summaryrefslogtreecommitdiff
path: root/drivers/cpuidle
AgeCommit message (Collapse)Author
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-10-09Merge tag 'pm+acpi-3.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Features-wise, to me the most important this time is a rework of wakeup interrupts handling in the core that makes them work consistently across all of the available sleep states, including suspend-to-idle. Many thanks to Thomas Gleixner for his help with this work. Second is an update of the generic PM domains code that has been in need of some care for quite a while. Unused code is being removed, DT support is being added and domains are now going to be attached to devices in bus type code in analogy with the ACPI PM domain. The majority of work here was done by Ulf Hansson who also has been the most active developer this time. Apart from this we have a traditional ACPICA update, this time to upstream version 20140828 and a few ACPI wakeup interrupts handling patches on top of the general rework mentioned above. There also are several cpufreq commits including renaming the cpufreq-cpu0 driver to cpufreq-dt, as this is what implements generic DT-based cpufreq support, and a new DT-based idle states infrastructure for cpuidle. In addition to that, the ACPI LPSS driver is updated, ACPI support for Apple machines is improved, a few bugs are fixed and a few cleanups are made all over. Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree maintained by Kevin Hilman that will be merged through the PM tree. Numbers-wise, the generic PM domains update takes the lead this time with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd place goes to the wakeup interrupts handling rework (13 commits). Specifics: - Rework the handling of wakeup IRQs by the IRQ core such that all of them will be switched over to "wakeup" mode in suspend_device_irqs() and in that mode the first interrupt will abort system suspend in progress or wake up the system if already in suspend-to-idle (or equivalent) without executing any interrupt handlers. Among other things that eliminates the wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt flag with interrupts which don't really need it and should not use it (Thomas Gleixner and Rafael Wysocki) - Switch over ACPI to handling wakeup interrupts with the help of the new mechanism introduced by the above IRQ core rework (Rafael Wysocki) - Rework the core generic PM domains code to eliminate code that's not used, add DT support and add a generic mechanism by which devices can be added to PM domains automatically during enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa). - Add debugfs-based mechanics for debugging generic PM domains (Maciej Matraszek). - ACPICA update to upstream version 20140828. Included are updates related to the SRAT and GTDT tables and the _PSx methods are in the METHOD_NAME list now (Bob Moore and Hanjun Guo). - Add _OSI("Darwin") support to the ACPI core (unfortunately, that can't really be done in a straightforward way) to prevent Thunderbolt from being turned off on Apple systems after boot (or after resume from system suspend) and rework the ACPI Smart Battery Subsystem (SBS) driver to work correctly with Apple platforms (Matthew Garrett and Andreas Noever). - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code, adding support for 133MHz I2C source clock on Intel Baytrail to it and making it avoid using UART RTS override with Auto Flow Control (Heikki Krogerus). - ACPI backlight updates removing the video_set_use_native_backlight quirk which is not necessary any more, making the code check the list of output devices returned by the _DOD method to avoid creating acpi_video interfaces that won't work and adding a quirk for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak) - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin) - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes, Sudip Mukherjee, Yijing Wang, and Zhang Rui) - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy, Rasmus Villemoes) - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U Murthy, Shilpasri G Bhat, Lucas Stach) - cpuidle support for DT-based idle states infrastructure, new ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus Villemoes) - ARM big.LITTLE cpuidle driver updates: support for DT-based initialization and Exynos5800 compatible string (Lorenzo Pieralisi, Kevin Hilman) - Rework of the test_suspend kernel command line argument and a new trace event for console resume (Srinivas Pandruvada, Todd E Brandt) - Second attempt to optimize swsusp_free() (hibernation core) to make it avoid going through all PFNs which may be way too slow on some systems (Joerg Roedel) - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide). - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman) - PM core fix related to clock management (Geert Uytterhoeven) - PM core's sysfs code cleanup (Johannes Berg)" * tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits) ACPI / fan: printk replacement PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME PM / Domains: Rename cpu_data to cpuidle_data cpufreq: cpufreq-dt: fix potential double put of cpu OF node cpufreq: cpu0: rename driver and internals to 'cpufreq_dt' PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free() cpufreq: ppc-corenet: remove duplicate update of cpu_data ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle PM / sleep: Rename platform suspend/resume functions in suspend.c PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq() ACPICA: Introduce acpi_enable_all_wakeup_gpes() ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block() ACPI / video: check _DOD list when creating backlight devices PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h cpufreq: Replace strnicmp with strncasecmp cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum cpufreq: Allow stop CPU callback to be used by all cpufreq drivers PM / devfreq: exynos: Enable building exynos PPMU as module PM / devfreq: Export helper functions for drivers ...
