summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpi_memhotplug.c2
-rw-r--r--drivers/acpi/executer/exprep.c2
-rw-r--r--drivers/acpi/executer/exresolv.c2
-rw-r--r--drivers/acpi/executer/exstore.c2
-rw-r--r--drivers/acpi/resources/rscreate.c2
-rw-r--r--drivers/acpi/utilities/utobject.c4
-rw-r--r--drivers/base/Kconfig2
-rw-r--r--drivers/char/epca.c2
-rw-r--r--drivers/cpufreq/Kconfig4
-rw-r--r--drivers/hwmon/fschmd.c2
-rw-r--r--drivers/infiniband/hw/mlx4/cq.c2
-rw-r--r--drivers/input/keyboard/atkbd.c2
-rw-r--r--drivers/macintosh/Kconfig2
-rw-r--r--drivers/message/i2o/i2o_scsi.c2
-rw-r--r--drivers/misc/ibmasm/event.c2
-rw-r--r--drivers/misc/phantom.c2
-rw-r--r--drivers/mtd/devices/pmc551.c2
-rw-r--r--drivers/mtd/ubi/eba.c2
-rw-r--r--drivers/mtd/ubi/io.c2
-rw-r--r--drivers/mtd/ubi/scan.c2
-rw-r--r--drivers/mtd/ubi/ubi-media.h4
-rw-r--r--drivers/mtd/ubi/vtbl.c2
-rw-r--r--drivers/mtd/ubi/wl.c4
-rw-r--r--drivers/net/bnx2x_link.c2
-rw-r--r--drivers/net/e1000/e1000_hw.c4
-rw-r--r--drivers/net/slip.h2
-rw-r--r--drivers/net/tehuti.c4
-rw-r--r--drivers/net/tokenring/smctr.c2
-rw-r--r--drivers/net/wireless/atmel.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c4
-rw-r--r--drivers/net/wireless/strip.c2
-rw-r--r--drivers/rtc/rtc-ds1511.c2
-rw-r--r--drivers/rtc/rtc-stk17ta8.c2
-rw-r--r--drivers/s390/block/dasd_eer.c4
-rw-r--r--drivers/s390/char/vmlogrdr.c4
-rw-r--r--drivers/scsi/a100u2w.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c10
-rw-r--r--drivers/scsi/megaraid.c4
-rw-r--r--drivers/scsi/qla1280.c4
-rw-r--r--drivers/scsi/qla4xxx/ql4_mbx.c2
-rw-r--r--drivers/scsi/scsi_error.c2
-rw-r--r--drivers/serial/8250.c2
-rw-r--r--drivers/serial/crisv10.c4
-rw-r--r--drivers/uwb/i1480/dfu/usb.c2
-rw-r--r--drivers/video/console/vgacon.c2
47 files changed, 65 insertions, 65 deletions
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 63a17b55b39b..7a0f4aa4fa1e 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -20,7 +20,7 @@
*
*
* ACPI based HotPlug driver that supports Memory Hotplug
- * This driver fields notifications from firmare for memory add
+ * This driver fields notifications from firmware for memory add
* and remove operations and alerts the VM of the affected memory
* ranges.
*/
diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
index 5d438c32989d..a7dc87ecee37 100644
--- a/drivers/acpi/executer/exprep.c
+++ b/drivers/acpi/executer/exprep.c
@@ -404,7 +404,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
*
* RETURN: Status
*
- * DESCRIPTION: Construct an union acpi_operand_object of type def_field and
+ * DESCRIPTION: Construct a union acpi_operand_object of type def_field and
* connect it to the parent Node.
