summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-15mac80211: let key iteration get keys in install orderJohannes Berg
ieee80211_iter_keys() currently returns keys in the backward order they were installed in, which is a bit confusing. Add them to the tail of the key list to make sure iterations go in the same order that keys were originally installed in. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15mac80211: allow driver access to TKIP RX P1KJohannes Berg
When the driver wants to pre-program the TKIP RX phase 1 key, it needs to be able to obtain it for the peer's TA. Add API to allow it to generate it. The generation uses a dummy on-stack context since it doesn't know the RX queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15ath9k: improve reliability of MIC error detectionFelix Fietkau
For unicast the hardware sometimes reports MIC errors even though the frame that it received actually contains a valid MIC - on some chips this can happen frequently enough to trigger TKIP countermeasures. Fix this issue by not reporting MIC errors for unicast frames with a valid key, letting mac80211 validate the MIC instead. Additionally, strip the MIC for all frames that the hardware considers valid to avoid wasting CPU cycles re-validating it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15orinoco: minor fixes for problems found by checkpatch.plPavel Roskin
Eliminate spaces before tabs. Eliminate typedefs. Add spaces around operators. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15mwl8k: Fixing sta dereference when ieee80211_tx_info->control.sta is NULLYogesh Ashok Powar
Following oops was seen on SMP machine >BUG: unable to handle kernel NULL pointer dereference at 00000012 >IP: [<f8c56691>] mwl8k_tx+0x20e/0x561 [mwl8k] >*pde = 00000000 >Oops: 0000 [#1] SMP >Modules linked in: mwl8k mac80211 cfg80211 [last unloaded: cfg80211] As ieee80211_tx_info->control.sta may be NULL during ->tx call, avoiding sta dereference in such scenario with the following patch. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15nl80211/cfg80211: add max_sched_scan_ie_len in the hw descriptionLuciano Coelho
Some chips may support different lengths of user-supplied IEs with a single scheduled scan command than with a single normal scan command. To support this, this patch creates a separate hardware description element that describes the maximum size of user-supplied information element data supported in scheduled scans. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15nl80211/cfg80211: add max_sched_scan_ssids in the hw descriptionLuciano Coelho
Some chips can scan more SSIDs with a single scheduled scan command than with a single normal scan command (eg. wl12xx chips). To support this, this patch creates a separate hardware description element that describes the amount of SSIDs supported in scheduled scans. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15nl80211: advertise GTK rekey support, new triggersJohannes Berg
Since we now have the necessary API in place to support GTK rekeying, applications will need to know whether it is supported by a device. Add a pseudo-trigger that is used only to advertise that capability. Also, add some new triggers that match what iwlagn devices can do. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13mac80211: allow driver to disconnect after resumeJohannes Berg
In WoWLAN, devices may use crypto keys for TX/RX and could also implement GTK rekeying. If the driver isn't able to retrieve replay counters and similar information from the device upon resume, or if the device isn't responsive due to platform issues, it isn't safe to keep the connection up as GTK rekey messages from during the sleep time could be replayed against it. The only protection against that is disconnecting from the AP. Modifying mac80211 to do that while it is resuming would be very complex and invasive in the case that the driver requires a reconfig, so do it after it has resumed completely. In that case, however, packets might be replayed since it can then only happen after TX/RX are up again, so mark keys for interfaces that need to disconnect as "tainted" and drop all packets that are sent or received with those keys. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13mac80211: remove a redundant checkMohammed Shafi Shajakhan
is_valid_ether_addr itself checks for is_zero_ether_addr Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13mwifiex: add cfg80211 handler for set_bitrate_maskYogesh Ashok Powar
Currently, setting only legacy bitrates on 2.4GHz band are supported. Mode 802.11b/g/bg is enabled based on bitrates selection. If only CCK bitrates selected then 802.11b mode is enabled. If only OFDM bitrates are selected then 802.11g mode is enabled. For both: CCK and OFDM rates 802.11bg mixed mode is enabled. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: do not call ieee80211_stop_queue for queues not managed by mac80211Felix Fietkau
Instead of using ieee80211_stop_queue, check the configured tx queue limit before calling ieee80211_get_buffered_bc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: disable 32KHz sleep clock operation by defaultFelix Fietkau