2014-10-08Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
2014-09-25Merge branch 'cpuidle/3.18' of ↵Rafael J. Wysocki
https://git.linaro.org/people/daniel.lezcano/linux into pm-cpuidle Pull ARM cpuidle changes for v3.18 from Daniel Lezcano: "this pull request contains the following changes: * Lorenzo Pieralisi implemented a framework to initialize the ARM cpuidle drivers with the DT. As an example, it provided a couple of drivers using it: arm64 and big little. The former one is a new driver while the latter is a change. There was also a patch for Exynos allowing to use this framework but as it depends on a change in Samsung's tree, I postponed this patch until the change is visible after the merge. The set of changes depends on some other changes made in the ARM64 tree, for this reason a shared branch is used. This is why there is a merge from arm64 in my pull request. I believe we already used this procedure. * Kevin Hilman added the compatible string for the exynos 5800 in the DT" * 'cpuidle/3.18' of https://git.linaro.org/people/daniel.lezcano/linux: drivers: cpuidle: initialize big.LITTLE driver through DT drivers: cpuidle: CPU idle ARM64 driver drivers: cpuidle: implement DT based idle states infrastructure cpuidle: big.LITTLE: add Exynos5800 compatible string arm64: add PSCI CPU_SUSPEND based cpu_suspend support arm64: kernel: introduce cpu_init_idle CPU operation arm64: kernel: refactor the CPU suspend API for retention states Documentation: arm: define DT idle states bindings
2014-09-25Merge tag 'zynq-cleanup-for-3.18' of git://git.xilinx.com/linux-xlnx into ↵Arnd Bergmann
next/soc Pull "arm: Xilinx Zynq cleanup patches for v3.18" from Michal Simek: - PM support - Fix L2 useless setting Signed-off-by: Arnd Bergmann <arnd@arndb.de> * tag 'zynq-cleanup-for-3.18' of git://git.xilinx.com/linux-xlnx: ARM: zynq: Remove useless L2C AUX setting ARM: zynq: Rename 'zynq_platform_cpu_die' ARM: zynq: Remove hotplug.c ARM: zynq: Synchronise zynq_cpu_die/kill ARM: zynq: cpuidle: Remove pointless code ARM: zynq: Remove invalidate cache for cpu die ARM: zynq: PM: Enable DDR clock stop ARM: zynq: DT: Add DDRC node Documentation: devicetree: Add binding for Synopsys DDR controller ARM: zynq: PM: Enable A9 internal clock gating feature
2014-09-25drivers: cpuidle: initialize big.LITTLE driver through DTLorenzo Pieralisi
With the introduction of DT based idle states, CPUidle drivers for ARM can now initialize idle states data through properties in the device tree. This patch adds code to the big.LITTLE CPUidle driver to dynamically initialize idle states data through the updated device tree source file. Cc: Chander Kashyap <k.chander@samsung.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-25drivers: cpuidle: CPU idle ARM64 driverLorenzo Pieralisi
This patch implements a generic CPU idle driver for ARM64 machines. It relies on the DT idle states infrastructure to initialize idle states count and respective parameters. Current code assumes the driver is managing idle states on all possible CPUs but can be easily generalized to support heterogenous systems and build cpumasks at runtime using MIDRs or DT cpu nodes compatible properties. The driver relies on the arm64 CPU operations to call the idle initialization hook used to parse and save suspend back-end specific idle states information upon probing. Idle state index 0 is always initialized as a simple wfi state, ie always considered present and functional on all ARM64 platforms. Idle state indices higher than 0 trigger idle state entry by calling the cpu_suspend function, that triggers the suspend operation through the CPU operations suspend back-end hook. cpu_suspend passes the idle state index as a parameter so that the CPU operations suspend back-end can retrieve the required idle state data by using the idle state index to execute a look-up on its internal data structures. Reviewed-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-25drivers: cpuidle: implement DT based idle states infrastructureLorenzo Pieralisi
On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-25cpuidle: big.LITTLE: add Exynos5800 compatible stringKevin Hilman
