summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/include
AgeCommit message (Collapse)Author
2012-06-05ARM: imx: clean and consolidate imx5 suspend and idle codeRobert Lee
The imx5 idle code that existed in mm-imx5.c is moved to pm-imx5.c. The imx5_pm_init call is now exported and called during the MACHINE_START late_init in supported imx5 platforms. Remove various enabling/disabling of the gpc_dvfs clock and enable it once during initialization. This is a very low power clock that must be enabled during low power operations. There are only two "suspend_state_t" imx5 low power modes ever used. STOP_POWER_OFF for suspend to mem and WAIT_UNCLOCKED_POWER_OFF for idle and suspend to standby. The latter mode only requires 500 nanoseconds of extra hardware exit time beyond a basic WFI operation (WAIT_CLOCKED mode) so no other idle mode is necessary. Given this information, it is more efficient to keep the registers in the often used WAIT_UNCLOCKED_POWER_OFF state and only to and from the STOP_POWER_OFF register state as needed when suspend to mem is required. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-06-05ARM: imx: Modify IMX_IO_P2V macroRobert Lee
A change is needed in the IMX_IO_P2V macro to allow all imx5 platforms to use common definitions when accessing registers of peripherals on the AIPS2 bus. With this change, IMX_IO_P2V(MX50_AIPS2_BASE_ADDR) == IMX_IO_P2V(MX51_AIPS2_BASE_ADDR) == IMX_IO_P2V(MX53_AIPS2_BASE_ADDR). This change was tested for mapping conflicts using the iop2v script found at git://git.pengutronix.de/git/ukl/imx-iop2v.git and by performing a bootup of a default build using imx_v6_v7_defconfig on a imx51 babbage board and imx53 loco board. The comments were modified to reflect the output given by the script which shows the virtual address mappings. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-26Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc device tree conversions (part 2) from Olof Johansson: "These continue the device tree work from part 1, this set is for the tegra, mxs and imx platforms, all of which have dependencies on clock or pinctrl changes submitted earlier." Fix up trivial conflicts due to nearby changes in drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: dt: tegra: invert status=disable vs status=okay ARM: dt: tegra: consistent basic property ordering ARM: dt: tegra: sort nodes based on bus order ARM: dt: tegra: remove duplicate device_type property ARM: dt: tegra: consistenly use lower-case for hex constants ARM: dt: tegra: format regs properties consistently ARM: dt: tegra: gpio comment cleanup ARM: dt: tegra: remove unnecessary unit addresses ARM: dt: tegra: whitespace cleanup ARM: dt: tegra cardhu: fix typo in SDHCI node name ARM: dt: tegra: cardhu: register core regulator tps62361 ARM: dt: tegra30.dtsi: Add SMMU node ARM: dt: tegra20.dtsi: Add GART node ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra: Add device tree support for AHB ARM: dts: enable audio support for imx28-evk ARM: dts: enable i2c device for imx28-evk i2c: mxs: add device tree probe support ARM: dts: enable mmc for imx28-evk ...
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some V4L2 API updates needed by embedded devices - DVB API extensions for ATSC-MH delivery system, used in US for mobile TV - new tuners for fc0011/0012/0013 and tua9001 - a new dvb driver for af9033/9035 - a new ATSC-MH frontend (lg2160) - new remote controller keymaps - Removal of a few legacy webcam driver that got replaced by gspca on several kernel versions ago - a new driver for Exynos 4/5 webcams(s5pp fimc-lite) - a new webcam sensor driver (smiapp) - a new video input driver for embedded (sta2x1xx) - several improvements, fixes, cleanups, etc inside the drivers. Manually fix up conflicts due to err() -> dev_err() conversion in drivers/staging/media/easycap/easycap_main.c * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits) [media] saa7134-cards: Remove a PCI entry added by mistake [media] radio-sf16fmi: add support for SF16-FMD [media] rc-loopback: remove duplicate line [media] patch for Asus My Cinema PS3-100 (1043:48cd) [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS [media] em28xx: simple comment fix [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2 [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom() [media] smiapp: Add support for 8-bit uncompressed formats [media] smiapp: Allow generic quirk registers [media] smiapp: Use non-binning limits if the binning limit is zero [media] smiapp: Initialise rval in smiapp_read_nvm() [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check [media] smiapp: Use 8-bit reads only before identifying the sensor [media] smiapp: Quirk for sensors that only do 8-bit reads [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client [media] smiapp: Allow using external clock from the clock framework [media] zl10353: change .read_snr() to report SNR as a 0.1 dB [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300) [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try ...
