summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-11media: vicodec: improve handling of ENC_CMD_STOP/STARTHans Verkuil
Correctly handle stopping and restarting the encoder, keeping track of the stop and drain states. In addition it adds correct handling of corner cases, allowing v4l2-compliance to pass. Unfortunately, the code is getting to be quite complicated, so we need to work on better codec support in v4l2-mem2mem.c to simplify drivers. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: stateless codecs do not have EOS and SOURCE_CHANGE eventsHans Verkuil
Return an error when attempting to subscribe to those events for a stateless codec. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: use correct sizeimage value when drainingHans Verkuil
After a resolution change is detected, q_data->sizeimage is updated to the new format, but buf_prepare is still draining buffers that need to use the old pre-resolution-change value. So store the sizeimage value in q_data->vb2_sizeimage in queue_setup and use that in buf_prepare. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: set KEY/PFRAME flag when decodingHans Verkuil
Set V4L2_BUF_FLAG_P/KEYFRAME after decoding a frame. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_OUTPUTHans Verkuil
The stateful encoder requires the presence of this control. Since a single buffer is sufficient for vicodec, we just set this control to 1. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: pass on enc output format to capture sideHans Verkuil
Setting the encoder output format to e.g. 1920x1080 will set the crop rectangle to 1920x1088, the coded resolution to 1920x1088 and the capture coded resolution and sizeimage to 1920x1088 as well. Note that this might change, since the encoder spec is still in flux with respect to how this should behave. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: fix initial stateless sizeimage valueHans Verkuil
The initial sizeimage value was wrong for the stateless decoder. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: always return a valid format.Hans Verkuil
Rather than returning width/height values of 0, just default to a format. Formats in V4L2 are always supposed to be valid, there is no concept of an invalid format. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: vicodec: move v4l2_ctrl_request_complete after spin_unlockHans Verkuil
v4l2_ctrl_request_complete can sleep, so can't be called while a spinlock is held. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: MAINTAINERS: Add meson video decoderMaxime Jourdan
Add an entry for the meson video decoder for amlogic SoCs. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: meson: add v4l2 m2m video decoder driverMaxime Jourdan
Amlogic SoCs feature a powerful video decoder unit able to decode many formats, with a performance of usually up to 4k60. This is a driver for this IP that is based around the v4l2 m2m framework. It features decoding for: - MPEG 1 - MPEG 2 Supported SoCs are: GXBB (S905), GXL (S905X/W/D), GXM (S912) There is also a hardware bitstream parser (ESPARSER) that is handled here. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-11media: dt-bindings: media: add Amlogic Video Decoder BindingsMaxime Jourdan
Add documentation for the meson vdec dts node. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-10media: ttpci: use rc-core for the IR receiverSean Young
The IR protocol can now only be set via the rc protocols sysfs file rather than via module parameters or a custom procfs file. So, it is no longer necessary to periodically check for protocol changes. The IR_RCMM protocol does not decode the Philips RC-MM protocol (12, 24 or 32 bit variants) or any protocol rc-core can encode, so this is marked RC_PROTO_UNKNOWN. Tested on Technotrend/Hauppauge WinTV Nexus-S rev2.1, which comes with a small black hauppauge remote. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-10media: stv090x: Implement probe/remove for stv090xTobias Klausmann
Move common code into a new function. This provides the needed functionality to use dvb_module_probe() instead of dvb_attach()! [mchehab+samsung@kernel.org: fix an out of order error return code] Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-10media: stv6110x: Implement probe/remove for stv6110xTobias Klausmann
Refactor out the common parts of stv6110x_probe() and stv6110x_attach() into separate functions. This provides the needed functionality to use dvb_module_probe() instead of dvb_attach()! Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-10media: Revert "media: staging/imx: Allow driver to build if COMPILE_TEST is ↵Fabio Estevam
enabled" Commit 020bc7354a6e ("media: staging/imx: Allow driver to build if COMPILE_TEST is enabled") incorrectly assumed that the imx media driver had no build time dependency with IMX_IPUV3_CORE. Building on x86_64 without IMX_IPUV3_CORE causes lots of build errors such as: All these definitions come from the imx ipu3 core driver, so make sure that imx media depends on IMX_IPUV3_CORE. This reverts commit 020bc7354a6ebec980e0aedf5bedf57b42f93aca. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-10media: v4l2: Fix the _MPLANE format check in v4l_enum_fmt()Boris Brezillon
