summaryrefslogtreecommitdiff
path: root/include/asm-x86/pgtable-3level.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86/pgtable-3level.h')
-rw-r--r--include/asm-x86/pgtable-3level.h175
1 files changed, 0 insertions, 175 deletions
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
deleted file mode 100644
index 75f4276b5ddb..000000000000
--- a/include/asm-x86/pgtable-3level.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef ASM_X86__PGTABLE_3LEVEL_H
-#define ASM_X86__PGTABLE_3LEVEL_H
-
-/*
- * Intel Physical Address Extension (PAE) Mode - three-level page
- * tables on PPro+ CPUs.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
- __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %p(%016Lx).\n", \
- __FILE__, __LINE__, &(e), pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %p(%016Lx).\n", \
- __FILE__, __LINE__, &(e), pgd_val(e))
-
-static inline int pud_none(pud_t pud)
-{
- return pud_val(pud) == 0;
-}
-
-static inline int pud_bad(pud_t pud)
-{
- return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
-}
-
-static inline int pud_present(pud_t pud)
-{
- return pud_val(pud) & _PAGE_PRESENT;
-}
-
-/* Rules for using set_pte: the pte being assigned *must* be
- * either not present or in a state where the hardware will
- * not attempt to update the pte. In places where this is
- * not possible, use pte_get_and_clear to obtain the old pte
- * value and then use set_pte to update it. -ben
- */
-static inline void native_set_pte(pte_t *ptep, pte_t pte)
-{
- ptep->pte_high = pte.pte_high;
- smp_wmb();
- ptep->pte_low = pte.pte_low;
-}
-
-/*
- * Since this is only called on user PTEs, and the page fault handler
- * must handle the already racy situation of simultaneous page faults,
- * we are justified in merely clearing the PTE present bit, followed
- * by a set. The ordering here is important.
- */
-static inline void native_set_pte_present(struct mm_struct *mm,
- unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
- ptep->pte_low = 0;
- smp_wmb();
- ptep->pte_high = pte.pte_high;
- smp_wmb();
- ptep->pte_low = pte.pte_low;
-}
-
-static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
-{
- set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
-}
-
-static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
-{
- set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
-}
-
-static inline void native_set_pud(pud_t *pudp, pud_t pud)
-{
- set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
-}
-
-/*
- * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
- * entry, so clear the bottom half first and enforce ordering with a compiler
- * barrier.
- */
-static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- ptep->pte_low = 0;
- smp_wmb();
- ptep->pte_high = 0;
-}
-
-static inline void native_pmd_clear(pmd_t *pmd)
-{
- u32 *tmp = (u32 *)pmd;
- *tmp = 0;
- smp_wmb();
- *(tmp + 1) = 0;
-}
-
-static inline void pud_clear(pud_t *pudp)
-{
- unsigned long pgd;
-
- set_pud(pudp, __pud(0));
-
- /*
- * According to Intel App note "TLBs, Paging-Structure Caches,
- * and Their Invalidation", April 2007, document 317080-001,
- * section 8.1: in PAE mode we explicitly have to flush the
- * TLB via cr3 if the top-level pgd is changed...
- *
- * Make sure the pud entry we're updating is within the
- * current pgd to avoid unnecessary TLB flushes.
- */
- pgd = read_cr3();
- if (__pa(pudp) >= pgd && __pa(pudp) <
- (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
- write_cr3(pgd);
-}
-
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_PFN_MASK))
-
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *)pud_page(*(pud)) + \
- pmd_index(address))
-
-#ifdef CONFIG_SMP
-static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
-{
- pte_t res;
-
- /* xchg acts as a barrier before the setting of the high bits */
- res.pte_low = xchg(&ptep->pte_low, 0);
- res.pte_high = ptep->pte_high;
- ptep->pte_high = 0;
-
- return res;
-}
-#else
-#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
-#endif
-
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t a, pte_t b)
-{
- return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
-}
-
-static inline int pte_none(pte_t pte)
-{
- return !pte.pte_low && !pte.pte_high;
-}
-
-/*
- * Bits 0, 6 and 7 are taken in the low part of the pte,
- * put the 32 bits of offset into the high part.
- */
-#define pte_to_pgoff(pte) ((pte).pte_high)
-#define pgoff_to_pte(off) \
- ((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
-#define PTE_FILE_MAX_BITS 32
-
-/* Encode and de-code a swap entry */
-#define __swp_type(x) (((x).val) & 0x1f)
-#define __swp_offset(x) ((x).val >> 5)
-#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << 5})
-#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x) ((pte_t){ { .pte_high = (x).val } })
-
-#endif /* ASM_X86__PGTABLE_3LEVEL_H */