2012-05-16ARM i.MX: remove now unnecessary argument from mxc_timer_initSascha Hauer
As the timer code now does a clk_get to get its clock we don't need the struct clk argument anymore. This also changes the alternative EPIT timer to do a clk_get. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-15[media] media: mx2_camera: Fix mbus format handlingJavier Martin
Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags so that the driver can negotiate with the attached sensor whether the mbus format needs convertion from UYUV to YUYV or not. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-11ARM: imx6: Add UART2 for low-level debugDirk Behme
To be able to enable early debugging on boards using the UART2 for the console, add the option for early debugging on UART2. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08ARM: imx: use machine specific hook for late initShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-02ARM: mx53: fix pad definitions for MX53_PAD_EIM_D28__I2C1_SDA and ↵Lothar Waßmann
MX53_PAD_GPIO_8__CAN1_RXCAN MX53_PAD_EIM_D28__I2C1_SDA uses an undefined PAD_CTRL_I2C MX53_PAD_GPIO_8__CAN1_RXCAN has an incorrect input_select value Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-02ARM: i.MX51 iomux: add missed definitions for SION-bit and mode for some padsAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25ARM i.MX: prepare for common clock frameworkSascha Hauer
- Add necessary #ifdefs for CONFIG_COMMON_CLOCK - Add a global spinlock to protect the CCM registers Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-29Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-27Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
2012-03-27Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: SoC specific updates" from Arnd Bergmann: "These changes are all specific to an soc family or the code for one soc. Lots of work for Tegra3 this time, but also a lot of other platforms. There will be another (smaller) set of soc patches later in the merge window for stuff that has dependencies on external trees or that was sent just before the merge window opened. The asoc tree added a few devices to the i.mx platform, which conflict with other devices added in the same place here. The tegra Makefile conflicts between a number of branches, mostly because of changes regarding localtimer.c, which was removed in the end. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up some trivial conflicts, including the mentioned Tegra Makefile. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: EXYNOS: fix cycle count for periodic mode of clock event timers ARM: EXYNOS: add support JPEG ARM: EXYNOS: Add DMC1, allow PPMU access for DMC ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata() ARM: SAMSUNG: Add __init attribute to samsung_bl_set() ARM: S5PV210: Add usb otg phy control ARM: S3C64XX: Add usb otg phy control ARM: EXYNOS: Enable l2 configuration through device tree ARM: EXYNOS: remove useless code to save/restore L2 ARM: EXYNOS: save L2 settings during bootup ARM: S5P: add L2 early resume code ARM: EXYNOS: Add support AFTR mode on EXYNOS4210 ARM: mx35: Setup the AIPS registers ARM: mx5: Use common function for configuring AIPS ARM: mx3: Setup AIPS registers ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE ARM: imx: update imx_v6_v7_defconfig ARM: tegra: Demote EMC clock inconsistency BUG to WARN ...
