-boot. The workaround is to detect the case where the CPU interface size is set to 128kB, and verify the aliasing by checking that the ID register for GIC400 (which is the only GIC wired this way so far) is the same at base and base + 0xF000. In this case, we update the GIC base address and let it roll. And if you feel slightly sick by looking at this, rest assured that I do too... Reported-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Stuart Yoder <stuart.yoder@freescale.com> Cc: Pavel Fedin <p.fedin@samsung.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442142873-20213-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-08Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irq updates from Thomas Gleixner: "The second part of irq related updates: - Provide EOImode for GIC[V3] irq chips, which is a prerequisite for direct interrupt handling in [KVM] guests" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/GIC: Fix EOImode setting for non-DT/ACPI systems irqchip/GIC: Don't deactivate interrupts forwarded to a guest irqchip/GIC: Convert to EOImode == 1 irqchip/GICv3: Don't deactivate interrupts forwarded to a guest irqchip/GICv3: Convert to EOImode == 1
2015-09-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-09-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A large cleanup branch this release, with a healthy 10k negative line delta. Most of this is removal of legacy (non-DT) support of shmobile platforms. There is also removal of two non-DT platforms on OMAP, and the plat-samsung directory is cleaned out by moving most of the previously shared-location-but-not-actually-shared files from there to the appropriate mach directories instead. There are other sets of changes in here as well: - Rob Herring removed use of set_irq_flags under all platforms and moved to genirq alternatives - a series of timer API conversions to set-state interface - ep93xx, nomadik and ux500 cleanups from Linus Walleij - __init annotation fixes from Nicolas Pitre + a bunch of other changes that all add up to a nice set of cleanups" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits) ARM/fb: ep93xx: switch framebuffer to use modedb only ARM: gemini: Setup timer3 as free running timer ARM: gemini: Use timer1 for clockevent ARM: gemini: Add missing register definitions for gemini timer ARM: ep93xx/timer: Migrate to new 'set-state' interface ARM: nomadik: push accelerometer down to boards ARM: nomadik: move l2x0 setup to device tree ARM: nomadik: selectively enable UART0 on boards ARM: nomadik: move hog code to use DT hogs ARM: shmobile: Fix mismerges ARM: ux500: simplify secondary CPU boot ARM: SAMSUNG: remove keypad-core header in plat-samsung ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx ARM: SAMSUNG: local onenand-core header in mach-s3c64xx ARM: SAMSUNG: local irq-uart header in mach-s3c64xx ARM: SAMSUNG: local backlight header in mach-s3c64xx ARM: SAMSUNG: local ata-core header in mach-s3c64xx ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx ARM: SAMSUNG: local spi-core header in mach-s3c24xx ARM: SAMSUNG: local nand-core header in mach-s3c24xx ...
2015-09-01irqchip/GIC: Fix EOImode setting for non-DT/ACPI systemsMarc Zyngier
Non-DT/ACPI systems call directly into the GIC driver at init time. Turns out 0b996fd35957 ("irqchip/GIC: Convert to EOImode == 1") breaks old non firmware-driven platforms, as the driver only works out the capability of the platform on the DT/ACPI paths. Fix this thinko by forcing EOImode==0 on non-DT platforms, which are not capable of supporting a hypervisor anyway. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1441098533-31523-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-27irqchip/GIC: Don't deactivate interrupts forwarded to a guestMarc Zyngier
Commit 0a4377de3056 ("genirq: Introduce irq_set_vcpu_affinity() to target an interrupt to a VCPU") added just what we needed at the lowest level to allow an interrupt to be deactivated by a guest. When such a request reaches the GIC, it knows it doesn't need to perform the deactivation anymore, and can safely leave the guest do its magic. This of course requires additional support in both VFIO and KVM. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Eric Auger <eric.auger@linaro.org> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: kvmarm@lists.cs.columbia.edu Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440604845-28229-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-27irqchip/GIC: Convert to EOImode == 1Marc Zyngier
So far, GICv2 has been used with EOImode == 0. The effect of this mode is to perform the priority drop and the deactivation of the interrupt at the same time. While this works perfectly for Linux (we only have a single priority), it causes issues when an interrupt is forwarded to a guest, and when we want the guest to perform the EOI itself. For this case, the GIC architecture provides EOImode == 1, where: - A write to the EOI register drops the priority of the interrupt and leaves it active. Other interrupts at the same priority level can now be taken, but the active interrupt cannot be taken again - A write to the DIR marks the interrupt as inactive, meaning it can now be taken again. We only enable this feature when booted in HYP mode and that the device-tree reported a suitable CPU interface. Observable behaviour should remain unchanged. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Eric Auger <eric.auger@linaro.org> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: kvmarm@lists.cs.columbia.edu Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440604845-28229-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-27irqchip/GICv3: Don't deactivate interrupts forwarded to a guestMarc Zyngier