Exynos 5800 is big.LITTLE SoC compatible with the 5420. Add the compatible string so this driver works on the 5800. Tested on exynos5800-peach-pi (aka Samsung Chromebook2) Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-25cpuidle: Replace strnicmp with strncasecmpRasmus Villemoes
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-24sched: Let the scheduler see CPU idle statesDaniel Lezcano
When the cpu enters idle, it stores the cpuidle state pointer in its struct rq instance which in turn could be used to make a better decision when balancing tasks. As soon as the cpu exits its idle state, the struct rq reference is cleared. There are a couple of situations where the idle state pointer could be changed while it is being consulted: 1. For x86/acpi with dynamic c-states, when a laptop switches from battery to AC that could result on removing the deeper idle state. The acpi driver triggers: 'acpi_processor_cst_has_changed' 'cpuidle_pause_and_lock' 'cpuidle_uninstall_idle_handler' 'kick_all_cpus_sync'. All cpus will exit their idle state and the pointed object will be set to NULL. 2. The cpuidle driver is unloaded. Logically that could happen but not in practice because the drivers are always compiled in and 95% of them are not coded to unregister themselves. In any case, the unloading code must call 'cpuidle_unregister_device', that calls 'cpuidle_pause_and_lock' leading to 'kick_all_cpus_sync' as mentioned above. A race can happen if we use the pointer and then one of these two scenarios occurs at the same moment. In order to be safe, the idle state pointer stored in the rq must be used inside a rcu_read_lock section where we are protected with the 'rcu_barrier' in the 'cpuidle_uninstall_idle_handler' function. The idle_get_state() and idle_put_state() accessors should be used to that effect. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linaro-kernel@lists.linaro.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-23Merge tag 'mvebu-fixes-3.17' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
next/fixes-non-critical Merge "mvebu fixes for v3.17" from Jason Cooper: - kirkwood - final driver cleanup of ARCH_KIRKWOOD removal - fix DT based DSA - mvebu - use BCH ECC for the RN2120 and RN104/2 nand chips * tag 'mvebu-fixes-3.17' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Netgear RN102: Use Hardware BCH ECC ARM: Kirkwood: Fix DT based DSA. ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC ARM: mvebu: Netgear RN104: Use Hardware BCH ECC cpufreq: Remove ARCH_KIRKWOOD dependency watchdog: Remove ARCH_KIRKWOOD dependency rtc: Remove ARCH_KIRKWOOD dependency leds: Remove ARCH_KIRKWOOD dependency thermal: Remove ARCH_KIRKWOOD dependency ata: Remove ARCH_KIRKWOOD dependency cpuidle: kirkwood: Remove ARCH_KIRKWOOD dependency
2014-09-19cpuidle: Use wake_up_all_idle_cpus() to wake up all idle cpusChuansheng Liu
Currently kick_all_cpus_sync() or smp_call_function() can not break the polling idle cpu immediately. Instead using wake_up_all_idle_cpus() which can wake up the polling idle cpu quickly is much more helpful for power. Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-pm@vger.kernel.org Cc: changcheng.liu@intel.com Cc: xiaoming.wang@intel.com Cc: souvik.k.chakravarty@intel.com Cc: luto@amacapital.net Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/1409815075-4180-3-git-send-email-chuansheng.liu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-16ARM: zynq: cpuidle: Remove pointless codeDaniel Lezcano
The core is not powered down, it is pointless to call the cpu_pm notifiers and switch to the global timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-and-tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09cpuidle: kirkwood: Remove ARCH_KIRKWOOD dependencyAndrew Lunn
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Use MACH_KIRKWOOD, which is set when kirkwood is built as part of mach-mvebu. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/1409417172-6846-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-27ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part numberJuri Lelli