*
******************************************************************************/
diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c
index 89571b92a522..60e8c47128e9 100644
--- a/drivers/acpi/executer/exresolv.c
+++ b/drivers/acpi/executer/exresolv.c
@@ -146,7 +146,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
stack_desc = *stack_ptr;
- /* This is an union acpi_operand_object */
+ /* This is a union acpi_operand_object */
switch (ACPI_GET_OBJECT_TYPE(stack_desc)) {
case ACPI_TYPE_LOCAL_REFERENCE:
diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c
index 3318df4cbd98..1c118ba78adb 100644
--- a/drivers/acpi/executer/exstore.c
+++ b/drivers/acpi/executer/exstore.c
@@ -274,7 +274,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
*
* PARAMETERS: *source_desc - Value to be stored
* *dest_desc - Where to store it. Must be an NS node
- * or an union acpi_operand_object of type
+ * or a union acpi_operand_object of type
* Reference;
* walk_state - Current walk state
*
diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c
index c0bbfa2c4193..08b8d73e6ee5 100644
--- a/drivers/acpi/resources/rscreate.c
+++ b/drivers/acpi/resources/rscreate.c
@@ -124,7 +124,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
*
* FUNCTION: acpi_rs_create_pci_routing_table
*
- * PARAMETERS: package_object - Pointer to an union acpi_operand_object
+ * PARAMETERS: package_object - Pointer to a union acpi_operand_object
* package
* output_buffer - Pointer to the user's buffer
*
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index c354e7a42bcd..4bef3cfbaccb 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -297,7 +297,7 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size)
*
* RETURN: TRUE if object is valid, FALSE otherwise
*
- * DESCRIPTION: Validate a pointer to be an union acpi_operand_object
+ * DESCRIPTION: Validate a pointer to be a union acpi_operand_object
*
******************************************************************************/
@@ -389,7 +389,7 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object)
{
ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
- /* Object must be an union acpi_operand_object */
+ /* Object must be a union acpi_operand_object */
if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
ACPI_ERROR((AE_INFO,
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index d8e8c49c0cbd..8f006f96ff53 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -54,7 +54,7 @@ config FIRMWARE_IN_KERNEL
such firmware, and do not wish to use an initrd.
This single option controls the inclusion of firmware for
- every driver which uses request_firmare() and ships its
+ every driver which uses request_firmware() and ships its
firmware in the kernel source tree, to avoid a proliferation
of 'Include firmware for xxx device' options.
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 39ad820b2350..af7c13ca9493 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -769,7 +769,7 @@ static int pc_open(struct tty_struct *tty, struct file *filp)
/* Check status of board configured in system. */
/*
- * I check to see if the epca_setup routine detected an user error. It
+ * I check to see if the epca_setup routine detected a user error. It
* might be better to put this in pc_init, but for the moment it goes
* here.
*/
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 5f076aef74fa..a8c8d9c19d74 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -83,7 +83,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
select CPU_FREQ_GOV_USERSPACE
help
Use the CPUFreq governor 'userspace' as default. This allows
- you to set the CPU frequency manually or when an userspace
+ you to set the CPU frequency manually or when a userspace
program shall be able to set the CPU dynamically without having
to enable the userspace governor manually.
@@ -138,7 +138,7 @@ config CPU_FREQ_GOV_USERSPACE
tristate "'userspace' governor for userspace frequency scaling"
help
Enable this cpufreq governor when you either want to set the
- CPU frequency manually or when an userspace program shall
+ CPU frequency manually or when a userspace program shall
be able to set the CPU dynamically, like on LART
<http://www.lartmaker.nl/>.
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 967170368933..8b2d756595d9 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -75,7 +75,7 @@ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
/* minimum pwm at which the fan is driven (pwm can by increased depending on
the temp. Notice that for the scy some fans share there minimum speed.
- Also notice that with the scy the sensor order is different then with the
+ Also notice that with the scy the sensor order is different than with the
other chips, this order was in the 2.4 driver and kept for consistency. */
static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
{ 0x55, 0x65 }, /* pos */
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index a3c5af1d7ec0..de5263beab4a 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
if (err)
goto out;
} else {
- /* Can't be smaller then the number of outstanding CQEs */
+ /* Can't be smaller than the number of outstanding CQEs */
outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
if (entries < outst_cqe + 1) {
err = 0;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index f6e9f39a527b..c3c8b9bc40ae 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -65,7 +65,7 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and
/*
* Scancode to keycode tables. These are just the default setting, and
- * are loadable via an userland utility.
+ * are loadable via a userland utility.