While 32 KHz sleep clock might provide some power saving benefits, it is also a major source of stability issues, on OpenWrt it produced some reproducible data bus errors on register accesses on several different MIPS platforms. All the Atheros drivers that I can find do not enable this feature, so it makes sense to leave it disabled in ath5k as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: fix reference clock usec duration setting restoreFelix Fietkau
enabling the sleep clock alters the AR5K_USEC_32 field, but disabling it didn't restore it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: delay full calibration after resetFelix Fietkau
During scans the full calibration usually does not make much sense, PAPD probing and IQ calibration should be deferred until there is enough time to complete them. Adding 100 ms to the initial full calibration delay should be enough to do this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: initialize common->clockrateFelix Fietkau
Fixes a division by zero when setting distance before activating the device for the first time. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: fix reference clock frequency for spur mitigation on AR2413Felix Fietkau
AR2413 uses the same reference clock as AR5413 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: apply the synth voltage tweak only on AR5112 rev 2Felix Fietkau
Might fix some stability issues on newer chips Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: add missing checks for rfgain probeFelix Fietkau
rfgain probe is only necessary for OFDM operation on AR5111 and AR5112. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath9k_hw: Fix incorrect key_miss handlingSenthil Balasubramanian
Decryping frames on key_miss handling shouldn't be done for Michael MIC failed frames as h/w would have already decrypted such frames successfully anyway. Also leaving CRC and PHY error(where the frame is going to be dropped anyway), we are left to prcoess Decrypt error for which s/w decrypt is selected anway and so having key_miss as a separate check doesn't serve anything. So making key_miss handling mutually exlusive with other RX status handling makes much more sense. This patch addresses an issue with STA not reporting MIC failure events resulting in STA being disconnected immediately. Cc: stable@kernel.org Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13iwlagn: Add missing comma between constant string arrayJoe Perches
Multiple quoted strings are concatenated without comma separators. Make the array const while there. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13iwlegacy: Add missing comma between constant string arrayJoe Perches
Multiple quoted strings are concatenated without comma separators. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: fix warning in testmode attribute tableWey-Yi Guy
Fix the compile warning cause by [IWL_TM_ATTR_MAX - 1] Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k: remove an unnecessary function declarationMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11rt2800usb: Add new device ID for BelkinEduardo Bacchi Kienetz
Belkin's Connect N150 Wireless USB Adapter, model F7D1101 version 2, uses ID 0x945b. Chipset info: rt: 3390, rf: 000b, rev: 3213. I have just bought one, which started to work perfectly after the ID was added through this patch. Signed-off-by: Eduardo Bacchi Kienetz <eduardo@kienetz.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: Add missing breaks in switch/caseJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11rtlwifi: rtl8192cu: Fix duplicate if testLarry Finger
A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the same condition twice. The problem was found using cppcheck-1.49, and the proper fix was verified against the pre-mac80211 version of the code. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@kernel.org> [back to 2.6.39] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11libertas: fix handling of command timeout, completion and interruptionDaniel Drake
When commands time out, corruption ensues. As lbs_complete_command() is called without locking, the command node is mistakenly freed twice. Also fixed up locking here in a few other places. The nature of command timeout may be that the card didn't even acknowledge receipt of the request. Detect this case and reset dnld_sent so that other commands don't hang forever. When cmdnodes are moved between the free list and the pending list, their list heads should be reinitialized. Fixed this. Sometimes commands are completed without actually submitting them or removing them from cmdpendingq. We must remember to remove them from cmdpendingq in these cases, so handle this in lbs_complete_command(). Harmless signals generated during suspend/resume were interrupting lbs_cmd. Convert to an uninterruptible sleep to avoid this. lbs_thread must be woken up every time there is some new work to do. I found that when 2 commands are queued, ther completion of the first command would not wake up lbs_thread to submit the second. Poke lbs_thread at the end of lbs_complete_command() to fix this. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11mac80211: allocate only one RX queueJohannes Berg