2012-03-27Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: Non-critical bug fixes" from Ardn Bergmann: "Simple bug fixes that were not considered important enough for inclusion into 3.3. One bug fix was originally intended for 3.3 but accidentally got missed, but is not marked stable because it should only get backported once later fixes also make it into v3.4. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits) iomux-mx25.h slew rate adjusted for LCD __LD pins ARM: davinci: DA850: move da850_register_pm to .init.text ARM: davinci: cpufreq: fix compiler warning ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h ARM: OMAP2+: Fix section warnings for hsmmc_init_one ARM: OMAP2+: Fix build issues with missing include of linux/bug.h ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance ARM: OMAP3+: PM: VP: fix integer truncation error ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices() ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected ARM: OMAP1: Fix section mismatch for omap1_init_early() ARM: OMAP1: Fix typo in lcd_dma.c ARM: OMAP: mailbox: trivial whitespace fix ARM: OMAP: Remove definition cpu_is_omap4430() ARM: OMAP2+: included some headers twice ARM: OMAP: clock.c: included linux/debugfs.h twice ARM: OMAP: don't build hwspinlock in vain ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided ...
2012-03-23Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #1 ARM updates from Russell King: "This one covers stuff which Arnd is waiting for me to push, as this is shared between both our trees and probably other trees elsewhere. Essentially, this contains: - AMBA primecell device initializer updates - mostly shrinking the size of the device declarations in platform code to something more reasonable. - Getting rid of the NO_IRQ crap from AMBA primecell stuff. - Nicolas' idle cleanups. This in combination with the restart cleanups from the last merge window results in a great many mach/system.h files being deleted." Yay: ~80 files, ~2000 lines deleted. * 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits) ARM: remove disable_fiq and arch_ret_to_user macros ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER ARM: rpc: make default fiq handler run-time installed ARM: make arch_ret_to_user macro optional ARM: amba: samsung: use common amba device initializers ARM: amba: spear: use common amba device initializers ARM: amba: nomadik: use common amba device initializers ARM: amba: u300: use common amba device initializers ARM: amba: lpc32xx: use common amba device initializers ARM: amba: netx: use common amba device initializers ARM: amba: bcmring: use common amba device initializers ARM: amba: ep93xx: use common amba device initializers ARM: amba: omap2: use common amba device initializers ARM: amba: integrator: use common amba device initializers ARM: amba: realview: get rid of private platform amba_device initializer ARM: amba: versatile: get rid of private platform amba_device initializer ARM: amba: vexpress: get rid of private platform amba_device initializer ARM: amba: provide common initializers for static amba devices ARM: amba: make use of -1 IRQs warn ARM: amba: u300: get rid of NO_IRQ initializers ...
2012-03-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - V4L2 API additions to better support JPEG compression control - media API additions to properly support MPEG decoders - V4L2 API additions for image crop/scaling - a few other V4L2 API DocBook fixes/improvements - two new DVB frontend drivers: m88rs2000 and rtl2830 - two new DVB drivers: az6007 and rtl28xxu - a framework for ISA drivers, that removed lots of common code found at the ISA radio drivers - a new FM transmitter driver (radio-keene) - a GPIO-based IR receiver driver - a new sensor driver: mt9m032 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv, vs6624 - several new board additions, driver fixes, improvements and cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits) [media] update CARDLIST.em28xx [media] partially reverts changeset fa5527c [media] stb0899: fix the limits for signal strength values [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e) [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e) [media] -EINVAL -> -ENOTTY [media] gspca - sn9c20x: Cleanup source [media] gspca - sn9c20x: Simplify register write for capture start/stop [media] gspca - sn9c20x: Add automatic JPEG compression mechanism [media] gspca - sn9c20x: Greater delay in case of sensor no response [media] gspca - sn9c20x: Optimize the code of write sequences [media] gspca - sn9c20x: Add the JPEG compression quality control [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset [media] gspca - sn9c20x: Propagate USB errors to higher level [media] gspca - sn9c20x: Use the new video control mechanism [media] gspca - sn9c20x: Fix loss of frame start [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5 ...
