summaryrefslogtreecommitdiff
path: root/arch/s390/kvm
AgeCommit message (Collapse)Author
2008-05-07[S390] s390-kvm: leave sie context on work. Removes preemption requirementChristian Borntraeger
From: Martin Schwidefsky <schwidefsky@de.ibm.com> This patch fixes a bug with cpu bound guest on kvm-s390. Sometimes it was impossible to deliver a signal to a spinning guest. We used preemption as a circumvention. The preemption notifiers called vcpu_load, which checked for pending signals and triggered a host intercept. But even with preemption, a sigkill was not delivered immediately. This patch changes the low level host interrupt handler to check for the SIE instruction, if TIF_WORK is set. In that case we change the instruction pointer of the return PSW to rerun the vcpu_run loop. The kvm code sees an intercept reason 0 if that happens. This patch adds accounting for these types of intercept as well. The advantages: - works with and without preemption - signals are delivered immediately - much better host latencies without preemption Acked-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-04-30[S390] Move stfl to system.h and delete duplicated version.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-04-27KVM: add ioctls to save/store mpstateMarcelo Tosatti
So userspace can save/restore the mpstate during migration. [avi: export the #define constants describing the value] [christian: add s390 stubs] [avi: ditto for ia64] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: hlt emulation should take in-kernel APIC/PIT timers into accountMarcelo Tosatti
Timers that fire between guest hlt and vcpu_block's add_wait_queue() are ignored, possibly resulting in hangs. Also make sure that atomic_inc and waitqueue_active tests happen in the specified order, otherwise the following race is open: CPU0 CPU1 if (waitqueue_active(wq)) add_wait_queue() if (!atomic_read(pit_timer->pending)) schedule() atomic_inc(pit_timer->pending) Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: Stub out kvmtraceAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: rename stfl to kvm_stflHeiko Carstens
Temporarily rename this function to avoid merge conflicts and/or dependencies. This function will be removed as soon as git-s390 and kvm.git are finally upstream. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: Fix incorrect return valueHeiko Carstens
kvm_arch_vcpu_ioctl_run currently incorrectly always returns 0. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: add kvm to kconfig on s390Christian Borntraeger
This patch adds the virtualization submenu and the kvm option to the kernel config. It also defines HAVE_KVM for 64bit kernels. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: intercepts for diagnose instructionsChristian Borntraeger
This patch introduces interpretation of some diagnose instruction intercepts. Diagnose is our classic architected way of doing a hypercall. This patch features the following diagnose codes: - vm storage size, that tells the guest about its memory layout - time slice end, which is used by the guest to indicate that it waits for a lock and thus cannot use up its time slice in a useful way - ipl functions, which a guest can use to reset and reboot itself In order to implement ipl functions, we also introduce an exit reason that causes userspace to perform various resets on the virtual machine. All resets are described in the principles of operation book, except KVM_S390_RESET_IPL which causes a reboot of the machine. Acked-by: Martin Schwidefsky <martin.schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: interprocessor communication via sigpChristian Borntraeger
This patch introduces in-kernel handling of _some_ sigp interprocessor signals (similar to ipi). kvm_s390_handle_sigp() decodes the sigp instruction and calls individual handlers depending on the operation requested: - sigp sense tries to retrieve information such as existence or running state of the remote cpu - sigp emergency sends an external interrupt to the remove cpu - sigp stop stops a remove cpu - sigp stop store status stops a remote cpu, and stores its entire internal state to the cpus lowcore - sigp set arch sets the architecture mode of the remote cpu. setting to ESAME (s390x 64bit) is accepted, setting to ESA/S390 (s390, 31 or 24 bit) is denied, all others are passed to userland - sigp set prefix sets the prefix register of a remote cpu For implementation of this, the stop intercept indication starts to get reused on purpose: a set of action bits defines what to do once a cpu gets stopped: ACTION_STOP_ON_STOP really stops the cpu when a stop intercept is recognized ACTION_STORE_ON_STOP stores the cpu status to lowcore when a stop intercept is recognized Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: intercepts for privileged instructionsChristian Borntraeger
