summaryrefslogtreecommitdiff
path: root/drivers/dma/sun6i-dma.c
AgeCommit message (Collapse)Author
2015-05-08dmaengine: sun6i: Add support for Allwinner H3 (sun8i) variantJens Kuske
The H3 SoC has the same dma engine as the A31 (sun6i), with a reduced amount of endpoints and physical channels. Add the proper config data and compatible string to support it. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18Merge branch 'topic/alloc_removal' into for-linusVinod Koul
2015-03-18dmaengine: sun6i: remove device_alloc_chan_resources handlerVinod Koul
Now that device_alloc_chan_resources handler in not mandatory, remove dummy implementations Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18dmaengine: constify of_device_id arrayFabian Frederick
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: sun6i: Declare slave capabilities for the generic codeMaxime Ripard
Now that the generic slave caps code can make use of the device assigned capabilities, instead of relying on a callback to be implemented. Make use of this code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: sun6i: Split device_controlMaxime Ripard
Split the device_control callback of the Allwinner A31 DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-12Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "Main features this time are: - BAM v1.3.0 support form qcom bam dma - support for Allwinner sun8i dma - atmels eXtended DMA Controller driver - chancnt cleanup by Maxime - fixes spread over drivers" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits) dmaenegine: Delete a check before free_percpu() dmaengine: ioatdma: fix dma mapping errors dma: cppi41: add a delay while setting the TD bit dma: cppi41: wait longer for the HW to return the descriptor dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model dmaengine: fsl-edma: fix calculation of remaining bytes drivers/dma/pch_dma: declare pch_dma_id_table as static dmaengine: ste_dma40: fix error return code dma: imx-sdma: clarify about firmware not found error Documentation: devicetree: Fix Xilinx VDMA specification dmaengine: pl330: update author info dmaengine: clarify the issue_pending expectations dmaengine: at_xdmac: Add DMA_PRIVATE ARM: dts: at_xdmac: fix bad value of dma-cells in documentation dmaengine: at_xdmac: fix missing spin_unlock dmaengine: at_xdmac: fix a bug in transfer residue computation dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status() dmaengine: at_xdmac: remove chancnt affectation dmaengine: at_xdmac: prefer usage of readl/writel_relaxed dmaengine: xdmac: fix print warning on dma_addr_t variable ...
2014-11-17dmaengine: sun6i: Add support for Allwinner A23 (sun8i) variantChen-Yu Tsai
The A23 SoC has the same dma engine as the A31 (sun6i), with a reduced amount of endpoints and physical channels. Add the proper config data and compatible string to support it. A slight difference in sun8i is an undocumented register needs to be toggled for dma to function. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: sun6i: support parameterized compatible stringsChen-Yu Tsai
This patch adds support for hardware parameters tied to compatible strings, so similar hardware can reuse the driver. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-12dmaengine: sun6i: Fix memcpy operationMaxime Ripard
The prep_memcpy call was not setting any meaningful burst and width because it was relying on the dma_slave_config was not set already. Rework the needed conversion functions, and hardcode the width and burst to use. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06dmaengine: sun6i: Remove chancnt affectationsMaxime Ripard
chanctnt is already filled by dma_async_device_register, which uses the channel list to know how much channels there is. Since it's already filled, we can safely remove it from the drivers' probe function. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-24dmaengine: sun6i: Remove obsolete clk muxing codeChen-Yu Tsai
The sun6i DMA controller requires the AHB1 bus clock to be clocked from PLL6. This was originally done by the dmaengine driver during probe time. The AHB1 clock driver has since been unified, so the original code does not work. Remove the clk muxing code, and replace it with DT clk default properties. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-30dmaengine: sun6i: Fix memory leaksMaxime Ripard
The sun6i_dma_prep_memcpy and sun6i_dma_prep_slave_sg functions were both leaking the descriptor they allocated if an error was happening after a successful dma_pool_alloc call. It also fixes a memleak that was happening in the scatter gather list traversal, that was allocating as much descriptor as there was scatter gather items, but only freeing the current descriptor if an error was to arise. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-30dmaengine: sun6i: Free the interrupt before killing the taskletMaxime Ripard
There's still a small window between the call to sun6i_kill_tasklet and the end of the driver remove function where a spurious interrupt might trigger, and start using deallocated resources. Replace the call to synchronize_irq by a free_irq, so that we're sure that we won't get any further interrupts when we're deallocating resources. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-30dmaengine: sun6i: Remove switch statement from buswidth convertion routineMaxime Ripard
Since the conversion routine is quite trivial, we don't need this switch, and we can just use a simple calculation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28dmaengine: sun61: fix warning on bad print specfierVinod Koul
The sg_dma_len() returns unsigned int but we had driver print it as %zu, use %u as documented in Documentation/printk-formats.txt drivers/dma/sun6i-dma.c: In function ‘sun6i_dma_prep_slave_sg’: drivers/dma/sun6i-dma.c:643: warning: format ‘%zu’ expects type ‘size_t’, but argument 8 has type ‘unsigned int’ drivers/dma/sun6i-dma.c:661: warning: format ‘%zu’ expects type ‘size_t’, but argument 8 has type ‘unsigned int’ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28dmaengine: sun6i: fix build failure on x86, xilinx targetsVinod Koul
Since the driver defined COMPILE_TEST, it gets compiled for different arch's The driver uses __virt_to_phys() insteadof virt_to_phys, so replace it drivers/dma/sun6i-dma.c: In function ‘sun6i_dma_dump_chan_regs’: drivers/dma/sun6i-dma.c:203: error: implicit declaration of function '__virt_to_phys' Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25dmaengine: sun6i: Add driver for the Allwinner A31 DMA controllerMaxime Ripard
The Allwinner A31 has a 16 channels DMA controller that it shares with the newer A23. Although sharing some similarities with the DMA controller of the older Allwinner SoCs, it's significantly different, I don't expect it to be possible to share the driver for these two. The A31 Controller is able to memory-to-memory or memory-to-device transfers on the 16 channels in parallel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>