2012-03-22Merge tag 'sound-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull updates of sound stuff from Takashi Iwai: "Here is the first big update chunk of sound stuff for 3.4-rc1. In the common sound infrastructure, there are a few changes for dynamic PCM support (used in ASoC) and a few clean-ups. Majority of changes are found, as usual, in HD-audio and ASoC. Some highlights of HD-audio changes: - All the long-standing static quirk codes for Realtek codec were finally removed by fixing and extending the Realtek auto-parser. - The mute-LED control is standardized over all HD-audio codec drivers using the extended vmaster hook. - The vmaster slave mixer elements are initialized to 0dB as default so that the user won't be annoyed by the silent output after updates, e.g. due to the additions of new elements. - Other many fix-ups for the misc HD-audio devices. In the ASoC side, this is a very active release, including a quite a few framework enhancements. Some highlights: - Support for widgets not associated with a CODEC, an important part of the dynamic PCM framework. - A library factoring out the common code shared by dmaengine based DMA drivers contributed by Lars-Peter Clausen. This will save a lot of code and make it much easier to deploy enhancements to dmaengine. - Support for binary controls, used for providing runtime configuration of algorithm coefficients. - A new DAPM widget type for regulator supplies allowing drivers for devices that can power down unused supplies while active to do without any per-driver code. - DAPM widgets for DAIs, initially giving a speed boost for playback startup and shutdown and also the basis for CODEC<->CODEC DAI link support. - Support for specifying the number of significant bits on audio interfaces, useful for allowing applications to know how much effort to put into generating data for a larger sample format. - Conversion of the FSI driver used on some SH processors to DMAEngine. - Conversion of EP93xx drivers to DMAEngine. - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200. - Move audmux driver from arc/arm to sound/soc - McBSP move from arch/ to sound/ and updates Also, a few small updates and fixes for other drivers like au88x0, ymfpci, USB 6fire, USB usx2yaudio are included." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits) ASoC: wm8994: Provide VMID mode control and fix default sequence ASoC: wm8994: Add missing break in resume ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF ASoC: pxa-ssp: atomically set stream active masks ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master ASoC: Samsung: Added to support mono recording ALSA: hda - Fix build with CONFIG_PM=n ALSA: au88x0 - Avoid possible Oops at unbinding ALSA: usb-audio - Fix build error by consitification of rate list ASoC: core: Fix obscure leak of runtime array ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link() ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list ASoC: wm8996: Add 44.1kHz support ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE ASoC: mx27vis-aic32x4: Convert it to platform driver ALSA: hda - fix printing of high HDMI sample rates ALSA: ymfpci - Fix legacy registers on S3/S4 resume ALSA: control - Fixe a trailing white space error ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook() ALSA: hda - Add "Mute-LED Mode" enum control ...
2012-03-20Merge branch 'next/fixes-non-critical' into next/driversArnd Bergmann
Conflicts: arch/arm/mach-lpc32xx/clock.c arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c The conflicts with pxa are non-obvious, we have multiple branches adding and removing the same clock settings. According to Haojian Zhuang, removing the sa1100 rtc dummy clock is the correct fix here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-19Merge tag 'v3.3' into staging/for_v3.4Mauro Carvalho Chehab
* tag 'v3.3': (1646 commits) Linux 3.3 Don't limit non-nested epoll paths netfilter: ctnetlink: fix race between delete and timeout expiration ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu. nilfs2: fix NULL pointer dereference in nilfs_load_super_block() nilfs2: clamp ns_r_segments_percentage to [1, 99] afs: Remote abort can cause BUG in rxrpc code afs: Read of file returns EBADMSG C6X: remove dead code from entry.S wimax/i2400m: fix erroneous NETDEV_TX_BUSY use net/hyperv: fix erroneous NETDEV_TX_BUSY use net/usbnet: reserve headroom on rx skbs bnx2x: fix memory leak in bnx2x_init_firmware() bnx2x: fix a crash on corrupt firmware file sch_sfq: revert dont put new flow at the end of flows ipv6: fix icmp6_dst_alloc() MAINTAINERS: Add Serge as maintainer of capabilities drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode MAINTAINERS: add entry for exynos mipi display drivers MAINTAINERS: fix link to Gustavo Padovans tree ...