This patch introduces in-kernel handling of some intercepts for privileged instructions: handle_set_prefix() sets the prefix register of the local cpu handle_store_prefix() stores the content of the prefix register to memory handle_store_cpu_address() stores the cpu number of the current cpu to memory handle_skey() just decrements the instruction address and retries handle_stsch() delivers condition code 3 "operation not supported" handle_chsc() same here handle_stfl() stores the facility list which contains the capabilities of the cpu handle_stidp() stores cpu type/model/revision and such handle_stsi() stores information about the system topology Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: interrupt subsystem, cpu timer, waitpswCarsten Otte
This patch contains the s390 interrupt subsystem (similar to in kernel apic) including timer interrupts (similar to in-kernel-pit) and enabled wait (similar to in kernel hlt). In order to achieve that, this patch also introduces intercept handling for instruction intercepts, and it implements load control instructions. This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both the vm file descriptors and the vcpu file descriptors. In case this ioctl is issued against a vm file descriptor, the interrupt is considered floating. Floating interrupts may be delivered to any virtual cpu in the configuration. The following interrupts are supported: SIGP STOP - interprocessor signal that stops a remote cpu SIGP SET PREFIX - interprocessor signal that sets the prefix register of a (stopped) remote cpu INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed and for smp_call_function() in the guest. PROGRAM INT - exception during program execution such as page fault, illegal instruction and friends RESTART - interprocessor signal that starts a stopped cpu INT VIRTIO - floating interrupt for virtio signalisation INT SERVICE - floating interrupt for signalisations from the system service processor struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting an interrupt, also carrys parameter data for interrupts along with the interrupt type. Interrupts on s390 usually have a state that represents the current operation, or identifies which device has caused the interruption on s390. kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a disabled wait (that is, disabled for interrupts), we exit to userspace. In case of an enabled wait we set up a timer that equals the cpu clock comparator value and sleep on a wait queue. [christian: change virtio interrupt to 0x2603] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: sie intercept handlingChristian Borntraeger
This path introduces handling of sie intercepts in three flavors: Intercepts are either handled completely in-kernel by kvm_handle_sie_intercept(), or passed to userspace with corresponding data in struct kvm_run in case kvm_handle_sie_intercept() returns -ENOTSUPP. In case of partial execution in kernel with the need of userspace support, kvm_handle_sie_intercept() may choose to set up struct kvm_run and return -EREMOTE. The trivial intercept reasons are handled in this patch: handle_noop() just does nothing for intercepts that don't require our support at all handle_stop() is called when a cpu enters stopped state, and it drops out to userland after updating our vcpu state handle_validity() faults in the cpu lowcore if needed, or passes the request to userland Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: s390: arch backend for the kvm kernel moduleHeiko Carstens
This patch contains the port of Qumranet's kvm kernel module to IBM zSeries (aka s390x, mainframe) architecture. It uses the mainframe's virtualization instruction SIE to run virtual machines with up to 64 virtual CPUs each. This port is only usable on 64bit host kernels, and can only run 64bit guest kernels. However, running 31bit applications in guest userspace is possible. The following source files are introduced by this patch arch/s390/kvm/kvm-s390.c similar to arch/x86/kvm/x86.c, this implements all arch callbacks for kvm. __vcpu_run calls back into sie64a to enter the guest machine context arch/s390/kvm/sie64a.S assembler function sie64a, which enters guest context via SIE, and switches world before and after that include/asm-s390/kvm_host.h contains all vital data structures needed to run virtual machines on the mainframe include/asm-s390/kvm.h defines kvm_regs and friends for user access to guest register content arch/s390/kvm/gaccess.h functions similar to uaccess to access guest memory arch/s390/kvm/kvm-s390.h header file for kvm-s390 internals, extended by later patches Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>