Commit 0a4377de3056 ("genirq: Introduce irq_set_vcpu_affinity() to target an interrupt to a VCPU") added just what we needed at the lowest level to allow an interrupt to be deactivated by a guest. When such a request reaches the GIC, it knows it doesn't need to perform the deactivation anymore, and can safely leave the guest do its magic. This of course requires additional support in both VFIO and KVM. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Eric Auger <eric.auger@linaro.org> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: kvmarm@lists.cs.columbia.edu Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440604845-28229-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-27irqchip/GICv3: Convert to EOImode == 1Marc Zyngier
So far, GICv3 has been used in with EOImode == 0. The effect of this mode is to perform the priority drop and the deactivation of the interrupt at the same time. While this works perfectly for Linux (we only have a single priority), it causes issues when an interrupt is forwarded to a guest, and when we want the guest to perform the EOI itself. For this case, the GIC architecture provides EOImode == 1, where: - A write to ICC_EOIR1_EL1 drops the priority of the interrupt and leaves it active. Other interrupts at the same priority level can now be taken, but the active interrupt cannot be taken again - A write to ICC_DIR_EL1 marks the interrupt as inactive, meaning it can now be taken again. This patch converts the driver to be able to use this new mode, depending on whether or not the kernel can behave as a hypervisor. No feature change. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Eric Auger <eric.auger@linaro.org> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: kvmarm@lists.cs.columbia.edu Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440604845-28229-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-26IRQCHIP: irq-mips-gic: Add support for CM3 64-bit timer irqsMarkos Chandras
CM3 uses a 64-bit counter and compare registers so add support for them in the GIC counter interrupt. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10648/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26IRQCHIP: irq-mips-gic: Extend GIC accessors for 64-bit CMsMarkos Chandras
Previously, the GIC accessors were only accessing u32 registers but newer CMs may actually be 64-bit on MIPS64 cores. As a result of which, extended these accessors to support 64-bit reads and writes. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-24irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sourcesShenwei Wang
IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions: power management and wakeup source management. When the system is in WFI (wait for interrupt) mode, the GPC block will be the first block on the platform to be activated and signaled. In normal wait mode during cpu idle, the system can be woken up by any enabled interrupts. In standby or suspend mode, the system can only be wokem up by the pre-defined wakeup sources. Based-on-patch-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <shawn.guo@linaro.org> Cc: <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440443055-7291-1-git-send-email-shenwei.wang@freescale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2Eric Anholt
This interrupt controller is the new root interrupt controller with the timer, PMU events, and IPIs, and the bcm2835's interrupt controller is chained off of it to handle the peripherals. I wrote the interrupt chip support, while Andrea Merello wrote the IPI code. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-rpi-kernel@lists.infradead.org Cc: Lee Jones <lee@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1438902033-31477-5-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20irqchip/bcm2835: Add support for being used as a second level controllerEric Anholt
The BCM2836 (Raspberry Pi 2) uses two levels of interrupt handling with the CPU-local interrupts being the root, so we need to register ours as chained off of the CPU's local interrupt. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-rpi-kernel@lists.infradead.org Cc: Lee Jones <lee@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1438902033-31477-3-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQEric Anholt
