summaryrefslogtreecommitdiff
path: root/arch/s390/kernel/head31.S
AgeCommit message (Collapse)Author
2015-03-25s390: remove 31 bit supportHeiko Carstens
Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/mm: Convert bootmem to memblockPhilipp Hachtmann
The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09s390/mm: let kernel text section always begin at 1MBHeiko Carstens
Let the kernel text section always begin at 1MB. This allows to always have a large frame in the identity mapping of the kernel image for beginning of the text section, if the machine has EDAT1 support. Moving the beginning from 64K to 1MB doesn't cost any memory, since we make the memory between 64K and 1MB available for the page allocator. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20s390/comments: unify copyright messages and remove file namesHeiko Carstens
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-10-30[S390] smp: external call vs. emergency signalMartin Schwidefsky
Use a sigp sense running to decide which signal processor order to use for an ipi. If the target cpu is running use external call, if the target cpu is not running use emergency signal. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24[S390] iucv cr0 enablement bitMartin Schwidefsky
Do not set the cr0 enablement bit for iucv by default in head[31|64].S, move the enablement to iucv_init in the iucv base layer. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24[S390] fix s390 assembler code alignmentsJan Glauber
The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-12[S390] correct address of _stext with CONFIG_SHARED_KERNEL=yMartin Schwidefsky
As of git commit 1844c9bc0b2fed3023551c1affe033ab38e90b9a head64.S/head31.S are not included in head.S anymore but build as an extra object. This breaks shared kernel support because the .org statement in head64.S/head31.S for CONFIG_SHARED_KERNEL=y will have a different effect. The end address of the head.text section in head.o will be added to the .org value, to compensate for this subtract 0x11000 to get the required value of 0x100000 again. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] add support for compressed kernelsMartin Schwidefsky
Add the "bzImage" compile target and the necessary code to generate compressed kernel images. The old style uncompressed "image" target is preserved, a simple make will build them both. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] Initialize __LC_THREAD_INFO early.Heiko Carstens
"lockdep: Fix backtraces" reveales a bug in early setup code: when lockdep tries to save a stack backtrace before setup_arch has been called the lowcore pointer for the current thread info pointer isn't initialized yet. However our save stack backtrace code relies on it. If the pointer isn't initialized the saved backtrace will have zero entries. lockdep however relies (correctly) on the fact that that cannot happen. A write access to some random memory region is the result. Fix this by initializing the thread info pointer early. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26[S390] eliminate ipl_device from lowcoreMartin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] Remove initial kernel stack backchain initialization.Heiko Carstens
Early init code clears the backchain of the initial kernel stack frame. This is not necessary since it is pre initialized with zeros. Plus it was broken on 64 bit since it cleared only four of eight bytes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] Add processor type march=z10 and a processor type safety check.Martin Schwidefsky
This patch adds the code generation option for IBM System z10 and adds a check in head[31,64].S to prevents the execution of a kernel compiled for a new processor type on an old machine. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-04-30[S390] Convert machine feature detection code to C.Heiko Carstens
From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Carsten Otte <cotte@de.ibm.com> This lets us use defines for the magic bits in machine flags instead of using plain numbers all over the place. In addition on newer machines features/facilities are indicated by the result of the stfl instruction. So we use these bits instead of trying to execute new instructions and check wether we get an exception or not. Also the mvpg instruction is always available when in zArch mode, whereas the idte instruction is only available in zArch mode. This results in some minor optimizations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-03-05[S390] Fixed handling of access register mode faults.Gerald Schaefer
Replaced check_user_space() + __check_access_register with the new check_space(). The old functions made wrong assumptions about kernel and user space when the kernel and user address spaces are switched (kernel in home space, user in primary/secondary space). Secondly the user process can switch to the accress register mode if it is running in primary or secondary mode. In addition it can load an arbitrary value to the access registers. If any other value than 0 for primary space or 1 for secondary space is loaded and memory is accessed using the base register related to the access register, the program should be terminated with a SIGSEGV. To achieve that the DUALD pointer in the DUCT and the PSALD pointer in the PASTE need to point to an array of 8 invalid access-list entries to get a ALEN-translation exception if an invalid alet is used. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-21[S390] nss: Free unused memory in kernel image.Heiko Carstens
With CONFIG_SHARED_KERNEL the kernel text segment that might be in a read only memory sections starts at 1MB. Memory between 0x12000 and 0x100000 is unused then. Free this, so we have appr. an extra MB of memory available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] Convert memory detection into C code.Heiko Carstens
Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] boot from NSS supportHongjie Yang
Add support to boot from a named saved segment (NSS). Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-01-09[S390] memory detection misses 128k.Hongjie Yang
Fix a memory leak problem in the memory detection routines. A memory leak of 128k occurs when we have a contiguous memory with mixed access-mode (read or write) ranges. Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] Memory detection fixes.Heiko Carstens
VMALLOC_END on 31bit should be 0x8000000UL instead of 0x7fffffffL. The page mask which is used to make sure memory_end is on 4MB/2MB boundary is wrong and not needed. Therefore remove it. Make sure a vmalloc area does also exist and work on (future) machines with 4TB and more memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] Cleanup memory_chunk array usage.Heiko Carstens
Need this at yet another file and don't want to add yet another extern... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] Misaligned wait PSW at memory detection.Heiko Carstens
If the memory detection code would ever reach the point where it would load the wait psw, it would generate a specification exception and the system would crash at ipl time. This is because of a misaligned wait psw. It needs to be on a double word boundary instead of a word boundary. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-04[S390] Remove crept in whitespace from head*.S again.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2006-10-01[PATCH] Directed yield: direct yield of spinlocks for s390.Martin Schwidefsky
Use the new diagnose 0x9c in the spinlock implementation for s390. It yields the remaining timeslice of the virtual cpu that tries to acquire a lock to the virtual cpu that is the current holder of the lock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-20[S390] convert some assembler to C.Heiko Carstens
Convert GET_IPL_DEVICE assembler macro to C function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] ipl/dump on panic.Michael Holzheu
It is now possible to specify a ccw/fcp dump device which is used to automatically create a system dump in case of a kernel panic. The dump device can be configured under /sys/firmware/dump. In addition it is now possible to specify a ccw/fcp device which is used for the next reboot of Linux. The reipl device can be configured under /sys/firmware/reipl. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] initrd vs. bootmem bitmap.Heiko Carstens
Move initrd if the bitmap of the bootmem allocator would overwrite it. In addition this patch sets the default size and address of the initrd to 0. Therefore all boot loaders must set the initrd size and address correctly. This is especially relevant for ftp boot via HMC/SE, where this change requires a special patch file entry in the .ins file which sets these two values contained at address 0x10408 and 0x10410. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-18[S390] .align 4096 statements in head.SHeiko Carstens
SLES9 binutils don't like .align 4096 statements in head.S. Work around this by using .org statements. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] head.S code moving.Heiko Carstens
There is almost no room left for any new code between 0x10000 and 0x10480. Move the code from 0x10000 to 0x11000. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] memory detection.Heiko Carstens
The wrong base register is used to read a value from the sclp data structure. The value is used to calculate the memory size. Use correct register %r4. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2005-11-07[PATCH] s390: merge common parts of head.S and head64.SHeiko Carstens
Merge common parts of head.S and head64.S into head.S and move architecture specific parts to head31.S and head64.S respectively. Saves us ~500 lines of duplicated assembly code. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>