CAP_M2M_MPLANE means the device supports _MPLANE formats for both capture and output. Adjust the check to avoid EINVAL errors on such devices. Reported-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: MAINTAINERS: update email addressHans Verkuil
Use hverkuil-cisco@xs4all.nl instead of hans.verkuil@cisco.com. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: Documentation: update email addressHans Verkuil
Use hverkuil-cisco@xs4all.nl instead of hans.verkuil@cisco.com. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: pvrusb2: fix null-ptr-deref in class_unregister()Kefeng Wang
The class_ptr will be NULL if pvr2_sysfs_class_create() fails in pvr_init(), when call pvr2_sysfs_class_destroy(), it will lead to null-ptr-deref, fix it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: platform: ao-cec-g12a: remove spin_lock_irqsave() locking in ↵Neil Armstrong
meson_ao_cec_g12a_read/write Since locking is handled by regmap, the spin_lock_irqsave() in the meson_ao_cec_g12a_read/write() regmap callbacks is not needed. Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: imx7-media-csi: Remove unneeded error messageFabio Estevam
In case of ioremap failure, the core code will take care of printing the error message, so there is no need for having a local error message in the driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: imx7-media-csi: Use u32 for storing register readsFabio Estevam
The CSI registers are 32-bit, so using u32 type is more suitable for storing the values from register reads. Switch from 'unsigned long' to 'u32' type. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: imx7-media-csi: Use functions instead of macrosFabio Estevam
Currently there is a macro for reading and another macro for writing to the CSI registers. Functions can do parameter type checking, which leads to a safer code, so switch from macro to function implementation. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: use different delays for triggering VE H/W resetJae Hyun Yoo
In case of watchdog timeout detected while doing mode detection, it's better triggering video engine hardware reset immediately so this commit fixes code for the case. Other than the case, it will trigger video engine hardware reset after RESOLUTION_CHANGE_DELAY. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: remove source buffer allocation before mode detectionJae Hyun Yoo
Mode detection doesn't require source buffer allocation so this commit removes that. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: refine interrupt handling logicJae Hyun Yoo
There are cases that interrupt bits are cleared by a 500ms delayed work which causes unnecessary irq calls. Also, the current interrupt handler returns IRQ_HANDLED always but it should return IRQ_NONE if there is any unhandled interrupt. So this commit refines the interrupt handling logic to fix these issues. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETEJae Hyun Yoo
VE_INTERRUPT_CAPTURE_COMPLETE and VE_INTERRUPT_COMP_COMPLETE are not set at the same time but the current interrupt handling mechanism of this driver doesn't clear the interrupt flag until both two are set, and this behavior causes unnecessary interrupt handler calls. In fact, this driver provides JPEG format only so taking care of the VE_INTERRUPT_COMP_COMPLETE is enough for getting compressed image frame so this commit gets rid of the VE_INTERRUPT_CAPTURE_COMPLETE checking logic to simplify the logic. Handling of VE_INTERRUPT_CAPTURE_COMPLETE could be added back later when it's actually needed. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: reduce noisy log printing outsJae Hyun Yoo
Currently, this driver prints out too much log messages when a mode change happens, video turned off by screen saver and etc. Actually, all cases are reported to user space properly. Also, these are not critical errors but recoverable things, so this commit changes the log level of some noisy printing outs. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: remove IRQF_SHARED flagJae Hyun Yoo
Video Engine has a dedicated interrupt line so this driver doesn't need to use IRQF_SHARED flag so remove it. Also, it'd be good for following what Thomas recommended in the IRQF_ONESHOT support patch like below: "Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms." Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: change irq to threaded irqJae Hyun Yoo
Differently from other Aspeed drivers, this driver calls clock control APIs in interrupt context. Since ECLK is coupled with a reset bit in clk-aspeed module, aspeed_clk_enable will make 10ms of busy waiting delay for triggering the reset and it will eventually disturb other drivers' interrupt handling. To fix this issue, this commit changes this driver's irq to threaded irq so that the delay can be happened in a thread context. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: refine clock control logicJae Hyun Yoo
Currently, this driver calls clk_prepare and clk_unprepare from interrupt context too but these should be called from sleepable context only. To fix this issue, this commit splits out clk_enable/disable and clk_prepare/unprepare, and it places clk_prepare/unprepare calls into the module probe/remove function. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: aspeed: fix a kernel warning on clk controlJae Hyun Yoo