For BCM2836, we want to chain into this IRQ chip from the root controller, and for chaining we need to do something else instead of handle_IRQ() once we have decoded the IRQ. Note that this changes the behavior a little bit: Previously for a non-shortcut IRQ, we'd loop reading and handling the second level IRQ status until it was cleared before returning to the loop reading the top level IRQ status (Note that the top level bit is just an OR of the low level bits). For the expected case of just one interrupt to be handled, this was an extra register read, so we're down from 4 to 3 reads. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-rpi-kernel@lists.infradead.org Cc: Lee Jones <lee@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1438902033-31477-2-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20irqchip/crossbar: Restore set_wake functionalityGrygorii Strashko
The TI crossbar irqchip doesn't provides any facility to configure the wakeup sources, but the conversion to hierarchical irqdomains set the irq_set_wake callback to irq_chip_set_wake_parent. The parent chip (OMAP wakeupgen) has no irq_set_wake function either so the call will fail with -ENOSYS. As a result the irq_set_wake() call in the resume path will trigger an 'Unbalanced wake disable' warning. Before the conversion the GIC irqchip was the top level irqchip and correctly flagged with IRQCHIP_SKIP_SET_WAKE. Restore the correct behaviour by removing the irq_set_type callback from the crossbar irqchip and set the IRQCHIP_SKIP_SET_WAKE flag which lets the irq_set_irq_wake() call from the driver succeed. [ tglx: Massaged changelog ] Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-7-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20irqchip/crossbar: Restore the mask on suspend behaviourGrygorii Strashko
The ARM GIC requires that all interrupts which are not used as a wakeup source have to be masked during suspend. The conversion of the crossbar irqchip to hierarchical irq domains failed to mark the crossbar irqchip with the IRQCHIP_MASK_ON_SUSPEND flag and therefor broke the suspend requirement of the GIC. Before the conversion the flags were visible because the GIC was the top level irqchip. After the conversion the crossbar irqchip is the top level irq chip whose flags are evaluated in suspend_device_irq(). As the flag is not set the masking of the non-wakeup irqs is not invoked which breaks suspend. Add the IRQCHIP_MASK_ON_SUSPEND flag to the crossbar irqchip, so the GIC interrupts get masked properly. [ tglx: Massaged changelog ] Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-6-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20irqchip/crossbar: Restore the irq_set_type() mechanismGrygorii Strashko
The conversion of the crossbar irqchip to hierarchical irq domains failed to provide a mechanism to properly set the trigger type of an interrupt. The crossbar irq chip itself has no mechanism and therefor no irq_set_type() callback. The code before the conversion relayed the trigger configuration directly to the underlying GIC. Restore the correct behaviour by setting the crossbar irq_set_type callback to irq_chip_set_type_parent(). This propagates the set_trigger() call to the underlying GIC irqchip. [ tglx: Massaged changelog ] Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-4-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-04irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instanceJon Hunter
Commit 3228950621d9 ("irqchip: gic: Preserve gic V2 bypass bits in cpu ctrl register") added a new function, gic_cpu_if_up(), to program the GIC CPU_CTRL register. This function assumes that there is only one GIC instance present and hence always uses the chip data for the primary GIC controller. Although it is not common for there to be a secondary, some devices do support a secondary. Therefore, fix this by passing gic_cpu_if_up() a pointer to the appropriate chip data structure. Similarly, the function gic_cpu_if_down() only assumes that there is a single GIC instance present. Update this function so that an instance number is passed for the appropriate GIC and return an error code on failure. The vexpress TC2 (which has a single GIC) is currently the only user of this function and so update it accordingly. Note that because the TC2 only has a single GIC, the call to gic_cpu_if_down() should always be successful. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438332252-25248-2-git-send-email-jonathanh@nvidia.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-04irqchip/gic: Only allow the primary GIC to set the CPU mapJon Hunter
The gic_init_bases() function initialises an array that stores the mapping between the GIC and CPUs. This array is a global array that is unconditionally initialised on every call to gic_init_bases(). Although, it is not common for there to be more than one GIC instance, there are some devices that do support nested GIC controllers and gic_init_bases() can be called more than once. A 2nd call to gic_init_bases() will clear the previous CPU mapping and will only setup the mapping again for the CPU calling gic_init_bases(). Fix this by only allowing the CPU map to be configured for the primary GIC. For secondary GICs the CPU map is not relevant because these GICs do not directly route the interrupts to the main CPU(s) but to other GICs or devices. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438332252-25248-1-git-send-email-jonathanh@nvidia.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-03MIPS: SMP: Don't increment irq_count multiple times for call function IPIsAlex Smith