Commit af040ffc9ba1 ("ARM: make it easier to check the CPU part number correctly") changed ARM_CPU_PART_X masks, and the way they are returned and checked against. Usage of read_cpuid_part_number() is now deprecated, and calling places updated accordingly. This actually broke cpuidle-big_little initialization, as bl_idle_driver_init() performs a check using an hardcoded mask on cpu_id. Create an interface to perform the check (that is now even easier to read). Define also a proper mask (ARM_CPU_PART_MASK) that makes this kind of checks cleaner and helps preventing bugs in the future. Update usage accordingly. Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-08-26drivers/cpuidle: Replace __get_cpu_var uses for address calculationChristoph Lameter
All of these are for address calculation. Replace with this_cpu_ptr(). Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Acked-by: Rafael J. Wysocki <rjw@sisk.pl> [cpufreq changes] Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-14Merge tag 'pm+acpi-3.17-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are a couple of regression fixes, cpuidle menu governor optimizations, fixes for ACPI proccessor and battery drivers, hibernation fix to avoid problems related to the e820 memory map, fixes for a few cpufreq drivers and a new version of the suspend profiling tool analyze_suspend.py. Specifics: - Fix for an ACPI-based device hotplug regression introduced in 3.14 that causes a kernel panic to trigger when memory hot-remove is attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen - Fix for a cpufreq regression introduced in 3.16 that triggers a "sleeping function called from invalid context" bug in dev_pm_opp_init_cpufreq_table() from Stephen Boyd - ACPI battery driver fix for a warning message added in 3.16 that prints silly stuff sometimes from Mariusz Ceier - Hibernation fix for safer handling of mismatches in the 820 memory map between the configurations during image creation and during the subsequent restore from Chun-Yi Lee - ACPI processor driver fix to handle CPU hotplug notifications correctly during system suspend/resume from Lan Tianyu - Series of four cpuidle menu governor cleanups that also should speed it up a bit from Mel Gorman - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann and Uwe Kleine-König - Version 3.0 of the analyze_suspend.py suspend profiling tool from Todd E Brandt" * tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Fix warning message in acpi_battery_get_state() PM / tools: analyze_suspend.py: update to v3.0 cpufreq: arm_big_little: fix module license spec cpufreq: speedstep-smi: fix decimal printf specifiers ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove() cpufreq: OPP: Avoid sleeping while atomic cpufreq: cpu0: Do not print error message when deferring cpufreq: integrator: Use set_cpus_allowed_ptr PM / hibernate: avoid unsafe pages in e820 reserved regions ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events cpuidle: menu: Lookup CPU runqueues less cpuidle: menu: Call nr_iowait_cpu less times cpuidle: menu: Use ktime_to_us instead of reinventing the wheel cpuidle: menu: Use shifts when calculating averages where possible
2014-08-09ARM: EXYNOS: Fix suspend/resume sequencesTomasz Figa
Due to recent consolidation of Exynos suspend and cpuidle code, some parts of suspend and resume sequences are executed two times, once from exynos_pm_syscore_ops and then from exynos_cpu_pm_notifier() and thus it breaks suspend, at least on Exynos4-based boards. In addition, simple core power down from a cpuidle driver could, in case of CPU 0 could result in calling functions that are specific to suspend and deeper idle states. This patch fixes the issue by moving those operations outside the CPU PM notifier into suspend and AFTR code paths. This leads to a bit of code duplication, but allows additional code simplification, so in the end more code is removed than added. Fixes: 85f9f90808b4 ("ARM: EXYNOS: Use the cpu_pm notifier for pm") Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: arm@kernel.org Signed-off-by: Tomasz Figa <t.figa@samsung.com> [b.zolnierkie: ported patch over current changes] [b.zolnierkie: fixed exynos_aftr_finisher() return value] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-07Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