*/
static const unsigned short atkbd_set2_keycode[512] = {
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index b52659620d50..173cf55c64d0 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -138,7 +138,7 @@ config PMAC_BACKLIGHT
Say Y here to enable Macintosh specific extensions of the generic
backlight code. With this enabled, the brightness keys on older
PowerBooks will be enabled so you can change the screen brightness.
- Newer models should use an userspace daemon like pbbuttonsd.
+ Newer models should use a userspace daemon like pbbuttonsd.
config PMAC_BACKLIGHT_LEGACY
bool "Provide legacy ioctl's on /dev/pmu for the backlight"
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 1bcdbbb9e7d3..3d45817e6dcd 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
* @i2o_dev: the I2O device which was added
*
* If a I2O device is added we catch the notification, because I2O classes
- * other then SCSI peripheral will not be received through
+ * other than SCSI peripheral will not be received through
* i2o_scsi_probe().
*/
static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
diff --git a/drivers/misc/ibmasm/event.c b/drivers/misc/ibmasm/event.c
index fda6a4d3bf23..68a0a5b94795 100644
--- a/drivers/misc/ibmasm/event.c
+++ b/drivers/misc/ibmasm/event.c
@@ -50,7 +50,7 @@ static void wake_up_event_readers(struct service_processor *sp)
* Store the event in the circular event buffer, wake up any sleeping
* event readers.
* There is no reader marker in the buffer, therefore readers are
- * responsible for keeping up with the writer, or they will loose events.
+ * responsible for keeping up with the writer, or they will lose events.
*/
void ibmasm_receive_event(struct service_processor *sp, void *data, unsigned int data_size)
{
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index abdebe347383..fa57b67593ae 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -6,7 +6,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * You need an userspace library to cooperate with this driver. It (and other
+ * You need a userspace library to cooperate with this driver. It (and other
* info) may be obtained here:
* http://www.fi.muni.cz/~xslaby/phantom.html
* or alternatively, you might use OpenHaptics provided by Sensable.
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index d38bca64bb15..d2fd550f7e09 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -34,7 +34,7 @@
* aperture size, not the dram size, and the V370PDC supplies no
* other method for memory size discovery. This problem is
* mostly only relevant when compiled as a module, as the
- * unloading of the module with an aperture size smaller then
+ * unloading of the module with an aperture size smaller than
* the ram will cause the driver to detect the onboard memory
* size to be equal to the aperture size when the module is
* reloaded. Soooo, to help, the module supports an msize
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 048a606cebde..25def348e5ba 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -717,7 +717,7 @@ write_error:
* to the real data size, although the @buf buffer has to contain the
* alignment. In all other cases, @len has to be aligned.
*
- * It is prohibited to write more then once to logical eraseblocks of static
+ * It is prohibited to write more than once to logical eraseblocks of static
* volumes. This function returns zero in case of success and a negative error
* code in case of failure.
*/
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index a74118c05745..fe81039f2a7c 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -465,7 +465,7 @@ out:
* This function synchronously erases physical eraseblock @pnum. If @torture
* flag is not zero, the physical eraseblock is checked by means of writing
* different patterns to it and reading them back. If the torturing is enabled,
- * the physical eraseblock is erased more then once.
+ * the physical eraseblock is erased more than once.
*
* This function returns the number of erasures made in case of success, %-EIO
* if the erasure failed or the torturing test failed, and other negative error
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 41d47e1cf15c..ecde202a5a12 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -478,7 +478,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
return 0;
} else {
/*
- * This logical eraseblock is older then the one found
+ * This logical eraseblock is older than the one found
* previously.
*/
if (cmp_res & 4)
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 2ad940409053..8419fdccc79c 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -135,7 +135,7 @@ enum {
* The erase counter header takes 64 bytes and has a plenty of unused space for
* future usage. The unused fields are zeroed. The @version field is used to
* indicate the version of UBI implementation which is supposed to be able to
- * work with this UBI image. If @version is greater then the current UBI
+ * work with this UBI image. If @version is greater than the current UBI
* version, the image is rejected. This may be useful in future if something
* is changed radically. This field is duplicated in the volume identifier
* header.
