summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/include/mach/devices-common.h
AgeCommit message (Collapse)Author
2011-07-27dmaengine: imx-sdma: use platform_device_id to identify sdma versionShawn Guo
It might be not good to use software defined version to identify sdma device type, when hardware does not define such version. Instead, soc name is stable enough to define the device type. The patch uses platform_device_id rather than version number passed by platform data to identify sdma device type/version. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-07-27mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()Shawn Guo
The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the esdhc differences among SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Chris Ball <cjb@laptop.org>
2011-07-27net/fec: gasket needs to be enabled for some i.mxShawn Guo
On the recent i.mx (mx25/50/53), there is a gasket inside fec controller which needs to be enabled no matter phy works in MII or RMII mode. The current code enables the gasket only when phy interface is RMII. It's broken when the driver works with a MII phy. The patch uses platform_device_id to distinguish the SoCs that have the gasket and enables it on these SoCs for both MII and RMII mode. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reported-by: Troy Kisky <troy.kisky@boundarydevices.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: David S. Miller <davem@davemloft.net>
2011-07-07ARM: mxc: clean up imx-dma device registrationShawn Guo
The patch follows the implementation of gpio-mxc device registration to break the concentrated imx-dma device registration into soc specific setup function. Then we can avoid the churn of "#ifdef" and the cpu_is_mx checking on such a long list, which makes no sense, considering more soc supports need to be added and we need to support single image for multiple socs in the long run. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-06-06gpio/mxc: Change gpio-mxc into an upstanding gpio driverShawn Guo
The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-19ARM: mx3: dynamically allocate "ipu-core" devicesUwe Kleine-König
... together with the related devices "mx3_camera" and "mx3_sdc_fb". "mx3_camera" doesn't fit the scheme of the other devices that just are allocated and registered in a single function because it needs additional care to get some dmaable memory. So currently imx31_alloc_mx3_camera duplicates most of imx_add_platform_device_dmamask, but I'm not sure it's worth to split the latter to be able to reuse more code. This gets rid of mach-mx3/devices.[ch] and so several files need to be adapted not to #include devices.h anymore. LAKML-Reference: 1299271882-2130-5-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: mx3: dynamically allocate "mxc_rtc" devicesUwe Kleine-König
LAKML-Reference: 1299271882-2130-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-07ARM: mx5: add support for the two watchdog modulesFabio Estevam
MX51 has two watchdog modules. Add support for both of them. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-19ARM: imx: fix name for functions adding sdhci-esdhc-imx devicesUwe Kleine-König
and restore alphabetic ordering. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically register mxc-mmc devicesUwe Kleine-König
Compared to the static devices the dynamic have a DMA resource. This should be save as it seems unused in the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx25: dynamically allocate imx2-wdt devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocatate imx-fb devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate imxdi_rtc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate imx-keypad devicesUwe Kleine-König
The mxc-keypad device seems to be the result of an early and partial merge of the keypad driver. It's unused and there is no corresponding driver available, so just remove it. Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate mxc_pwm devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx21-hcd devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx-keypad devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc-ehci devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically register mxc-mmc devicesUwe Kleine-König
... plus a trivial simplification of mx21ads_sdhc_init() Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc_pwm devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically register imx-fb devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: change the way flexcan devices are registeredUwe Kleine-König
Group soc specific data in a global struct instead of repeating it for each call to imxXX_add_flexcanX. The structs holding the actual data are placed in .init.constdata and so don't do much harm. Compared to the previous approach this reduces code size to call imx_add_flexcan. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx2-wdt devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes and for consistency NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mx2-camera deviceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mx1-camera deviceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: allow specifying a dma mask when creating a platform deviceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx_udc deviceUwe Kleine-König