2014-08-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree changes from Jiri Kosina: "Summer edition of trivial tree updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: fix two typos in watchdog-api.txt irq-gic: remove file name from heading comment MAINTAINERS: Add miscdevice.h to file list for char/misc drivers. scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference doc: replace "practise" with "practice" in Documentation befs: remove check for CONFIG_BEFS_RW scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY' drivers/usb/phy/phy.c: remove a leading space mfd: fix comment cpuidle: fix comment doc: hpfall.c: fix missing null-terminate after strncpy call usb: doc: hotplug.txt code typos kbuild: fix comment in Makefile.modinst SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION ARM: msm: Remove MSM_SCM crypto: Remove MPILIB_EXTRA doc: CN: remove dead link, kerneltrap.org no longer works media: update reference, kerneltrap.org no longer works hexagon: update reference, kerneltrap.org no longer works doc: LSM: update reference, kerneltrap.org no longer works ...
2014-08-06cpuidle: menu: Lookup CPU runqueues lessMel Gorman
The menu governer makes separate lookups of the CPU runqueue to get load and number of IO waiters but it can be done with a single lookup. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-06cpuidle: menu: Call nr_iowait_cpu less timesMel Gorman
menu_select() via inline functions calls nr_iowait_cpu() twice as much as necessary. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-06cpuidle: menu: Use ktime_to_us instead of reinventing the wheelMel Gorman
The ktime_to_us implementation is slightly better than the one implemented in menu.c. Use it Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-06cpuidle: menu: Use shifts when calculating averages where possibleMel Gorman
We use do_div even though the divisor will usually be a power-of-two unless there are unusual outliers. Use shifts where possible Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-05powerpc/cpuidle: Fix parsing of idle state flags from device-treeVaidyanathan Srinivasan
Flags from device-tree need to be parsed with accessors for interpreting correct value in little-endian. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Reviewed-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-29cpuidle: Remove time measurement in poll stateDaniel Lezcano
The time measurement is already done in the cpuidle framework in the 'cpuidle_enter_state' function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-29cpuidle: Remove manual selection of the multiple driver supportDaniel Lezcano
Like the coupled idle state, it is not up to the user to set this option but the driver to select it. Remove the interactive selection of this option. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-29cpuidle: ladder governor - use macro instead of hardcoded valueMohammad Merajul Islam Molla
use CPUIDLE_DRIVER_STATE_START, instead of hardcoded value 0. As, CPUIDLE_DRIVER_STATE_START can be 1/0 based on CONFIG_ARCH_HAS_CPU_RELAX is defined or not. Signed-off-by: Mohammad Merajul Islam Molla <meraj.enigma@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-29cpuidle: big_little: Fix build errorSachin Kamat
big_little CPU idle driver references functions defined in MCPM driver. Thus make it depend on MCPM to avoid the following errors: drivers/built-in.o: In function `bl_enter_powerdown': drivers/cpuidle/cpuidle-big_little.c:134: undefined reference to `mcpm_cpu_powered_up' drivers/built-in.o: In function `bl_powerdown_finisher': drivers/cpuidle/cpuidle-big_little.c:104: undefined reference to `mcpm_set_entry_vector' drivers/cpuidle/cpuidle-big_little.c:111: undefined reference to `mcpm_cpu_suspend' make: *** [vmlinux] Error 1 Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-28cpuidle: menu governor - remove unused macro STDDEV_THRESHMohammad Merajul Islam Molla
STDDEV_THRESH was once defined and used in menu governor. But now its no longer used anywhere. So removing the define. Signed-off-by: Mohammad Merajul Islam Molla <meraj.enigma@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-26Merge tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/soc Merge "mvebu SoC changes for v3.17 (round 4)" from Jason Cooper: - Armada XP - Fix return value check in pmsu code - Document URLs for new public datasheets (Thanks, Marvell & free-electrons!) - Armada 370/38x - Add cpuidle support - mvebu - Fix build when no platforms are selected - Update EBU SoC status in docs * tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu: (21 