@@ -187,7 +187,7 @@ struct ubi_ec_hdr {
* (sequence number) is used to distinguish between older and newer versions of
* logical eraseblocks.
*
- * There are 2 situations when there may be more then one physical eraseblock
+ * There are 2 situations when there may be more than one physical eraseblock
* corresponding to the same logical eraseblock, i.e., having the same @vol_id
* and @lnum values in the volume identifier header. Suppose we have a logical
* eraseblock L and it is mapped to the physical eraseblock P.
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 333c8941552f..1afc61e7455d 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -577,7 +577,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
/* Auto re-size flag may be set only for one volume */
if (ubi->autoresize_vol_id != -1) {
- ubi_err("more then one auto-resize volume (%d "
+ ubi_err("more than one auto-resize volume (%d "
"and %d)", ubi->autoresize_vol_id, i);
kfree(vol);
return -EINVAL;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 14901cb82c18..891534f8210d 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -128,7 +128,7 @@
* situation when the picked physical eraseblock is constantly erased after the
* data is written to it. So, we have a constant which limits the highest erase
* counter of the free physical eraseblock to pick. Namely, the WL sub-system
- * does not pick eraseblocks with erase counter greater then the lowest erase
+ * does not pick eraseblocks with erase counter greater than the lowest erase
* counter plus %WL_FREE_MAX_DIFF.
*/
#define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -917,7 +917,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
/*
* We schedule wear-leveling only if the difference between the
* lowest erase counter of used physical eraseblocks and a high
- * erase counter of free physical eraseblocks is greater then
+ * erase counter of free physical eraseblocks is greater than
* %UBI_WL_THRESHOLD.
*/
e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 67de94f1f30e..fefa6ab13064 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
u8 shift = 8*4;
u8 digit;
if (len < 10) {
- /* Need more then 10chars for this format */
+ /* Need more than 10chars for this format */
*str_ptr = '\0';
return -EINVAL;
}
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index d04eef53571e..e1a3fc1303ee 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function simply reads the polarity bit in the
+ * For phy's older than IGP, this function simply reads the polarity bit in the
* Phy Status register. For IGP phy's, this bit is valid only if link speed is
* 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
* return 0. If the link speed is 1000 Mbps the polarity status is in the
@@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function reads the Downshift bit in the Phy
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
* Specific Status register. For IGP phy's, it reads the Downgrade bit in the
* Link Health register. In IGP this bit is latched high, so the driver must
* read it immediately after link is established.
diff --git a/drivers/net/slip.h b/drivers/net/slip.h
index 853e0f6ec710..9ea5c11287d2 100644
--- a/drivers/net/slip.h
+++ b/drivers/net/slip.h
@@ -75,7 +75,7 @@ struct slip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than SLIP buf. */
#ifdef SL_INCLUDE_CSLIP
unsigned long tx_compressed;
unsigned long rx_compressed;
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index a10a83a11d9f..a7a4dc4d6313 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
* skb for rx. It assumes that Rx is desabled in HW
* funcs are grouped for better cache usage
*
- * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be
+ * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
* filled and packets will be dropped by nic without getting into host or
* cousing interrupt. Anyway, in that condition, host has no chance to proccess
* all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
@@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv)
*
* Pushes desc to TxD fifo and overlaps it if needed.
* NOTE: this func does not check for available space. this is responsibility
- * of the caller. Neither does it check that data size is smaller then
+ * of the caller. Neither does it check that data size is smaller than
* fifo size.
*/
static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index a011666342ff..50eb29ce3c87 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev)
* will consequently cause a timeout.