This is only available for mx1 machines with no in-tree user. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc_w1 devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-10-26ARM: imx: Add gpio-keys to plat-mxcDinh Nguyen
Add imx_add_gpio_keys function to add gpio-keys in plat-mxc Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-19imx-esdhc: update devices registrationEric Bénard
Tested on i.MX25 and i.MX35 and i.MX51 Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-11ARM: imx: dynamically register fec devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11arm: imx: add generic esdhc deviceWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: dynamically register mxc-nand deviceSascha Hauer
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: reorganize nand registration to use a structUwe Kleine-König
Addiontionally make the interrupt #defines match the base address defines MX.._NFC_BASE_ADDR. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: use platform ids for spi_imx devicesUwe Kleine-König
The driver recently learned to handle platform ids. Make use of this new feature. The up side is that the driver needs less knowledge about the spi interfaces used on different SoCs. Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-09-27ARM: imx: reorganize imx-i2c device registration to use a struct per SoCUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27ARM: imx: dynamically allocate imx-ssi devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27ARM: imx: change the way imx-uarts are registeredUwe Kleine-König
For mx1_defconfig this yields: add/remove: 1/0 grow/shrink: 1/4 up/down: 49/-108 (-59) function old new delta imx1_imx_uart_data - 48 +48 kernel_config_data 7277 7278 +1 imx_add_imx_uart_1irq 132 128 -4 imx_add_imx_uart_3irq 164 156 -8 scb9328_init 96 64 -32 mx1ads_init 220 156 -64 for mx21_defconfig this yields: add/remove: 1/0 grow/shrink: 0/3 up/down: 64/-52 (12) function old new delta imx21_imx_uart_data - 64 +64 imx_add_imx_uart_3irq 160 156 -4 imx_add_imx_uart_1irq 140 136 -4 mx21ads_board_init 220 176 -44 for a random mx25 config this yields: add/remove: 1/0 grow/shrink: 0/5 up/down: 80/-56 (24) function old new delta imx25_imx_uart_data - 80 +80 imx_add_imx_uart_3irq 160 156 -4 imx_add_imx_uart_1irq 140 136 -4 mx25pdk_init 288 272 -16 eukrea_mbimxsd_baseboard_init 272 256 -16 eukrea_cpuimx25_init 252 236 -16 for mx27_defconfig this yields: add/remove: 1/0 grow/shrink: 0/10 up/down: 96/-280 (-184) function old new delta imx27_imx_uart_data - 96 +96 imx_add_imx_uart_3irq 160 156 -4 imx_add_imx_uart_1irq 140 136 -4 pca100_init 560 544 -16 mx27pdk_init 112 96 -16 mx27lite_init 92 76 -16 eukrea_cpuimx27_init 332 316 -16 pcm038_init 388 348 -40 mxt_td60_board_init 320 280 -40 eukrea_mbimx27_baseboard_init 476 436 -40 mx27ads_board_init 368 280 -88 and finally for mx3_defconfig: add/remove: 2/0 grow/shrink: 0/9 up/down: 128/-344 (-216) function old new delta imx31_imx_uart_data - 80 +80 imx35_imx_uart_data - 48 +48 imx_add_imx_uart_1irq 132 128 -4 imx_add_imx_uart_3irq 164 152 -12 mx31moboard_devboard_init 360 344 -16 mx31lite_db_init 176 160 -16 mx31moboard_smartbot_init 384 360 -24 kzm_board_init 232 208 -24 armadillo5x0_init 392 364 -28 mx31lilly_db_init 248 208 -40 mxc_board_init 3760 3580 -180 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27ARM: imx: change the way spi-imx devices are registeredUwe Kleine-König
Group soc specific data in a global struct instead of repeating it for each call to imxXX_add_spi_imxX. The structs holding the actual data are placed in .init.constdata and so don't do much harm. Compared to the previous approach this reduces code size to call imx_add_spi_imx. Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-27ARM: imx: remove #ifdefery for unmerged flexcan driverUwe Kleine-König
The flexcan driver was merged as e955cead. Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-26imx: dynamically register flexcan devices for mx25 and mx35Marc Kleine-Budde
In order to make this patch compile, even if the flexcan driver with it's header defining the platform data isn't merged yet, two ifdefs have been added. They effect that the "imx_add_flexcan" function results in a no-op function if the driver hasn't been activated. These ifdefs can be removed after the flexcan driver has been merged. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-uart devices (generic part)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register spi_imx devices (generic part)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-i2c devices (generic part)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: Change the way nand devices are registered (generic part)Uwe Kleine-König
Instead of having a platform device defined in a devices.c and register it in the machine file allocate it dynamically. This reduces the size of needed memory as the new function is discarded after init and only the existing devices are created. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: new helper function imx_add_platform_deviceUwe Kleine-König
This should be a globally available function, see http://thread.gmane.org/gmane.linux.kernel/998881/focus=998882 Until this hits mainline create a similar function available for imx platforms only. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-05 03:40:51 +0000