The majority of SMP platforms handle their IPIs through do_IRQ() which calls irq_{enter/exit}(). When a call function IPI is received, smp_call_function_interrupt() is called which also calls irq_{enter,exit}(), meaning irq_count is raised twice. When tick broadcasting is used (which is implemented via a call function IPI), this incorrectly causes all CPU idle time on the core receiving broadcast ticks to be accounted as time spent servicing IRQs, as account_process_tick() will account as such if irq_count is greater than 1. This results in 100% CPU usage being reported on a core which receives its ticks via broadcast. This patch removes the SMP smp_call_function_interrupt() wrapper which calls irq_{enter,exit}(). Platforms which handle their IPIs through do_IRQ() now call generic_smp_call_function_interrupt() directly to avoid incrementing irq_count a second time. Platforms which don't (loongson, sgi-ip27, sibyte) call generic_smp_call_function_interrupt() wrapped in irq_{enter,exit}(). Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10770/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-31irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removalThomas Gleixner
Make irq a local variable and retrieve domain from the irq descriptor which avoid a redundant lookup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org>
2015-07-31MIPS/irqchip: Move i8259 irqchip driver to drivers/irqchipRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-31irqchip: Remove header drivers/irqchip/irqchip.hJoel Porquet
All drivers using the macro IRQCHIP_DECLARE have been converted to using global header include/linux/irqchip.h. Local header drivers/irqchip/irqchip.h is now useless and can be removed. Signed-off-by: Joel Porquet <joel@porquet.org> Cc: vgupta@synopsys.com Cc: monstr@monstr.eu Cc: ralf@linux-mips.org Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/2818400.nekF4hg2Ig@joel-zenbook Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/GICv2m: Add platform MSI supportMarc Zyngier
In order to support non-PCI MSI with GICv2m, add the minimal required entry points for the MSI domain, which is actually almost nothing (we just use the defaults provided by the core code). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-18-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/GICv2m: Get rid of struct msi_controllerMarc Zyngier
GICv2m only uses the msi_controller structure as a way to match the host bridge with its MSI HW, and thus the msi_domain. But now that we can directly associate an msi_domain with a device, there is no use keeping this msi_controller around. Just remove all traces of msi_controller from the driver. Also tag the inner (non-PCI) domain with DOMAIN_BUS_NEXUS. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-17-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/gicv3-its: Add platform MSI supportMarc Zyngier
In order to support non-PCI MSI with the GICv3 ITS, add the minimal required entry points for the MSI domain (an msi_prepare implementation). The rest is only boilerplate code to find the raw ITS domain. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-16-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/gicv3-its: Make the PCI/MSI code standaloneMarc Zyngier
We can now lookup the base ITS domain, making it possible to initialize the PCI/MSI code independently from the main ITS subsystem. This allows us to remove all the previously add hooks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-15-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/gicv3-its: Get rid of struct msi_controllerMarc Zyngier
The GICv3 ITS only uses the msi_controller structure as a way to match the host bridge with its MSI HW, and thus the msi_domain. But now that we can directly associate an msi_domain with a device, there is no use keeping this msi_controller around. Just remove all traces of msi_controller from the driver. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-14-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/gicv3-its: Register irq domain with NEXUS tokenMarc Zyngier
Now that we can distinguish between multiple domains carrying the same device_node, tag the raw ITS domain with DOMAIN_BUS_NEXUS. This will allow MSI providers built on top of the raw ITS domain to identify it. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-13-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/gicv3-its: Split PCI/MSI code from the core ITS driverMarc Zyngier
It is becoming obvious that having the PCI/MSI code in the same file as the the core ITS code is giving people implementing non-PCI MSI support the wrong kind of idea. In order to make things a bit clearer, let's move the PCI/MSI code out to its own file. Hopefully it will make it clear that whoever thinks of hooking into the core ITS better have a very strong point. We use a temporary entry point that will get removed in a subsequent patch, once the proper infrastructure is added. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-12-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30Merge branch 'linus' into irq/coreThomas Gleixner
Pull in upstream fixes before applying conflicting changes
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-03 10:31:06 +0000