2012-03-13ARM: create a common IOMEM definitionRob Herring
Several platforms create IOMEM defines for casting to 'void __iomem *', and other platforms are incorrectly using __io() macro for the same purpose. This creates a common definition and removes all the platform specific versions. Rather than try to make linux/io.h and asm/io.h assembly safe, the assembly version of IOMEM is moved into asm/assembler.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-13iomux-mx25.h slew rate adjusted for LCD __LD pinsMehnert
For some reason (sadly i don't identifying the patch right now) two LCD data lines configured PAD_CTL_SRE_SLOW (wrong slew rate) since Kernel 3.1. MX25_PAD_GPIO_E__LD16 and MX25_PAD_GPIO_F__LD17 This results in an fauly behaviour and strange color effects. To ensure that all LCD data pins configured with the proper slew rate, this patch changes to IOMUX define of all LCD __LDxx pins to PAD_CTL_SRE_FAST. This problem may affect other mx25 platforms like mx25pdk. Sadly i can't test it. Of course this problem shouldn't occur when you done your LCD muxing correctly in the bootloader. Best regards, Torsten Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-06ARM: remove bunch of now unused mach/io.h filesRob Herring
Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06ARM: imx: convert to common runtime ioremap hookRob Herring
Convert i.MX platforms to use the common run-time ioremap hook instead of the imx specific hook. Also, move addr_in_module out of io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Sascha Hauer <kernel@pengutronix.de>
2012-03-06ASoC: imx: move audmux driver into sound/soc/imxShawn Guo
As audmux becomes a platform driver and its callers are all ASoC machine drivers, there is no reason to keep it in arch folder, so move it to sound/soc/imx. One bonus point would be those ASoC machine drivers stop including mach/audmux.h, since it's been moved to sound/soc/imx/imx-audmux.h. This should be a move to the right direction in terms of single kernel image goal. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-02Merge branch 'features/imx3' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into next/soc * 'features/imx3' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: mx3: Setup AIPS registers ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI Conflicts: arch/arm/mach-imx/mm-imx3.c
2012-03-02Merge branch 'features/imx27-dt' of ↵Arnd Bergmann
git://git.pengutronix.de/git/imx/linux-2.6 into next/dt * 'features/imx27-dt' of git://git.pengutronix.de/git/imx/linux-2.6: devicetree-bindings: Add documentation for i.MX generic boards ARM i.MX: Add phytec phycore-i.MX27 (aka pcm038) devicetree support ARM i.MX27: Add devicetree support
2012-03-02ARM: mx3: Setup AIPS registersFabio Estevam
It was observed on a mx31pdk board that audio playback only worked when the bootloader was Redboot, and did not work when U-boot was used. Comparing the sources of these bootloaders showed that the AIPS registers were not setup in U-boot. Instead of relying on the bootloader to setup the AIPS registers, do it in the kernel so that audio playback can work independantly of the bootloader being used. Copied the AIPS settings from Redboot to the kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-02ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFIFabio Estevam
The LPM field of register CCMR is used to select the mode that the processor will run when it goes to WFI. When mx31 enters in WFI mode the LPM field is at its reset value of 0, which configures the mx31 to enter in "wait mode". On mx35, the LPM field on mx35 is also at 0 after reset, which corresponds to "run mode" instead of "wait mode". Instead of relying on the reset value of LPM to set the low power mode for WFI, configure mx31 and mx35 to run in "wait mode" Reported-by: Benoit Thebaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29ARM i.MX27: Add devicetree supportSascha Hauer
This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-28Merge branch 'imx/driver' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/drivers * 'imx/driver' of git://git.linaro.org/people/shawnguo/linux-2.6: (3 commits) ARM: imx6q: add cko1 clock ARM: mxc: make imx_dma_is_general_purpose more generic for sdma ARM: imx6: Rename DEBUG_IMX6Q_UART to UART4
2012-02-28[media] MX2: Add platform definitions for eMMa-PrP deviceJavier Martin
