summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h74
1 files changed, 28 insertions, 46 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index abb3b1a9ddc9..fe1a3a603375 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -19,7 +19,6 @@
#include <linux/wireless.h>
#include <linux/device.h>
#include <linux/ieee80211.h>
-#include <linux/inetdevice.h>
#include <net/cfg80211.h>
/**
@@ -147,6 +146,7 @@ struct ieee80211_low_level_stats {
* enabled/disabled (beaconing modes)
* @BSS_CHANGED_CQM: Connection quality monitor config changed
* @BSS_CHANGED_IBSS: IBSS join status changed
+ * @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -161,10 +161,18 @@ enum ieee80211_bss_change {
BSS_CHANGED_BEACON_ENABLED = 1<<9,
BSS_CHANGED_CQM = 1<<10,
BSS_CHANGED_IBSS = 1<<11,
+ BSS_CHANGED_ARP_FILTER = 1<<12,
/* when adding here, make sure to change ieee80211_reconfig */
};
+/*
+ * The maximum number of IPv4 addresses listed for ARP filtering. If the number
+ * of addresses for an interface increase beyond this value, hardware ARP
+ * filtering will be disabled.
+ */
+#define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4
+
/**
* struct ieee80211_bss_conf - holds the BSS's changing parameters
*
@@ -200,6 +208,15 @@ enum ieee80211_bss_change {
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
* implies disabled
* @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
+ * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
+ * may filter ARP queries targeted for other addresses than listed here.
+ * The driver must allow ARP queries targeted for all address listed here
+ * to pass through. An empty list implies no ARP queries need to pass.
+ * @arp_addr_cnt: Number of addresses currently on the list.
+ * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
+ * filter ARP queries based on the @arp_addr_list, if disabled, the
+ * hardware must not perform any ARP filtering. Note, that the filter will
+ * be enabled also in promiscuous mode.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -220,6 +237,9 @@ struct ieee80211_bss_conf {
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
enum nl80211_channel_type channel_type;
+ __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
+ u8 arp_addr_cnt;
+ bool arp_filter_enabled;
};
/**
@@ -675,9 +695,6 @@ enum ieee80211_smps_mode {
* @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
* powersave documentation below. This variable is valid only when
* the CONF_PS flag is set.
- * @dynamic_ps_forced_timeout: The dynamic powersave timeout (in ms) configured
- * by cfg80211 (essentially, wext) If set, this value overrules the value
- * chosen by mac80211 based on ps qos network latency.
*
* @power_level: requested transmit power (in dBm)
*
@@ -697,7 +714,7 @@ enum ieee80211_smps_mode {
*/
struct ieee80211_conf {
u32 flags;
- int power_level, dynamic_ps_timeout, dynamic_ps_forced_timeout;
+ int power_level, dynamic_ps_timeout;
int max_sleep_period;
u16 listen_interval;
@@ -1445,7 +1462,7 @@ enum ieee80211_filter_flags {
*
* Note that drivers MUST be able to deal with a TX aggregation
* session being stopped even before they OK'ed starting it by
- * calling ieee80211_start_tx_ba_cb(_irqsafe), because the peer
+ * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer
* might receive the addBA frame and send a delBA right away!
*
* @IEEE80211_AMPDU_RX_START: start Rx aggregation
@@ -1529,16 +1546,6 @@ enum ieee80211_ampdu_mlme_action {
* of the bss parameters has changed when a call is made. The callback
* can sleep.
*
- * @configure_arp_filter: Configuration function for hardware ARP query filter.
- * This function is called with all the IP addresses configured to the
- * interface as argument - all ARP queries targeted to any of these
- * addresses must pass through. If the hardware filter does not support
- * enought addresses, hardware filtering must be disabled. The ifa_list
- * argument may be NULL, indicating that filtering must be disabled.
- * This function is called upon association complete with current
- * address(es), and while associated whenever the IP address(es) change.
- * The callback can sleep.
- *
* @prepare_multicast: Prepare for multicast filter configuration.
* This callback is optional, and its return value is passed
* to configure_filter(). This callback must be atomic.
@@ -1640,7 +1647,7 @@ enum ieee80211_ampdu_mlme_action {
* is the first frame we expect to perform the action on. Notice
* that TX/RX_STOP can pass NULL for this parameter.
* Returns a negative error code on failure.
- * The callback must be atomic.
+ * The callback can sleep.
*
* @get_survey: Return per-channel survey information
*
@@ -1678,9 +1685,6 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
u32 changed);
- int (*configure_arp_filter)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct in_ifaddr *ifa_list);
u64 (*prepare_multicast)(struct ieee80211_hw *hw,
struct netdev_hw_addr_list *mc_list);
void (*configure_filter)(struct ieee80211_hw *hw,
@@ -2314,25 +2318,14 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
/**
- * ieee80211_start_tx_ba_cb - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from the add_interface callback
- * @ra: receiver address of the BA session recipient.
- * @tid: the TID to BA on.
- *
- * This function must be called by low level driver once it has
- * finished with preparations for the BA session.
- */
-void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid);
-
-/**
* ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
* @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
* This function must be called by low level driver once it has
- * finished with preparations for the BA session.
- * This version of the function is IRQ-safe.
+ * finished with preparations for the BA session. It can be called
+ * from any context.
*/
void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
u16 tid);
@@ -2351,25 +2344,14 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
/**
- * ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from the add_interface callback
- * @ra: receiver address of the BA session recipient.
- * @tid: the desired TID to BA on.
- *
- * This function must be called by low level driver once it has
- * finished with preparations for the BA session tear down.
- */
-void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid);
-
-/**
* ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
* @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
* This function must be called by low level driver once it has
- * finished with preparations for the BA session tear down.
- * This version of the function is IRQ-safe.
+ * finished with preparations for the BA session tear down. It
+ * can be called from any context.
*/
void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
u16 tid);