diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/pinctrl/at91.h | 5 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/rockchip.h | 2 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 2 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinmux.h | 7 |
4 files changed, 11 insertions, 5 deletions
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index 0fee6ff77ffc..bbca3d038900 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -20,6 +20,11 @@ #define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH) +#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT (0x0 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_LOW (0x1 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) + #define AT91_PIOA 0 #define AT91_PIOB 1 #define AT91_PIOC 2 diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h index cd5788be82ce..743e66a95e13 100644 --- a/include/dt-bindings/pinctrl/rockchip.h +++ b/include/dt-bindings/pinctrl/rockchip.h @@ -28,5 +28,7 @@ #define RK_FUNC_GPIO 0 #define RK_FUNC_1 1 #define RK_FUNC_2 2 +#define RK_FUNC_3 3 +#define RK_FUNC_4 4 #endif diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index a15f10727eb8..d578a60eff23 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -57,7 +57,7 @@ * which are then pulled up with an external resistor. Setting this * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Setting this config will enable open drain mode, the + * (open emitter). Setting this config will enable open source mode, the * argument is ignored. * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current * passed as argument. The argument is in mA. diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index 3097aafbeb24..511bda9ed4bf 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -39,13 +39,12 @@ struct pinctrl_dev; * name can be used with the generic @pinctrl_ops to retrieve the * actual pins affected. The applicable groups will be returned in * @groups and the number of groups in @num_groups - * @enable: enable a certain muxing function with a certain pin group. The + * @set_mux: enable a certain muxing function with a certain pin group. The * driver does not need to figure out whether enabling this function * conflicts some other use of the pins in that group, such collisions * are handled by the pinmux subsystem. The @func_selector selects a * certain function whereas @group_selector selects a certain set of pins * to be used. On simple controllers the latter argument may be ignored - * @disable: disable a certain muxing selector with a certain pin group * @gpio_request_enable: requests and enables GPIO on a certain pin. * Implement this only if you can mux every pin individually as GPIO. The * affected GPIO range is passed along with an offset(pin number) into that @@ -68,8 +67,8 @@ struct pinmux_ops { unsigned selector, const char * const **groups, unsigned * const num_groups); - int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector, - unsigned group_selector); + int (*set_mux) (struct pinctrl_dev *pctldev, unsigned func_selector, + unsigned group_selector); int (*gpio_request_enable) (struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset); |