*
* NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit
- * queues other then the one used for the lobe_media_test should be
+ * queues other than the one used for the lobe_media_test should be
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 350157fcd080..4223672c4432 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3836,7 +3836,7 @@ static int reset_atmel_card(struct net_device *dev)
This routine is also responsible for initialising some
hardware-specific fields in the atmel_private structure,
including a copy of the firmware's hostinfo stucture
- which is the route into the rest of the firmare datastructures. */
+ which is the route into the rest of the firmware datastructures. */
struct atmel_private *priv = netdev_priv(dev);
u8 configuration;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 1667065b86a7..823c2bf5e31e 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
/* Step 2. Wait for stop Master Assert
- * (not more then 50us, otherwise ret error */
+ * (not more than 50us, otherwise ret error */
i = 5;
do {
udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
@@ -1830,7 +1830,7 @@ static void ipw2100_down(struct ipw2100_priv *priv)
cancel_delayed_work(&priv->rf_kill);
}
- /* Kill the firmare hang check timer */
+ /* Kill the firmware hang check timer */
if (!priv->stop_hang_check) {
priv->stop_hang_check = 1;
cancel_delayed_work(&priv->hang_check);
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 37ad0d2fb64c..aee9cba13eb3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
* Make room for new data, note that we increase both
* headsize and tailsize when required. The tailsize is
* only needed when ICV data needs to be inserted and
- * the padding is smaller then the ICV data.
- * When alignment requirements is greater then the
+ * the padding is smaller than the ICV data.
+ * When alignment requirements is greater than the
* ICV data we must trim the skb to the correct size
* because we need to remove the extra bytes.
*/
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index dd0de3a9ed4e..7015f2480550 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -236,7 +236,7 @@ struct strip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than STRIP buf. */
unsigned long pps_timer; /* Timer to determine pps */
unsigned long rx_pps_count; /* Counter to determine pps */
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index 23a07fe15a2c..0b6b7730c716 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -630,7 +630,7 @@ ds1511_rtc_init(void)
static void __exit
ds1511_rtc_exit(void)
{
- return platform_driver_unregister(&ds1511_rtc_driver);
+ platform_driver_unregister(&ds1511_rtc_driver);
}
module_init(ds1511_rtc_init);
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index dc0b6224ad9b..7d1547b0070e 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -399,7 +399,7 @@ static __init int stk17ta8_init(void)
static __exit void stk17ta8_exit(void)
{
- return platform_driver_unregister(&stk17ta8_rtc_driver);
+ platform_driver_unregister(&stk17ta8_rtc_driver);
}
module_init(stk17ta8_init);
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index 892e2878d61b..f8e05ce98621 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -535,8 +535,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp)
eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {
kfree(eerb);
MESSAGE(KERN_WARNING, "can't open device since module "
- "parameter eer_pages is smaller then 1 or"
- " bigger then %d", (int)(INT_MAX / PAGE_SIZE));
+ "parameter eer_pages is smaller than 1 or"
+ " bigger than %d", (int)(INT_MAX / PAGE_SIZE));
unlock_kernel();
return -EINVAL;
}
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index aabbeb909cc6..d8a2289fcb69 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -427,7 +427,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
buffer = priv->buffer + sizeof(int);
}
/*
- * If the record is bigger then our buffer, we receive only
+ * If the record is bigger than our buffer, we receive only
* a part of it. We can get the rest later.
*/
if (iucv_data_count > NET_BUFFER_SIZE)
@@ -437,7 +437,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
0, buffer, iucv_data_count,
&priv->residual_length);
spin_unlock_bh(&priv->priv_lock);
- /* An rc of 5 indicates that the record was bigger then
+ /* An rc of 5 indicates that the record was bigger than
* the buffer, which is OK for us. A 9 indicates that the
* record was purged befor we could receive it.