Video engine clock control can be double disabled and eventually it causes a kernel warning with stack dump printing out like below: [ 515.540498] ------------[ cut here ]------------ [ 515.545174] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:684 clk_core_unprepare+0x13c/0x170 [ 515.553806] vclk-gate already unprepared [ 515.557841] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G W 5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1 [ 515.568973] Hardware name: Generic DT based system [ 515.573777] Backtrace: [ 515.576272] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24) [ 515.583930] r7:803a5614 r6:00000009 r5:00000000 r4:9d88fe1c [ 515.589712] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28) [ 515.597053] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc) [ 515.604557] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90) [ 515.612734] r6:000002ac r5:8080befc r4:80a07008 [ 515.617463] [<80116070>] (warn_slowpath_fmt) from [<803a5614>] (clk_core_unprepare+0x13c/0x170) [ 515.626167] r3:8080cdf4 r2:8080bfc0 [ 515.629834] r7:98d682a8 r6:9d8a9200 r5:9e5151a0 r4:97abd620 [ 515.635530] [<803a54d8>] (clk_core_unprepare) from [<803a76a4>] (clk_unprepare+0x34/0x3c) [ 515.643812] r5:9e5151a0 r4:97abd620 [ 515.647529] [<803a7670>] (clk_unprepare) from [<804f36ec>] (aspeed_video_off+0x38/0x50) [ 515.655539] r5:9e5151a0 r4:9e504000 [ 515.659242] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114) [ 515.668036] r5:9e5044b0 r4:9e504000 [ 515.671643] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8) [ 515.679999] r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318 [ 515.685695] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4) [ 515.692914] r5:9e51b608 r4:9d8a9200 [ 515.696597] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c) [ 515.703315] r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc [ 515.711167] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0) [ 515.718596] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578) [ 515.726777] r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000 [ 515.732466] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20) [ 515.740727] Exception stack(0x9d88ffb0 to 0x9d88fff8) [ 515.745840] ffa0: 00000000 76f18094 00000000 00000000 [ 515.754122] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000 [ 515.762386] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007 [ 515.769097] r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778 [ 515.777006] r4:00000007 [ 515.779558] ---[ end trace 12c04aadef8afbbb ]--- [ 515.784176] ------------[ cut here ]------------ [ 515.788817] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:825 clk_core_disable+0x18c/0x204 [ 515.797161] eclk-gate already disabled [ 515.800916] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G W 5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1 [ 515.811945] Hardware name: Generic DT based system [ 515.816730] Backtrace: [ 515.819210] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24) [ 515.826782] r7:803a5900 r6:00000009 r5:00000000 r4:9d88fe04 [ 515.832454] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28) [ 515.839687] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc) [ 515.847170] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90) [ 515.855247] r6:00000339 r5:8080befc r4:80a07008 [ 515.859868] [<80116070>] (warn_slowpath_fmt) from [<803a5900>] (clk_core_disable+0x18c/0x204) [ 515.868385] r3:8080cdd0 r2:8080c00c [ 515.871957] r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:97abd560 [ 515.877615] [<803a5774>] (clk_core_disable) from [<803a59a0>] (clk_core_disable_lock+0x28/0x34) [ 515.886301] r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:a0000013 [ 515.891960] [<803a5978>] (clk_core_disable_lock) from [<803a7714>] (clk_disable+0x2c/0x30) [ 515.900216] r5:9e5151a0 r4:9e515f60 [ 515.903816] [<803a76e8>] (clk_disable) from [<804f36f8>] (aspeed_video_off+0x44/0x50) [ 515.911656] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114) [ 515.920341] r5:9e5044b0 r4:9e504000 [ 515.923921] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8) [ 515.932184] r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318 [ 515.937851] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4) [ 515.944980] r5:9e51b608 r4:9d8a9200 [ 515.948559] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c) [ 515.955257] r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc [ 515.963008] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0) [ 515.970333] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578) [ 515.978421] r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000 [ 515.984086] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20) [ 515.992247] Exception stack(0x9d88ffb0 to 0x9d88fff8) [ 515.997296] ffa0: 00000000 76f18094 00000000 00000000 [ 516.005473] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000 [ 516.013642] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007 [ 516.020257] r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778 [ 516.028072] r4:00000007 [ 516.030606] ---[ end trace 12c04aadef8afbbc ]--- To prevent this issue, this commit adds clock status checking logic into the Aspeed video engine driver. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: stm32-dcmi: fix irq = 0 caseFabien Dessenne