We don't have multiple RX queues, so there's no use in allocating multiple, use alloc_netdev_mqs() to allocate multiple TX but only one RX queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11mac80211: fix docbookJohannes Berg
I changed the TKIP key functions, but forgot to update the documentation includes, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11cfg80211: fix docbookJohannes Berg
Looks like I forgot to document the "gfp" parameter to cfg80211_gtk_rekey_notify, add it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11bcma: add check if sprom is available before accessing it.Hauke Mehrtens
The SoCs like the bcm4716 do not have a sprom on the bcma bus like a pcie device. It stores the values in some partition on flash memory. For ssb this informations are read out in the bcm47xx arch code, something like that should also be implemented for bcma. Without this patch bcma panics on SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11libertas: fix errors in functions accessing module registersOlivier Sobrie
Problems located in the two functions lbs_set_reg() and lbs_get_reg(): - The offset field of struct cmd_ds_reg_access was not filled in - The test on the return code of lbs_cmd_with_response() in function lbs_get_reg() was inverted Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: fix typos, bad comment formatting and GHz in place of MHzPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: validate mode in ath5k_ani_init() before trying to set itPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: add a missing delay for an analog registerFelix Fietkau
AR_AN_SYNTH9 is in the analog shift register range and thus needs to be written using the ath9k_hw_analog_shift_rmw function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: fix synth delay for half/quarter channelsFelix Fietkau
The radio needs twice / four times as much time to stabilize for half/quarter channels. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: set 5 GHz half/quarter channels on AR9002 using fractional modeFelix Fietkau
The radio seems to perform better that way Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: remove ar9287 v1.3+ specific hardcoded register hacksFelix Fietkau
Now that the clock rate is initialized properly and SIFS, EIFS, USEC, slot time and ACK timeout are properly calculated by the generic code, the 'async FIFO' register hacks are no longer necessary. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: initialize more timing related registers for half/quarter channelsFelix Fietkau
Initialize the the clock-to-TSF field of AR_USEC and the SIFS and EIFS time registers based on the clock rate instead of relying on initvals. With those changes, some of the hardcoded AR9287 1.3+ specific overrides can be dropped. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: fix MAC clock rate for AR9287 v1.3+Felix Fietkau
This chip uses the async FIFO feature and runs the MAC at 117 MHz Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: fix MAC clock for half/quarter rateFelix Fietkau
Enabling half/quarter rate makes the MAC run at half/quarter clock speed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: always enable 5 GHz fast clock for AR9280Felix Fietkau
All devices support this, but some disable it using an EEPROM flag for some reason. Improves 5 GHz performance on those devices. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: remove hardcoded PLL overrides for AR9280Felix Fietkau
Use the proper masks for the register instead. Fixes adding the (still unused) half/quarter PLL flags. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11mwifiex: 11n specific configuration for transmitAmitkumar Karwar
Currently device is not able to transmit in 40MHz in spite of enabling 40MHz support in HTCapInfo IE in assoc req, because 11n specific FW capabilities for transmission are not initialized. This patch adds code to initilize these capabilities. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove iwlagn_hcmd_utils structure and call directlyDon Fry
Not needed since the driver split. Move single use routines to calling location and keep static where possible. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: separate and enhance the fixed rate fromWey-Yi Guy
For testing purpose, we need better control of msc from user application. Separate the fixed_rate between debugfs and testmode and enforce it. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: block regular host commands if driver don't own uCodeWey-Yi Guy
The only host command allow to send to uCode is the one initiated from testmode if testmode is the owner of uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: allow application own the uCode operationWey-Yi Guy
Since we open the door to allow application control the device behavior through testmode, add command to allow application request the ownership of the uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: add CMD_ON_DEMAND flag for host command from testmodeWey-Yi Guy
For all the hist command request from testmode, set the CMD_ON_DEMAND flag. this flag will be used later to control the uCode behavior Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 00:45:59 +0000