*/
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 3c298c7253ee..964769f66eac 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -633,7 +633,7 @@ static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsig
return FAILED;
}
- /* Reset device is handled by the firmare, we fill in an SCB and
+ /* Reset device is handled by the firmware, we fill in an SCB and
fire it at the controller, it does the rest */
scb->opcode = ORC_BUSDEVRST;
scb->target = target;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 8c64494444bf..311ed6dea726 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport)
uint32_t tmo;
if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
- /* For FAN, timeout should be greater then edtov */
+ /* For FAN, timeout should be greater than edtov */
tmo = (((phba->fc_edtov + 999) / 1000) + 1);
} else {
- /* Normal discovery timeout should be > then ELS/CT timeout
+ /* Normal discovery timeout should be > than ELS/CT timeout
* FC spec states we need 3 * ratov for CT requests
*/
tmo = ((phba->fc_ratov * 3) + 3);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 01dfdc8696f8..a36a120561e2 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
if (unlikely(pring->local_getidx >= max_cmd_idx)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0315 Ring %d issue: portCmdGet %d "
- "is bigger then cmd ring %d\n",
+ "is bigger than cmd ring %d\n",
pring->ringno,
pring->local_getidx, max_cmd_idx);
@@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
/*
- * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+ * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0312 Ring %d handler: portRspPut %d "
- "is bigger then rsp ring %d\n",
+ "is bigger than rsp ring %d\n",
pring->ringno, le32_to_cpu(pgp->rspPutInx),
pring->numRiocb);
@@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
portRspPut = le32_to_cpu(pgp->rspPutInx);
if (portRspPut >= portRspMax) {
/*
- * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+ * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0303 Ring %d handler: portRspPut %d "
- "is bigger then rsp ring %d\n",
+ "is bigger than rsp ring %d\n",
pring->ringno, portRspPut, portRspMax);
phba->link_state = LPFC_HBA_ERROR;
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 7dc62deb4087..9fdcd60c5493 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1967,8 +1967,8 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
scb->state |= aor;
/*
- * Check if this command has firmare owenership. If
- * yes, we cannot reset this command. Whenever, f/w
+ * Check if this command has firmware ownership. If
+ * yes, we cannot reset this command. Whenever f/w
* completes this command, we will return appropriate
* status from ISR.
*/
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 8cb9240596ab..df09820e8916 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -128,7 +128,7 @@
- Integrate ql12160_set_target_parameters() with 1280 version
- Make qla1280_setup() non static
- Do not call qla1280_check_for_dead_scsi_bus() on every I/O request
- sent to the card - this command pauses the firmare!!!
+ sent to the card - this command pauses the firmware!!!
Rev 3.23.15 Beta March 19, 2002, Jes Sorensen
- Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
- Remove a pile of pointless and confusing (srb_t **) and
@@ -659,7 +659,7 @@ static int qla1280_read_nvram(struct scsi_qla_host *ha)
/* The firmware interface is, um, interesting, in that the
* actual firmware image on the chip is little endian, thus,
* the process of taking that image to the CPU would end up
- * little endian. However, the firmare interface requires it
+ * little endian. However, the firmware interface requires it
* to be read a word (two bytes) at a time.
*
* The net result of this would be that the word (and
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index c577d79bd7e8..051b0f5e8c8e 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -392,7 +392,7 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
else
dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d "
- "firmare IOCBs available (%d).\n",
+ "firmware IOCBs available (%d).\n",
IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
return QLA_SUCCESS;
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 381838ebd460..d86ebea9350a 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1650,7 +1650,7 @@ int scsi_error_handler(void *data)
* We use TASK_INTERRUPTIBLE so that the thread is not
* counted against the load average as a running process.
* We never actually get interrupted because kthread_run
- * disables singal delivery for the created thread.
+ * disables signal delivery for the created thread.
*/
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index daa00567bc44..1889a63ebc22 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -3123,7 +3123,7 @@ static int __init serial8250_init(void)
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
- printk(KERN_INFO "Serial: 8250/16550 driver"
+ printk(KERN_INFO "Serial: 8250/16550 driver, "
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8b2c619a09f2..e642c22c80e2 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable output DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
@@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable input DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
if (info->line == 0) {
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
index 686795e97195..c7080d497311 100644
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -387,7 +387,7 @@ int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
goto error_create;
}
- /* setup the fops and upload the firmare */
+ /* setup the fops and upload the firmware */
i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
i1480->mac_fw_name = "i1480-usb-0.0.bin";
i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index e6210725b9ab..d012edda6d11 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1332,7 +1332,7 @@ static void vgacon_save_screen(struct vc_data *c)
c->vc_y = screen_info.orig_y;
}
- /* We can't copy in more then the size of the video buffer,
+ /* We can't copy in more than the size of the video buffer,
* or we'll be copying in VGA BIOS */
if (!vga_is_gfx)