commits) Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ARM: mvebu: make the snoop disabling optional in mvebu_v7_pmsu_idle_prepare() ARM: mvebu: use a local variable to store the resume address ARM: mvebu: make the cpuidle initialization more generic ARM: mvebu: rename the armada_370_xp symbols to mvebu_v7 in pmsu.c ARM: mvebu: use the common function for Armada 375 SMP workaround ARM: mvebu: add a common function for the boot address work around ARM: mvebu: sort the #include of pmsu.c in alphabetic order ARM: mvebu: split again armada_370_xp_pmsu_idle_enter() in PMSU code ARM: mvebu: fix return value check in armada_xp_pmsu_cpufreq_init() clk: mvebu: extend clk-cpu for dynamic frequency scaling ARM: mvebu: extend PMSU code to support dynamic frequency scaling ... Conflicts: arch/arm/mach-mvebu/Kconfig drivers/cpuidle/cpuidle-armada-370-xp.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-24cpuidle: mvebu: add Armada 38x supportThomas Petazzoni
This commit adds the list of cpuidle states supported by the Armada 38x SoC in the cpuidle-mvebu-v7 driver, as well as the necessary logic around it to support this SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/1406120453-29291-14-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24cpuidle: mvebu: add Armada 370 supportThomas Petazzoni
This commit adds the list of cpuidle states supported by the Armada 370 SoC in the cpuidle-mvebu-v7 driver, as well as the necessary logic around it to support this SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/1406120453-29291-13-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7Gregory CLEMENT
This driver will be able to manage the cpuidle for more SoCs than just Armada 370 and XP. It will also support Armada 38x and potentially other SoC of the Marvell Armada EBU family. To take this into account, this patch renames the driver and its symbols. It also changes the driver name from cpuidle-armada-370-xp to cpuidle-armada-xp, because separate platform drivers will be registered for the other SoC types. This change must be done simultaneously in the cpuidle driver and in the PMSU code in order to remain bisectable. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/1406120453-29291-12-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-19cpuidle: fix permission for driver name sysfs nodeMohammad Merajul Islam Molla
cpuidle driver name sysfs node is read-only, so permissions should be 0444. Signed-off-by: Mohammad Merajul Islam Molla <meraj.enigma@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-19cpuidle: big.LITTLE: init driver for exynos5420Chander Kashyap
Add "samsung,exynos5420" compatible string to initialize generic big-little cpuidle driver for Exynos5420. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in configChander Kashyap
Add support to select generic big-little cpuidle driver for Samsung Exynos series SoC's. This is required for Exynos big-llittle SoC's eg, Exynos5420. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19cpuidle: big.LITTLE: add of_device_id structureChander Kashyap
This driver will be used by many big.Little Soc's. As of now it does string matching of hardcoded compatible string to init the driver. This comparison list will keep on growing with addition of new SoC's. Hence add of_device_id structure to collect the compatible strings of SoC's using this driver. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-09cpuidle: move idle traces to cpuidle_enter_state()Sandeep Tripathy
idle_exit event is the first event after a core exits idle state. So this should be traced before local irq is ebabled. Likewise idle_entry is the last event before a core enters idle state. This will ease visualising the cpu idle state from kernel traces. Signed-off-by: Sandeep Tripathy <sandeep.tripathy@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> [rjw: Subject, rebase] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-19cpuidle: fix commentAntonio Ospite
Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: "tuukka.tikkanen@linaro.org" <tuukka.tikkanen@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-18cpuidle: mvebu: Fix the name of the statesGregory CLEMENT