eMMa-PrP device included in Freescale i.MX2 chips can also be used separately to process memory buffers. This patch provides arch glue code for the driver which provides this functionality. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-27Merge branch 'features/cs89x0' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into next/drivers * 'features/cs89x0' of git://git.pengutronix.de/git/imx/linux-2.6: CS89x0 : add CS89x0 platform device to the iMX31ADS board CS89x0 : remove QQ2440 board support from the CS89x0 driver CS89x0 : add CS89x0 platform device to the iMX21ADS board CS89x0 : add platform driver support
2012-02-27ARM: mxc: make imx_dma_is_general_purpose more generic for sdmaRichard Zhao
sdma device names vary for different SoC. So we just check whether it includes "sdma" substring. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27ARM: imx6: Rename DEBUG_IMX6Q_UART to UART4Dirk Behme
Different boards may use differenct UART ports for debugging. To be able to add different debug UART configurations (e.g. UART2), rename the existing general DEBUG_IMX6Q_UART to DEBUG_IMX6Q_UART4. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-22Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux ↵Russell King
into for-armsoc
2012-02-21ARM: remove disable_fiq and arch_ret_to_user macrosRob Herring
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-13usb: otg: ulpi: Start using struct usb_otgHeikki Krogerus
Use struct usb_otg members with OTG specific functions instead of usb_phy members. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13usb: otg: Rename otg_transceiver to usb_phyHeikki Krogerus
This is the first step in separating USB transceivers from USB OTG utilities. Includes fixes to IMX code from Sascha Hauer. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-07Merge tag 'v3.3-rc2' into depends/rmk/for-armsocOlof Johansson
There were conflicts between fixes going in after 3.3-rc1 and Russell's stable arm-soc base branch. Resolving it in the dependency branch so that each topic branch shares the same resolution. Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9g45.c
2012-02-01CS89x0 : add CS89x0 platform device to the iMX31ADS boardJaccon Bastiaansen
Add CS89x0 networking support to the iMX31ADS board by using the platform driver support in the CS89x0 driver. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-26ARM: imx: iomux-v1.h: Fix build error due to __init annotationFabio Estevam
Fix the following build error found when building imx_v4_v5_defconfig: CC arch/arm/mach-imx/mach-imx27ipcam.o In file included from arch/arm/plat-mxc/include/mach/iomux-mx27.h:23, from arch/arm/mach-imx/mach-imx27ipcam.c:22: arch/arm/plat-mxc/include/mach/iomux-v1.h:99: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'imx_iomuxv1_init' Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-20ARM: big removal of now unused arch_idle()Nicolas Pitre
When this is the only content remaining in mach/system.h then the whole file is removed. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-09Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
power management changes for omap and imx A significant part of the changes for these two platforms went into power management, so they are split out into a separate branch. * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits) ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1 ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation ARM: imx6q: resume PL310 only when CACHE_L2X0 defined ARM: imx6q: build pm code only when CONFIG_PM selected ARM: mx5: use generic irq chip pm interface for pm functions on ARM: omap: pass minimal SoC/board data for UART from dt arm/dts: Add minimal device tree support for omap2420 and omap2430 omap-serial: Add minimal device tree support omap-serial: Use default clock speed (48Mhz) if not specified omap-serial: Get rid of all pdev->id usage ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init ARM: OMAP4: PRM: use PRCM interrupt handler ARM: OMAP3: pm: use prcm chain handler ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad ARM: OMAP2+: mux: add support for PAD wakeup interrupts ARM: OMAP: PRCM: add suspend prepare / finish support ARM: OMAP: PRCM: add support for chain interrupt handler ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list ...
2012-01-09Merge branch 'samsung/cleanup' into next/boardsArnd Bergmann
Conflicts: arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-omap2/board-ti8168evm.c arch/arm/mach-s3c64xx/Kconfig arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/common.c Lots of relatively simple conflicts between the board changes and stuff from the arm tree. This pulls in the resolution from the samsung/cleanup tree, so we don't get conflicting merges. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-05Merge branch 'restart' into for-linusRussell King
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.