Manage the irq = 0 case, where we shall return an error. Fixes: b5b5a27bee58 ("media: stm32-dcmi: return appropriate error codes during probe") Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reported-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: cxusb: Revert "media: cxusb: add raw mode support for, Medion MD95700"Hans Verkuil
This patch shouldn't have been included in the pull request as it adds a non-standard raw mode that is for debugging only. So revert commit ead14a70754f8d7f5dbcb0553c7f11eb0fc4a6ac. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: platform: Fix Warning of Unneeded Semicolon reported by coccicheckShobhit Kukreti
fixed the warning in the files below drivers/media/platform/pxa_camera.c:1391:2-3: Unneeded semicolon drivers/media/platform/qcom/venus/vdec_ctrls.c:78:2-3: Unneeded semicolon drivers/media/platform/sti/c8sectpfe/c8sectpfe-dvb.c:146:3-4: Unneeded semicolon Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: vivid: fix incorrect assignment operation when setting video modeColin Ian King
The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment, otherwise the previous clearing of the FB_VMODE_MASK bits of var->vmode makes no sense and is redundant. Addresses-Coverity: ("Unused value") Fixes: ad4e02d5081d ("[media] vivid: add a simple framebuffer device for overlay testing") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: mtk-vcodec: support single-buffer framesYunfei Dong
MT8183 will use a multi-planar format backed by a single buffer. Adapt the existing code to be able to handle such frames instead of assuming each frame is backed by two buffers. Co-developed-by: Alexandre Courbot <acourbot@chromium.org> [acourbot: refactor, cleanup and split] Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix checkpatch alignment warning] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: mtk-vcodec: constify formatsAlexandre Courbot
Formats are read-only internal memory structures, so make them const. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: mtk-vcodec: replace GPLv2 with SPDXAlexandre Courbot
Replace the GPLv2 boilerplate with the corresponding SPDX reference. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: imx7-mipi-csis: Remove extra blank lineFabio Estevam
Checkpatch reports an extra blank line, so remove such unneeded line. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: imx7-mipi-csis: Remove unneeded 'ret' initializationFabio Estevam
There is no need for initializing the 'ret' variable as it will be assigned at: ret = mipi_csis_parse_dt(pdev, state); Remove the unneeded initialization. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: imx7-mipi-csis: Propagate the error if clock enabling failsFabio Estevam
Currently the return value from clk_bulk_prepare_enable() is checked, but it is not propagate it in the case of failure. Fix it and also move the error message to the caller of mipi_csis_clk_enable(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: vimc: Remove or modify stream checksAndré Almeida
Change the way subdevices check if the stream is running. Verify the stream pointer instead of src_frame. This makes easier to get rid of the void* and u8* that points to frames in the subdevices structs. Remove checks that s_stream does on subdevices. They are redundant since the Media Controller Framework doesn't allow two streaming on the same media pipeline at the same time. Signed-off-by: André Almeida <andrealmeid@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: media/doc: Allow sizeimage to be set by v4l clientsStanimir Varbanov
This changes v4l2_pix_format and v4l2_plane_pix_format sizeimage field description to allow v4l clients to set bigger image size in case of variable length compressed data. Presently s5p-mfc and mtk-vcodec codec drivers use that. Lets make it obvious in the documentation. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: docs: fix minor typosMarc Gonzalez
Fix minor typos in the DVB demux documentation. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: dvb: tag deprecated DVB APIs as suchMauro Carvalho Chehab
There are three headers at DVB that should not be used on future projects: audio.h, osd.h and video.h. While this is already clear at the docs, make clear also at the headers that those files should not be used on future drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: do not use C++ style comments in uapi headersMasahiro Yamada
Linux kernel tolerates C++ style comments these days. Actually, the SPDX License tags for .c files start with //. On the other hand, uapi headers are written in more strict C, where the C++ comment style is forbidden. [mchehab+samsung@kernel.org: fix a checkpatch --strict warning] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: vicodec: use new v4l2_m2m_ioctl_try_en/decoder_cmd funcsHans Verkuil
Use the new helper functions for the try_de/decoder_cmd ioctls. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: v4l2-mem2mem: add try_en/decoder_cmd ioctl helpersHans Verkuil
Most if not all codecs will need to implement these ioctls and it is expected to be the same for all codecs. So add this to the core v4l2-mem2mem framework so that this code can easily be reused. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-20 03:53:15 +0000