The length name of the states 2 was too long to fit in the allocated string (limited to 16 bytes). This lead to improper string displayed through sysfs. This patch shorten the name by removing the reference to Marvell and to the CPU as both are implicit. For coherency the same change have been done for the states 1. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc updates from Ben Herrenschmidt: "Here are the remaining bits I was mentioning earlier. Mostly bug fixes and new selftests from Michael (yay !). He also removed the WSP platform and A2 core support which were dead before release, so less clutter. One little "feature" I snuck in is the doorbell IPI support for non-virtualized P8 which speeds up IPIs significantly between threads of a core" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/book3s: Fix some ABIv2 issues in machine check code powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest. powerpc/book3s: Increment the mce counter during machine_check_early call. powerpc/book3s: Add stack overflow check in machine check handler. powerpc/book3s: Fix machine check handling for unhandled errors powerpc/eeh: Dump PE location code powerpc/powernv: Enable POWER8 doorbell IPIs powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry powerpc/powernv: Fix killed EEH event powerpc: fix typo 'CONFIG_PMAC' powerpc: fix typo 'CONFIG_PPC_CPU' powerpc/powernv: Don't escalate non-existing frozen PE powerpc/eeh: Report frozen parent PE prior to child PE powerpc/eeh: Clear frozen state for child PE powerpc/powernv: Reduce panic timeout from 180s to 10s powerpc/xmon: avoid format string leaking to printk selftests/powerpc: Add tests of PMU EBBs selftests/powerpc: Add support for skipping tests selftests/powerpc: Put the test in a separate process group selftests/powerpc: Fix instruction loop for ABIv2 (LE) ...
2014-06-12Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more scheduler updates from Ingo Molnar: "Second round of scheduler changes: - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski - continued power scheduling cleanups and refactorings, from Nicolas Pitre - misc fixes and enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Delete extraneous extern for to_ratio() sched/idle: Optimize try-to-wake-up IPI sched/idle: Simplify wake_up_idle_cpu() sched/idle: Clear polling before descheduling the idle thread sched, trace: Add a tracepoint for IPI-less remote wakeups cpuidle: Set polling in poll_idle sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...) sched: Rename capacity related flags sched: Final power vs. capacity cleanups sched: Remove remaining dubious usage of "power" sched: Let 'struct sched_group_power' care about CPU capacity sched/fair: Disambiguate existing/remaining "capacity" usage sched/fair: Change "has_capacity" to "has_free_capacity" sched/fair: Remove "power" from 'struct numa_stats' sched: Fix signedness bug in yield_to() sched/fair: Use time_after() in record_wakee() sched/balancing: Reduce the rate of needless idle load balancing sched/fair: Fix unlocked reads of some cfs_b->quota/period
2014-06-12Merge commit '3cf2f34' into sched/core, to fix build errorIngo Molnar
Fix this dependency on the locking tree's smp_mb*() API changes: kernel/sched/idle.c:247:3: error: implicit declaration of function ‘smp_mb__after_atomic’ [-Werror=implicit-function-declaration] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-11powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entryMichael Neuling
Currently when entering fastsleep we clear all LPCR PECE bits. This patch changes it to only clear the decrementer bit (ie. PECE1), which is the only bit we really need to clear here. This is needed if we want to set other wakeup causes like the PECEDH bit so we can use hypervisor doorbells on powernv. Also we no longer clear the MER bit as it should never be set in the host anyway. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...
2014-06-05cpuidle: Set polling in poll_idleAndy Lutomirski
poll_idle is the archetypal polling idle loop; tell the core idle code about it. This avoids pointless IPIs when all of the other cpuidle states are disabled. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: nicolas.pitre@linaro.org Cc: umgwanakikbuti@gmail.com Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/c65ce49615d338bae8fb79df5daffab19353c900.1401902905.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>